17 Dec
2011
17 Dec
'11
3:25 p.m.
After installing boot screen does not show the image
debug.log
(ntoskrnl\kd\kdio.c:172)
---------------------------------------------------------------
(ntoskrnl\kd\kdio.c:173) ReactOS 0.3.13 (Build 20110828-rUNKNOWN)
(ntoskrnl\mm\mminit.c:243) 0x80000000 - 0x81000000 Boot Loaded Image
(ntoskrnl\mm\mminit.c:247) 0xB0000000 - 0xB0900000 PFN Database
(ntoskrnl\mm\mminit.c:251) 0xB0900000 - 0xB38B0000 ARM³ Non Paged Pool
(ntoskrnl\mm\mminit.c:255) 0xBC000000 - 0xBD000000 System View Space
(ntoskrnl\mm\mminit.c:259) 0xBD000000 - 0xC0000000 Session Space
(ntoskrnl\mm\mminit.c:262) 0xC0000000 - 0xC0300000 Page Tables
(ntoskrnl\mm\mminit.c:265) 0xC0300000 - 0xC0400000 Page Directories
(ntoskrnl\mm\mminit.c:268) 0xC0400000 - 0xC0800000 Hyperspace
(ntoskrnl\mm\mminit.c:272) 0xE1000000 - 0xF2400000 ARM³ Paged Pool
(ntoskrnl\mm\mminit.c:275) 0xF2400000 - 0xF7BE0000 System PTE Space
(ntoskrnl\mm\mminit.c:278) 0xF7BE0000 - 0xFFBE0000 Non Paged
Pool Expansion PTE Space
(hal\halx86\generic\legacy\bussupp.c:591) Your machine has a
PCI-to-PCI or CardBUS Bridge. PCI devices may fail!
(hal\halx86\generic\legacy\bussupp.c:620) Found parent bus (indicating
PCI Bridge). PCI devices may fail!
====== PCI BUS HARDWARE DETECTION =======
00:00.0 RAM memory [0500]: MCP78S [GeForce 8200] Memory Con
[10de:0754] (rev a2)
Subsystem: Unknown [1019:2646]
Flags: bus master, 66MHz, latency 0
00:01.0 ISA bridge [0601]: MCP78S [GeForce 8200] LPC Bridge
[10de:075c] (rev a2)
Subsystem: Unknown [1019:2646]
Flags: bus master, 66MHz, latency 0
I/O ports at 2f00 [size=256]
00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus
[10de:0752] (rev a1)
Subsystem: Unknown [1019:2646]
Flags: 66MHz, latency 0, IRQ 10
I/O ports at 2900 [size=256]
I/O ports at 2d00 [size=256]
I/O ports at 2e00 [size=512]
Device is using IRQ 10! ISA Cards using that IRQ may fail!
00:01.2 RAM memory [0500]: MCP78S [GeForce 8200] Memory Con
[10de:0751] (rev a1)
Subsystem: Unknown [1019:2646]
Flags: 66MHz, latency 0
00:01.3 Co-processor [0b40]: MCP78S [GeForce 8200] Co-Process
[10de:0753] (rev a2)
Subsystem: Unknown [1019:2646]
Flags: bus master, 66MHz, latency 0, IRQ 11
Memory at f8e80000 (32-bit, non-prefetchable) [size=512K]
Device is using IRQ 11! ISA Cards using that IRQ may fail!
00:01.4 RAM memory [0500]: MCP78S [GeForce 8200] Memory Con
[10de:0568] (rev a1)
Subsystem: Unknown [1019:2646]
Flags: 66MHz, latency 0
00:02.0 USB Controller [0c03]: MCP78S [GeForce 8200] OHCI USB 1
[10de:077b] (rev a1)
Subsystem: Unknown [1019:2646]
Flags: bus master, 66MHz, latency 0, IRQ 15
Memory at f8e7f000 (32-bit, non-prefetchable) [size=4K]
Device is using IRQ 15! ISA Cards using that IRQ may fail!
Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS!
00:02.1 USB Controller [0c03]: MCP78S [GeForce 8200] EHCI USB 2
[10de:077c] (rev a1)
Subsystem: Unknown [1019:2646]
Flags: bus master, 66MHz, latency 0, IRQ 10
Memory at f8e7ec00 (32-bit, non-prefetchable) [size=1K]
Device is using IRQ 10! ISA Cards using that IRQ may fail!
00:04.0 USB Controller [0c03]: MCP78S [GeForce 8200] OHCI USB 1
[10de:077d] (rev a1)
Subsystem: Unknown [1019:2646]
Flags: bus master, 66MHz, latency 0, IRQ 10
Memory at f8e7d000 (32-bit, non-prefetchable) [size=4K]
Device is using IRQ 10! ISA Cards using that IRQ may fail!
Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS!
00:04.1 USB Controller [0c03]: MCP78S [GeForce 8200] EHCI USB 2
[10de:077e] (rev a1)
Subsystem: Unknown [1019:2646]
Flags: bus master, 66MHz, latency 0, IRQ 11
Memory at f8e7e800 (32-bit, non-prefetchable) [size=2K]
Device is using IRQ 11! ISA Cards using that IRQ may fail!
00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200]
IDE [10de:0759] (rev a1)
Subsystem: Unknown [1019:2646]
Flags: bus master, 66MHz, latency 0
I/O ports at ffa0 [size=32]
00:07.0 Audio device [0403]: MCP72XE/MCP72P/MCP78U/MCP78S Hig
[10de:0774] (rev a1)
Subsystem: Unknown [1019:2646]
Flags: bus master, 66MHz, latency 0, IRQ 15
Memory at f8e78000 (32-bit, non-prefetchable) [size=32K]
Device is using IRQ 15! ISA Cards using that IRQ may fail!
00:08.0 PCI bridge [0604]: MCP78S [GeForce 8200] PCI Bridge
[10de:075a] (rev a1)
Subsystem: GLoria L [0000:0000]
Flags: bus master, 66MHz, latency 0
Memory at 20010100 (32-bit, non-prefetchable) [size=256]
Memory at 228000f0 (32-bit, non-prefetchable) [size=8M]
Memory at 0000fff0 (32-bit, non-prefetchable) [size=256]
Memory at 0000fff0 (32-bit, non-prefetchable) [size=256]
00:09.0 SATA controller [0106]: MCP78S [GeForce 8200] AHCI Contr
[10de:0ad4] (rev a2)
Subsystem: Unknown [1019:2646]
Flags: bus master, 66MHz, latency 0, IRQ 05
I/O ports at b480 [size=128]
I/O ports at b400 [size=1K]
I/O ports at b080 [size=128]
I/O ports at b000 [size=4K]
I/O ports at ac00 [size=1K]
Memory at f8e76000 (32-bit, non-prefetchable) [size=8K]
Device is using IRQ 5! ISA Cards using that IRQ may fail!
00:0b.0 PCI bridge [0604]: MCP78S [GeForce 8200] PCI Expres
[10de:0569] (rev a1)
Subsystem: GLoria L [0000:0000]
Flags: bus master, latency 0
Memory at 00020200 (32-bit, non-prefetchable) [size=512]
I/O ports at 2000c1c0 [size=64]
Memory at f9f0f8f0 (32-bit, non-prefetchable) [size=2K]
I/O ports at cff1c600 [size=512]
00:10.0 PCI bridge [0604]: MCP78S [GeForce 8200] PCI Expres
[10de:0778] (rev a1)
Subsystem: GLoria L [0000:0000]
Flags: bus master, latency 0, IRQ 10
Memory at 00030300 (32-bit, non-prefetchable) [size=256]
I/O ports at 2000d1d0 [size=16]
Memory at fde0fa00 (32-bit, non-prefetchable) [size=512]
I/O ports at dff1d000 [size=4K]
00:12.0 PCI bridge [0604]: MCP78S [GeForce 8200] PCI Expres
[10de:075b] (rev a1)
Subsystem: GLoria L [0000:0000]
Flags: bus master, latency 0, IRQ 11
Memory at 00040400 (32-bit, non-prefetchable) [size=1K]
I/O ports at 01f0 [size=16]
Memory at 0000fff0 (32-bit, non-prefetchable) [size=256]
I/O ports at 1fff0 [size=16]
00:13.0 PCI bridge [0604]: MCP78S [GeForce 8200] PCI Bridge
[10de:077a] (rev a1)
Subsystem: GLoria L [0000:0000]
Flags: bus master, latency 0, IRQ 15
Memory at 00050500 (32-bit, non-prefetchable) [size=256]
I/O ports at 01f0 [size=16]
Memory at 0000fff0 (32-bit, non-prefetchable) [size=256]
I/O ports at 1fff0 [size=16]
00:14.0 PCI bridge [0604]: MCP78S [GeForce 8200] PCI Bridge
[10de:077a] (rev a1)
Subsystem: GLoria L [0000:0000]
Flags: bus master, latency 0, IRQ 07
Memory at 00060600 (32-bit, non-prefetchable) [size=512]
I/O ports at 2000e1e0 [size=32]
Memory at fdf0fdf0 (32-bit, non-prefetchable) [size=256]
I/O ports at f7f1f7f0 [size=16]
00:18.0 Host bridge [0600]: K10 [Opteron, Athlon64, Sempron]
[1022:1200] (rev 00)
Subsystem: GLoria L [0000:0000]
Flags: latency 0
00:18.1 Host bridge [0600]: K10 [Opteron, Athlon64, Sempron]
[1022:1201] (rev 00)
Subsystem: GLoria L [0000:0000]
Flags: latency 0
00:18.2 Host bridge [0600]: K10 [Opteron, Athlon64, Sempron]
[1022:1202] (rev 00)
Subsystem: GLoria L [0000:0000]
Flags: latency 0
00:18.3 Host bridge [0600]: K10 [Opteron, Athlon64, Sempron]
[1022:1203] (rev 00)
Subsystem: GLoria L [0000:0000]
Flags: latency 0
00:18.4 Host bridge [0600]: K10 [Opteron, Athlon64, Sempron]
[1022:1204] (rev 00)
Subsystem: GLoria L [0000:0000]
Flags: latency 0
02:00.0 VGA compatible controller [0300]: nVidia Corporation C77
[GeForce 8200] [10de:0849] (rev a2)
Subsystem: Unknown [1019:2646]
Flags: latency 0, IRQ 10
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Memory at c8000000 (64-bit, prefetchable) [size=128M]
Memory at c6000000 (64-bit, prefetchable) [size=32M]
I/O ports at cc00 [size=1K]
Device is using IRQ 10! ISA Cards using that IRQ may fail!
03:00.0 VGA compatible controller [0300]: nVidia Corporation G92
[GeForce 9800 GT] [10de:0605] (rev a2)
Subsystem: GLoria L [0000:0000]
Flags: bus master, latency 0, IRQ 10
Memory at fc000000 (32-bit, non-prefetchable) [size=64M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at dc00 [size=1K]
Device is using IRQ 10! ISA Cards using that IRQ may fail!
06:00.0 Ethernet controller [0200]: RTL8111/8168B PCI Express Gigabi
[10ec:8168] (rev 02)
Subsystem: Unknown [1019:8111]
Flags: bus master, latency 0, IRQ 07
I/O ports at e800 [size=2K]
Memory at fdfff000 (64-bit, non-prefetchable) [size=4K]
Memory at f7ff0000 (64-bit, prefetchable) [size=64K]
Device is using IRQ 7! ISA Cards using that IRQ may fail!
====== PCI BUS DETECTION COMPLETE =======
PC Compatible Eisa/Isa HAL Detected
(ntoskrnl\io\iomgr\iorsrce.c:882) IoReportResourceUsage is halfplemented!
(ntoskrnl\io\iomgr\iorsrce.c:882) IoReportResourceUsage is halfplemented!
(hal\halx86\generic\legacy\bussupp.c:1149) Slot assignment for 5 on bus 0
(hal\halx86\generic\legacy\bus\pcibus.c:719) WARNING: PCI Slot
Resource Assignment is FOOBAR
(ntoskrnl\io\iomgr\driver.c:1540) '\Driver\BUSLOGIC' initialization
failed, status (0xc00000c0)
(ntoskrnl\io\iomgr\iorsrce.c:725) Failed opening given symbolic link!
(ntoskrnl\mm\ARM3\sysldr.c:168) Loading:
\SystemRoot\System32\DRIVERS\pci.sys at F7A30000 with b pages
(ntoskrnl\io\pnpmgr\pnpmgr.c:183) Warning: PnP Start failed (Root\*PNP0A03\0001)
(ntoskrnl\io\pnpmgr\pnpmgr.c:183) Warning: PnP Start failed (Root\*PNP0A03\0000)
2011/12/17, ros-dev-request(a)reactos.org <ros-dev-request(a)reactos.org>rg>:
Send Ros-dev mailing list submissions to
ros-dev(a)reactos.org
To subscribe or unsubscribe via the World Wide Web, visit
http://www.reactos.org/mailman/listinfo/ros-dev
or, via email, send a message with subject or body 'help' to
ros-dev-request(a)reactos.org
You can reach the person managing the list at
ros-dev-owner(a)reactos.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Ros-dev digest..."
Today's Topics:
1. Apps regressions in 0.3.14 vs. 0.3.13 (Aleksey Bragin)
2. Re: Apps regressions in 0.3.14 vs. 0.3.13 (Igor Paliychuk)
3. Re: Apps regressions in 0.3.14 vs. 0.3.13 (Aleksey Bragin)
4. Re: COM Monitor (caemyr(a)myopera.com)
----------------------------------------------------------------------
Message: 1
Date: Fri, 16 Dec 2011 16:46:07 +0400
From: Aleksey Bragin <aleksey(a)reactos.org>
Subject: [ros-dev] Apps regressions in 0.3.14 vs. 0.3.13
To: ReactOS Development List <ros-dev(a)reactos.org>
Message-ID: <4EEB3D8F.7060405(a)reactos.org>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I did a brief comparison of wiki pages for 0.3.13 and 0.3.14 and found
out at least the following apps which worked in 0.3.13 but does not work
in 0.3.14 RC (aka trunk, we'll set exact revision soon):
AbiWord
Irfanview
Opera 9.64
Python - bug #5767
SMPlayer 0.6.9
VB5 Runtime
I will try to go through the list and see what are the problems.
Everyone is welcome to do the same and distribute the workforce on
fixing those issues.
Certainly, on the positive side, there are "green" fields in the new
test results which were previously "red" in 0.3.13, so user-visible
progress definitely exists, we just need to make sure it's continuously
going better and better, without steps backward.
WBR,
Aleksey Bragin.
------------------------------
Message: 2
Date: Fri, 16 Dec 2011 15:31:41 +0200
From: Igor Paliychuk <mansonigor(a)gmail.com>
Subject: Re: [ros-dev] Apps regressions in 0.3.14 vs. 0.3.13
To: ReactOS Development List <ros-dev(a)reactos.org>
Message-ID:
<CAM0_0mZcLikSyHWJvfDfK3+qKi7OXKsTnJ3gCjtv0pjQNaNScA(a)mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Afaik Infanview needs mfc libs to work so it's not regression, just
app requirement(though i didn't try to run it)
2011/12/16, Aleksey Bragin <aleksey(a)reactos.org>rg>:
I did a brief comparison of wiki pages for 0.3.13
and 0.3.14 and found
out at least the following apps which worked in 0.3.13 but does not work
in 0.3.14 RC (aka trunk, we'll set exact revision soon):
AbiWord
Irfanview
Opera 9.64
Python - bug #5767
SMPlayer 0.6.9
VB5 Runtime
I will try to go through the list and see what are the problems.
Everyone is welcome to do the same and distribute the workforce on
fixing those issues.
Certainly, on the positive side, there are "green" fields in the new
test results which were previously "red" in 0.3.13, so user-visible
progress definitely exists, we just need to make sure it's continuously
going better and better, without steps backward.
WBR,
Aleksey Bragin.
_______________________________________________
Ros-dev mailing list
Ros-dev(a)reactos.org
http://www.reactos.org/mailman/listinfo/ros-dev
------------------------------
Message: 3
Date: Fri, 16 Dec 2011 19:57:38 +0400
From: Aleksey Bragin <aleksey(a)reactos.org>
Subject: Re: [ros-dev] Apps regressions in 0.3.14 vs. 0.3.13
To: ReactOS Development List <ros-dev(a)reactos.org>
Message-ID: <4EEB6A72.50908(a)reactos.org>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Update:
out of this list, only VB5 Runtime remains untested. Everything else is
tested and works except for the newer version of AbiWord (2.9) which is
probably not a regression (and I fixed SxS-related problem this version
of AbiWord was suffering from).
On 16.12.2011 17:31, Igor Paliychuk wrote:
Afaik Infanview needs mfc libs to work so
it's not regression, just
app requirement(though i didn't try to run it)
2011/12/16, Aleksey Bragin<aleksey(a)reactos.org>rg>:
------------------------------
Message: 4
Date: Fri, 16 Dec 2011 23:44:29 +0100
From: caemyr(a)myopera.com
Subject: Re: [ros-dev] COM Monitor
To: "ReactOS Development List" <ros-dev(a)reactos.org>
Message-ID:
<1324075469.24028.140661012646145(a)webmail.messagingengine.com>
Content-Type: text/plain; charset="us-ascii"
Hiya
I think it depends what do you want to do with it. If you want it in ROS
codebase (not necessarily in trunk, but still on svn) you should post a
patch to bugzilla, with some info on how it works.
Best regards
On Fri, Dec 16, 2011, at 01:34 PM, Love Nystrom wrote:
I did a brief comparison of wiki pages for 0.3.13
and 0.3.14 and found
out at least the following apps which worked in 0.3.13 but does not work
in 0.3.14 RC (aka trunk, we'll set exact revision soon):
AbiWord
Irfanview
Opera 9.64
Python - bug #5767
SMPlayer 0.6.9
VB5 Runtime
I will try to go through the list and see what are the problems.
Everyone is welcome to do the same and distribute the workforce on
fixing those issues.
Certainly, on the positive side, there are "green" fields in the new
test results which were previously "red" in 0.3.13, so user-visible
progress definitely exists, we just need to make sure it's continuously
going better and better, without steps backward.
WBR,
Aleksey Bragin.
_______________________________________________
Ros-dev mailing list
Ros-dev(a)reactos.org
http://www.reactos.org/mailman/listinfo/ros-dev
_______________________________________________
Ros-dev mailing list
Ros-dev(a)reactos.org
http://www.reactos.org/mailman/listinfo/ros-dev Hi,
I wrote a test/debug util (COM monitor) for logging ReactOS dbg/bt
messages,
and wonder if it will be better to submit it as a bugzilla patch, or
start a sourceforge
or codeproject page for it ?
Most of you probably have other utils, but ComMon is quite handy with
it's
auto enumerated COM ports, extended selection mode list, copy selected
to clip,
save/clear list etc..
I have it in my reactos/tools tree and it currently builds with the
RosBE toolchain
(standalone w C::B, currently not by rbuild).
Would you be interested at all ?
Best Regards
// Love
_______________________________________________
Ros-dev mailing list
Ros-dev(a)reactos.org
http://www.reactos.org/mailman/listinfo/ros-dev
--
With best regards
Caemyr
------------------------------
_______________________________________________
Ros-dev mailing list
Ros-dev(a)reactos.org
http://www.reactos.org/mailman/listinfo/ros-dev
End of Ros-dev Digest, Vol 88, Issue 13
***************************************
17 Dec
17 Dec
9:03 p.m.
New subject: Ros-dev Digest, Vol 88, Issue 13
I see only AHCI controller as I/O, so i suppose your hdd and CD are both on it or USB.
UNIATA unfortunately doesn't support AHCI yet.
On Sat, Dec 17, 2011, at 01:25 PM, Dimas FranK wrote:
After installing boot screen does not show the image
debug.log
--
With best regards
Caemyr
4717
days inactive
4717
days old
1 comments
2 participants
participants (2)
-
caemyr＠myopera.com -
Dimas FranK