Ros-dev October 2005

ros-dev@reactos.org

76 participants
164 discussions

by James Tabor

Hi all! This is the hivesys.inf PCNet section. I copied fetnd5a.sys to pcnet.sys. I can query network properties w/o a crash! All I get is IPHLPAPI.dll need more work and GetAdapterInfo did not return the expected data. Bus 0, device 18, function 0, Ven 1106/Dev 3065/class 0200. Start->Settings->Settings Menu->Network Properties Select VT6102->Properties, get the VIA PCNet Status Menu, select Properties, get the VIA PCNet Pro~ Menu, select Internet Protocol (TCP/IP), select Properties, get the Error menu. Wow! Did not crash! Need to check if I'm on the right track here! Thanks, James ; ReactOS PCNet NIC driver ; To use the AMD supplied driver change the driver name to pcntn5m.sys ; HKLM,"SYSTEM\CurrentControlSet\Services\PCNet","ErrorControl",0x00010001,0x00000000 HKLM,"SYSTEM\CurrentControlSet\Services\PCNet","Group",0x00000000,"NDIS" HKLM,"SYSTEM\CurrentControlSet\Services\PCNet","ImagePath",0x00020000,"system32\drivers\pcnet.sys" HKLM,"SYSTEM\CurrentControlSet\Services\PCNet","Start",0x00010001,0x00000003 HKLM,"SYSTEM\CurrentControlSet\Services\PCNet","Type",0x00010001,0x00000001 HKLM,"SYSTEM\CurrentControlSet\Services\PCNet\Enum","0",0x00000000,"PCI\VEN_1106&DEV_3065\0000" HKLM,"SYSTEM\CurrentControlSet\Services\PCNet\Enum","Count",0x00010001,0x00000001 HKLM,"SYSTEM\CurrentControlSet\Services\PCNet\Enum","NextInstance",0x00010001,0x00000001 HKLM,"SYSTEM\CurrentControlSet\Enum\PCI\VEN_1106&DEV_3065&SUBSYS_01021106&REV_10\0000","Service",0x00000000,"PCNet" HKLM,"SYSTEM\CurrentControlSet\Enum\PCI\VEN_1106&DEV_3065&SUBSYS_01021106&REV_10\0000","Class",0x00000000,"Net" HKLM,"SYSTEM\CurrentControlSet\Enum\PCI\VEN_1106&DEV_3065&SUBSYS_01021106&REV_10\0000","ClassGUID",0x00000000,"{4D36E972-E325-11CE-BFC1-08002BE10318}" HKLM,"SYSTEM\CurrentControlSet\Enum\PCI\VEN_1106&DEV_3065&SUBSYS_01021106&REV_10\0000","Driver",0x00000000,"{4D36E972-E325-11CE-BFC1-08002BE10318}\0000" ; Configuration Entries for the PCNet Adapter HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","Characteristics",0x00010001,0x00000000 HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","DriverDesc",0x00000000,"VT6102" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","ProviderName",0x00000000,"VIA Tech" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","NetCfgInstanceId",0x00000000,"{RANDOMCFGGUIDFOR_PCNET1}" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000\Linkage","Export",0x00000000,"\Device\PCNet1" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000\Linkage","RootDevice",0x00000000,"PCNet1" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000\Linkage","UpperBind",0x00000000,"Tcpip" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","BUS_TO_SCAN",0x00000000,"ALL" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","BUSTIMER",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","BUSTYPE",0x00000000,"5" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","EXTPHY",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","FDUP",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","LED0",0x00000000,"10000" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","LED1",0x00000000,"10000" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","LED2",0x00000000,"10000" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","LED3",0x00000000,"10000" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","MPMODE",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","TP",0x00000000,"1" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","AdapterCFID",0x00000000,"811929862" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","AdapterType",0x00000000,"5" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","SlotNumber",0x00000000,"8" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","BusNumber",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","FunctionNumber",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","EarlyReceive",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","EarlyTransmit",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","BurstLength",0x00000000,"1" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","ReceiveBurstIndicate",0x00000000,"64" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","ReceiveBuffers",0x00000000,"64" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","TransmitBuffers",0x00000000,"32" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","ReceiveThreshold",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","TransmitThreshold",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","MapRegisters",0x00000000,"32" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","ConnectionType",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","ValidatePacketLen",0x00000000,"1" HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0000","IPXSPXAutoFrame",0x00000000,"0" HKLM,"SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\{RANDOMCFGGUIDFOR_PCNET1}",,0x00000000,"Network Adapters" HKLM,"SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\{RANDOMCFGGUIDFOR_PCNET1}\Connection","Name",0x00000000,"VIA PCNet" HKLM,"SYSTEM\CurrentControlSet\Services\PCNet1\Parameters\Tcpip","DefaultGateway",0x00010000,"10.65.145.1" HKLM,"SYSTEM\CurrentControlSet\Services\PCNet1\Parameters\Tcpip","IPAddress",0x00010000,"10.65.145.79" HKLM,"SYSTEM\CurrentControlSet\Services\PCNet1\Parameters\Tcpip","SubnetMask",0x00010000,"255.255.255.0"

18 years, 2 months

RE: Ros-dev Digest, Vol 14, Issue 25

by Lucio Diaz

David Hinz wrote: Hey guys, when I just translated format, I stunbled over one thing: What if somebody changed the content of a string after I translated it? After some minutes, I had a easy solution for that problem: The En.rc gets a little line in it's head-comment with a revision number. Each time somebody changes or adds a string in the En.rc, he sets the revision number +1 and so all translators have an easy to control indicator, if they need to translate something or not. But I think one thing should be clear, if there just has been corrected a spelling mistake and not something important, the revision number won't be touched. Now some example headers: in the EN.rc: /* * Moved all hardcoded strings to En.rc. * By Magnus Olsen 2005 * * Revision: 1 */ in my De.rc: /* * Moved all hardcoded strings to En.rc. * By Magnus Olsen 2005 * First German Translation by David Hinz 20051010 * * Translated Revision 1 of En.rc */ This is just an idea, but I think this could save a lot of work on bigger applications than format... Greets, David Hinz --------------------------------------- I agree, in fact i am working in a program to manage translation in reactos, i am using Delphi 2.0 but as i am not much skilled (long time since i used pascal) and my time is on the limit it is going slowly but it should work as follow: Part 1: - You select your language - You select the working directory of reactos source. - The program scans all files for en.rc files and list their directories (as their names are all the same). - With each file the program check a text file with a list of en.rc files, and if it is not there it adds it, and it is shown in the GUI as highlighted (pending translation). - If the file is found in the list, it check if translating language file is current--> if it is not current then the file is highlighted (pending translation). - If the file is found in the list, and found a translation file current--> the file is listed but not highlighted. - It does with all rc files till no more rc files in the directory. Part 2: - On clicking in a file in the listbox (highlighted or not) it will be shown in an Richtext edit panel and besides another panel with the material already translated (if there is any language related file already done), if not, the english text will be shown with the "probable translatable" areas highligthed (those between ""). -A save button, that will save the changes in the second panel automatically into the right directory in a language working copy. What do you think? ______________________________________________ Renovamos el Correo Yahoo! Nuevos servicios, más seguridad http://correo.yahoo.es

18 years, 4 months

CodePage Reg Key Error at Boot

by James Tabor

Hi, I'm getting "Couldn't open CodePage registry key. With OK". I copied freeldr.sys and the rest and reinstall everything, including config files from hives. Installs and go. 1st install system, 2nd reboot ok run fine, and 3rd reboot and get the above error at freeldr. Revision: 18820 Node Kind: directory Schedule: normal Last Changed Author: cwittich Last Changed Rev: 18820 Thanks, James

18 years, 9 months

TC function description: opening discussion prior to vote

by Ge van Geldorp

There was some confusion and disagreement about the Testing Coordinator function description recently. The best way to solve it seems to be a vote. With the new voting procedure established and 0.2.8 (almost) out the door, this seems a good time to start the voting process. Our (draft) constitution calls for a 5 day discussion period, followed by a 5 day voting period. This email starts the 5 day discussion period. Preferred location for the discussion is the ros-dev mailing list, since all developers have easy access to that. At the end of the discussion, I'll post a call for votes to the mailing list and create the vote on the forum. We have two proposals for the TC function description, A and B. A is the original function description. Proposal B is almost the same, the only difference is that the TC does not have the authority to block a release. This is the motion I would like to vote on: "Do you want to: A) set the function description for the TC role as described in http://www.reactos.org/wiki/index.php/ReactOS_Testing_Coordinator or B) set the function description for the TC role as described in http://www.reactos.org/wiki/index.php/ReactOS_Testing_Coordinator_Alternate" Gé van Geldorp.

18 years, 10 months

Where to commit?

by Brandon Turner

I have interesting in working on the following programs: C:\WINDOWS\system32\tree.exe C:\WINDOWS\system32\gettype.exe(win2k3) C:\WINDOWS\system32\findstr.exe C:\WINDOWS\system32\w32tm.exe and if I'm feeling extra fiesty maybe C:\WINDOWS\system32\osk.exe Now my question is where i should put these, rospapps or maybe reactos\subsys\system\ ? Brandon

18 years, 10 months

About DirectDraw in reactos

by Magnus Olsen

Hi I am instread to know reactos ddraw.dll party working in windows 1. unpack the files and the files must be in same folder. 2. Double click on the exefile choice the windows mode not the fullscreen mode it will fail other wise. 3. if it working party u will see a gray windows without any dialog error have popup. I am instread in to know which os u runing it and the graphic card. and if u choice windows mode, and the error msg have been popup up or not. if u have not choice windows mode I am not instread. in the reslut. I know fullscreen does bugout and I have not track it down yet. BestReagds Magnus Olsen

18 years, 10 months

New WS2.2 Binary

by Alex Ionescu

Hi All, Thanks for everyone that tested the previous Winsock 2.2 binary and for your reports. Since last week, I've done a lot of bug fixing and implemented new features, and this should reduce the number of crashes you might have seen. As always, please follow the same testing procedure as described in the last email (create a .local file for the .exe and copy the dll in the same directory). I am highly interested in the following apps: Opera, Mozilla, Outlook, P2P Applications, Bittorrent. Changelog: - Made stubs return error instead of success, so calling apps don't crash - Implemented blocking hook/callbacks, which were required for cancelling Async requests and WS1.1 functionality. - Rewrote QuerySetA<->QuerySetW conversion functions as not to overwrite, corrupt the heap and properly convert all the time. - Implemented getprotobyname/getprotobyaddr - Fixed 4 infinite loops which were hit in some cases. - Fixed cleanup on WSACleanup - Fixed SOL_PROTOINFO_A support in getsockopt - Added support for restarting lookup if WSASocketW fails with special error code - Fixed WSALookupService* functions to handle failuers with the right error codes - Added registry notifications for live catalog changes monitoring - Added code to write to the registry if entries are missing - Added RAS Auto-dial helper implementation, still incomplete. Best regards, Alex Ionescu

18 years, 10 months

Move.c from cmd

by Mikhail Y. Zvyozdochkin

Hi all! Two small notes on MOVE command implementation: 1) option /Y isn't described in En.rc (and, ergo, in ALL translations); 2) NOT ALL hardcoded strings was moved from source. Yes, this ConOutPuts will never compiled (under #if 0), but maybe it's better to remove this dead code? WBR, DarkHobbit

18 years, 10 months

Re: [ros-diffs] [weiden] 18883: fix some flags calculations and access rights in CreateNamedPipe and CreatePipe

by Hartmut Birr

weiden(a)svn.reactos.com wrote: > fix some flags calculations and access rights in CreateNamedPipe and CreatePipe > Modified: trunk/reactos/lib/kernel32/file/pipe.c > > ------------------------------------------------------------------------ > *Modified: trunk/reactos/lib/kernel32/file/pipe.c* > --- trunk/reactos/lib/kernel32/file/pipe.c 2005-10-30 13:55:28 UTC (rev 18882) > +++ trunk/reactos/lib/kernel32/file/pipe.c 2005-10-30 14:51:12 UTC (rev 18883) > @@ -86,10 +89,10 @@ > > } > > Status = NtOpenFile(&WritePipeHandle, > > - FILE_GENERIC_WRITE, > > + FILE_GENERIC_WRITE | SYNCHRONIZE, > > &ObjectAttributes, > &StatusBlock, > > - 0, > > + FILE_SHARE_READ | FILE_SHARE_WRITE, > > FILE_SYNCHRONOUS_IO_NONALERT | FILE_NON_DIRECTORY_FILE); > if (!NT_SUCCESS(Status)) > { > This change does break the using of pipes which are created by CreatePipe. Usually it isn't necessary to open the end of the pipe in share mode. Each opening request generates a new instance of a pipe. FILE_SHARE_READ doesn't make sense, because this pipe-end is opened for write access. If FILE_SHARE_READ|FILE_SHARE_WRITE is used, npfs.sys interprets it as a special value and doesn't connect the pipe. This breaks compiling ros on ros. - Hartmut

18 years, 10 months

RE: [ros-svn] [fireball] 18910: I don't think tracert really depe nds on winmm lib.

by Murphy, Ged (Bolton)

No it doesn't. Hadn't noticed it there, thanks. -----Original Message----- From: fireball(a)svn.reactos.com [mailto:fireball@svn.reactos.com] Sent: 31 October 2005 12:00 To: ros-svn(a)reactos.com Subject: [ros-svn] [fireball] 18910: I don't think tracert really depends on winmm lib. I don't think tracert really depends on winmm lib. Updated files: trunk/reactos/apps/utils/net/tracert/tracert.xml _______________________________________________ Ros-svn mailing list Ros-svn(a)reactos.org http://www.reactos.org/mailman/listinfo/ros-svn ************************************************************************ The information contained in this message or any of its attachments is confidential and is intended for the exclusive use of the addressee. The information may also be legally privileged. The views expressed may not be company policy, but the personal views of the originator. If you are not the addressee, any disclosure, reproduction, distribution or other dissemination or use of this communication is strictly prohibited. If you have received this message in error, please contact postmaster(a)exideuk.co.uk <mailto:postmaster@exideuk.co.uk> and then delete this message. Exide Technologies is an industrial and transportation battery producer and recycler with operations in 89 countries. Further information can be found at www.exide.com

18 years, 10 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Ros-dev October 2005