I run though the first stage installer (formatting the disk) and after
it asks where I want to install freeldr (I choose MBR) ReactOS then
bugchecks:
(cm/ntfunc.c:383) NtCreateKey() doesn't create trees! (found '\' in
remaining path: "\Hardware
Profiles\Current\System\CurrentControlSet\Services\vmx_svga\Device0"!)
(cm/ntfunc.c:383) NtCreateKey() doesn't create trees! (found '\' in
remaining path: "\Hardware
Profiles\Current\System\CurrentControlSet\Services\vmx_svga"!)
(cm/ntfunc.c:383) NtCreateKey() doesn't create trees! (found '\' in
remaining path: "\Hardware
Profiles\Current\System\CurrentControlSet\Services"!)
(cm/ntfunc.c:383) NtCreateKey() doesn't create trees! (found '\' in
remaining path: "\Hardware
Profiles\Current\System\CurrentControlSet"!)
(cm/ntfunc.c:383) NtCreateKey() doesn't create trees! (found '\' in
remaining path: "\Hardware Profiles\Current\System"!)
(cm/ntfunc.c:383) NtCreateKey() doesn't create trees! (found '\' in
remaining path: "\Hardware Profiles\Current"!)
(cm/ntfunc.c:383) NtCreateKey() doesn't create trees! (found '\' in
remaining path: "\VEN_15AD&DEV_0405&SUBSYS_040515AD&REV_00\0000"!)
(bootsup.c:1760) System path: '\Device\Harddisk0\Partition1'
(bootsup.c:1966) No or unknown boot loader found
(bootsup.c:1974) Copy: \Device\CdRom0\loader\freeldr.sys ==>
\Device\Harddisk0\Partition1\freeldr.sys
(bootsup.c:1989) Copy: \Device\CdRom0\loader\freeldr.sys ==>
\Device\Harddisk0\Partition1\freeldr.ini
(inicache.c:1037) BufferSize: 694
(bootsup.c:2003) Save bootsector: \Device\Harddisk0\Partition1 ==>
\Device\Harddisk0\Partition1\bootsect.old
Entered debugger on last-chance exception number 14 (Page Fault)
Memory at 0x138 could not be read: Page not present.
kdb:> bt
Eip:
<vfatfs.sys:b592 (rw.c:572 (VfatRead))>
Frames:
<vfatfs.sys:d1f4 (misc.c:110 (VfatDispatchRequest))>
<vfatfs.sys:d3ee (misc.c:168 (VfatBuildRequest))>
<ntoskrnl.exe:4c898>
<ntoskrnl.exe:4c810>
<ntoskrnl.exe:487bf>
<ntoskrnl.exe:36d2>
<smss.exe:19c3>
<smss.exe:426f>
<smss.exe:16f18>
<smss.exe:17623>
<deadbeef>
kdb:>
Thanks to Alex for showing me how to enable serial output for the bootcd!
WD
--
"<arty> the tree was touched a lot recently"
Show replies by date