Debug Output to Com1

[James Tabor]

Hi!

What happen to the com stuff! 19200 baud! WTH!

(++ÄÅÄ+±_.:101) D+ #__+#+ +Å+: PCI\VEN 1106&DEV B198&SUBSYS 00000000&REV 00\0(NT
DLL:+_/+++_.:2092) R+Ä#+ű000
(++ÄÅÄ+±_.:101) D+ #__+#+ + (770000 -> 750000) C:\R#+OS_<_+Å+: PCI\VEN 1106&DEV
  3205&SUBSYS 32051+32\±32.++
106&REV 00\0000
(NTDLL:+_/+++_.:2092) R+Ä#+ű (7760000 -> 80000) C:\R#+OS_<_++32+__32.++
D_+_B#_ °Ä_ \S<_++RÄÄ+\S<_++32\°_#++°.DLL: 9783000
FIXME: CÄÄ<I+#± Ä_Å'+ _+ÄÄÄ_+ IMAGE ICON Ä__++<!
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å +|M__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å #+|M__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å +|M__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å +M__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å +ÄM__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å +M__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å +ÄM__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å #+|M__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å +|M__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å +M__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å +M__#±
(NTDLL:+_/+++_.:1211) L_G+E|ÄÄ_+B<N#+(): °#+ +Ä °Å +ÄM__#±
(+ÅÄ+_/ÅÄ++.:97)(G+A_<ÅK<S+#+) _ +Å+Ä++Å+, Ä+#_ +_< #±#Å +#+_.
(Å++__/+#__.:114) F#+ +Ä +ÄÄ++Ä +#__ #+Ä+!
H#_ _++ ÄÄ+_.

N+_± == 0|000
(Å++__/ÄÄ+.:504) NÄ+ +Ä++Å+: HÄÄ+I 3 G+Ä#+ TRUE
SHELLHOOK 1
SHELLHOOK 4
SHELLHOOK 1
SHELLHOOK 4
SHELLHOOK 4

[James Tabor]

James Tabor wrote:
> Hi!
>
> What happen to the com stuff! 19200 baud! WTH!

Boot up normal, until after the serial driver loads.

(ldr/loader.c:309) Could not open module file: \SystemRoot\system32\drivers\mpu4
01.sys
DriverBase for \SystemRoot\system32\drivers\null.sys: 9d62e000
DriverBase for \SystemRoot\system32\drivers\serial.sys: 9d646000
(io/device.c:171) IoAttachDeviceToDeviceStackSafe() badly implemented!.ààààààààà
àààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààà

Thanks,
James

[Hervé Poussineau]

Hi!

James Tabor a écrit :
> > What happen to the com stuff! 19200 baud! WTH!
>
> Boot up normal, until after the serial driver loads.
>
> (ldr/loader.c:309) Could not open module file:

\SystemRoot\system32\drivers\mpu401.sys
> DriverBase for \SystemRoot\system32\drivers\null.sys: 9d62e000
> DriverBase for \SystemRoot\system32\drivers\serial.sys: 9d646000
> (io/device.c:171) IoAttachDeviceToDeviceStackSafe() badly
> implemented!.ààààààààààààààààààààààààààààààààààààààààààààààààà
> àààààààààààààààààààààààààààààààààààà

That's strange.
Indeed, serial.sys driver modifies serial port configuration. But it 
sets it to 19200 bauds, 8 data bits, no parity, 1 stop bit, like in 
boot/freeldr/freeldr/comm/rs232.c

Which debug environment are you using? qemu, vmware, real hardware? real 
serial cable or output to some named pipe? which tool are you using to 
get debug output?

IoAttachDeviceToDeviceStackSafe() warning is not very important. It 
should be used instead of IoAttachDeviceToDeviceStack() to prevent a 
race condition, but this race condition actually exists in its code...

Hervé

PS1: old serial driver did absolutely nothing so that's normal that 
reverting to it fixes the problem

PS2: actually, expect conflicts because serial ports are controlled *at 
least* in:
- boot/freeldr/freeldr/comm/rs232.c
- drivers/dd/serial/
- drivers/input/sermouse/
- hal/halx86/generic/kdbg.c