[ros-dev] Re: [ros-svn] [hpoussin] 18453: Remove entries that are created by netcfgx.dll

[James Tabor]

hpoussin(a)svn.reactos.com wrote:
>   Remove entries that are created by netcfgx.dll
>  
>  
>  Updated files:
>  trunk/reactos/bootdata/hivesys.inf
>   
Hi!
Will we need to add entries in hivesys for ROS Ne2K pci (2) driver?

Currently the driver loads but ROS dhclient does not work. All
my other dhclient systems, Win98-2 and XP work.

Thanks,
James

Notes:

I have two net cards installed.

1)

VIA VT6102 Rhine II Fast Ethernet Controller rev. 116, Irq 11, IO 0xe800 [0xe8ff], mem
0xde001000 [0xde001fff], W2k driver not tested yet.


2)
RealTek RTL-8029, IO 0xd000, Irq 11 Ne2K-pci, using ROS ne2000.sys.

My hivesys.inf setup. This works very well.

; NIC drivers are like any other drivers - but no card-specific info here.
; Comment the networking stuff out if you don't have the card and don't want to
see errors
; NE2000 NIC driver
HKLM,"SYSTEM\CurrentControlSet\Services\Ne2000","ErrorControl",0x00010001,0x00000001
HKLM,"SYSTEM\CurrentControlSet\Services\Ne2000","Group",0x00000000,"NDIS"
HKLM,"SYSTEM\CurrentControlSet\Services\Ne2000","ImagePath",0x00020000,"system32\drivers\ne2000.sys"
HKLM,"SYSTEM\CurrentControlSet\Services\Ne2000","Start",0x00010001,0x00000003
HKLM,"SYSTEM\CurrentControlSet\Services\Ne2000","Type",0x00010001,0x00000001
HKLM,"SYSTEM\CurrentControlSet\Services\Ne2000","Route",0x00000000,"Ne20001"

; Configuration Entries for the NE2000 Adapter
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001","Characteristics",0x00010001,0x00000000
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001","DriverDesc",0x00000000,"Ne2000"
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001","ProviderName",0x00000000,"Provider

Name(from Inffile)"
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001","NetCfgInstanceId",0x00000000,"{RANDOMCFGGUIDFOR_NE20001}"
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001\Linkage","Export",0x00000000,"\Device\Ne20001"
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001\Linkage","RootDevice",0x00000000,"Ne20001"
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001\Linkage","UpperBind",0x00000000,"Tcpip"
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001","Port",0x00000000,"D000"
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001","Irq",0x00000000,"B"
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001","NetworkAddress",0x00000000,"001122334455"
HKLM,"SYSTEM\CurrentControlSet\Services\Ne20001\Parameters\Tcpip","DefaultGateway",0x00010000,"10.65.145.1"
HKLM,"SYSTEM\CurrentControlSet\Services\Ne20001\Parameters\Tcpip","IPAddress",0x00010000,"10.65.145.79"
HKLM,"SYSTEM\CurrentControlSet\Services\Ne20001\Parameters\Tcpip","SubnetMask",0x00010000,"255.255.255.0"

HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001","BusType",0x00000000,"5"
;This is from the Registry from Windows 2000

HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001","SlotNumber",0x00000000,"11"
HKLM,"SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0001","BusNumber",0x00000000,"0"
;And this i get from the BIOS bootscreen.