Import VMware open source BusLogic driver
Hartmut made it work in ReactOS.
Modified: trunk/reactos/boot/freeldr/freeldr/reactos/setupldr.c
Modified: trunk/reactos/bootdata/hivesys.inf
Modified: trunk/reactos/bootdata/txtsetup.sif
Added: trunk/reactos/drivers/storage/buslogic/
Modified: trunk/reactos/drivers/storage/buslogic/BusLogic958.c
Modified: trunk/reactos/drivers/storage/buslogic/BusLogic958.h
Added: trunk/reactos/drivers/storage/buslogic/README.ReactOS
Added: trunk/reactos/drivers/storage/buslogic/buslogic.xml
Deleted: trunk/reactos/drivers/storage/buslogic/makefile
Added: trunk/reactos/drivers/storage/buslogic/makefile.original
Modified: trunk/reactos/drivers/storage/directory.xml
_____
Modified: trunk/reactos/boot/freeldr/freeldr/reactos/setupldr.c
--- trunk/reactos/boot/freeldr/freeldr/reactos/setupldr.c
2005-08-18 21:37:18 UTC (rev 17433)
+++ trunk/reactos/boot/freeldr/freeldr/reactos/setupldr.c
2005-08-18 21:59:20 UTC (rev 17434)
@@ -611,6 +611,10 @@
if (!LoadDriver(SourcePath, "atapi.sys"))
return;
+ /* Load buslogic.sys (depends on hardware detection) */
+ if (!LoadDriver(SourcePath, "buslogic.sys"))
+ return;
+
/* Load class2.sys */
if (!LoadDriver(SourcePath, "class2.sys"))
return;
_____
Modified: trunk/reactos/bootdata/hivesys.inf
--- trunk/reactos/bootdata/hivesys.inf 2005-08-18 21:37:18 UTC (rev
17433)
+++ trunk/reactos/bootdata/hivesys.inf 2005-08-18 21:59:20 UTC (rev
17434)
@@ -376,6 +376,14 @@
HKLM,"SYSTEM\CurrentControlSet\Services\Atapi","Type",0x00010001,0x00000
001
HKLM,"SYSTEM\CurrentControlSet\Services\Atapi","Tag",0x00010001,0x000000
10
+; BusLogic 958 miniport driver
+HKLM,"SYSTEM\CurrentControlSet\Services\BusLogic","ErrorControl",0x0001
0001,0x00000000
+HKLM,"SYSTEM\CurrentControlSet\Services\BusLogic","Group",0x00000000,"S
CSI Miniport"
+HKLM,"SYSTEM\CurrentControlSet\Services\BusLogic","ImagePath",0x0002000
0,"system32\drivers\buslogic.sys"
+HKLM,"SYSTEM\CurrentControlSet\Services\BusLogic","Start",0x00010001,0x
00000000
+HKLM,"SYSTEM\CurrentControlSet\Services\BusLogic","Type",0x00010001,0x0
0000001
+HKLM,"SYSTEM\CurrentControlSet\Services\BusLogic","Tag",0x00010001,0x00
000020
+
; ACPI driver
HKLM,"SYSTEM\CurrentControlSet\Services\ACPI","ErrorControl",0x00010001,
0x00000001
HKLM,"SYSTEM\CurrentControlSet\Services\ACPI","Group",0x00000000,"Boot
Bus Extender"
_____
Modified: trunk/reactos/bootdata/txtsetup.sif
--- trunk/reactos/bootdata/txtsetup.sif 2005-08-18 21:37:18 UTC (rev
17433)
+++ trunk/reactos/bootdata/txtsetup.sif 2005-08-18 21:59:20 UTC (rev
17434)
@@ -14,6 +14,7 @@
[SourceFiles]
; <filename> = <directory_id>
atapi.sys = 3
+buslogic.sys = 3
blue.sys = 3
c_437.nls = 2
c_1252.nls = 2
_____
Copied: trunk/reactos/drivers/storage/buslogic (from rev 17433,
vendor/VMware/buslogic/current)
Property changes on: trunk/reactos/drivers/storage/buslogic
___________________________________________________________________
Name: svn:ignore + makefile
_____
Modified: trunk/reactos/drivers/storage/buslogic/BusLogic958.c
--- vendor/VMware/buslogic/current/BusLogic958.c 2005-08-18
21:37:18 UTC (rev 17433)
+++ trunk/reactos/drivers/storage/buslogic/BusLogic958.c
2005-08-18 21:59:20 UTC (rev 17434)
@@ -70,6 +70,7 @@
#include "BusLogic958.h"
ULONG
+STDCALL
DriverEntry(IN PVOID DriverObject,
IN PVOID Argument2
)
@@ -86,16 +87,16 @@
ULONG Status;
ULONG i;
ULONG HwContext;
- static int cardNo = 0;
+// static int cardNo = 0;
UCHAR VendorId[4] = { '1', '0', '4', 'b' };
UCHAR DeviceId[4] = { '1', '0', '4', '0' };
- DebugPrint((0,"\n BusLogic - Inside the DriverEntry function
\n"));
+ DebugPrint((0,"\n BusLogic - Inside the DriverEntry function
\n"));
// Zero out structure.
for (i = 0; i < sizeof(HW_INITIALIZATION_DATA); i++)
- {
+ {
((PUCHAR) & hwInitializationData)[i] = 0;
}
@@ -104,18 +105,18 @@
// Set entry points.
hwInitializationData.HwInitialize = BT958HwInitialize;
- hwInitializationData.HwResetBus = BT958HwResetBus;
+ hwInitializationData.HwResetBus = BT958HwResetBus;
hwInitializationData.HwStartIo = BT958HwStartIO;
hwInitializationData.HwInterrupt = BT958HwInterrupt;
hwInitializationData.HwAdapterControl = BT958HwAdapterControl;
- hwInitializationData.HwFindAdapter = BT958HwFindAdapter;
+ hwInitializationData.HwFindAdapter = BT958HwFindAdapter;
- // Inidicate no buffer mapping but will need physical addresses
+ // Inidicate no buffer mapping but will need physical addresses
hwInitializationData.NeedPhysicalAddresses = TRUE;
- // Indicate Auto request sense is supported
- hwInitializationData.AutoRequestSense = TRUE;
- hwInitializationData.MultipleRequestPerLu = TRUE;
+ // Indicate Auto request sense is supported
+ hwInitializationData.AutoRequestSense = TRUE;
+ hwInitializationData.MultipleRequestPerLu = TRUE;
#if TAG_QUEUING
hwInitializationData.TaggedQueuing = TRUE;
@@ -125,7 +126,7 @@
hwInitializationData.AdapterInterfaceType = PCIBus;
- // Fill in the vendor id and the device id
+ // Fill in the vendor id and the device id
hwInitializationData.VendorId = &VendorId;
hwInitializationData.VendorIdLength = 4;
hwInitializationData.DeviceId = &DeviceId;
@@ -135,36 +136,36 @@
hwInitializationData.NumberOfAccessRanges = 2;
- // Specify size of extensions.
+ // Specify size of extensions.
hwInitializationData.DeviceExtensionSize =
sizeof(HW_DEVICE_EXTENSION);
- // logical unit extension
+ // logical unit extension
hwInitializationData.SrbExtensionSize = sizeof(BusLogic_CCB_T);
HwContext = 0;
- DebugPrint((0,"\n BusLogic - Calling the ScsiPortInitialize
Routine\n"));
+ DebugPrint((0,"\n BusLogic - Calling the ScsiPortInitialize
Routine\n"));
Status = ScsiPortInitialize(DriverObject,
Argument2,
&hwInitializationData,
&HwContext);
- DebugPrint((0,"\n BusLogic - Exiting the DriverEntry function
\n"));
- DebugPrint((0,"\n BusLogic - Status = %ul \n", Status));
+ DebugPrint((0,"\n BusLogic - Exiting the DriverEntry function
\n"));
+ DebugPrint((0,"\n BusLogic - Status = %ul \n", Status));
return( Status );
} // end DriverEntry()
ULONG
+STDCALL
BT958HwFindAdapter(IN PVOID HwDeviceExtension,
- IN PVOID Context,
- IN PVOID BusInformation,
- IN PCHAR ArgumentString,
- IN OUT
PPORT_CONFIGURATION_INFORMATION ConfigInfo,
- OUT PBOOLEAN Again
- )
+ IN PVOID Context,
+ IN PVOID BusInformation,
+ IN PCHAR ArgumentString,
+ IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo,
+ OUT PBOOLEAN Again)
//______________________________________________________________________
___________________________
// Routine Description:
// This function is called by the OS-specific port driver
after the necessary storage
@@ -192,61 +193,61 @@
{
PHW_DEVICE_EXTENSION deviceExtension = HwDeviceExtension;
BusLogic_HostAdapter_T *hcsp = &(deviceExtension->hcs);
- static UCHAR k = 0;
+// static UCHAR k = 0;
PACCESS_RANGE accessRange;
- PCI_COMMON_CONFIG PCICommonConfig;
+// PCI_COMMON_CONFIG PCICommonConfig;
PUCHAR pciAddress, portFound;
char NumPort = 0;
- DebugPrint((0,"\n BusLogic - Inside the Find Adapter
Routine\n"));
+ DebugPrint((0,"\n BusLogic - Inside the Find Adapter Routine\n"));
*Again = FALSE;
- accessRange = &((*(ConfigInfo->AccessRanges))[0]);
+ accessRange = &((*(ConfigInfo->AccessRanges))[0]);
// Inform SCSIPORT that we are NOT a WMI data provider
// Sirish, 10th June 2002
ConfigInfo->WmiDataProvider = FALSE;
/*Sirish, 10th June 2002 BT958WmiInitialize(deviceExtension);*/
- // Check for configuration information passed in form the system
- if ((*ConfigInfo->AccessRanges)[0].RangeLength != 0)
+ // Check for configuration information passed in form the system
+ if ((*ConfigInfo->AccessRanges)[0].RangeLength != 0)
+ {
+ // check if the system supplied bus-relative address is valid
and has not been
+ // claimed by anyother device
+ if ( ScsiPortValidateRange(deviceExtension,
+ ConfigInfo->AdapterInterfaceType,
+ ConfigInfo->SystemIoBusNumber,
+ accessRange->RangeStart,
+ accessRange->RangeLength,
+ TRUE) ) // TRUE: iniospace
{
- // check if the system supplied bus-relative address is
valid and has not been
- // claimed by anyother device
- if ( ScsiPortValidateRange(deviceExtension,
-
ConfigInfo->AdapterInterfaceType,
-
ConfigInfo->SystemIoBusNumber,
-
accessRange->RangeStart,
-
accessRange->RangeLength,
- TRUE) ) //
TRUE: iniospace
- {
- DebugPrint((0,"\n BusLogic - BusLogic -
Validate Range function suceeded \n"));
+ DebugPrint((0,"\n BusLogic - BusLogic - Validate Range
function suceeded \n"));
- // Map the Bus-relative range addresses to
system-space logical range addresses
- // so that these mapped logical addresses can be
called with SciPortRead/Writexxx
- // to determine whether the adapter is an HBA
that the driver supports
+ // Map the Bus-relative range addresses to system-space
logical range addresses
+ // so that these mapped logical addresses can be called with
SciPortRead/Writexxx
+ // to determine whether the adapter is an HBA that the
driver supports
- pciAddress = (PUCHAR)
ScsiPortGetDeviceBase(deviceExtension,
-
ConfigInfo->AdapterInterfaceType,
-
ConfigInfo->SystemIoBusNumber,
-
accessRange->RangeStart,
-
accessRange->RangeLength,
-
TRUE); // TRUE: iniospace
+ pciAddress = (PUCHAR) ScsiPortGetDeviceBase(deviceExtension,
+
ConfigInfo->AdapterInterfaceType,
+
ConfigInfo->SystemIoBusNumber,
+
accessRange->RangeStart,
+
accessRange->RangeLength,
+ TRUE); //
TRUE: iniospace
- if(pciAddress)
- {
- DebugPrint((0,"\n BusLogic - Get Device
Base function suceeded \n"));
+ if(pciAddress)
+ {
+ DebugPrint((0,"\n BusLogic - Get Device Base function
suceeded \n"));
- memset(hcsp, 0,
sizeof(BusLogic_HostAdapter_T));
+ memset(hcsp, 0, sizeof(BusLogic_HostAdapter_T));
- // points to structure of type BT958_HA
which has device specific information. This needs
- // to be either changed or modified with
our specific info.
- hcsp->IO_Address = pciAddress;
- hcsp->IRQ_Channel =
(UCHAR)ConfigInfo->BusInterruptLevel;
- NumPort++;
- }
- }
+ // points to structure of type BT958_HA which has device
specific information. This needs
+ // to be either changed or modified with our specific
info.
+ hcsp->IO_Address = pciAddress;
+ hcsp->IRQ_Channel =
(UCHAR)ConfigInfo->BusInterruptLevel;
+ NumPort++;
+ }
+ }
}
if (NumPort == 0)
@@ -534,8 +535,7 @@
if (StatusRegister.Bits.DataInRegisterReady)
{
- UCHAR ErrorCode =
BusLogic_ReadDataInRegister(HostAdapter);
- DebugPrint((0,"HOST ADAPTER ERROR CODE = %d\n",
ErrorCode));
+ DebugPrint((0,"HOST ADAPTER ERROR CODE = %d\n",
BusLogic_ReadDataInRegister(HostAdapter)));
}
return FALSE;
}
@@ -834,7 +834,7 @@
BusLogic_GeometryRegister_T GeometryRegister;
BusLogic_RequestedReplyLength_T RequestedReplyLength;
UCHAR *TargetPointer, Character;
- int TargetID, i;
+ ULONG /*TargetID,*/ i;
// Issue the Inquire Board ID command.
@@ -948,7 +948,7 @@
*TargetPointer = '\0';
// Issue the Inquire Firmware Version Letter command.
- if (strcmp(HostAdapter->FirmwareVersion, "3.3") >= 0)
+ if (strcmp((char*)HostAdapter->FirmwareVersion, "3.3") >= 0)
{
if (BusLogic_Command(HostAdapter,
BusLogic_InquireFirmwareVersionLetter,
@@ -1110,7 +1110,7 @@
HostAdapter->HostAdapterQueueDepth = 192;
}
- if (strcmp(HostAdapter->FirmwareVersion, "3.31") >= 0)
+ if (strcmp((char*)HostAdapter->FirmwareVersion, "3.31") >= 0)
{
HostAdapter->StrictRoundRobinModeSupport = TRUE;
HostAdapter->MailboxCount = BusLogic_MaxMailboxes;
@@ -1134,8 +1134,8 @@
//
// Initialize the Host Adapter Full Model Name from the Model Name.
- strcpy(HostAdapter->FullModelName, "BusLogic ");
- strcat(HostAdapter->FullModelName, HostAdapter->ModelName);
+ strcpy((char*)HostAdapter->FullModelName, "BusLogic ");
+ strcat((char*)HostAdapter->FullModelName,
(char*)HostAdapter->ModelName);
// Tagged Queuing is only allowed if Disconnect/Reconnect is
permitted.
// Therefore, mask the Tagged Queuing Permitted Default bits with
the
@@ -1304,7 +1304,7 @@
//______________________________________________________________________
___
{
BusLogic_InstalledDevices_T InstalledDevices;
- BusLogic_InstalledDevices8_T InstalledDevicesID0to7;
+// BusLogic_InstalledDevices8_T InstalledDevicesID0to7;
BusLogic_SetupInformation_T SetupInformation;
BusLogic_SynchronousPeriod_T SynchronousPeriod;
BusLogic_RequestedReplyLength_T RequestedReplyLength;
@@ -1323,7 +1323,7 @@
// Period commands will return valid data. The Inquire Target
Devices command
// is preferable to Inquire Installed Devices ID 0 to 7 since it
only probes
// Logical Unit 0 of each Target Device.
- if (strcmp(HostAdapter->FirmwareVersion, "4.25") >= 0)
+ if (strcmp((char*)HostAdapter->FirmwareVersion, "4.25") >= 0)
{
if (BusLogic_Command(HostAdapter,
BusLogic_InquireTargetDevices,
@@ -1361,7 +1361,7 @@
? SetupInformation.SynchronousValuesID0to7[TargetID].Offset
: SetupInformation.SynchronousValuesID8to15[TargetID-8].Offset);
}
- if (strcmp(HostAdapter->FirmwareVersion, "5.06L") >= 0)
+ if (strcmp((char*)HostAdapter->FirmwareVersion, "5.06L") >= 0)
{
for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices;
TargetID++)
{
@@ -1399,6 +1399,7 @@
return TRUE;
}// end BusLogic_TargetDeviceInquiry
+VOID
BusLogic_InitializeCCB( PBuslogic_CCB_T CCB)
{
CCB->Opcode = BusLogic_InitiatorCCB;
@@ -1431,6 +1432,7 @@
}
BOOLEAN
+STDCALL
BT958HwStartIO(IN PVOID HwDeviceExtension,
IN PSCSI_REQUEST_BLOCK Srb
)
@@ -1449,9 +1451,9 @@
//______________________________________________________________________
____________
{
PHW_DEVICE_EXTENSION deviceExtension = HwDeviceExtension;
- PNONCACHED_EXTENSION noncachedExtension =
deviceExtension->NoncachedExtension;
+// PNONCACHED_EXTENSION noncachedExtension =
deviceExtension->NoncachedExtension;
BusLogic_HostAdapter_T *HostAdapter = &(deviceExtension->hcs);
- BusLogic_OutgoingMailbox_T mailboxOut;
+// BusLogic_OutgoingMailbox_T mailboxOut;
PSCSI_REQUEST_BLOCK AbortSRB;
PBuslogic_CCB_T ccb;
@@ -1739,12 +1741,12 @@
ULONG length;
- UCHAR *Cdb = Srb->Cdb;
- PCDB RealCdb ;
+// UCHAR *Cdb = Srb->Cdb;
+// PCDB RealCdb ;
UCHAR CDB_Length = Srb->CdbLength;
UCHAR TargetID = Srb->TargetId;
UCHAR LogicalUnit = Srb->Lun;
- void *BufferPointer = Srb->DataBuffer;
+// void *BufferPointer = Srb->DataBuffer;
int BufferLength = Srb->DataTransferLength;
if (Srb->DataTransferLength > 0)
@@ -1942,6 +1944,7 @@
BOOLEAN
+STDCALL
BT958HwInterrupt(IN PVOID HwDeviceExtension)
//______________________________________________________________________
___
// Routine Description:
@@ -1961,13 +1964,13 @@
//______________________________________________________________________
___
{
PHW_DEVICE_EXTENSION deviceExtension = HwDeviceExtension;
- PNONCACHED_EXTENSION noncachedExtension =
deviceExtension->NoncachedExtension;
+// PNONCACHED_EXTENSION noncachedExtension =
deviceExtension->NoncachedExtension;
BusLogic_HostAdapter_T *HostAdapter = &(deviceExtension->hcs);
- PBuslogic_CCB_T ccb;
- PSCSI_REQUEST_BLOCK srb;
+// PBuslogic_CCB_T ccb;
+// PSCSI_REQUEST_BLOCK srb;
- ULONG residualBytes;
- ULONG i;
+// ULONG residualBytes;
+// ULONG i;
BusLogic_InterruptRegister_T InterruptRegister;
@@ -2213,8 +2216,8 @@
case BusLogic_CommandCompletedWithError:
{
- PCDB RealCdb = (PCDB)CCB->CDB;
- DebugPrint((0,"%x Command completed with error
Host - %x Target %x \n",RealCdb->CDB6GENERIC.OperationCode,
+// PCDB RealCdb = (PCDB)CCB->CDB;
+ DebugPrint((0,"%x Command completed with error
Host - %x Target %x \n",((PCDB)CCB->CDB)->CDB6GENERIC.OperationCode,
CCB->HostAdapterStatus,
CCB->TargetDeviceStatus));
@@ -2290,7 +2293,7 @@
// This function returns the error code
that should be returned to port driver
//______________________________________________________________________
___________________
{
- UCHAR HostStatus;
+ UCHAR HostStatus = 0;
// Namita 2Oct CDROM issue
if (TargetDeviceStatus != BusLogic_OperationGood &&
(HostAdapterStatus == BusLogic_CommandCompletedNormally ||
@@ -2310,7 +2313,12 @@
{
HostStatus = SRB_STATUS_BUSY;
}
- }
+ break;
+ case BusLogic_OperationGood:
+
+ HostStatus = SRB_STATUS_SUCCESS;
+ break;
+ }
}
else
@@ -2404,6 +2412,7 @@
BOOLEAN
+STDCALL
BT958HwResetBus(IN PVOID HwDeviceExtension,
IN ULONG PathId)
//______________________________________________________________________
_______________
@@ -2420,8 +2429,8 @@
{
PHW_DEVICE_EXTENSION deviceExtension = HwDeviceExtension;
BusLogic_HostAdapter_T *HostAdapter = &(deviceExtension->hcs);
- BusLogic_CCB_T *CCB;
- int TargetID;
+// BusLogic_CCB_T *CCB;
+// int TargetID;
BOOLEAN Result;
BOOLEAN HardReset;
@@ -2571,6 +2580,7 @@
}
BOOLEAN
+STDCALL
BT958HwInitialize(IN PVOID HwDeviceExtension)
//______________________________________________________________________
_________
// Routine Description:
@@ -2601,6 +2611,7 @@
}// end BT958HwInitialize
SCSI_ADAPTER_CONTROL_STATUS
+STDCALL
BT958HwAdapterControl(IN PVOID HwDeviceExtension,
IN SCSI_ADAPTER_CONTROL_TYPE
ControlType,
IN PVOID Parameters)
@@ -2626,20 +2637,20 @@
{
PHW_DEVICE_EXTENSION deviceExtension = HwDeviceExtension;
BusLogic_HostAdapter_T *HostAdapter = &(deviceExtension->hcs);
- UCHAR *ParameterPointer;
- BusLogic_StatusRegister_T StatusRegister;
- BusLogic_InterruptRegister_T InterruptRegister;
- int Result,ParameterLength;
- long TimeoutCounter;
+// UCHAR *ParameterPointer;
+// BusLogic_StatusRegister_T StatusRegister;
+// BusLogic_InterruptRegister_T InterruptRegister;
+// int Result,ParameterLength;
+// long TimeoutCounter;
PSCSI_SUPPORTED_CONTROL_TYPE_LIST ControlTypeList;
ULONG AdjustedMaxControlType;
ULONG Index;
- UCHAR Retries;
+// UCHAR Retries;
// Default Status
- SCSI_ADAPTER_CONTROL_STATUS Status = ScsiAdapterControlSuccess;
+// SCSI_ADAPTER_CONTROL_STATUS Status = ScsiAdapterControlSuccess;
//
// Structure defining which functions this miniport supports
_____
Modified: trunk/reactos/drivers/storage/buslogic/BusLogic958.h
--- vendor/VMware/buslogic/current/BusLogic958.h 2005-08-18
21:37:18 UTC (rev 17433)
+++ trunk/reactos/drivers/storage/buslogic/BusLogic958.h
2005-08-18 21:59:20 UTC (rev 17434)
@@ -37,10 +37,18 @@
#ifndef _BT958_H_
#define _BT958_H_
-#include "miniport.h"
-#include "scsi.h"
-#include "scsiwmi.h"
+#include <ddk/ntddk.h>
+#include <ddk/srb.h>
+#include <ddk/scsi.h>
+#include <ddk/ntddscsi.h>
+#include <ddk/scsiwmi.h>
+//#include <ntos/kefuncs.h>
+
+//#include "miniport.h"
+//#include "scsi.h"
+//#include "scsiwmi.h"
+
//______________________________________________________________________
___________________
// #defines
//______________________________________________________________________
___________________
@@ -640,8 +648,9 @@
BusLogic_MCA_Bus = 5
}BusLogic_HostAdapterBusType_T;
+#if 0
static char *BusLogic_HostAdapterBusNames[] = { "Unknown", "ISA",
"EISA", "PCI", "VESA", "MCA" };
-
+#endif
static BusLogic_HostAdapterBusType_T
BusLogic_HostAdapterBusTypes[] ={ BusLogic_VESA_Bus, /* BT-4xx */
BusLogic_ISA_Bus, /* BT-5xx */
@@ -650,7 +659,6 @@
BusLogic_Unknown_Bus, /* BT-8xx */
BusLogic_PCI_Bus /* BT-9xx */
};
-
// Define the BusLogic Driver Host Adapter structure
typedef struct BusLogic_HostAdapter
{
@@ -802,44 +810,51 @@
// function declaractions
//______________________________________________________________________
___________________
ULONG
+STDCALL
DriverEntry(IN PVOID DriverObject,
IN PVOID Argument2
);
ULONG
+STDCALL
BT958HwFindAdapter(IN PVOID HwDeviceExtension,
IN PVOID Context,
IN PVOID BusInformation,
IN PCHAR ArgumentString,
IN OUT
PPORT_CONFIGURATION_INFORMATION ConfigInfo,
- OUT PBOOLEAN Again
- );
+ OUT PBOOLEAN Again);
-BOOLEAN
+BOOLEAN
+STDCALL
BT958HwInitialize(IN PVOID HwDeviceExtension);
BOOLEAN
+STDCALL
BT958HwStartIO(IN PVOID HwDeviceExtension,
IN PSCSI_REQUEST_BLOCK Srb
);
BOOLEAN
+STDCALL
BT958HwInterrupt(IN PVOID HwDeviceExtension);
BOOLEAN
+STDCALL
BT958HwResetBus(IN PVOID HwDeviceExtension,
IN ULONG PathId
);
SCSI_ADAPTER_CONTROL_STATUS
+STDCALL
BT958HwAdapterControl(IN PVOID HwDeviceExtension,
IN SCSI_ADAPTER_CONTROL_TYPE
ControlType,
IN PVOID Parameters
);
+#if 0
BOOLEAN
BT958WmiSrb(IN PHW_DEVICE_EXTENSION HwDeviceExtension,
IN OUT PSCSI_WMI_REQUEST_BLOCK Srb);
-
+#endif
void
BT958WmiInitialize( IN PHW_DEVICE_EXTENSION HwDeviceExtension);
_____
Added: trunk/reactos/drivers/storage/buslogic/README.ReactOS
--- vendor/VMware/buslogic/current/README.ReactOS 2005-08-18
21:37:18 UTC (rev 17433)
+++ trunk/reactos/drivers/storage/buslogic/README.ReactOS
2005-08-18 21:59:20 UTC (rev 17434)
@@ -0,0 +1,11 @@
+This code was published by VMware on their website at
+http://www.vmware.com/download/open_sources.html. The intro there says:
+
+This open source software is licensed under the terms of various open
source
+license agreements included with the materials relating to the open
source
+software. Copyrights in the open source software are held by the
copyright
+holders indicated in the copyright notices in the open source files.
You may
+download this software free of charge.
+
+The source files indicate they are GPL licenced, so we're ok to include
it
+in ReactOS.
Property changes on:
trunk/reactos/drivers/storage/buslogic/README.ReactOS
___________________________________________________________________
Name: svn:eol-style
+ native
_____
Added: trunk/reactos/drivers/storage/buslogic/buslogic.xml
--- vendor/VMware/buslogic/current/buslogic.xml 2005-08-18 21:37:18 UTC
(rev 17433)
+++ trunk/reactos/drivers/storage/buslogic/buslogic.xml 2005-08-18
21:59:20 UTC (rev 17434)
@@ -0,0 +1,10 @@
+<module name="buslogic" type="kernelmodedriver"
installbase="system32/drivers" installname="buslogic.sys">
+ <bootstrap base="reactos" />
+ <define name="__USE_W32API" />
+ <include base="buslogic">.</include>
+ <library>ntoskrnl</library>
+ <library>hal</library>
+ <library>scsiport</library>
+ <file>BusLogic958.c</file>
+ <file>BusLogic958.rc</file>
+</module>
Property changes on: trunk/reactos/drivers/storage/buslogic/buslogic.xml
___________________________________________________________________
Name: svn:eol-style
+ native
_____
Deleted: trunk/reactos/drivers/storage/buslogic/makefile
--- vendor/VMware/buslogic/current/makefile 2005-08-18 21:37:18 UTC
(rev 17433)
+++ trunk/reactos/drivers/storage/buslogic/makefile 2005-08-18
21:59:20 UTC (rev 17434)
@@ -1,7 +0,0 @@
-#
-# DO NOT EDIT THIS FILE!!! Edit .\sources. if you want to add a new
source
-# file to this component. This file merely indirects to the real make
file
-# that is shared by all the driver components of the Windows NT DDK
-#
-
-!INCLUDE $(NTMAKEENV)\makefile.def
_____
Copied: trunk/reactos/drivers/storage/buslogic/makefile.original (from
rev 17433, vendor/VMware/buslogic/current/makefile)
_____
Modified: trunk/reactos/drivers/storage/directory.xml
--- trunk/reactos/drivers/storage/directory.xml 2005-08-18 21:37:18 UTC
(rev 17433)
+++ trunk/reactos/drivers/storage/directory.xml 2005-08-18 21:59:20 UTC
(rev 17434)
@@ -1,6 +1,9 @@
<directory name="atapi">
<xi:include href="atapi/atapi.xml" />
</directory>
+<directory name="buslogic">
+ <xi:include href="buslogic/buslogic.xml" />
+</directory>
<directory name="cdrom">
<xi:include href="cdrom/cdrom.xml" />
</directory>
