3 Mar
2005
3 Mar
'05
11:15 p.m.
Hi,
I've fixed the problem. Please try it again.
- Hartmut
Hartmut Birr schrieb:
michael(a)fritscher.net schrieb:
M:\Sandbox\ros_work\reactos>set SVN_EDITOR=notepad
M:\Sandbox\ros_work\reactos>d:\programme\subversion\bin\svn.exe diff
drivers\storage\atapi
Index: drivers/storage/atapi/atapi.c
===================================================================
--- drivers/storage/atapi/atapi.c (revision 13806)
+++ drivers/storage/atapi/atapi.c (working copy)
@@ -1327,6 +1327,8 @@
DrvParms->TMSectorCountHi,
DrvParms->TMSectorCountLo,
(ULONG)((DrvParms->TMSectorCountHi << 16) +
DrvParms->TMSectorCountLo));
+ DPRINT1("SupportedFeatures83: %x, EnabledFeatures86 %x\n",
DrvParms->SupportedFeatures83, DrvParms->EnabledFeatures86);
+ DPRINT1("Max48BitAddress: %I64d\n",
*(PULONGLONG)DrvParms->Max48BitAddress);
if (DrvParms->TMFieldsValid & 0x0004)
{
if ((DrvParms->UltraDmaModes >> 8) && (DrvParms->UltraDmaModes
& 0xff))
@@ -1952,7 +1954,7 @@
{
PREAD_CAPACITY_DATA CapacityData;
PIDE_DRIVE_IDENTIFY DeviceParams;
- ULONG LastSector;
+ LARGE_INTEGER LastSector;
DPRINT("SCSIOP_READ_CAPACITY: TargetId: %lu\n", Srb->TargetId);
CapacityData = (PREAD_CAPACITY_DATA)Srb->DataBuffer;
@@ -1964,15 +1966,34 @@
/* Calculate last sector (big-endian). */
if (DeviceParams->Capabilities & IDE_DRID_LBA_SUPPORTED)
{
- LastSector = (ULONG)((DeviceParams->TMSectorCountHi << 16) +
- DeviceParams->TMSectorCountLo) - 1;
+ if (DeviceExtension->DeviceFlags[Srb->TargetId] & DEVICE_48BIT_ADDRESS)
+ {
+ ((PUSHORT)&LastSector)[0] = DeviceParams->Max48BitAddress[0];
+ ((PUSHORT)&LastSector)[1] = DeviceParams->Max48BitAddress[1];
+ ((PUSHORT)&LastSector)[2] = DeviceParams->Max48BitAddress[2];
+ ((PUSHORT)&LastSector)[3] = DeviceParams->Max48BitAddress[3];
+ LastSector.QuadPart -= 1;
+
+ }
+ else
+ {
+ LastSector.u.HighPart = 0;
+ LastSector.u.LowPart = (ULONG)((DeviceParams->TMSectorCountHi << 16)
+
+ DeviceParams->TMSectorCountLo)-1;
+ }
}
else
{
- LastSector = (ULONG)(DeviceParams->LogicalCyls *
- DeviceParams->LogicalHeads *
- DeviceParams->SectorsPerTrack)-1;
+ LastSector.u.HighPart = 0;
+ LastSector.u.LowPart = (ULONG)(DeviceParams->LogicalCyls *
+ DeviceParams->LogicalHeads *
+ DeviceParams->SectorsPerTrack)-1;
}
+ if (LastSector.u.HighPart)
+ {
+ DPRINT1("Disk is too large for our implementation (%I64d sectors\n",
LastSector.QuadPart);
+ KEBUGCHECK(0);
+ }
CapacityData->LogicalBlockAddress = (((PUCHAR)&LastSector)[0] << 24) |
(((PUCHAR)&LastSector)[1] << 16) |
@@ -1996,10 +2017,8 @@
PIDE_DRIVE_IDENTIFY DeviceParams;
ULONG StartingSector;
ULONG SectorCount;
- UCHAR CylinderHigh;
- UCHAR CylinderLow;
UCHAR DrvHead;
- UCHAR SectorNumber;
+ UCHAR Regs[10];
UCHAR Command;
ULONG Retries;
UCHAR Status;
@@ -2027,22 +2046,44 @@
if (DeviceParams->Capabilities & IDE_DRID_LBA_SUPPORTED)
{
- SectorNumber = StartingSector & 0xff;
- CylinderLow = (StartingSector >> 8) & 0xff;
- CylinderHigh = (StartingSector >> 16) & 0xff;
- DrvHead = ((StartingSector >> 24) & 0x0f) |
- (Srb->TargetId ? IDE_DH_DRV1 : 0) |
- IDE_DH_LBA;
+ if (DeviceExtension->DeviceFlags[Srb->TargetId] & DEVICE_48BIT_ADDRESS)
+ {
+ Regs[1] = 0;
+ Regs[2] = SectorCount & 0xff;
+ Regs[3] = (SectorCount >> 8) & 0xff;
+ Regs[4] = StartingSector & 0xff;
+ Regs[5] = (StartingSector >> 8) & 0xff;
+ Regs[6] = (StartingSector >> 16) & 0xff;
+ Regs[7] = (StartingSector >> 24) & 0xff;
+ Regs[8] = 0;
+ Regs[9] = 0;
+ DrvHead = ((StartingSector >> 24) & 0x0f) |
+ (Srb->TargetId ? IDE_DH_DRV1 : 0) |
+ IDE_DH_LBA;
+ }
+ else
+ {
+ Regs[0] = 0;
+ Regs[2] = SectorCount & 0xff;
+ Regs[4] = StartingSector & 0xff;
+ Regs[5] = (StartingSector >> 8) & 0xff;
+ Regs[6] = (StartingSector >> 16) & 0xff;
+ DrvHead = ((StartingSector >> 24) & 0x0f) |
+ (Srb->TargetId ? IDE_DH_DRV1 : 0) |
+ IDE_DH_LBA;
+ }
}
else
{
- SectorNumber = (StartingSector % DeviceParams->SectorsPerTrack) + 1;
+ Regs[0] = 0;
+ Regs[2] = SectorCount & 0xff;
+ Regs[4] = (StartingSector % DeviceParams->SectorsPerTrack) + 1;
StartingSector /= DeviceParams->SectorsPerTrack;
DrvHead = (StartingSector % DeviceParams->LogicalHeads) |
(Srb->TargetId ? IDE_DH_DRV1 : 0);
StartingSector /= DeviceParams->LogicalHeads;
- CylinderLow = StartingSector & 0xff;
- CylinderHigh = StartingSector >> 8;
+ Regs[5] = StartingSector & 0xff;
+ Regs[6] = StartingSector >> 8;
}
if (DrvHead & IDE_DH_LBA)
@@ -2052,7 +2093,7 @@
DeviceExtension->CommandPortBase,
DrvHead & IDE_DH_DRV1 ? 1 : 0,
((DrvHead & 0x0f) << 24) +
- (CylinderHigh << 16) + (CylinderLow << 8) + SectorNumber,
+ (Regs[6] << 16) + (Regs[5] << 8) + Regs[4],
SectorCount,
Command);
}
@@ -2062,10 +2103,10 @@
(Srb->SrbFlags & SRB_FLAGS_DATA_IN) ? "READ" :
"WRITE",
DeviceExtension->CommandPortBase,
DrvHead & IDE_DH_DRV1 ? 1 : 0,
- CylinderHigh,
- CylinderLow,
+ Regs[6],
+ Regs[5],
DrvHead & 0x0f,
- SectorNumber,
+ Regs[4],
SectorCount,
Command);
}
@@ -2119,13 +2160,23 @@
#endif
/* Setup command parameters */
- IDEWritePrecomp(DeviceExtension->CommandPortBase, 0);
- IDEWriteSectorCount(DeviceExtension->CommandPortBase, SectorCount);
- IDEWriteSectorNum(DeviceExtension->CommandPortBase, SectorNumber);
- IDEWriteCylinderHigh(DeviceExtension->CommandPortBase, CylinderHigh);
- IDEWriteCylinderLow(DeviceExtension->CommandPortBase, CylinderLow);
- IDEWriteDriveHead(DeviceExtension->CommandPortBase, IDE_DH_FIXED | DrvHead);
+ if (DeviceExtension->DeviceFlags[Srb->TargetId] & DEVICE_48BIT_ADDRESS)
+ {
+ IDEWritePrecomp(DeviceExtension->CommandPortBase, Regs[1]);
+ IDEWriteSectorCount(DeviceExtension->CommandPortBase, Regs[3]);
+ IDEWriteSectorNum(DeviceExtension->CommandPortBase, Regs[7]);
+ IDEWriteCylinderLow(DeviceExtension->CommandPortBase, Regs[8]);
+ IDEWriteCylinderHigh(DeviceExtension->CommandPortBase, Regs[9]);
+ }
+ IDEWritePrecomp(DeviceExtension->CommandPortBase, Regs[0]);
+ IDEWriteSectorCount(DeviceExtension->CommandPortBase, Regs[2]);
+ IDEWriteSectorNum(DeviceExtension->CommandPortBase, Regs[4]);
+ IDEWriteCylinderLow(DeviceExtension->CommandPortBase, Regs[5]);
+ IDEWriteCylinderHigh(DeviceExtension->CommandPortBase, Regs[6]);
+
+ IDEWriteDriveHead(DeviceExtension->CommandPortBase, IDE_DH_FIXED|DrvHead);
+
#ifdef ENABLE_DMA
if (DeviceExtension->PRDTable &&
DeviceExtension->DeviceFlags[Srb->TargetId] & DEVICE_DMA_CMD)
@@ -2135,7 +2186,14 @@
if (DeviceExtension->UseDma)
{
Handler = AtapiDmaInterrupt;
- Command = Srb->SrbFlags & SRB_FLAGS_DATA_IN ? IDE_CMD_READ_DMA :
IDE_CMD_WRITE_DMA;
+ if (DeviceExtension->DeviceFlags[Srb->TargetId] & DEVICE_48BIT_ADDRESS)
+ {
+ Command = Srb->SrbFlags & SRB_FLAGS_DATA_IN ? IDE_CMD_READ_DMA_EXT :
IDE_CMD_WRITE_DMA_EXT;
+ }
+ else
+ {
+ Command = Srb->SrbFlags & SRB_FLAGS_DATA_IN ? IDE_CMD_READ_DMA :
IDE_CMD_WRITE_DMA;
+ }
}
else
#endif
@@ -2143,11 +2201,25 @@
Handler = Srb->SrbFlags & SRB_FLAGS_DATA_IN ? AtapiReadInterrupt :
AtapiWriteInterrupt;
if (DeviceExtension->DeviceFlags[Srb->TargetId] &
DEVICE_MULTI_SECTOR_CMD)
{
- Command = Srb->SrbFlags & SRB_FLAGS_DATA_IN ? IDE_CMD_READ_MULTIPLE :
IDE_CMD_WRITE_MULTIPLE;
+ if (DeviceExtension->DeviceFlags[Srb->TargetId] &
DEVICE_48BIT_ADDRESS)
+ {
+ Command = Srb->SrbFlags & SRB_FLAGS_DATA_IN ?
IDE_CMD_READ_MULTIPLE_EXT : IDE_CMD_WRITE_MULTIPLE_EXT;
+ }
+ else
+ {
+ Command = Srb->SrbFlags & SRB_FLAGS_DATA_IN ? IDE_CMD_READ_MULTIPLE
: IDE_CMD_WRITE_MULTIPLE;
+ }
}
else
{
- Command = Srb->SrbFlags & SRB_FLAGS_DATA_IN ? IDE_CMD_READ :
IDE_CMD_WRITE;
+ if (DeviceExtension->DeviceFlags[Srb->TargetId] &
DEVICE_48BIT_ADDRESS)
+ {
+ Command = Srb->SrbFlags & SRB_FLAGS_DATA_IN ? IDE_CMD_READ_EXT :
IDE_CMD_WRITE_EXT;
+ }
+ else
+ {
+ Command = Srb->SrbFlags & SRB_FLAGS_DATA_IN ? IDE_CMD_READ :
IDE_CMD_WRITE;
+ }
}
}
@@ -2274,7 +2346,9 @@
ScsiPortStallExecution(10);
/* Issue command to drive */
- AtapiExecuteCommand(DeviceExtension, IDE_CMD_FLUSH_CACHE, AtapiNoDataInterrupt);
+ AtapiExecuteCommand(DeviceExtension,
+ DeviceExtension->DeviceFlags[Srb->TargetId] &
DEVICE_48BIT_ADDRESS ? IDE_CMD_FLUSH_CACHE_EXT : IDE_CMD_FLUSH_CACHE,
+ AtapiNoDataInterrupt);
/* Wait for controller ready */
for (Retries = 0; Retries < IDE_MAX_WRITE_RETRIES; Retries++)
Index: drivers/storage/atapi/atapi.h
===================================================================
--- drivers/storage/atapi/atapi.h (revision 13806)
+++ drivers/storage/atapi/atapi.h (working copy)
@@ -64,21 +64,27 @@
#define IDE_REG_COMMAND 0x0007
/* IDE/ATA commands */
-#define IDE_CMD_RESET 0x08
-#define IDE_CMD_READ 0x20
-#define IDE_CMD_READ_RETRY 0x21
-#define IDE_CMD_WRITE 0x30
-#define IDE_CMD_WRITE_RETRY 0x31
-#define IDE_CMD_PACKET 0xA0
-#define IDE_CMD_READ_MULTIPLE 0xC4
-#define IDE_CMD_WRITE_MULTIPLE 0xC5
-#define IDE_CMD_READ_DMA 0xC8
-#define IDE_CMD_WRITE_DMA 0xCA
-#define IDE_CMD_FLUSH_CACHE 0xE7
-#define IDE_CMD_FLUSH_CACHE_EXT 0xEA
-#define IDE_CMD_IDENT_ATA_DRV 0xEC
-#define IDE_CMD_IDENT_ATAPI_DRV 0xA1
-#define IDE_CMD_GET_MEDIA_STATUS 0xDA
+#define IDE_CMD_RESET 0x08
+#define IDE_CMD_READ 0x20
+#define IDE_CMD_READ_ONCE 0x21
+#define IDE_CMD_READ_EXT 0x24 /* 48 bit */
+#define IDE_CMD_READ_DMA_EXT 0x25 /* 48 bit */
+#define IDE_CMD_READ_MULTIPLE_EXT 0x29 /* 48 bit */
+#define IDE_CMD_WRITE 0x30
+#define IDE_CMD_WRITE_ONCE 0x31
+#define IDE_CMD_WRITE_EXT 0x34 /* 48 bit */
+#define IDE_CMD_WRITE_DMA_EXT 0x35 /* 48 bit */
+#define IDE_CMD_WRITE_MULTIPLE_EXT 0x39 /* 48 bit */
+#define IDE_CMD_PACKET 0xA0
+#define IDE_CMD_READ_MULTIPLE 0xC4
+#define IDE_CMD_WRITE_MULTIPLE 0xC5
+#define IDE_CMD_READ_DMA 0xC8
+#define IDE_CMD_WRITE_DMA 0xCA
+#define IDE_CMD_FLUSH_CACHE 0xE7
+#define IDE_CMD_FLUSH_CACHE_EXT 0xEA /* 48 bit */
+#define IDE_CMD_IDENT_ATA_DRV 0xEC
+#define IDE_CMD_IDENT_ATAPI_DRV 0xA1
+#define IDE_CMD_GET_MEDIA_STATUS 0xDA
//
// Access macros for command registers
Seems to be a bug betweeb VMware 4.5.2 and ros,
because on real HW it
works well (almost, because I get a BSOD during the reboot after be second
stage install, yust after clicking the reboot-botton)
It's not a bug in vmware. I've made a little mistake. The drive head
register isn't set correctly in 48bit mode. I've update my old vmware
beta. I will send a new patch if it works in vmware.
- Hartmut
_______________________________________________
Ros-dev mailing list
Ros-dev(a)reactos.com
http://reactos.com:8080/mailman/listinfo/ros-dev