Re: [ros-dev] FOSDEM 2017 - It's happening!

We use FreeLDR for the RAM booting, which loads in RAM an ISO (not a HDD image yet).<br>
For the LiveCD for example, the following lines can be added into freeldr.ini:<br>
<br>
[Operating Systems]<br>
...<br>
LiveCD_RamDisk="LiveCD in RAM"<br>
...<br>
<br>
[LiveCD_RamDisk]<br>
BootType=Windows2003<br>
SystemPath=ramdisk(0)\reactos<br>
Options=/MININT /RDPATH=livecd\livecd.iso /RDEXPORTASCD<br>
<br>
FreeLdr will load the "livecd\livecd.iso" file from the boot drive (a USB key for example...) (the switch '/RDEXPORTASCD' explicitely specifies that the file is loaded as an ISO image, with read-only access, etc...).<br>
Then, "ramdisk(0)\reactos" specifies that the kernel etc... will be loaded from the "reactos" directory inside the root directory constituted by the ramdisk, once the ramdisk is loaded.<br>
<br>
<br>
Regards,<br>
Hermès

[Zachary Gorden]

Put out a tip jar and label of "beer money."

On Fri, Jan 27, 2017 at 4:28 PM, [e-mail] wrote:
> We use FreeLDR for the RAM booting, which loads in RAM an ISO (not a HDD
> image yet).
> For the LiveCD for example, the following lines can be added into
> freeldr.ini:
>
> [Operating Systems]
> ...
> LiveCD_RamDisk="LiveCD in RAM"
> ...
>
> [LiveCD_RamDisk]
> BootType=Windows2003
> SystemPath=ramdisk(0)\reactos
> Options=/MININT /RDPATH=livecd\livecd.iso /RDEXPORTASCD
>
> FreeLdr will load the "livecd\livecd.iso" file from the boot drive (a USB
> key for example...) (the switch '/RDEXPORTASCD' explicitely specifies that
> the file is loaded as an ISO image, with read-only access, etc...).
> Then, "ramdisk(0)\reactos" specifies that the kernel etc... will be loaded
> from the "reactos" directory inside the root directory constituted by the
> ramdisk, once the ramdisk is loaded.
>
> Regards,
> Hermès
> _______________________________________________
> Ros-dev mailing list
> [e-mail]
> http://www.reactos.org/mailman/listinfo/ros-dev