Added: vendor/libjpeg/
Added: vendor/libjpeg/current/
Added: vendor/libjpeg/current/README
Added: vendor/libjpeg/current/ansi2knr.1
Added: vendor/libjpeg/current/ansi2knr.c
Added: vendor/libjpeg/current/cderror.h
Added: vendor/libjpeg/current/cdjpeg.c
Added: vendor/libjpeg/current/cdjpeg.h
Added: vendor/libjpeg/current/change.log
Added: vendor/libjpeg/current/cjpeg.1
Added: vendor/libjpeg/current/cjpeg.c
Added: vendor/libjpeg/current/ckconfig.c
Added: vendor/libjpeg/current/coderules.doc
Added: vendor/libjpeg/current/config.guess
Added: vendor/libjpeg/current/config.sub
Added: vendor/libjpeg/current/configure
Added: vendor/libjpeg/current/djpeg.1
Added: vendor/libjpeg/current/djpeg.c
Added: vendor/libjpeg/current/example.c
Added: vendor/libjpeg/current/filelist.doc
Added: vendor/libjpeg/current/install-sh
Added: vendor/libjpeg/current/install.doc
Added: vendor/libjpeg/current/jcapimin.c
Added: vendor/libjpeg/current/jcapistd.c
Added: vendor/libjpeg/current/jccoefct.c
Added: vendor/libjpeg/current/jccolor.c
Added: vendor/libjpeg/current/jcdctmgr.c
Added: vendor/libjpeg/current/jchuff.c
Added: vendor/libjpeg/current/jchuff.h
Added: vendor/libjpeg/current/jcinit.c
Added: vendor/libjpeg/current/jcmainct.c
Added: vendor/libjpeg/current/jcmarker.c
Added: vendor/libjpeg/current/jcmaster.c
Added: vendor/libjpeg/current/jcomapi.c
Added: vendor/libjpeg/current/jconfig.bcc
Added: vendor/libjpeg/current/jconfig.cfg
Added: vendor/libjpeg/current/jconfig.dj
Added: vendor/libjpeg/current/jconfig.doc
Added: vendor/libjpeg/current/jconfig.mac
Added: vendor/libjpeg/current/jconfig.manx
Added: vendor/libjpeg/current/jconfig.mc6
Added: vendor/libjpeg/current/jconfig.sas
Added: vendor/libjpeg/current/jconfig.st
Added: vendor/libjpeg/current/jconfig.vc
Added: vendor/libjpeg/current/jconfig.vms
Added: vendor/libjpeg/current/jconfig.wat
Added: vendor/libjpeg/current/jcparam.c
Added: vendor/libjpeg/current/jcphuff.c
Added: vendor/libjpeg/current/jcprepct.c
Added: vendor/libjpeg/current/jcsample.c
Added: vendor/libjpeg/current/jctrans.c
Added: vendor/libjpeg/current/jdapimin.c
Added: vendor/libjpeg/current/jdapistd.c
Added: vendor/libjpeg/current/jdatadst.c
Added: vendor/libjpeg/current/jdatasrc.c
Added: vendor/libjpeg/current/jdcoefct.c
Added: vendor/libjpeg/current/jdcolor.c
Added: vendor/libjpeg/current/jdct.h
Added: vendor/libjpeg/current/jddctmgr.c
Added: vendor/libjpeg/current/jdhuff.c
Added: vendor/libjpeg/current/jdhuff.h
Added: vendor/libjpeg/current/jdinput.c
Added: vendor/libjpeg/current/jdmainct.c
Added: vendor/libjpeg/current/jdmarker.c
Added: vendor/libjpeg/current/jdmaster.c
Added: vendor/libjpeg/current/jdmerge.c
Added: vendor/libjpeg/current/jdphuff.c
Added: vendor/libjpeg/current/jdpostct.c
Added: vendor/libjpeg/current/jdsample.c
Added: vendor/libjpeg/current/jdtrans.c
Added: vendor/libjpeg/current/jerror.c
Added: vendor/libjpeg/current/jerror.h
Added: vendor/libjpeg/current/jfdctflt.c
Added: vendor/libjpeg/current/jfdctfst.c
Added: vendor/libjpeg/current/jfdctint.c
Added: vendor/libjpeg/current/jidctflt.c
Added: vendor/libjpeg/current/jidctfst.c
Added: vendor/libjpeg/current/jidctint.c
Added: vendor/libjpeg/current/jidctred.c
Added: vendor/libjpeg/current/jinclude.h
Added: vendor/libjpeg/current/jmemansi.c
Added: vendor/libjpeg/current/jmemdos.c
Added: vendor/libjpeg/current/jmemdosa.asm
Added: vendor/libjpeg/current/jmemmac.c
Added: vendor/libjpeg/current/jmemmgr.c
Added: vendor/libjpeg/current/jmemname.c
Added: vendor/libjpeg/current/jmemnobs.c
Added: vendor/libjpeg/current/jmemsys.h
Added: vendor/libjpeg/current/jmorecfg.h
Added: vendor/libjpeg/current/jpegint.h
Added: vendor/libjpeg/current/jpeglib.h
Added: vendor/libjpeg/current/jpegtran.1
Added: vendor/libjpeg/current/jpegtran.c
Added: vendor/libjpeg/current/jquant1.c
Added: vendor/libjpeg/current/jquant2.c
Added: vendor/libjpeg/current/jutils.c
Added: vendor/libjpeg/current/jversion.h
Added: vendor/libjpeg/current/libjpeg.doc
Added: vendor/libjpeg/current/ltconfig
Added: vendor/libjpeg/current/ltmain.sh
[truncated at 100 lines; 47 more skipped]
--- vendor/libjpeg/current/README 2005-12-30 00:18:48 UTC (rev 20449)
+++ vendor/libjpeg/current/README 2005-12-30 01:00:43 UTC (rev 20450)
@@ -0,0 +1,385 @@
+The Independent JPEG Group's JPEG software
+==========================================
+
+README for release 6b of 27-Mar-1998
+====================================
+
+This distribution contains the sixth public release of the Independent JPEG
+Group's free JPEG software. You are welcome to redistribute this software and
+to use it for any purpose, subject to the conditions under LEGAL ISSUES, below.
+
+Serious users of this software (particularly those incorporating it into
+larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to
+our electronic mailing list. Mailing list members are notified of updates
+and have a chance to participate in technical discussions, etc.
+
+This software is the work of Tom Lane, Philip Gladstone, Jim Boucher,
+Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi,
+Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG
+Group.
+
+IJG is not affiliated with the official ISO JPEG standards committee.
+
+
+DOCUMENTATION ROADMAP
+=====================
+
+This file contains the following sections:
+
+OVERVIEW General description of JPEG and the IJG software.
+LEGAL ISSUES Copyright, lack of warranty, terms of distribution.
+REFERENCES Where to learn more about JPEG.
+ARCHIVE LOCATIONS Where to find newer versions of this software.
+RELATED SOFTWARE Other stuff you should get.
+FILE FORMAT WARS Software *not* to get.
+TO DO Plans for future IJG releases.
+
+Other documentation files in the distribution are:
+
+User documentation:
+ install.doc How to configure and install the IJG software.
+ usage.doc Usage instructions for cjpeg, djpeg, jpegtran,
+ rdjpgcom, and wrjpgcom.
+ *.1 Unix-style man pages for programs (same info as usage.doc).
+ wizard.doc Advanced usage instructions for JPEG wizards only.
+ change.log Version-to-version change highlights.
+Programmer and internal documentation:
+ libjpeg.doc How to use the JPEG library in your own programs.
+ example.c Sample code for calling the JPEG library.
+ structure.doc Overview of the JPEG library's internal structure.
+ filelist.doc Road map of IJG files.
+ coderules.doc Coding style rules --- please read if you contribute code.
+
+Please read at least the files install.doc and usage.doc. Useful information
+can also be found in the JPEG FAQ (Frequently Asked Questions) article. See
+ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
+
+If you want to understand how the JPEG code works, we suggest reading one or
+more of the REFERENCES, then looking at the documentation files (in roughly
+the order listed) before diving into the code.
+
+
+OVERVIEW
+========
+
+This package contains C software to implement JPEG image compression and
+decompression. JPEG (pronounced "jay-peg") is a standardized compression
+method for full-color and gray-scale images. JPEG is intended for compressing
+"real-world" scenes; line drawings, cartoons and other non-realistic images
+are not its strong suit. JPEG is lossy, meaning that the output image is not
+exactly identical to the input image. Hence you must not use JPEG if you
+have to have identical output bits. However, on typical photographic images,
+very good compression levels can be obtained with no visible change, and
+remarkably high compression levels are possible if you can tolerate a
+low-quality image. For more details, see the references, or just experiment
+with various compression settings.
+
+This software implements JPEG baseline, extended-sequential, and progressive
+compression processes. Provision is made for supporting all variants of these
+processes, although some uncommon parameter settings aren't implemented yet.
+For legal reasons, we are not distributing code for the arithmetic-coding
+variants of JPEG; see LEGAL ISSUES. We have made no provision for supporting
+the hierarchical or lossless processes defined in the standard.
+
+We provide a set of library routines for reading and writing JPEG image files,
+plus two sample applications "cjpeg" and "djpeg", which use the library to
+perform conversion between JPEG and some other popular image file formats.
+The library is intended to be reused in other applications.
+
+In order to support file conversion and viewing software, we have included
+considerable functionality beyond the bare JPEG coding/decoding capability;
+for example, the color quantization modules are not strictly part of JPEG
+decoding, but they are essential for output to colormapped file formats or
+colormapped displays. These extra functions can be compiled out of the
+library if not required for a particular application. We have also included
+"jpegtran", a utility for lossless transcoding between different JPEG
+processes, and "rdjpgcom" and "wrjpgcom", two simple applications for
+inserting and extracting textual comments in JFIF files.
+
+The emphasis in designing this software has been on achieving portability and
+flexibility, while also making it fast enough to be useful. In particular,
+the software is not intended to be read as a tutorial on JPEG. (See the
+REFERENCES section for introductory material.) Rather, it is intended to
+be reliable, portable, industrial-strength code. We do not claim to have
+achieved that goal in every aspect of the software, but we strive for it.
+
+We welcome the use of this software as a component of commercial products.
+No royalty is required, but we do ask for an acknowledgement in product
+documentation, as described under LEGAL ISSUES.
+
+
+LEGAL ISSUES
+============
+
+In plain English:
+
+1. We don't promise that this software works. (But if you find any bugs,
+ please let us know!)
+2. You can use this software for whatever you want. You don't have to pay us.
+3. You may not pretend that you wrote this software. If you use it in a
+ program, you must acknowledge somewhere in your documentation that
+ you've used the IJG code.
+
+In legalese:
+
+The authors make NO WARRANTY or representation, either express or implied,
+with respect to this software, its quality, accuracy, merchantability, or
+fitness for a particular purpose. This software is provided "AS IS", and you,
+its user, assume the entire risk as to its quality and accuracy.
+
+This software is copyright (C) 1991-1998, Thomas G. Lane.
+All Rights Reserved except as specified below.
+
+Permission is hereby granted to use, copy, modify, and distribute this
+software (or portions thereof) for any purpose, without fee, subject to these
+conditions:
+(1) If any part of the source code for this software is distributed, then this
+README file must be included, with this copyright and no-warranty notice
+unaltered; and any additions, deletions, or changes to the original files
+must be clearly indicated in accompanying documentation.
+(2) If only executable code is distributed, then the accompanying
+documentation must state that "this software is based in part on the work of
+the Independent JPEG Group".
+(3) Permission for use of this software is granted only if the user accepts
+full responsibility for any undesirable consequences; the authors accept
+NO LIABILITY for damages of any kind.
+
+These conditions apply to any software derived from or based on the IJG code,
+not just to the unmodified library. If you use our work, you ought to
+acknowledge us.
+
+Permission is NOT granted for the use of any IJG author's name or company name
+in advertising or publicity relating to this software or products derived from
+it. This software may be referred to only as "the Independent JPEG Group's
+software".
+
+We specifically permit and encourage the use of this software as the basis of
+commercial products, provided that all warranty or liability claims are
+assumed by the product vendor.
+
+
+ansi2knr.c is included in this distribution by permission of L. Peter Deutsch,
+sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.
+ansi2knr.c is NOT covered by the above copyright and conditions, but instead
+by the usual distribution terms of the Free Software Foundation; principally,
+that you must include source code if you redistribute it. (See the file
+ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part
+of any program generated from the IJG code, this does not limit you more than
+the foregoing paragraphs do.
+
+The Unix configuration script "configure" was produced with GNU Autoconf.
+It is copyright by the Free Software Foundation but is freely distributable.
+The same holds for its supporting scripts (config.guess, config.sub,
+ltconfig, ltmain.sh). Another support script, install-sh, is copyright
+by M.I.T. but is also freely distributable.
+
+It appears that the arithmetic coding option of the JPEG spec is covered by
+patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot
+legally be used without obtaining one or more licenses. For this reason,
+support for arithmetic coding has been removed from the free JPEG software.
+(Since arithmetic coding provides only a marginal gain over the unpatented
+Huffman mode, it is unlikely that very many implementations will support it.)
+So far as we are aware, there are no patent restrictions on the remaining
+code.
+
+The IJG distribution formerly included code to read and write GIF files.
+To avoid entanglement with the Unisys LZW patent, GIF reading support has
+been removed altogether, and the GIF writer has been simplified to produce
+"uncompressed GIFs". This technique does not use the LZW algorithm; the
+resulting GIF files are larger than usual, but are readable by all standard
+GIF decoders.
+
+We are required to state that
+ "The Graphics Interchange Format(c) is the Copyright property of
+ CompuServe Incorporated. GIF(sm) is a Service Mark property of
+ CompuServe Incorporated."
+
+
+REFERENCES
+==========
+
+We highly recommend reading one or more of these references before trying to
+understand the innards of the JPEG software.
+
+The best short technical introduction to the JPEG compression algorithm is
+ Wallace, Gregory K. "The JPEG Still Picture Compression Standard",
+ Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
+(Adjacent articles in that issue discuss MPEG motion picture compression,
+applications of JPEG, and related topics.) If you don't have the CACM issue
+handy, a PostScript file containing a revised version of Wallace's article is
+available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz. The file (actually
+a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
+omits the sample images that appeared in CACM, but it includes corrections
+and some added material. Note: the Wallace article is copyright ACM and IEEE,
+and it may not be used for commercial purposes.
+
+A somewhat less technical, more leisurely introduction to JPEG can be found in
+"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by
+M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides
+good explanations and example C code for a multitude of compression methods
+including JPEG. It is an excellent source if you are comfortable reading C
+code but don't know much about data compression in general. The book's JPEG
+sample code is far from industrial-strength, but when you are ready to look
+at a full implementation, you've got one here...
+
+The best full description of JPEG is the textbook "JPEG Still Image Data
+Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published
+by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. Price US$59.95, 638 pp.
+The book includes the complete text of the ISO JPEG standards (DIS 10918-1
+and draft DIS 10918-2). This is by far the most complete exposition of JPEG
+in existence, and we highly recommend it.
+
+The JPEG standard itself is not available electronically; you must order a
+paper copy through ISO or ITU. (Unless you feel a need to own a certified
+official copy, we recommend buying the Pennebaker and Mitchell book instead;
+it's much cheaper and includes a great deal of useful explanatory material.)
+In the USA, copies of the standard may be ordered from ANSI Sales at (212)
+642-4900, or from Global Engineering Documents at (800) 854-7179. (ANSI
+doesn't take credit card orders, but Global does.) It's not cheap: as of
+1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7%
+shipping/handling. The standard is divided into two parts, Part 1 being the
+actual specification, while Part 2 covers compliance testing methods. Part 1
+is titled "Digital Compression and Coding of Continuous-tone Still Images,
+Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS
+10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of
+Continuous-tone Still Images, Part 2: Compliance testing" and has document
+numbers ISO/IEC IS 10918-2, ITU-T T.83.
+
+Some extensions to the original JPEG standard are defined in JPEG Part 3,
+a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84. IJG
+currently does not support any Part 3 extensions.
+
+The JPEG standard does not specify all details of an interchangeable file
+format. For the omitted details we follow the "JFIF" conventions, revision
+1.02. A copy of the JFIF spec is available from:
+ Literature Department
+ C-Cube Microsystems, Inc.
+ 1778 McCarthy Blvd.
+ Milpitas, CA 95035
+ phone (408) 944-6300, fax (408) 944-6314
+A PostScript version of this document is available by FTP at
+ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz. There is also a plain text
+version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is missing
+the figures.
+
+The TIFF 6.0 file format specification can be obtained by FTP from
+ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme
+found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems.
+IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6).
+Instead, we recommend the JPEG design proposed by TIFF Technical Note #2
+(Compression tag 7). Copies of this Note can be obtained from ftp.sgi.com or
+from ftp://ftp.uu.net/graphics/jpeg/. It is expected that the next revision
+of the TIFF spec will replace the 6.0 JPEG design with the Note's design.
+Although IJG's own code does not support TIFF/JPEG, the free libtiff library
+uses our library to implement TIFF/JPEG per the Note. libtiff is available
+from ftp://ftp.sgi.com/graphics/tiff/.
+
+
+ARCHIVE LOCATIONS
+=================
+
+The "official" archive site for this software is ftp.uu.net (Internet
+address 192.48.96.9). The most recent released version can always be found
+there in directory graphics/jpeg. This particular version will be archived
+as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz. If you don't have
+direct Internet access, UUNET's archives are also available via UUCP; contact
+help@uunet.uu.net for information on retrieving files that way.
+
+Numerous Internet sites maintain copies of the UUNET files. However, only
+ftp.uu.net is guaranteed to have the latest official version.
+
+You can also obtain this software in DOS-compatible "zip" archive format from
+the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or
+on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12
+"JPEG Tools". Again, these versions may sometimes lag behind the ftp.uu.net
+release.
+
+The JPEG FAQ (Frequently Asked Questions) article is a useful source of
+general information about JPEG. It is updated constantly and therefore is
+not included in this distribution. The FAQ is posted every two weeks to
+Usenet newsgroups comp.graphics.misc, news.answers, and other groups.
+It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/
+and other news.answers archive sites, including the official news.answers
+archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/.
+If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu
+with body
+ send usenet/news.answers/jpeg-faq/part1
+ send usenet/news.answers/jpeg-faq/part2
+
+
+RELATED SOFTWARE
+================
+
+Numerous viewing and image manipulation programs now support JPEG. (Quite a
+few of them use this library to do so.) The JPEG FAQ described above lists
+some of the more popular free and shareware viewers, and tells where to
+obtain them on Internet.
+
+If you are on a Unix machine, we highly recommend Jef Poskanzer's free
+PBMPLUS software, which provides many useful operations on PPM-format image
+files. In particular, it can convert PPM images to and from a wide range of
+other formats, thus making cjpeg/djpeg considerably more useful. The latest
+version is distributed by the NetPBM group, and is available from numerous
+sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/.
+Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is;
+you are likely to have difficulty making it work on any non-Unix machine.
+
+A different free JPEG implementation, written by the PVRG group at Stanford,
+is available from ftp://havefun.stanford.edu/pub/jpeg/. This program
+is designed for research and experimentation rather than production use;
+it is slower, harder to use, and less portable than the IJG code, but it
+is easier to read and modify. Also, the PVRG code supports lossless JPEG,
+which we do not. (On the other hand, it doesn't do progressive JPEG.)
+
+
+FILE FORMAT WARS
+================
+
+Some JPEG programs produce files that are not compatible with our library.
+The root of the problem is that the ISO JPEG committee failed to specify a
+concrete file format. Some vendors "filled in the blanks" on their own,
+creating proprietary formats that no one else could read. (For example, none
+of the early commercial JPEG implementations for the Macintosh were able to
+exchange compressed files.)
+
+The file format we have adopted is called JFIF (see REFERENCES). This format
+has been agreed to by a number of major commercial JPEG vendors, and it has
+become the de facto standard. JFIF is a minimal or "low end" representation.
+We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF
+Technical Note #2) for "high end" applications that need to record a lot of
+additional data about an image. TIFF/JPEG is fairly new and not yet widely
+supported, unfortunately.
+
+The upcoming JPEG Part 3 standard defines a file format called SPIFF.
+SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should
+be able to read the most common variant of SPIFF. SPIFF has some technical
+advantages over JFIF, but its major claim to fame is simply that it is an
+official standard rather than an informal one. At this point it is unclear
+whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto
+standard. IJG intends to support SPIFF once the standard is frozen, but we
+have not decided whether it should become our default output format or not.
+(In any case, our decoder will remain capable of reading JFIF indefinitely.)
+
+Various proprietary file formats incorporating JPEG compression also exist.
+We have little or no sympathy for the existence of these formats. Indeed,
+one of the original reasons for developing this free software was to help
+force convergence on common, open format standards for JPEG files. Don't
+use a proprietary file format!
+
+
+TO DO
+=====
+
+The major thrust for v7 will probably be improvement of visual quality.
+The current method for scaling the quantization tables is known not to be
+very good at low Q values. We also intend to investigate block boundary
+smoothing, "poor man's variable quantization", and other means of improving
+quality-vs-file-size performance without sacrificing compatibility.
+
+In future versions, we are considering supporting some of the upcoming JPEG
+Part 3 extensions --- principally, variable quantization and the SPIFF file
+format.
+
+As always, speeding things up is of great interest.
+
+Please send bug reports, offers of help, etc. to jpeg-info@uunet.uu.net.
--- vendor/libjpeg/current/ansi2knr.1 2005-12-30 00:18:48 UTC (rev 20449)
+++ vendor/libjpeg/current/ansi2knr.1 2005-12-30 01:00:43 UTC (rev 20450)
@@ -0,0 +1,36 @@
+.TH ANSI2KNR 1 "19 Jan 1996"
+.SH NAME
+ansi2knr \- convert ANSI C to Kernighan & Ritchie C
+.SH SYNOPSIS
+.I ansi2knr
+[--varargs] input_file [output_file]
+.SH DESCRIPTION
+If no output_file is supplied, output goes to stdout.
+.br
+There are no error messages.
+.sp
+.I ansi2knr
+recognizes function definitions by seeing a non-keyword identifier at the left
+margin, followed by a left parenthesis, with a right parenthesis as the last
+character on the line, and with a left brace as the first token on the
+following line (ignoring possible intervening comments). It will recognize a
+multi-line header provided that no intervening line ends with a left or right
+brace or a semicolon. These algorithms ignore whitespace and comments, except
+that the function name must be the first thing on the line.
+.sp
+The following constructs will confuse it:
+.br
+ - Any other construct that starts at the left margin and follows the
+above syntax (such as a macro or function call).
+.br
+ - Some macros that tinker with the syntax of the function header.
+.sp
+The --varargs switch is obsolete, and is recognized only for
+backwards compatibility. The present version of
+.I ansi2knr
+will always attempt to convert a ... argument to va_alist and va_dcl.
+.SH AUTHOR
+L. Peter Deutsch <ghost@aladdin.com> wrote the original ansi2knr and
+continues to maintain the current version; most of the code in the current
+version is his work. ansi2knr also includes contributions by Francois
+Pinard <pinard@iro.umontreal.ca> and Jim Avera <jima@netcom.com>.
--- vendor/libjpeg/current/ansi2knr.c 2005-12-30 00:18:48 UTC (rev 20449)
+++ vendor/libjpeg/current/ansi2knr.c 2005-12-30 01:00:43 UTC (rev 20450)
@@ -0,0 +1,693 @@
+/* ansi2knr.c */
+/* Convert ANSI C function definitions to K&R ("traditional C") syntax */
+
+/*
+ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY. No author or distributor accepts responsibility to anyone for the
+consequences of using it or for whether it serves any particular purpose or
+works at all, unless he says so in writing. Refer to the GNU General Public
+License (the "GPL") for full details.
+
+Everyone is granted permission to copy, modify and redistribute ansi2knr,
+but only under the conditions described in the GPL. A copy of this license
+is supposed to have been given to you along with ansi2knr so you can know
+your rights and responsibilities. It should be in a file named COPYLEFT.
+[In the IJG distribution, the GPL appears below, not in a separate file.]
+Among other things, the copyright notice and this notice must be preserved
+on all copies.
+
+We explicitly state here what we believe is already implied by the GPL: if
+the ansi2knr program is distributed as a separate set of sources and a
+separate executable file which are aggregated on a storage medium together
+with another program, this in itself does not bring the other program under
+the GPL, nor does the mere fact that such a program or the procedures for
+constructing it invoke the ansi2knr executable bring any other part of the
+program under the GPL.
+*/
+
+/*
+---------- Here is the GNU GPL file COPYLEFT, referred to above ----------
+----- These terms do NOT apply to the JPEG software itself; see README ------
+
+ GHOSTSCRIPT GENERAL PUBLIC LICENSE
+ (Clarified 11 Feb 1988)
+
+ Copyright (C) 1988 Richard M. Stallman
+ Everyone is permitted to copy and distribute verbatim copies of this
+ license, but changing it is not allowed. You can also use this wording
+ to make the terms for other programs.
+
+ The license agreements of most software companies keep you at the
+mercy of those companies. By contrast, our general public license is
+intended to give everyone the right to share Ghostscript. To make sure
+that you get the rights we want you to have, we need to make
+restrictions that forbid anyone to deny you these rights or to ask you
+to surrender the rights. Hence this license agreement.
+
+ Specifically, we want to make sure that you have the right to give
+away copies of Ghostscript, that you receive source code or else can get
+it if you want it, that you can change Ghostscript or use pieces of it
+in new free programs, and that you know you can do these things.
+
+ To make sure that everyone has such rights, we have to forbid you to
+deprive anyone else of these rights. For example, if you distribute
+copies of Ghostscript, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must tell them their rights.
+
+ Also, for our own protection, we must make certain that everyone finds
+out that there is no warranty for Ghostscript. If Ghostscript is
+modified by someone else and passed on, we want its recipients to know
+that what they have is not what we distributed, so that any problems
+introduced by others will not reflect on our reputation.
+
+ Therefore we (Richard M. Stallman and the Free Software Foundation,
+Inc.) make the following terms which say what you must do to be allowed
+to distribute or change Ghostscript.
+
+
+ COPYING POLICIES
+
+ 1. You may copy and distribute verbatim copies of Ghostscript source
+code as you receive it, in any medium, provided that you conspicuously
+and appropriately publish on each copy a valid copyright and license
+notice "Copyright (C) 1989 Aladdin Enterprises. All rights reserved.
+Distributed by Free Software Foundation, Inc." (or with whatever year is
+appropriate); keep intact the notices on all files that refer to this
+License Agreement and to the absence of any warranty; and give any other
+recipients of the Ghostscript program a copy of this License Agreement
+along with the program. You may charge a distribution fee for the
+physical act of transferring a copy.
+
+ 2. You may modify your copy or copies of Ghostscript or any portion of
+it, and copy and distribute such modifications under the terms of
+Paragraph 1 above, provided that you also do the following:
+
+ a) cause the modified files to carry prominent notices stating
+ that you changed the files and the date of any change; and
+
+ b) cause the whole of any work that you distribute or publish,
+ that in whole or in part contains or is a derivative of Ghostscript
+ or any part thereof, to be licensed at no charge to all third
+ parties on terms identical to those contained in this License
+ Agreement (except that you may choose to grant more extensive
+ warranty protection to some or all third parties, at your option).
+
+ c) You may charge a distribution fee for the physical act of
+ transferring a copy, and you may at your option offer warranty
+ protection in exchange for a fee.
+
+Mere aggregation of another unrelated program with this program (or its
+derivative) on a volume of a storage or distribution medium does not bring
+the other program under the scope of these terms.
+
+ 3. You may copy and distribute Ghostscript (or a portion or derivative
+of it, under Paragraph 2) in object code or executable form under the
+terms of Paragraphs 1 and 2 above provided that you also do one of the
+following:
+
+ a) accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ b) accompany it with a written offer, valid for at least three
+ years, to give any third party free (except for a nominal
+ shipping charge) a complete machine-readable copy of the
+ corresponding source code, to be distributed under the terms of
+ Paragraphs 1 and 2 above; or,
+
+ c) accompany it with the information you received as to where the
+ corresponding source code may be obtained. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form alone.)
+
+For an executable file, complete source code means all the source code for
+all modules it contains; but, as a special exception, it need not include
+source code for modules which are standard libraries that accompany the
+operating system on which the executable file runs.
+
+ 4. You may not copy, sublicense, distribute or transfer Ghostscript
+except as expressly provided under this License Agreement. Any attempt
+otherwise to copy, sublicense, distribute or transfer Ghostscript is
+void and your rights to use the program under this License agreement
+shall be automatically terminated. However, parties who have received
+computer software programs from you with this License Agreement will not
+have their licenses terminated so long as such parties remain in full
+compliance.
+
+ 5. If you wish to incorporate parts of Ghostscript into other free
+programs whose distribution conditions are different, write to the Free
+Software Foundation at 675 Mass Ave, Cambridge, MA 02139. We have not
+yet worked out a simple rule that can be stated here, but we will often
+permit this. We will be guided by the two goals of preserving the free
+status of all derivatives of our free software and of promoting the
+sharing and reuse of software.
+
+Your comments and suggestions about our licensing policies and our
+software are welcome! Please contact the Free Software Foundation,
+Inc., 675 Mass Ave, Cambridge, MA 02139, or call (617) 876-3296.
+
+ NO WARRANTY
+
+ BECAUSE GHOSTSCRIPT IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY
+NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW. EXCEPT
+WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC, RICHARD
+M. STALLMAN, ALADDIN ENTERPRISES, L. PETER DEUTSCH, AND/OR OTHER PARTIES
+PROVIDE GHOSTSCRIPT "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
+EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
+ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF GHOSTSCRIPT IS WITH
+YOU. SHOULD GHOSTSCRIPT PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
+NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M.
+STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., L. PETER DEUTSCH, ALADDIN
+ENTERPRISES, AND/OR ANY OTHER PARTY WHO MAY MODIFY AND REDISTRIBUTE
+GHOSTSCRIPT AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
+ANY LOST PROFITS, LOST MONIES, OR OTHER SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
+(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
+INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR A FAILURE OF THE
+PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) GHOSTSCRIPT, EVEN IF YOU
+HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM
+BY ANY OTHER PARTY.
+
+-------------------- End of file COPYLEFT ------------------------------
+*/
+
+/*
+ * Usage:
+ ansi2knr input_file [output_file]
+ * If no output_file is supplied, output goes to stdout.
+ * There are no error messages.
+ *
+ * ansi2knr recognizes function definitions by seeing a non-keyword
+ * identifier at the left margin, followed by a left parenthesis,
+ * with a right parenthesis as the last character on the line,
+ * and with a left brace as the first token on the following line
+ * (ignoring possible intervening comments).
+ * It will recognize a multi-line header provided that no intervening
+ * line ends with a left or right brace or a semicolon.
+ * These algorithms ignore whitespace and comments, except that
+ * the function name must be the first thing on the line.
+ * The following constructs will confuse it:
+ * - Any other construct that starts at the left margin and
+ * follows the above syntax (such as a macro or function call).
+ * - Some macros that tinker with the syntax of the function header.
+ */
+
+/*
+ * The original and principal author of ansi2knr is L. Peter Deutsch
+ * <ghost@aladdin.com>. Other authors are noted in the change history
+ * that follows (in reverse chronological order):
+ lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with
+ compilers that don't understand void, as suggested by
+ Tom Lane
+ lpd 96-01-15 changed to require that the first non-comment token
+ on the line following a function header be a left brace,
+ to reduce sensitivity to macros, as suggested by Tom Lane
+ <tgl@sss.pgh.pa.us>
+ lpd 95-06-22 removed #ifndefs whose sole purpose was to define
+ undefined preprocessor symbols as 0; changed all #ifdefs
+ for configuration symbols to #ifs
+ lpd 95-04-05 changed copyright notice to make it clear that
+ including ansi2knr in a program does not bring the entire
+ program under the GPL
+ lpd 94-12-18 added conditionals for systems where ctype macros
+ don't handle 8-bit characters properly, suggested by
+ Francois Pinard <pinard@iro.umontreal.ca>;
+ removed --varargs switch (this is now the default)
+ lpd 94-10-10 removed CONFIG_BROKETS conditional
+ lpd 94-07-16 added some conditionals to help GNU `configure',
+ suggested by Francois Pinard <pinard@iro.umontreal.ca>;
+ properly erase prototype args in function parameters,
+ contributed by Jim Avera <jima@netcom.com>;
+ correct error in writeblanks (it shouldn't erase EOLs)
+ lpd 89-xx-xx original version
+ */
+
+/* Most of the conditionals here are to make ansi2knr work with */
+/* or without the GNU configure machinery. */
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdio.h>
+#include <ctype.h>
+
+#if HAVE_CONFIG_H
+
+/*
+ For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h).
+ This will define HAVE_CONFIG_H and so, activate the following lines.
+ */
+
+# if STDC_HEADERS || HAVE_STRING_H
+# include <string.h>
+# else
+# include <strings.h>
+# endif
+
+#else /* not HAVE_CONFIG_H */
+
+/* Otherwise do it the hard way */
+
+# ifdef BSD
+# include <strings.h>
+# else
+# ifdef VMS
+ extern int strlen(), strncmp();
+# else
+# include <string.h>
+# endif
+# endif
+
+#endif /* not HAVE_CONFIG_H */
+
+#if STDC_HEADERS
+# include <stdlib.h>
+#else
+/*
+ malloc and free should be declared in stdlib.h,
+ but if you've got a K&R compiler, they probably aren't.
+ */
+# ifdef MSDOS
+# include <malloc.h>
+# else
+# ifdef VMS
+ extern char *malloc();
+ extern void free();
+# else
+ extern char *malloc();
+ extern int free();
+# endif
+# endif
+
+#endif
+
+/*
+ * The ctype macros don't always handle 8-bit characters correctly.
+ * Compensate for this here.
+ */
+#ifdef isascii
+# undef HAVE_ISASCII /* just in case */
+# define HAVE_ISASCII 1
+#else
+#endif
+#if STDC_HEADERS || !HAVE_ISASCII
+# define is_ascii(c) 1
+#else
+# define is_ascii(c) isascii(c)
+#endif
+
+#define is_space(c) (is_ascii(c) && isspace(c))
+#define is_alpha(c) (is_ascii(c) && isalpha(c))
+#define is_alnum(c) (is_ascii(c) && isalnum(c))
+
+/* Scanning macros */
+#define isidchar(ch) (is_alnum(ch) || (ch) == '_')
+#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
+
+/* Forward references */
+char *skipspace();
+int writeblanks();
+int test1();
+int convert1();
+
+/* The main program */
+int
+main(argc, argv)
+ int argc;
+ char *argv[];
+{ FILE *in, *out;
+#define bufsize 5000 /* arbitrary size */
+ char *buf;
+ char *line;
+ char *more;
+ /*
+ * In previous versions, ansi2knr recognized a --varargs switch.
+ * If this switch was supplied, ansi2knr would attempt to convert
+ * a ... argument to va_alist and va_dcl; if this switch was not
+ * supplied, ansi2knr would simply drop any such arguments.
+ * Now, ansi2knr always does this conversion, and we only
+ * check for this switch for backward compatibility.
+ */
+ int convert_varargs = 1;
+
+ if ( argc > 1 && argv[1][0] == '-' )
+ { if ( !strcmp(argv[1], "--varargs") )
+ { convert_varargs = 1;
+ argc--;
+ argv++;
+ }
+ else
+ { fprintf(stderr, "Unrecognized switch: %s\n", argv[1]);
+ exit(1);
+ }
+ }
+ switch ( argc )
+ {
+ default:
+ printf("Usage: ansi2knr input_file [output_file]\n");
+ exit(0);
+ case 2:
+ out = stdout;
+ break;
+ case 3:
+ out = fopen(argv[2], "w");
+ if ( out == NULL )
+ { fprintf(stderr, "Cannot open output file %s\n", argv[2]);
+ exit(1);
+ }
+ }
+ in = fopen(argv[1], "r");
+ if ( in == NULL )
+ { fprintf(stderr, "Cannot open input file %s\n", argv[1]);
+ exit(1);
+ }
+ fprintf(out, "#line 1 \"%s\"\n", argv[1]);
+ buf = malloc(bufsize);
+ line = buf;
+ while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
+ {
+test: line += strlen(line);
+ switch ( test1(buf) )
+ {
+ case 2: /* a function header */
+ convert1(buf, out, 1, convert_varargs);
+ break;
+ case 1: /* a function */
+ /* Check for a { at the start of the next line. */
+ more = ++line;
+f: if ( line >= buf + (bufsize - 1) ) /* overflow check */
+ goto wl;
+ if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
+ goto wl;
+ switch ( *skipspace(more, 1) )
+ {
+ case '{':
+ /* Definitely a function header. */
+ convert1(buf, out, 0, convert_varargs);
+ fputs(more, out);
+ break;
+ case 0:
+ /* The next line was blank or a comment: */
+ /* keep scanning for a non-comment. */
+ line += strlen(line);
+ goto f;
+ default:
+ /* buf isn't a function header, but */
+ /* more might be. */
+ fputs(buf, out);
+ strcpy(buf, more);
+ line = buf;
+ goto test;
+ }
+ break;
+ case -1: /* maybe the start of a function */
+ if ( line != buf + (bufsize - 1) ) /* overflow check */
+ continue;
+ /* falls through */
+ default: /* not a function */
+wl: fputs(buf, out);
+ break;
+ }
+ line = buf;
+ }
+ if ( line != buf )
+ fputs(buf, out);
+ free(buf);
+ fclose(out);
+ fclose(in);
+ return 0;
+}
+
+/* Skip over space and comments, in either direction. */
+char *
+skipspace(p, dir)
+ register char *p;
+ register int dir; /* 1 for forward, -1 for backward */
+{ for ( ; ; )
+ { while ( is_space(*p) )
+ p += dir;
+ if ( !(*p == '/' && p[dir] == '*') )
+ break;
+ p += dir; p += dir;
+ while ( !(*p == '*' && p[dir] == '/') )
+ { if ( *p == 0 )
+ return p; /* multi-line comment?? */
+ p += dir;
+ }
+ p += dir; p += dir;
+ }
+ return p;
+}
+
+/*
+ * Write blanks over part of a string.
+ * Don't overwrite end-of-line characters.
+ */
+int
+writeblanks(start, end)
+ char *start;
+ char *end;
+{ char *p;
+ for ( p = start; p < end; p++ )
+ if ( *p != '\r' && *p != '\n' )
+ *p = ' ';
+ return 0;
+}
+
+/*
+ * Test whether the string in buf is a function definition.
+ * The string may contain and/or end with a newline.
+ * Return as follows:
+ * 0 - definitely not a function definition;
+ * 1 - definitely a function definition;
+ * 2 - definitely a function prototype (NOT USED);
+ * -1 - may be the beginning of a function definition,
+ * append another line and look again.
+ * The reason we don't attempt to convert function prototypes is that
+ * Ghostscript's declaration-generating macros look too much like
+ * prototypes, and confuse the algorithms.
+ */
+int
+test1(buf)
+ char *buf;
+{ register char *p = buf;
+ char *bend;
+ char *endfn;
+ int contin;
+
+ if ( !isidfirstchar(*p) )
+ return 0; /* no name at left margin */
+ bend = skipspace(buf + strlen(buf) - 1, -1);
+ switch ( *bend )
+ {
+ case ';': contin = 0 /*2*/; break;
+ case ')': contin = 1; break;
+ case '{': return 0; /* not a function */
+ case '}': return 0; /* not a function */
+ default: contin = -1;
+ }
+ while ( isidchar(*p) )
+ p++;
+ endfn = p;
+ p = skipspace(p, 1);
+ if ( *p++ != '(' )
+ return 0; /* not a function */
+ p = skipspace(p, 1);
+ if ( *p == ')' )
+ return 0; /* no parameters */
+ /* Check that the apparent function name isn't a keyword. */
+ /* We only need to check for keywords that could be followed */
+ /* by a left parenthesis (which, unfortunately, is most of them). */
+ { static char *words[] =
+ { "asm", "auto", "case", "char", "const", "double",
+ "extern", "float", "for", "if", "int", "long",
+ "register", "return", "short", "signed", "sizeof",
+ "static", "switch", "typedef", "unsigned",
+ "void", "volatile", "while", 0
+ };
+ char **key = words;
+ char *kp;
+ int len = endfn - buf;
+
+ while ( (kp = *key) != 0 )
+ { if ( strlen(kp) == len && !strncmp(kp, buf, len) )
+ return 0; /* name is a keyword */
+ key++;
+ }
+ }
+ return contin;
+}
+
+/* Convert a recognized function definition or header to K&R syntax. */
+int
+convert1(buf, out, header, convert_varargs)
+ char *buf;
+ FILE *out;
+ int header; /* Boolean */
+ int convert_varargs; /* Boolean */
+{ char *endfn;
+ register char *p;
+ char **breaks;
+ unsigned num_breaks = 2; /* for testing */
+ char **btop;
+ char **bp;
+ char **ap;
+ char *vararg = 0;
+
+ /* Pre-ANSI implementations don't agree on whether strchr */
+ /* is called strchr or index, so we open-code it here. */
+ for ( endfn = buf; *(endfn++) != '('; )
+ ;
+top: p = endfn;
+ breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
+ if ( breaks == 0 )
+ { /* Couldn't allocate break table, give up */
+ fprintf(stderr, "Unable to allocate break table!\n");
+ fputs(buf, out);
+ return -1;
+ }
+ btop = breaks + num_breaks * 2 - 2;
+ bp = breaks;
+ /* Parse the argument list */
+ do
+ { int level = 0;
+ char *lp = NULL;
+ char *rp;
+ char *end = NULL;
+
+ if ( bp >= btop )
+ { /* Filled up break table. */
[truncated at 1000 lines; 57126 more skipped]