RE: [ros-kernel] BootCD doesn't boot...

[Hartmut Birr]

Hi,

can you disable line #32 (#define NDEBUG)in ntoskrnl\io\arcname.c and try it
again?

- Hartmut
> -----Original Message-----
> From: [e-mail] 
> [mailto:[e-mail]] On Behalf Of Richard Campbell
> Sent: Tuesday, September 28, 2004 7:34 PM
> To: [e-mail]
> Subject: [ros-kernel] BootCD doesn't boot...
>
> Hello all
>
> I'm using a fresh CVS checkout and ROS fails to boot in 
> either VMWare or 
> QEMU via the iso built by mingw32-make bootcd.
>
> Attached is a screen.

[Richard Campbell]

Same result, different addresses, see screen
Hartmut Birr wrote:
> Hi,
>
> can you disable line #32 (#define NDEBUG)in ntoskrnl\io\arcname.c and try it
> again?
> Hartmut
> > -----Original Message-----
> > From: [e-mail] 
> > [mailto:[e-mail]] On Behalf Of Richard Campbell
> > Sent: Tuesday, September 28, 2004 7:34 PM
> > To: [e-mail]
> > Subject: [ros-kernel] BootCD doesn't boot...
> >
> > Hello all
> >
> > I'm using a fresh CVS checkout and ROS fails to boot in 
> > either VMWare or 
> > QEMU via the iso built by mingw32-make bootcd.
> >
> > Attached is a screen.
>
> Ros-dev mailing list
> [e-mail]
> http://reactos.com:8080/mailman/listinfo/ros-dev

[Royce Mitchell III]

With the bootcd you need to add /DEBUGPORT=SCREEN and possibly 
/DEBUGPORT=COM1, too, and configure VMWare to dump serial to a file. 
Otherwise, you won't see the extra details from the change in io/arcname.c
Richard Campbell wrote:
> Same result, different addresses, see screen
> Hartmut Birr wrote:
> > Hi,
> >
> > can you disable line #32 (#define NDEBUG)in ntoskrnl\io\arcname.c and 
> > try it
> > again?
> > Hartmut
> > > -----Original Message-----
> > > From: [e-mail] 
> > > [mailto:[e-mail]] On Behalf Of Richard Campbell
> > > Sent: Tuesday, September 28, 2004 7:34 PM
> > > To: [e-mail]
> > > Subject: [ros-kernel] BootCD doesn't boot...
> > >
> > > Hello all
> > >
> > > I'm using a fresh CVS checkout and ROS fails to boot in either 
> > > VMWare or QEMU via the iso built by mingw32-make bootcd.
> > >
> > > Attached is a screen.
> >
> > Ros-dev mailing list
> > [e-mail]
> > http://reactos.com:8080/mailman/listinfo/ros-dev
>
> Ros-dev mailing list
> [e-mail]
> http://reactos.com:8080/mailman/listinfo/ros-dev
-- 
------------------------
http://wecanstopspam.org

[Richard Campbell]

and how exactly do you do this with the bootcd?

Royce Mitchell III wrote:
> With the bootcd you need to add /DEBUGPORT=SCREEN and possibly 
> /DEBUGPORT=COM1, too, and configure VMWare to dump serial to a file. 
> Otherwise, you won't see the extra details from the change in 
> io/arcname.c
> Richard Campbell wrote:
> > Same result, different addresses, see screen
> > Hartmut Birr wrote:
> > > Hi,
> > >
> > > can you disable line #32 (#define NDEBUG)in ntoskrnl\io\arcname.c 
> > > and try it
> > > again?
> > > Hartmut
> > > > -----Original Message-----
> > > > From: [e-mail] 
> > > > [mailto:[e-mail]] On Behalf Of Richard Campbell
> > > > Sent: Tuesday, September 28, 2004 7:34 PM
> > > > To: [e-mail]
> > > > Subject: [ros-kernel] BootCD doesn't boot...
> > > >
> > > > Hello all
> > > >
> > > > I'm using a fresh CVS checkout and ROS fails to boot in either 
> > > > VMWare or QEMU via the iso built by mingw32-make bootcd.
> > > >
> > > > Attached is a screen.
> > >
> > > Ros-dev mailing list
> > > [e-mail]
> > > http://reactos.com:8080/mailman/listinfo/ros-dev
> >
> > Ros-dev mailing list
> > [e-mail]
> > http://reactos.com:8080/mailman/listinfo/ros-dev

[Hartmut Birr]

Hi,

I would like to see the debug prints. Sorry, I'm using always a modified
kernel which prints debug messages to the bochs debug port and I've patched
my qemu to display this debug output. I can send my modified qemu.exe
(zipped 275kB) or a diff to the 0.6.0 sources. For the diff I need a little
bit more time.

- Hartmut
> -----Original Message-----
> From: [e-mail] 
> [mailto:[e-mail]] On Behalf Of Richard Campbell
> Sent: Tuesday, September 28, 2004 9:04 PM
> To: ReactOS Development List
> Subject: Re: [ros-dev] RE: [ros-kernel] BootCD doesn't boot...
>
> Same result, different addresses, see screen