[ros-dev] New CVS Build Dead

[James Tabor]

Alex Ionescu wrote:
>   Richard and I can't get the ros cvs build to
> boot...I get stuck on a 
>  black screen, and he gets a freeze on ndis.sys as well as a blackscreen 
>  if running the bootcd.
>  
>  Can anyone confirm?
>  
>  Best regards,
>  Alex Ionescu 

CVS 10/04/04 11:32:30 last change from arty.


<snip....>

DriverBase for \SystemRoot\System32\kbdus.dll: dd50f000
WL-Status: ReactOS is starting up...
(service/sctrl.c:120) ScDispatcherLoop() called
DriverBase for \SystemRoot\system32\drivers\tcpip.sys: dd989000
(network/router.c:536)(RouterStartup) Called.
(network/route.c:407)(RouteStartup) Called.
(network/neighbor.c:134)(NBStartup) Called.
domaininit starting
(1) Domain internet initializing
Registering protocols for internet
Domaininit done
(network/prefix.c:44)(CreatePLE) Called. IF (0xC081BF18)  Prefix (0xC0819FC8)  L
ength (8).
(network/prefix.c:46)(CreatePLE) Prefix (127.0.0.1).
(network/neighbor.c:277)(NBAddNeighbor) Called. Interface (0xC081BF18)  Address
(0xC0819FC8)  LinkAddress (0x0)  LinkAddressLength (0)  State (0x80)
Assertion 'Address->Type == IP_ADDRESS_V4' failed at network/neighbor.c line
279
KeBugCheckWithTf at ke/catch.c:164
Bug detected (code 1e param 0 0 0 0)
   KMODE_EXCEPTION_NOT_HANDLED

Breakpoint Exception: 3(0)
Processor: 0 CS:EIP 8:c0005974 <ntoskrnl.exe: 5974>
cr2 7ffdd000 cr3 1cf84000 Proc: c07e00c8 Pid: 6 <services> Thrd: c07ed270 Tid: 2
a
DS 10 ES 10 FS 30 GS 10
EAX: 00000051   EBX: 00000010   ECX: 00000000
EDX: 000003f8   EBP: dd861cc8   ESI: c003513a   ESP: dd861c54
EDI: dd861e8a   EFLAGS: 00000282 kESP dd861c54 kernel stack base dd85f000
Frames: <ntoskrnl.exe: 8482a> <tcpip.sys: 28c3d> <tcpip.sys: 1cacd>
<tcpip.sys:
6b51> <tcpip.sys: 47b0> <ntoskrnl.exe: 3523a> <ntoskrnl.exe: 366b6>
<ntoskrnl.ex
e: 35a5> <77F83B34>

After a make clean, still the same,
James