Re: [ros-dev] Problems with patchbot/newcc/rosbe

[Daniel Reimer]

I think our mingw32-make is the problem. Even if you ONLY use 
mingw32-make it does not return what it should...


Am 06.03.2012 10:08, schrieb Timo Kreuzer:
>   Am 06.03.2012 01:11, schrieb caemyr(a)myopera.com:
> >   After a quick look into your problems with
> > patchbot it seems that 
> >  vbox scripts were missing some errorlevel checks, which should bail 
> >  out the test run at prepare stage when ISO was not present (which is 
> >  the situation when you dont pass the proper revision/id number. Same 
> >  thing was with newcc1 tests. I added some debug prints so if my 
> >  current solution wont do its job, i`ll at least know bit more about 
> >  the problem.
> >
> >  By that occasion i found out a problem with current ROSBE - its not 
> >  emitting proper ERRORLEVEL at the end of the build, due to 
> >  tee/buildtime/flash/sound playback or any of similar crap that is 
> >  getting the final ERRORLEVEL value. For main building step i hacked 
> >  around this issue by simply checking for ISO file at the end and 
> >  erroring out if its not there. For host building part, this is more 
> >  complicated. I tried removing the stuff mentioned above, but it still 
> >  doesnt work. Dreimer: it would be of help if you could fix this problem.
> >  
>  Why don't you use mingw32-make instead of make?
>
>
>  _______________________________________________
>  Ros-dev mailing list
>  Ros-dev(a)reactos.org
>  http://www.reactos.org/mailman/listinfo/ros-dev
>