ROS 21010: KMODE on start of installer

[Reuben Perelman]

I'm getting a KMODE_EXCEPTION_NOT_HANDLED on bootup of ROS 21010 on QEMU.

Technical information:

***STOP: 0x0000001E (0xc0000005,0x7c90b49,0x0000000,0x0000000)
Page Fault Exception: 14(0)
Processor: 0 CS:EIP 1b:7c907b49
cr2 0 cr3 567000 Proc: 009a02a0
DS 23 ES 23 FS 3v GS -
EAX: 00000000   EBX: 0000001   ECX: 0000002
EDX: 00000003   EBP: 0000000   ESI: 0000008
NTDDK: Pageable code called at IRQL > APC_LEVEL (31)
Assertion 'FALSE' failed at ./ntoskrnl/ob/handle.c line 888

[Reuben Perelman]

By bootup, I meant the bootup of the installer cd.

Reuben Perelman wrote:

>   I'm getting a KMODE_EXCEPTION_NOT_HANDLED on
> bootup of ROS 21010 on QEMU.
>
>  Technical information:
>
>  ***STOP: 0x0000001E (0xc0000005,0x7c90b49,0x0000000,0x0000000)
>  Page Fault Exception: 14(0)
>  Processor: 0 CS:EIP 1b:7c907b49
>  cr2 0 cr3 567000 Proc: 009a02a0
>  DS 23 ES 23 FS 3v GS -
>  EAX: 00000000   EBX: 0000001   ECX: 0000002
>  EDX: 00000003   EBP: 0000000   ESI: 0000008
>  NTDDK: Pageable code called at IRQL > APC_LEVEL (31)
>  Assertion 'FALSE' failed at ./ntoskrnl/ob/handle.c line 888
>  _______________________________________________
>  Ros-dev mailing list
>  Ros-dev(a)reactos.org
>  http://www.reactos.org/mailman/listinfo/ros-dev
>

[WaxDragon]

I see this error when using the kqemu module.  Are you using kqemu?

On 1/24/06, Reuben Perelman <reub2000(a)earthlink.net> wrote:
>   I'm getting a KMODE_EXCEPTION_NOT_HANDLED on
> bootup of ROS 21010 on QEMU.
>
>  Technical information:
>
>  ***STOP: 0x0000001E (0xc0000005,0x7c90b49,0x0000000,0x0000000)
>  Page Fault Exception: 14(0)
>  Processor: 0 CS:EIP 1b:7c907b49
>  cr2 0 cr3 567000 Proc: 009a02a0
>  DS 23 ES 23 FS 3v GS -
>  EAX: 00000000   EBX: 0000001   ECX: 0000002
>  EDX: 00000003   EBP: 0000000   ESI: 0000008
>  NTDDK: Pageable code called at IRQL > APC_LEVEL (31)
>  Assertion 'FALSE' failed at ./ntoskrnl/ob/handle.c line 888
>  _______________________________________________
>  Ros-dev mailing list
>  Ros-dev(a)reactos.org
>  http://www.reactos.org/mailman/listinfo/ros-dev
>  

--
<Alex_Ionescu> it's like saying let's rename Ke to Kernel because
people think it's Ketchup

[Thomas Weidenmueller]

WaxDragon wrote:
>   I see this error when using the kqemu module.  Are you
> using kqemu? 
A stack trace really would be helpful.

- Thomas

[WaxDragon]

As I told you on IRC, there is no stack trace be had.  When I hit this
in my KDBG build, I only get one frame.

ford@phoenix:~/public/virtuals/qemu/reactos$ tail -f debug.out
(./ntoskrnl/ke/main.c:291)
---------------------------------------------------------------
(./ntoskrnl/ke/main.c:292) ReactOS 0.3-SVN (Build 20060123-r20999)
Used memory 65536Kb
(./ntoskrnl/mm/mminit.c:387) Kernel Stack Limits. InitTop =
0x800cb000, Init = 0x800c8000
(./ntoskrnl/mm/mm.c:283) No current process
(./ntoskrnl/ldr/loader.c:267) Could not open module file:
\SystemRoot\System32\drivers\ne2000.sys (Status 0xc0000001)
(./ntoskrnl/io/pnpmgr.c:2170) Initialization of service ne2000 failed
(Status c0000001)
(./ntoskrnl/ldr/loader.c:267) Could not open module file:
\SystemRoot\System32\drivers\pciide.sys (Status 0xc0000001)
(./ntoskrnl/io/pnpmgr.c:2170) Initialization of service pciide failed
(Status c0000001)
(./ntoskrnl/ldr/loader.c:267) Could not open module file:
\SystemRoot\System32\drivers\ne2000.sys (Status 0xc0000001)
(./ntoskrnl/io/pnpmgr.c:2170) Initialization of service ne2000 failed
(Status c0000001)
(./ntoskrnl/ldr/loader.c:267) Could not open module file:
\SystemRoot\System32\drivers\pciide.sys (Status 0xc0000001)
(./ntoskrnl/io/pnpmgr.c:2170) Initialization of service pciide failed
(Status c0000001)
(./ntoskrnl/io/driver.c:1295) Driver 'buslogic.sys' load failed,
status (c0000001)
(./ntoskrnl/ldr/loader.c:267) Could not open module file:
\SystemRoot\System32\drivers\pciide.sys (Status 0xc0000034)
(./ntoskrnl/io/pnpmgr.c:2170) Initialization of service pciide failed
(Status c0000034)
(./ntoskrnl/ldr/loader.c:267) Could not open module file:
\SystemRoot\system32\drivers\sndblst.sys (Status 0xc0000034)
(./ntoskrnl/ldr/loader.c:267) Could not open module file:
\SystemRoot\system32\drivers\mpu401.sys (Status 0xc0000034)
(drivers/net/tcpip/tcpip/info.c:36)(InsertTDIInterfaceEntity)
Inserting interface 80aa3ef8 (2 entities already)
(drivers/net/tcpip/tcpip/info.c:36)(InsertTDIInterfaceEntity)
Inserting interface 80ab45f8 (3 entities already)
(drivers/net/tcpip/tcpip/info.c:45)(InsertTDIInterfaceEntity) Entity 2
is an IF.  Found 1
(./ntoskrnl/io/disk.c:630) RDiskCount 2
Entered debugger on last-chance exception number 14 (Page Fault)
Memory at 0x00000000 could not be read: Page not present.
kdb:> bt
Eip:
<7c907b49>
Frames:
kdb:> regs
CS:EIP  0x001b:0x7c907b49
SS:ESP  0x0023:0x0061fd1c
   EAX  0x00000000   EBX  0x00000001
   ECX  0x00000002   EDX  0x00000003
   ESI  0x00000004   EDI  0x00000005
   EBP  0x00000000
EFLAGS  0x00000202  IF IOPL0
kdb:>


On 1/24/06, Thomas Weidenmueller &lt;w3seek(a)reactos.com&gt; wrote:
>   WaxDragon wrote:
> >   I see this error when using the kqemu module. 
> > Are you using kqemu? 
>  A stack trace really would be helpful.
>
>  - Thomas
>  _______________________________________________
>  Ros-dev mailing list
>  Ros-dev(a)reactos.org
>  http://www.reactos.org/mailman/listinfo/ros-dev
>  
WD
--
<Alex_Ionescu> it's like saying let's rename Ke to Kernel because
people think it's Ketchup

[WaxDragon]

Well, I guess I could have been slightly more helpful than that.

I guess 7c907b49 is lib/ntdll/main/i386/dispatch.S:60 (RtlGetVersion)?


>   Memory at 0x00000000 could not be read: Page not
> present.
>  kdb:> bt
>  Eip:
>  <7c907b49>
>  Frames:
>  kdb:> regs
>  CS:EIP  0x001b:0x7c907b49
>  SS:ESP  0x0023:0x0061fd1c
>     EAX  0x00000000   EBX  0x00000001
>     ECX  0x00000002   EDX  0x00000003
>     ESI  0x00000004   EDI  0x00000005
>     EBP  0x00000000
>  EFLAGS  0x00000202  IF IOPL0
>  kdb:>
>  
WD
--
<Alex_Ionescu> it's like saying let's rename Ke to Kernel because
people think it's Ketchup

[James Tabor]

WaxDragon wrote:
>   Well, I guess I could have been slightly more helpful
> than that.
>  
>  I guess 7c907b49 is lib/ntdll/main/i386/dispatch.S:60 (RtlGetVersion)?
>  
>  
>  
> >  Memory at 0x00000000 could not be read: Page not
> > present.
> > kdb:> bt
> > Eip:
> > <7c907b49>
> > Frames:
> > kdb:> regs
> > CS:EIP  0x001b:0x7c907b49
> > SS:ESP  0x0023:0x0061fd1c
> >    EAX  0x00000000   EBX  0x00000001
> >    ECX  0x00000002   EDX  0x00000003
> >    ESI  0x00000004   EDI  0x00000005
> >    EBP  0x00000000
> > EFLAGS  0x00000202  IF IOPL0
> > kdb:>
> >  
>  WD
>  --
>  <Alex_Ionescu> it's like saying let's rename Ke to Kernel because
>  people think it's Ketchup
>   
(./ntoskrnl/ldr/loader.c:267) Could not open module file: \SystemRoot\system32\d
rivers\sndblst.sys (Status 0xc0000034)
(./ntoskrnl/ldr/loader.c:267) Could not open module file: \SystemRoot\system32\d
rivers\mpu401.sys (Status 0xc0000034)
(./ntoskrnl/mm/mm.c:275) Page fault at high IRQL was 2, address 1812c46
Entered debugger on last-chance exception number 14 (Page Fault)
Memory at 0x01812c46 could not be read: Page not present.
kdb:> bt
Eip:
<ntoskrnl.exe:3e91b (./ntoskrnl/mm/npool.c:497 (avl_remove))>
Frames:
<ntoskrnl.exe:3ec06 (./ntoskrnl/mm/npool.c:1141 (remove_from_free_list))>
<ntoskrnl.exe:3f576 (./ntoskrnl/mm/npool.c:1413 (ExAllocateNonPagedPoolWithTag))
>   
<ntoskrnl.exe:413b7 (./ntoskrnl/mm/pool.c:40
(EiAllocatePool))>
<ntoskrnl.exe:414b6 (./ntoskrnl/mm/pool.c:124 (ExAllocatePoolWithTag))>
<i8042prt.sys:24dd (drivers/input/i8042prt/keyboard.c:387 (I8042InternalDeviceCo
ntrolKbd))>
<i8042prt.sys:1779 (w32api/include/ddk/ntdd8042.h:499 (I8042InternalDeviceContro
l))>
<ntoskrnl.exe:220a4 (./ntoskrnl/io/irp.c:1076 (IofCallDriver))>
<kbdclass.sys:15b5 (w32api/include/ddk/ntddkbd.h:475 (ConnectPortDriver))>
<kbdclass.sys:1922 (w32api/include/ddk/ntddkbd.h:706 (ClassAddDevice))>
<ntoskrnl.exe:22bba (./ntoskrnl/io/device.c:91 (IopInitializeDevice))>
<ntoskrnl.exe:2b925 (./ntoskrnl/io/driver.c:2027 (NtLoadDriver))>
<ntoskrnl.exe:65347 (ntoskrnl/ke/i386/trap.s:306 (KiFastCallEntry))>
<ntoskrnl.exe:8b0ed (./ntoskrnl/io/driver.c:1398 (IopLoadDriver))>
<ntoskrnl.exe:24c26 (./ntoskrnl/io/driver.c:1469 (IopInitializeSystemDrivers))>
<ntoskrnl.exe:8c6c5 (./ntoskrnl/io/iomgr.c:434 (IoInit3))>
<ntoskrnl.exe:8a27f (./ntoskrnl/ex/init.c:664 (ExpInitializeExecutive))>
<ntoskrnl.exe:4e75 (./ntoskrnl/ke/main.c:108 (KiSystemStartup))>
<ntoskrnl.exe:8853d (./ntoskrnl/ke/main.c:295 (_main))>
<00000000>
On real hardware. Doesn't happen often, one out of 4 boots.
Thanks,
James

[Reuben Perelman]

Yes, I was using kqemu.

WaxDragon wrote:

>  I see this error when using the kqemu module.  Are you
> using kqemu?
>
> On 1/24/06, Reuben Perelman <reub2000(a)earthlink.net> wrote:
>   
>
> >  I'm getting a KMODE_EXCEPTION_NOT_HANDLED on
> > bootup of ROS 21010 on QEMU.
> >
> > Technical information:
> >
> > ***STOP: 0x0000001E (0xc0000005,0x7c90b49,0x0000000,0x0000000)
> > Page Fault Exception: 14(0)
> > Processor: 0 CS:EIP 1b:7c907b49
> > cr2 0 cr3 567000 Proc: 009a02a0
> > DS 23 ES 23 FS 3v GS -
> > EAX: 00000000   EBX: 0000001   ECX: 0000002
> > EDX: 00000003   EBP: 0000000   ESI: 0000008
> > NTDDK: Pageable code called at IRQL > APC_LEVEL (31)
> > Assertion 'FALSE' failed at ./ntoskrnl/ob/handle.c line 888
> > _______________________________________________
> > Ros-dev mailing list
> > Ros-dev(a)reactos.org
> > http://www.reactos.org/mailman/listinfo/ros-dev
> >
> >     
> >  
>
> --
> <Alex_Ionescu> it's like saying let's rename Ke to Kernel because
> people think it's Ketchup
>
> _______________________________________________
> Ros-dev mailing list
> Ros-dev(a)reactos.org
> http://www.reactos.org/mailman/listinfo/ros-dev
>
>   
>