Re: [ros-dev] RE: [ros-kernel] BootCD doesn't boot...

[Richard Campbell]

But if you use an OLD binutils then you get a crash.

Casper Hornstrup wrote:

>  You a using a too new binutils? I think it was thomas
> that spotted
> that the support for forwarded exports is broken in the new release
> of binutils.
>
> Casper
>
>   
>
> >  -----Original Message-----
> > From: ros-dev-bounces(a)reactos.com 
> > [mailto:[e-mail]] On Behalf Of Richard Campbell
> > Sent: 28. september 2004 22:08
> > To: ReactOS Development List
> > Subject: Re: [ros-dev] RE: [ros-kernel] BootCD doesn't boot...
> >
> > That's WITH atapi debug messages on and a clean make.
> >
> > (ke/i386/kernel.c:311) CPU supports PAE mode
> > (ke/i386/kernel.c:322) CPU doesn't run in PAE mode
> > (ke/i386/kernel.c:327) CPU Vendor: AuthenticAMD
> > (ke/i386/kernel.c:331) CPU Model:  AMD Athlon(tm) XP 2200+
> > (ke/i386/kernel.c:334) Ke386CacheAlignment: 64
> > (ke/i386/kernel.c:337) Ke386L1CacheSize: 128kB
> > (ke/i386/kernel.c:341) Ke386L2CacheSize: 256kB DriverBase for 
> > \SystemRoot\system32\drivers\pci.sys: dcc02000 Peripheral 
> > Component Interconnect Bus Driver DriverBase for 
> > scsiport.sys: dcc0c000 DriverBase for atapi.sys: dcc19000
> > (ldr/loader.c:1468) LdrPEGetExportByName(): failed to find 
> > NTOSKRNL.RtlConvertUlongToLargeInteger
> > (ldr/loader.c:1553) Failed to import
> > NTOSKRNL.RtlConvertUlongToLargeInteger from scsiport.sys 
> > DriverBase for class2.sys: dcc27000 DriverBase for cdrom.sys: 
> > dcc31000 DriverBase for disk.sys: dcc39000 DriverBase for 
> > vfatfs.sys: dcc42000 DriverBase for bootvid.sys: dcc57000 
> > DriverBase for cdfs.sys: dcc78000 DriverBase for ndis.sys: dcc85000
> > (io/arcname.c:56) IoCreateArcNames() called
> > (io/arcname.c:61) Floppy drives: 0
> > (io/arcname.c:86) Disk drives: 0
> > (io/arcname.c:163) CD-ROM drives: 0
> > (io/arcname.c:187) IoCreateArcNames() done
> > (io/arcname.c:346) multi(0)disk(0)cdrom(159)\reactos /MININT 
> > /DEBUGPORT=COM1
> > (io/arcname.c:353) multi(0)disk(0)cdrom(159)\reactos
> > (io/arcname.c:359) Boot path: \reactos
> > (io/arcname.c:368) ARC name: multi(0)disk(0)cdrom(159)
> > (io/arcname.c:375) Booting from CD-ROM!
> > (io/arcname.c:319) Could not find ntoskrnl.exe 
> > IoCreateSystemRootLink FAILED: (0xc0000001) - 
> > %KERNEL-WRN-UNSUCCESSFUL UNSUCCESSFUL KeBugCheck at 
> > ke/main.c:687 Bug detected (code 7b param 0 0 0 0)
> >   INACCESSIBLE_BOOT_DEVICE
> >
> >
> > Frames: <ntoskrnl.exe: a859> <ntoskrnl.exe: a879> <C0082E12>
> > <ntoskrnl.exe: c0a9> <C0083681> <ntoskrnl.exe: 115c>
> >
> >
> > Hartmut Birr wrote:
> >
> >     
> >
> > >   
> > >
> > >       
> > >
> > > >  -----Original Message-----
> > > > From: ros-dev-bounces(a)reactos.com 
> > > > [mailto:[e-mail]] On Behalf Of Richard Campbell
> > > > Sent: Tuesday, September 28, 2004 9:37 PM
> > > > To: ReactOS Development List
> > > > Subject: Re: [ros-dev] RE: [ros-kernel] BootCD doesn't boot...
> > > >
> > > >
> > > > Sorry, it got truncated:
> > > >
> > > > http://rafb.net/paste/results/3p680b91.html
> > > >
> > > > Richard Campbell wrote:
> > > >
> > > >    
> > > >
> > > >         
> > > >  
> > > (io/arcname.c:163) CD-ROM drives: 0
> > >
> > > There wasn't detected a cdrom drive. The next step is, you 
> > >       
> > >  
> > should enable the
> >     
> >
> > >  debug prints from atapi.c.
> > >
> > > - Hartmut
> > >
> > >
> > > _______________________________________________
> > > Ros-dev mailing list
> > > Ros-dev(a)reactos.com
> > > http://reactos.com:8080/mailman/listinfo/ros-dev
> > >
> > >  
> > >
> > >       
> > >  
> > _______________________________________________
> > Ros-dev mailing list
> > Ros-dev(a)reactos.com
> > http://reactos.com:8080/mailman/listinfo/ros-dev
> >
> >     
> >  
> _______________________________________________
> Ros-dev mailing list
> Ros-dev(a)reactos.com
> http://reactos.com:8080/mailman/listinfo/ros-dev
>
>   
>