Ros-dev

ros-dev@reactos.org

1 participants
5793 discussions

Re: [ros-dev] A New RosBE made by me
by Aleksey 20 Apr '07

20 Apr '07

> OT: > Did we decide to place RosBE in our svn? Did the question ever come up? > Thanks, > James Do you mean the src code of the RosBE? It should already be there. As for binaries - as always we put them to sf.net. WBR, Aleksey.

1 0

Re: [ros-dev] Boot Rev 26382
by Aleksey 19 Apr '07

19 Apr '07

I will finally move those cromwell usb drivers somewhere so they won't be installed even by "make install" :-) WBR, Aleksey Bragin. ----- Original Message ----- From: "James Tabor" <jimtabor(a)adsl-64-217-116-74.dsl.hstntx.swbell.net> To: "ReactOS Development List" <ros-dev(a)reactos.org> Sent: Wednesday, April 18, 2007 10:47 PM Subject: Re: [ros-dev] Boot Rev 26382 > Hi! > I did get it to boot by removing the usb drivers. > 8^D > James

2 1

Re: [ros-dev] Ros-dev Digest, Vol 32, Issue 12
by Lucio Diaz 19 Apr '07

19 Apr '07

Aleksey Bragin wrote: --------------------------- That shows you really did not even slightly investigated how the website works. And instead you're proposing a whole workflow for developers, so they mandatory spent a few hours per week maintaining all the stuff you. During that 2 years you should have spent just a bit of time, even 20 minutes, to overview our website and systems we have there, and another 20 minutes to read online manuals/help for them. Excuses like "I didn't have time" hardly apply here. ------------------------- -Irony on- I suppouse that copying each individual resource file, every time it is updated, dont waste developers time.-Irony off- It is your operating system, your servers and your time, you can do as you please. It is not my intention to propose a whole workflow to developers, i only sugested an idea for an easy to use translation tool, noone have to waste time, something similar to the compilation environments, and the IDEs, but some people prefer making things by hand in the command line, but again, is your os and your time, i will decide what to do with my time and if i can or i want to use bugzilla. I feel molested by your tone, i have spent more time on reactos than what you could imagine, but thats not the matter, i think this is a good project, with a great goal, i believe that the easier for everybody to get involved, the best for the project, and my sugestion was going in that direction. I have read the ML for years, and almost never posted a word, i dont have the skill to help much, but offer what "i can", you can take it or not. Regards, Lucio Diaz. ____________________________________________________________________________________ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com

2 1

Tr : [Qemu-devel] Re: QEMU drivers repository
by Sylvain Petreolle 19 Apr '07

19 Apr '07

May these VESA drivers be useful for ros testing ? ----- Message transféré ---- De : Jan Jezabek <jezabek(a)poczta.onet.pl> À : qemu-devel(a)nongnu.org Envoyé le : Mercredi, 18 Avril 2007, 21h25mn 40s Objet : [Qemu-devel] Re: QEMU drivers repository Natalia Portillo wrote: > Hi all, > I have collected all drivers I could for GD-5446 in > http://www.claunia.com/qemu/drivers/index.html > Hi, If you're interested in NT 3.51 you can find a graphics driver here: http://www.navozhdeniye.narod.ru/vbemp.htm It's a generic VESA driver, but it was the only one I could find that supported high resolution true-color display in NT 3.51, so maybe it's worth to put a link on your page. As for network - I had a good experience with the Realtek 8029 drivers: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFi… WBR, JJ

2 1

Re: [ros-dev] DbgPrint() - DPRINT() - DPRINT1()
by Aleksey 19 Apr '07

19 Apr '07

Hi Peter, it's a good idea to post an explanation here (might be someone will edit this into a page in our wiki). 1. Traditional DPRINT debug printing ("old way"): All source code files have an #define NDEBUG atop of them, a developer could get a detailed tracing of function calls inside this src code file. DPRINT1()s are used when that code branch must always notify a user / developer (examples are: critical error, not fully implemented branch with a reminder to finish implementation, and any other kind of a situation which occurs rarely and may have a severe impact on a system). 2. "Wine-way" of debug print messages. The printing is done using three macros: TRACE(), WARN(), ERR(). Respectively, TRACE() is the most frequently printed, WARN() is less frequently, and ERR() is an equivalent of a DPRINT1() - always printed, in error situations. In order to enable TRACE() and WARN() debug prints, one must add a #define YDEBUG to the respective place inside an interesting source code file. (Wine has a concept of debug channels, which can be turned on and off, however ReactOS for now does not implement this). 3. Other ways exist, specific for drivers / applications (e.g. for miniport / port / class drivers, client drivers usually use their class's driver's debug print routine, a custom one, having custom severities levels). 4. Newer ways of debug printing (kernel-specific, look for debug channels in windows 2003, debug printing in Vista, -- OSR magazine had a nice article about these). WBR, Aleksey Bragin. ----- Original Message ----- From: <breakoutbox(a)web.de> To: <Ros-dev(a)reactos.org> Sent: Thursday, April 19, 2007 4:21 PM Subject: [ros-dev] DbgPrint() - DPRINT() - DPRINT1() > Hello, > > can please anybody explain me how You want DbgPrint() - DPRINT() - > DPRINT1() to be used ? > I found a lot of DPRINT() _for_example_ in "win32/in32k/objects/dc.c" but > it is not shown on serial debug (?) > (and also SOME ot these DPRINT1() .. ) > > 1) > If I use DPRINT1() instead, it is always shown. > If I use DbgPrint() instead, it is only shown when #DEBUG is defined in > the file + in *.rbuild > But what's the sense of DPRINT() then ? > => > > 2) > 2nd stage: on installing from BootCD I can see serial debug only when I > select DEBUG from startup options. > Is this DPRINT1() suppressed when I DON'T select DEBUG ? > > 3) > Why is there not one DbgPrint() in "win32/in32k/objects/dc.c" (and also in > other files in /DRIVER/ and /NTOSKRNL/ ..) ? > I now have to change every serial debug output to be able to see anything > .. ( if You don't explain me ... ;-) ) > > > Best regards, > Peter.

1 0

DbgPrint() - DPRINT() - DPRINT1()
by breakoutbox＠web.de 19 Apr '07

19 Apr '07

Hello, can please anybody explain me how You want DbgPrint() - DPRINT() - DPRINT1() to be used ? I found a lot of DPRINT() _for_example_ in "win32/in32k/objects/dc.c" but it is not shown on serial debug (?) (and also SOME ot these DPRINT1() .. ) 1) If I use DPRINT1() instead, it is always shown. If I use DbgPrint() instead, it is only shown when #DEBUG is defined in the file + in *.rbuild But what's the sense of DPRINT() then ? => 2) 2nd stage: on installing from BootCD I can see serial debug only when I select DEBUG from startup options. Is this DPRINT1() suppressed when I DON'T select DEBUG ? 3) Why is there not one DbgPrint() in "win32/in32k/objects/dc.c" (and also in other files in /DRIVER/ and /NTOSKRNL/ ..) ? I now have to change every serial debug output to be able to see anything .. ( if You don't explain me ... ;-) ) Best regards, Peter. _______________________________________________________________ SMS schreiben mit WEB.DE FreeMail - einfach, schnell und kostenguenstig. Jetzt gleich testen! http://f.web.de/?mc=021192

1 0

Re: [ros-dev] Ros-dev Digest, Vol 32, Issue 12
by Aleksey 19 Apr '07

19 Apr '07

----- Original Message ----- From: "Lucio Diaz" <reactos_translate(a)yahoo.es> To: <ros-dev(a)reactos.org> Sent: Wednesday, April 18, 2007 11:08 PM Subject: Re: [ros-dev] Ros-dev Digest, Vol 32, Issue 12 > -Irony on- I suppouse that copying each individual > resource file, every time it is updated, dont waste > developers time.-Irony off- I don't want to disappoint you even more, but there is a whole concept of a so-called patches (or diffs), which are the thing to be placed in bugzilla, not whole files. I suggest some investigation in this area, like http://en.wikipedia.org/wiki/Patch_%28Unix%29 (it's automated on win32 using TortoiseSVN for example, in GUI mode, etc). And in general about version control systems, bug tracking systems, changesets, and other related terms. WBR, Aleksey Bragin.

1 0

Boot Rev 26382
by James Tabor 18 Apr '07

18 Apr '07

Hi! FYI: Real hardware boot log, (ntoskrnl\kd\kdio.c:193) ----------------------------------------------------- (ntoskrnl\kd\kdio.c:194) ReactOS 0.4-SVN (Build 20070417-r26382) (ntoskrnl\kd\kdio.c:195) Command Line: DEBUGPORT=COM1 (ntoskrnl\kd\kdio.c:199) ARC Paths: multi(0)disk(0)rdisk(0)partition(1) \ multi(0)disk(0)rdisk(0)partition(1) \ReactOS\ (ntoskrnl\ke\i386\cpu.c:518) Not handling AMD caches yet Used memory 1015744Kb (ntoskrnl\se\semgr.c:36) FIXME: SeAccessCheck has been HACKED to always grant access! (ntoskrnl\se\semgr.c:37) FIXME: Please fix all the code that doesn't get properrights! (ntoskrnl\ke\i386\kiinit.c:43) Large Page support detected but not yet taken advantage of! WARNING: HaliQuerySystemInformation at hal\halx86\generic\sysinfo.c:26 is UNIMPLEMENTED! (ntoskrnl\ke\i386\patpge.c:62) Advanced Memory features detected but not yet taken advantage of. (ntoskrnl\ke\i386\mtrr.c:24) Your machine supports MTRR but ReactOS doesn't yet. 0 bytes requested - initiating pool verification 0 bytes requested - initiating pool verification (ntoskrnl\io\iomgr\iorsrce.c:701) IoReportResourceUsage is unimplemented (ntoskrnl\io\iomgr\iorsrce.c:701) IoReportResourceUsage is unimplemented (ntoskrnl\io\iomgr\driver.c:798) Driver 'BUSLOGIC.SYS' load failed, status (c00000c0) (ntoskrnl\io\iomgr\file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1 MmPageEntireDriver at ntoskrnl\mm\drvlck.c:87 is unimplemented, have a nice day MmPageEntireDriver at ntoskrnl\mm\drvlck.c:87 is unimplemented, have a nice day MmPageEntireDriver at ntoskrnl\mm\drvlck.c:87 is unimplemented, have a nice day (ntoskrnl\io\iomgr\file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 10001 (ntoskrnl\io\iomgr\file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1 (ntoskrnl\vdm\vdmmain.c:42) VME detected but not yet supported (lib\rtl\registry.c:362) RTL: Expand variables for %SystemRoot%\system32\cmd.exe failed - Status == c0000023 Size a8 > 7e <e> (lib\rtl\registry.c:362) RTL: Expand variables for %SystemRoot%\bin;%SystemRoot%\system32;%SystemRoot% failed - Status == c0000023 Size f4 > ac <14> (lib\fslib\vfatlib\vfatlib.c:215) VfatChkdsk() unimplemented! (lib\rtl\registry.c:362) RTL: Expand variables for %SystemRoot%\system32 failed - Status == c0000023 Size a4 > 7e <6> (ntoskrnl\io\iomgr\file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1f01ff (ntoskrnl\io\iomgr\file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1f01ff (ntoskrnl\io\iomgr\file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1f01ff (ntoskrnl\se\semgr.c:1161) FIX caller rights (granted 0x8, desired 0x28, generic mapping 80C049E0)! (dll\win32\iphlpapi\ifenum_reactos.c:99) openTcpFile for <\Device\Tcp> failed: 0xc0000034 (dll\win32\iphlpapi\ifenum_reactos.c:99) openTcpFile for <\Device\Tcp> failed: 0xc0000034 (ntoskrnl\io\iomgr\file.c:410) FIXME: Broken Parse due to invalid DesiredAccess: 1f01ff (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find mxdMessage (dll\ntdll\ldr\utils.c:2025) Failed to create or open dll section of 'msacm.drv' (Status c0000135) (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find auxMessage (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find mxdMessage (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find midMessage (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find widMessage (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find wodMessage (dll\win32\shell32\shellpath.c:1688) Failed to create directory 'L".\\Local Settings\\Temporary Internet Files"'. (dll\win32\shell32\shellpath.c:1688) Failed to create directory 'L".\\Local Settings\\History"'. (dll\win32\shell32\shellpath.c:1688) Failed to create directory 'L".\\Cookies"'. (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find mxdMessage (dll\ntdll\ldr\utils.c:2025) Failed to create or open dll section of 'msacm.drv' (Status c0000135) (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find auxMessage (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find mxdMessage (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find midMessage (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find widMessage (dll\ntdll\ldr\utils.c:1199) LdrGetExportByName(): failed to find wodMessage (dll\win32\newdev\newdev.c:680) SetupDiOpenDeviceInfoW() failed with error 0xe000020b (InstanceId HTREE\ROOT\0) (dll\win32\newdev\newdev.c:736) Installing PCI BIOS (Root\*PNP0A03\0000) (dll\win32\newdev\newdev.c:525) Installing driver (Generic system devices): PCIbus (dll\win32\setupapi\queue.c:1521) copy error 2 L"C:\\ReactOS\\inf\\pci.sys" -> L"C:\\ReactOS\\System32\\drivers\\pci.sys" (dll\win32\rpcrt4\ndr_marshall.c:928) unhandled data type=09 (drivers\bus\pci\fdo.c:535) Unknown IOCTL 0xd (drivers\bus\pci\fdo.c:373) No bus number resource found (bug in acpi.sys?), assuming bus number #0 (0,8D7D0178,36) (dll\win32\newdev\newdev.c:736) Installing <NULL> (Root\*PNP0F13\0000) (dll\win32\newdev\newdev.c:525) Installing driver (Standard mice): PS/2 port for PS/2-style mice (dll\win32\setupapi\queue.c:1521) copy error 2 L"C:\\ReactOS\\inf\\i8042prt.sys" -> L"C:\\ReactOS\\System32\\drivers\\i8042prt.sys" (dll\win32\setupapi\queue.c:1521) copy error 2 L"C:\\ReactOS\\inf\\mouclass.sys" -> L"C:\\ReactOS\\System32\\drivers\\mouclass.sys" (dll\win32\rpcrt4\ndr_marshall.c:928) unhandled data type=09 (dll\win32\newdev\newdev.c:736) Installing <NULL> (Root\*PNP0303\0000) (dll\win32\newdev\newdev.c:525) Installing driver (Standard keyboards): IBM PC/AT keyboard (dll\win32\setupapi\queue.c:1521) copy error 2 L"C:\\ReactOS\\inf\\i8042prt.sys" -> L"C:\\ReactOS\\System32\\drivers\\i8042prt.sys" (dll\win32\setupapi\queue.c:1521) copy error 2 L"C:\\ReactOS\\inf\\kbdclass.sys" -> L"C:\\ReactOS\\System32\\drivers\\kbdclass.sys" (dll\win32\rpcrt4\ndr_marshall.c:928) unhandled data type=09 (dll\win32\newdev\newdev.c:736) Installing COM1 (Root\*PNP0501\0000) (dll\win32\newdev\newdev.c:525) Installing driver (Standard ports): Serial communication port (dll\win32\setupapi\queue.c:1521) copy error 2 L"C:\\ReactOS\\inf\\serial.sys" -> L"C:\\ReactOS\\System32\\drivers\\serial.sys" (dll\win32\setupapi\queue.c:1521) copy error 2 L"C:\\ReactOS\\inf\\serenum.sys" -> L"C:\\ReactOS\\System32\\drivers\\serenum.sys" (dll\win32\rpcrt4\ndr_marshall.c:928) unhandled data type=09 (dll\win32\rpcrt4\ndr_marshall.c:928) unhandled data type=09 (drivers\serial\serenum\fdo.c:209) IRP_MJ_PNP / unknown minor function 0xd (drivers\serial\serial\pnp.c:400) Unknown minor function 0xd (drivers\serial\serial\pnp.c:221) KdComPort: D11025FF=üà <two lines of junk> Comm dies, it does continue to boot with a BSOD with the usb driver. Thanks, James

1 1

Automatic testing suite
by Aleksey 18 Apr '07

18 Apr '07

Hi, could someone please remind me what is the state of the automatic reactos testing suite? WBR, Aleksey Bragin.

3 2

Re: [ros-dev] [ros-diffs] [tkreuzer] 26396: NtGdiGetObject: - return 0 if buffer != 0 and count == 0 - don't write beyond umode buffer size (max count bytes!) - use SEH only once - No need for Ret & RetCount, use only RetCount - document the function
by Ged 18 Apr '07

18 Apr '07

> + * @remarks > + * The function will always return the complete size of the object's > data, > + * but will copy only a maximum of count bytes to the specified buffer. This isn't necessarily true, and the function is slightly flawed because of it. It's a rather weird API in terms of it's results. Your rewrite doesn't take into account the following cases, according to XP: ................................................................ BITMAP behaviour GetObjectW(hBmp, -1, &bmp) returns 24 and fills the struct GetObjectW(hBmp, 0, &bmp) returns 0 and doesn't fill the struct GetObjectW(hBmp, 1, &bmp) returns 0 and doesn't fill the struct GetObjectW(hBmp, sizeof(BITMAP), &bmp) returns 24 and fills the struct GetObjectW(hBmp, 5000, &bmp) returns 24 and fills the struct DIBSECTION behaviour GetObjectW(hBmp, -1, &dib) returns 24 and fills the struct GetObjectW(hBmp, 0, &dib) returns 0 and doesn't fill the struct GetObjectW(hBmp, 1, &dib) returns 0 and doesn't fill the struct GetObjectW(hBmp, sizeof(BITMAP), &dib) returns 24 and fills the struct GetObjectW(hBmp, sizeof(DIBSECTION), &dib) returns 24 and fills the struct GetObjectW(hBmp, 5000, &dib) returns 24 and fills the struct Non struct behaviour The function will always return 24, no matter what size is passed. ................................................................ So, we can conclude that if size is less than 0, it works. If size if between 0 and 23, it doesn't, and anything above works. If we pass NULL, as the struct, we return 24, but obviously don't fill the struct. I would have grabbed you on IRC, but you weren't around ;) Ged. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. Amteus PLC 57 Cardigan Lane, Leeds, LS4 2LE t:+44 (0) 870 8368770 f: +44 (0) 870 8368701 Registered in England No 4760795 http://www.amteus.com

2 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Ros-dev