This happens in certain configurations, when the serial port is blocking, such as is the case with com0com. If you disconnect the serial port form the virtual machine, or if you use real hardware, it SHOULD work.

On Tue, 6 Nov 2018 at 17:13, Javier Agustìn Fernàndez Arroyo <elhoir@gmail.com> wrote:
Hello all,

I have just noticed that ReactOS, when in debug configuration, will only boot if an output console is set up.

Won't boot if minicom (for example) is not running...

Is that expected?
_______________________________________________
Ros-dev mailing list
Ros-dev@reactos.org
http://www.reactos.org/mailman/listinfo/ros-dev