Crash on current CVS

[Steven Edwards]

Hi,

I am kind of stuck at the momement as the current CVS wont boot for me.
My build env does not quite match the recommended spec for Mingw under
Windows so I guess that could be the problem. Is anyone else seeing
this?

(ke/i386/kernel.c:330) CPU supports PAE mode
(ke/i386/kernel.c:341) CPU doesn't run in PAE mode
(ke/i386/kernel.c:346) CPU Vendor: AuthenticAMD
(ke/i386/kernel.c:350) CPU Model:  AMD Athlon(tm) XP 2400+
(ke/i386/kernel.c:353) Ke386CacheAlignment: 64
(ke/i386/kernel.c:356) Ke386L1CacheSize: 128kB
(ke/i386/kernel.c:360) Ke386L2CacheSize: 256kB
(io/pnpmgr.c:962) InstancePath is Root\PCI\0000
(io/pnpmgr.c:962) InstancePath is Root\Ne2000\0000
(io/pnpmgr.c:962) InstancePath is Root\LEGACY_UNKNOWN\0000
(io/pnpmgr.c:962) InstancePath is Root\LEGACY_UNKNOWN\0000
DriverBase for \SystemRoot\system32\drivers\pci.sys: dcc60000
Peripheral Component Interconnect Bus Driver
(io/pnpmgr.c:962) InstancePath is
PCI\VEN_1274&DEV_1371&SUBSYS_13711274&REV_02\0000
(io/pnpmgr.c:962) InstancePath is
PCI\VEN_1022&DEV_2000&SUBSYS_20001022&REV_10\0000
(io/pnpmgr.c:962) InstancePath is
PCI\VEN_104B&DEV_1040&SUBSYS_1040104B&REV_01\0000
(io/pnpmgr.c:962) InstancePath is
PCI\VEN_15AD&DEV_0405&SUBSYS_040515AD&REV_00\0000
(io/pnpmgr.c:962) InstancePath is
PCI\VEN_8086&DEV_7113&SUBSYS_197615AD&REV_08\0000
(io/pnpmgr.c:962) InstancePath is
PCI\VEN_8086&DEV_7111&SUBSYS_197615AD&REV_01\0000
(io/pnpmgr.c:962) InstancePath is
PCI\VEN_8086&DEV_7110&SUBSYS_197615AD&REV_08\0000
(io/pnpmgr.c:962) InstancePath is
PCI\VEN_8086&DEV_7191&SUBSYS_00000000&REV_01\0000
(io/pnpmgr.c:962) InstancePath is
PCI\VEN_8086&DEV_7190&SUBSYS_197615AD&REV_01\0000
DriverBase for scsiport.sys: dcc69000
DriverBase for atapi.sys: dcc74000
(ldr/loader.c:1476) LdrPEGetExportByName(): failed to find
NTOSKRNL.RtlConvertUlongToLargeInteger
(ldr/loader.c:1561) Failed to import
NTOSKRNL.RtlConvertUlongToLargeInteger from scsiport.sys
KeBugCheckWithTf at ke/catch.c:164
Bug detected (code 1e param 0 0 0 0)
  KMODE_EXCEPTION_NOT_HANDLED


Page Fault Exception: 14(0)
Processor: 0 CS:EIP 8:58 
cr2 58 cr3 2a7000 Proc: c0401010 Pid: 1 <SYSTEM> Thrd: c0406050 Tid: 1
DS 10 ES 10 FS 30 GS 10
EAX: 00000058   EBX: ccbd0998   ECX: 00000000
EDX: 00000000   EBP: c00b1c00   ESI: ccbd0998   ESP: c00b1ad0
EDI: 00000f00   EFLAGS: 00210286 kESP c00b1ad0 kernel stack base
c00af000
Frames: <C007FE69>



		
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com

[Thomas Weidenmueller]

Steven Edwards wrote:

>  Hi,
>
> I am kind of stuck at the momement as the current CVS wont boot for me.
> My build env does not quite match the recommended spec for Mingw under
> Windows so I guess that could be the problem. Is anyone else seeing
> this?
>   
>  
Did you upgrade to mingw's gcc/g++ 3.4.2? If so, binutils seems not to 
work correctly with this version. A downgrade to 3.4.1 should fix that 
problem.

Best Regards,
Thomas

[Steven Edwards]

Hi,

--- Thomas Weidenmueller <w3seek(a)reactos.com> wrote:
>   Did you upgrade to mingw's gcc/g++ 3.4.2? If so,
> binutils seems not
>  to 
>  work correctly with this version. A downgrade to 3.4.1 should fix
>  that 
>  problem. 
Its a binutils problem not gcc. Downgrading to the prior binutils
release fixed the issue.

Thanks
Steven



		
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com