19 Jan
2006
19 Jan
'06
8 p.m.
Beautiful. I am happy. Alex, from what i have seen, i agree with the "black
sheep" statement. I haven't seen a better msg on the list since this. Now
that makes me feel that my work is done.
I will continue to watch the project, but i feel to useless not working on
it, and realy am not comfortable with the code (I am a *n*x clone kernel
programer myself ). I plan to write an OS of my own soon ( "AHGG, Not
another enama!!!" ) and may look for help. I will keep a link on my site up
to reactos.org, but for now, until a day i am needed again...
brian
friend of reactos
my site: <psudobuddha's site> <http://www.metawire.org/%7Epsudobuddha>
On 1/19/06, Alex Ionescu <ionucu(a)videotron.ca> wrote:
Hi,
I'm going to answer generically, not point-by-point, since I don't have
much time, but I hope I can cover everything:
1) Those magic sizes were calculated in my head and I didn't have time
to make them into constants as I did many of them.
0x29C is the pre-defined value of NPX_FRAME_LENGTH + KTRAP_FRAME_LENGTH.
0x48 is the differerence in the KTRAP_FRAME between the registers that
we will skip. I could've done (KTRAP_FRAME_XXX - KTRAP_FRAME_YYY).
2) This is not a matter of driver compatibility. The fast system call
stub is a mostly hardware-defined entrypoint, handled by low-level
software logic. In implementing it, there are only 3 available sources
of information: Whatever minimal info the Intel manual gives, the Linux
sources, the Windows kernel binary. It is almost simply impossible to
"guess" how the stub should work. Filip tried to make it work more then
a year ago, and even he gave up (the AMD version), beacuse it is simply
too hard and confusing unless you have some available code to look at.
As such, my first and foremost source was the Linux source code. It
helped me understand how to setup the LSTAR MSR register, as well as the
other register values. Then, through several mailing list posts, I was
able to understand some bugs in the way ReactOS had its segments set up,
which caused problems in the code. Then, to understand the way Windows
chose between INT2E and SYSENTER, I found a document online written by a
person called Elicz, which described the stub and what it should do,
much in the same way people argued "clean-room reverse engineering" is
done. With this information, I was able to write more then 85% of the
stub. My next, and final remaining possible step, was to use IDA to look
at the Windows code. I used it as a learning tool, not as a copying
tool. It is hard to argue that what I did was "Reverse-engineering",
which, to my knowledge, implies taking something apart to re-create it,
since this usually implies converting the assembly code to functional C
code or otherwise. But I don't view as looking at assembly in order to
understand a low-level hardware interface as "reverse engineering". And
yes, as described above, it -was- my last choice. Additionally, the
parts which were supposedly "copied" are NOT part of the functional part
of the code. They are debug helpers, offering nothing else but
assertions in case of problems.
3) I find the idea of removing code that "Violates policy" ludicrous. No
one has the right to dermine if some piece of code violates policy or
not, especially if the author writing it denies it. Only a judge or
lawyer should be able to make that decision. Additionally, in this
specific case, what could be done? The code is in SVN and even if
rewritten it will 1) look the same, excpt "edx" would become "esi"
and
vice-versa 2) a judge would still argue that "hey, you had the previous
code in SVN for over a year, you've all been tainted and could've just
as easily looked at it". Furthermore, such attitude might start
devolving into a dangerous witchhunt. Don't like someone's code? Report
them and have it removed! This communist-era and fascist-era behaviour
deeply scares me and reminds me of a country and regime which I fled. I
do not want to see it happen, because it would slowly kill and rip apart
this project.
These monthly Alex-bashings are starting to tire me very much and maybe
it's time I took an offensive position instead of a defensive one. I do
not want to start naming names, but many of our developers have already
violated our policy in different ways. If you actively start enforcing
it, then it will be my duty as an active developer to enforce it as
well, meaning that hiding any information I have concerning other
developers' violations would be considered as complicity, so I would be
legally bound to report them. In other words, this would mean that the
project would lose half of its developers.
I am sick of being treated as the black sheep and the "example". This
stops here. I have always been put in the spotlight for almost any
action I took, and I've always taken steps to repair it. But these
public trials of guilt have passed a limit. Either start questionning
everyone and treating every developer the same, or stop using me as a
tool.
Best regards,
Alex Ionescu
Steven Edwards wrote:
On 1/19/06, WaxDragon <waxdragon(a)gmail.com>
wrote:
Once again he may have stated this but he also states he disassembled
Windows. The issue is the methods used to gather the information.
Reverse engineering is legal if there is no other method to gather the
information which is why I clearly asked "Was there no other way to
get this information" or let me put it another way....
Alex: did you even bother doing some sort of clean room examination of
Windows behavior based on third party drivers or some sort of testing
or was IDA your first step? Checked Microsoft driver assertions and
debug symbols don't count.
No its perfectly a valid question. In law there is this concept called
Mens Rea which means intent. Was his intent to create a independent
unique work he himself created and he just needed the information for
compatibly reasons or did he intend to just make it work without
caring of the consequences to everyone else. Hence the question above.
Was IDA the first step or the last?
Hmm ok. So another size won't work? Where is it predefined? I ask not
to accuse but to try to understand to be fair to all parties involved.
But according to Hartmut this is a clear case of copy and paste. This
is why we cannot allow this to continue. If dirty-room reverse
engineering was the last resort then it would be a original
implementation
_______________________________________________
Ros-dev mailing list
Ros-dev(a)reactos.org
http://www.reactos.org/mailman/listinfo/ros-dev
You are not a judge with years of experience in
law. Whether or not
you have any kernel internal knowledge is also irrelevant to this
thought experiment.
No but I am someone trying to be objective that has spent a good part
of the past few years reviewing case history for reverse engineering
cases. Its more than we are going tot get from some judges.
Why did
you have to do this? Is it not possible to write a driver that
abuses fastcall to make a mostly working implementation without having
to 1. look at and 2. copy the existing object code of Windows?
Alex clearly stated that there is only one way to perform that stack
check, let's quote him properly:
"Note however, that there is only one way to check the stack: cmp ebp,
esp. Unless you want to consider cmp esp, ebp as an alternate method."
As Casper said, it is legal to use that information, but not legal to
*copy/paste* it into ReactOS. Alex clearly comprehends what that bit
of assembly does.
OK so
someone else sneaked something in that violates the rules and it
was not caught. Lets just check your argument for a moment and say you
could be wrong about your development methods. Being ..."clearly
commented, organized and structured..." does not amount to a hill of
beans if I am violating the law and or project rules. I can make bank
robbing plans that are "...clearly commented, organized and
structured..." I don't think that will gain me much ground in court.
This analogy is invalid. The legality of this issue stems directly
from whether or not he wrote the code. Robbing a bank is _always_
illegal, writing code is only illegal if you copy/paste it from a
legitimate author, or implement a patented method.
Alex's structured and commented code
demonstrates comprehension. In
this case, where the code's function is clear, and constrained by
implementation details, the code will be similar by anyone who
implements it. Alex's comments and code structure shows that he
understands what is going on in the assembly, and most likely shows
that he wrote the code, as opposed to just copy/pasting existing code.
Just because he understands the code now is irrelevant. Its the method
of which that understanding came. Because our work is going to be
similar to windows the arguments about a derived work hangs upon the
notion that we are independently creating our own implementation
rather than looking at the original. We can read documentation about
the original all day long, we can examine applications and drivers
that use the original all day long but when we start to crack open the
book of the original implementation we run the legal risk of being
declared a derived work.
It only looks suspicious since you are not a
kernel developer. Again,
not something a judge would concern himself with. Now the
prosecutor.....
> /* Skip the other registers */
> sub esp, 0x48
>
>
>
<snip>
ie. why
0x29C, why 0x48?
Since he is making room on the stack for another frame, this is a
predefined size.
further. Now, I do agree he could have used the
safer "clean-room"
method, but I'm not convinced that it would have yielded a
significantly different implementation, and we might still be in the
same position.
You admit that his implementation was not based on "clean-room". My
question once again was why did it have to be dirty room? If there is
no other option for making a compatible implementation then this
discussion holds no water but if by your own words he could have used
a safer method then there is a problem.
So we are back to the first question. What development methods were
used. IDA first or last?
--
Steven Edwards - ReactOS and Wine developer
"There is one thing stronger than all the armies in the world, and
that is an idea whose time has come." - Victor Hugo
_______________________________________________
Ros-dev mailing list
Ros-dev(a)reactos.org
http://www.reactos.org/mailman/listinfo/ros-dev