Re: [ros-dev] Usb Cromwell Uhci VIA Chip Set Update

[James Tabor]

Hi,
Here is the current state with uhci.sys,


(io/driver.c:632) RegistryKey: \Registry\Machine\System\CurrentControlSet\Servic
es\usbuhci
(io/driver.c:633) Calling driver entrypoint at 9d59c41f
(uhci_main.c:390) ******************** Cromwell UHCI ********************
(uhci_main.c:100) uhci: AddDevice called
(uhci_main.c:167) Done AddDevice
(uhci_main.c:272) AllocRess->Count: 1, PartResList.Count: 2
(uhci_main.c:307) Memory resource: start=0xde000000, length=0x100
(uhci_main.c:284) Interrupt level: 0x0 Interrupt        Vector: 0x9
(uhci-hcd.c:2556) INF: uhci-hcd.c: USB Universal Host Controller Interface drive
r v2.1
(hcd-pci.c:74) usbcore: usb_hcd_pci_probe() called
(../sys/linuxwrapper.c:191) driver_register 0: 9d5cd0b8 9d5c90ad(usb.c:164) INF:
  usb.c: registered new driver hub
(../sys/linuxwrapper.c:191) driver_register 1: 9d5cd114 9d5c8fb0(hcd-pci.c:74) u
sbcore: usb_hcd_pci_probe() called
(../linux/pci_hal.c:13) pci_enable_device() called...
(../linux/pci_hal.c:21) pci_resource_start() called, x=0x0
(../linux/pci_hal.c:33) pci_resource_len() called, x=0x0

Fireball & hpoussin patch,,,
(../linux/pci_hal.c:129) request_mem_region(): addr=0xde000000, len=0x0
(../linux/pci_hal.c:146) ioremap_nocache(): addr=0xde000000, len=0x0

(../linux/pci_hal.c:58) pci_set_drvdata() called...
(hcd-pci.c:163) UnivHCI PCI-USB Controller
(hcd-pci.c:183) irq 9, pci mem 9d5d9000
(hcd.c:678) new USB bus registered, assigned bus number 1
(../linux/pci_hal.c:33) pci_resource_len() called, x=0x0
(../sys/linuxwrapper.c:234) schedule_timeout 15
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:250) schedule DONE!!!!!!
(../sys/linuxwrapper.c:234) schedule_timeout 11
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:77) handle irqs
(../sys/linuxwrapper.c:250) schedule DONE!!!!!!
(uhci-hcd.c:2264) INF: uhci-hcd.c: detected 120 ports
(uhci-hcd.c:2269) INF: uhci-hcd.c: port count misdetected? forcing to 2 ports
(uhci-hcd.c:2098) ERR: uhci: USBCMD_HCRESET timed out!
(hcd.c:400) root hub device address 1
(usb.c:1192) new device strings: Mfr=3, Product=2, SerialNumber=1
(usb.c:1047) USB connected: UnivHCI PCI-USB Controller (XBOX ---- uhci-hcd)
(../sys/linuxwrapper.c:157) drv_num 2 9d5c90ad 9d5c8fb0
(usb.c:1232) usb_new_device: usb-UHCD PCI Slot-0 interface 0
(usb.c:1234) usb_new_device - registering interface 1-0:0

(../sys/linuxwrapper.c:157) drv_num 2 9d5c90ad 9d5c8fb0
(../sys/linuxwrapper.c:171) probe0 9d5c90ad (usb.c:94) usb_device_probe
(usb.c:101) usb_device_probe - got id
(hub.c:586) USB hub found
(hub.c:353) 2 ports detected
(hub.c:368) standalone hub
(hub.c:372) ganged power switching
(hub.c:385) global over-current protection
(hub.c:435) Port indicators are not supported
(hub.c:438) power on to power good time: 2ms
(hub.c:440) hub controller current requirement: 0mA
(hub.c:450) local power source is good
(hub.c:453) no over-current condition exists
(hub.c:275) enabling power on all ports
(../sys/linuxwrapper.c:171) probe1 9d5c8fb0
(uhci_main.c:214) InitLinuxWrapper() done