Ros-diffs December 2008

ros-diffs@reactos.org

31 participants
710 discussions

[cwittich] 38484: sync wintrust and cryptui to wine 1.1.11

by cwittich＠svn.reactos.org

Author: cwittich Date: Wed Dec 31 03:26:01 2008 New Revision: 38484 URL: http://svn.reactos.org/svn/reactos?rev=38484&view=rev Log: sync wintrust and cryptui to wine 1.1.11 Added: trunk/reactos/dll/win32/cryptui/cert.bmp (with props) trunk/reactos/dll/win32/cryptui/certerror.bmp (with props) trunk/reactos/dll/win32/cryptui/certwarning.bmp (with props) trunk/reactos/dll/win32/cryptui/checks.bmp (with props) trunk/reactos/dll/win32/cryptui/cryptui.rc (with props) trunk/reactos/dll/win32/cryptui/cryptui_En.rc (with props) trunk/reactos/dll/win32/cryptui/cryptuires.h (with props) trunk/reactos/dll/win32/cryptui/smallicons.bmp (with props) trunk/reactos/include/psdk/cryptdlg.h (with props) Modified: trunk/reactos/dll/win32/cryptui/cryptui.rbuild trunk/reactos/dll/win32/cryptui/cryptui.spec trunk/reactos/dll/win32/cryptui/main.c trunk/reactos/dll/win32/wintrust/asn.c trunk/reactos/dll/win32/wintrust/crypt.c trunk/reactos/dll/win32/wintrust/softpub.c trunk/reactos/dll/win32/wintrust/wintrust.rbuild trunk/reactos/dll/win32/wintrust/wintrust.spec trunk/reactos/dll/win32/wintrust/wintrust_main.c trunk/reactos/dll/win32/wintrust/wintrust_priv.h trunk/reactos/include/psdk/cryptuiapi.h trunk/reactos/include/psdk/mscat.h trunk/reactos/include/psdk/wintrust.h [This mail would be too long, it was shortened to contain the URLs only.] Added: trunk/reactos/dll/win32/cryptui/cert.bmp URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/cert.bmp… Added: trunk/reactos/dll/win32/cryptui/certerror.bmp URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/certerro… Added: trunk/reactos/dll/win32/cryptui/certwarning.bmp URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/certwarn… Added: trunk/reactos/dll/win32/cryptui/checks.bmp URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/checks.b… Modified: trunk/reactos/dll/win32/cryptui/cryptui.rbuild URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/cryptui.… Added: trunk/reactos/dll/win32/cryptui/cryptui.rc URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/cryptui.… Modified: trunk/reactos/dll/win32/cryptui/cryptui.spec URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/cryptui.… Added: trunk/reactos/dll/win32/cryptui/cryptui_En.rc URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/cryptui_… Added: trunk/reactos/dll/win32/cryptui/cryptuires.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/cryptuir… Modified: trunk/reactos/dll/win32/cryptui/main.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/main.c?r… Added: trunk/reactos/dll/win32/cryptui/smallicons.bmp URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/cryptui/smallico… Modified: trunk/reactos/dll/win32/wintrust/asn.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/wintrust/asn.c?r… Modified: trunk/reactos/dll/win32/wintrust/crypt.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/wintrust/crypt.c… Modified: trunk/reactos/dll/win32/wintrust/softpub.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/wintrust/softpub… Modified: trunk/reactos/dll/win32/wintrust/wintrust.rbuild URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/wintrust/wintrus… Modified: trunk/reactos/dll/win32/wintrust/wintrust.spec URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/wintrust/wintrus… Modified: trunk/reactos/dll/win32/wintrust/wintrust_main.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/wintrust/wintrus… Modified: trunk/reactos/dll/win32/wintrust/wintrust_priv.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/wintrust/wintrus… Added: trunk/reactos/include/psdk/cryptdlg.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/include/psdk/cryptdlg.h?re… Modified: trunk/reactos/include/psdk/cryptuiapi.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/include/psdk/cryptuiapi.h?… Modified: trunk/reactos/include/psdk/mscat.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/include/psdk/mscat.h?rev=3… Modified: trunk/reactos/include/psdk/wintrust.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/include/psdk/wintrust.h?re…

15 years, 11 months

[dchapyshev] 38483: - Add check of params

by dchapyshev＠svn.reactos.org

Author: dchapyshev Date: Wed Dec 31 02:11:43 2008 New Revision: 38483 URL: http://svn.reactos.org/svn/reactos?rev=38483&view=rev Log: - Add check of params Modified: trunk/reactos/dll/win32/secur32/sspi.c Modified: trunk/reactos/dll/win32/secur32/sspi.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/secur32/sspi.c?r… ============================================================================== --- trunk/reactos/dll/win32/secur32/sspi.c [iso-8859-1] (original) +++ trunk/reactos/dll/win32/secur32/sspi.c [iso-8859-1] Wed Dec 31 02:11:43 2008 @@ -182,7 +182,14 @@ PVOID Bar) { UNIMPLEMENTED; - return ERROR_CALL_NOT_IMPLEMENTED; + + if (Handle) + { + Bar = NULL; + return ERROR_CALL_NOT_IMPLEMENTED; + } + + return SEC_E_INVALID_HANDLE; } SECURITY_STATUS @@ -192,7 +199,14 @@ PVOID Bar) { UNIMPLEMENTED; - return ERROR_CALL_NOT_IMPLEMENTED; + + if (Handle) + { + Bar = NULL; + return ERROR_CALL_NOT_IMPLEMENTED; + } + + return SEC_E_INVALID_HANDLE; } SECURITY_STATUS @@ -210,7 +224,15 @@ ) { UNIMPLEMENTED; - return ERROR_CALL_NOT_IMPLEMENTED; + + if (pszPackage) + { + phCred = NULL; + pExpires = NULL; + return ERROR_CALL_NOT_IMPLEMENTED; + } + + return SEC_E_SECPKG_NOT_FOUND; } SECURITY_STATUS @@ -228,7 +250,15 @@ ) { UNIMPLEMENTED; - return ERROR_CALL_NOT_IMPLEMENTED; + + if (pszPackage) + { + phCred = NULL; + pExpires = NULL; + return ERROR_CALL_NOT_IMPLEMENTED; + } + + return SEC_E_SECPKG_NOT_FOUND; } SECURITY_STATUS @@ -309,7 +339,13 @@ ) { UNIMPLEMENTED; - return ERROR_CALL_NOT_IMPLEMENTED; + + if (pszPackageName) + { + *ppPackageInfo = NULL; + return ERROR_CALL_NOT_IMPLEMENTED; + } + return SEC_E_SECPKG_NOT_FOUND; } SECURITY_STATUS @@ -320,7 +356,13 @@ ) { UNIMPLEMENTED; - return ERROR_CALL_NOT_IMPLEMENTED; + + if (pszPackageName) + { + *ppPackageInfo = NULL; + return ERROR_CALL_NOT_IMPLEMENTED; + } + return SEC_E_SECPKG_NOT_FOUND; } SECURITY_STATUS @@ -433,7 +475,14 @@ ) { UNIMPLEMENTED; - return ERROR_CALL_NOT_IMPLEMENTED; + + if (phCredential) + { + pBuffer = NULL; + return ERROR_CALL_NOT_IMPLEMENTED; + } + + return SEC_E_INVALID_HANDLE; } SECURITY_STATUS @@ -445,7 +494,14 @@ ) { UNIMPLEMENTED; - return ERROR_CALL_NOT_IMPLEMENTED; + + if (phCredential) + { + pBuffer = NULL; + return ERROR_CALL_NOT_IMPLEMENTED; + } + + return SEC_E_INVALID_HANDLE; } SECURITY_STATUS

15 years, 11 months

[cwittich] 38482: add dwmapi from wine 1.1.11

by cwittich＠svn.reactos.org

Author: cwittich Date: Wed Dec 31 02:02:56 2008 New Revision: 38482 URL: http://svn.reactos.org/svn/reactos?rev=38482&view=rev Log: add dwmapi from wine 1.1.11 Added: trunk/reactos/dll/win32/dwmapi/ (with props) trunk/reactos/dll/win32/dwmapi/dwmapi.rbuild (with props) trunk/reactos/dll/win32/dwmapi/dwmapi.spec (with props) trunk/reactos/dll/win32/dwmapi/dwmapi_main.c (with props) trunk/reactos/dll/win32/dwmapi/version.rc (with props) trunk/reactos/include/psdk/dwmapi.h (with props) Modified: trunk/reactos/baseaddress.rbuild trunk/reactos/boot/bootdata/packages/reactos.dff trunk/reactos/dll/win32/win32.rbuild Modified: trunk/reactos/baseaddress.rbuild URL: http://svn.reactos.org/svn/reactos/trunk/reactos/baseaddress.rbuild?rev=384… ============================================================================== --- trunk/reactos/baseaddress.rbuild [iso-8859-1] (original) +++ trunk/reactos/baseaddress.rbuild [iso-8859-1] Wed Dec 31 02:02:56 2008 @@ -7,6 +7,7 @@ <property name="BASEADDRESS_DEVENUM" value="0x35680000" /> <property name="BASEADDRESS_RSABASE" value="0x35700000" /> <property name="BASEADDRESS_RSAENH" value="0x35780000" /> + <property name="BASEADDRESS_DWMAPI" value="0x4A3F0000" /> <property name="BASEADDRESS_MPRAPI" value="0x4C400000" /> <property name="BASEADDRESS_PSTOREC" value="0x513D0000" /> <property name="BASEADDRESS_LPK" value="0x516C0000" /> Modified: trunk/reactos/boot/bootdata/packages/reactos.dff URL: http://svn.reactos.org/svn/reactos/trunk/reactos/boot/bootdata/packages/rea… ============================================================================== --- trunk/reactos/boot/bootdata/packages/reactos.dff [iso-8859-1] (original) +++ trunk/reactos/boot/bootdata/packages/reactos.dff [iso-8859-1] Wed Dec 31 02:02:56 2008 @@ -249,6 +249,7 @@ dll\win32\cryptui\cryptui.dll 1 dll\win32\dbghelp\dbghelp.dll 1 dll\win32\dciman32\dciman32.dll 1 +dll\win32\dwmapi\dwmapi.dll 1 dll\win32\devmgr\devmgr.dll 1 dll\win32\dhcpcsvc\dhcpcsvc.dll 1 dll\win32\dnsapi\dnsapi.dll 1 Propchange: trunk/reactos/dll/win32/dwmapi/ ------------------------------------------------------------------------------ --- bugtraq:logregex (added) +++ bugtraq:logregex Wed Dec 31 02:02:56 2008 @@ -1,0 +1,2 @@ +([Ii]ssue|[Bb]ug)s? #?(\d+)(,? ?#?(\d+))*(,? ?(and |or )?#?(\d+))? +(\d+) Propchange: trunk/reactos/dll/win32/dwmapi/ ------------------------------------------------------------------------------ bugtraq:message = See issue #%BUGID% for more details. Propchange: trunk/reactos/dll/win32/dwmapi/ ------------------------------------------------------------------------------ bugtraq:url = http://www.reactos.org/bugzilla/show_bug.cgi?id=%BUGID% Propchange: trunk/reactos/dll/win32/dwmapi/ ------------------------------------------------------------------------------ tsvn:logminsize = 10 Added: trunk/reactos/dll/win32/dwmapi/dwmapi.rbuild URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/dwmapi/dwmapi.rb… ============================================================================== --- trunk/reactos/dll/win32/dwmapi/dwmapi.rbuild (added) +++ trunk/reactos/dll/win32/dwmapi/dwmapi.rbuild [iso-8859-1] Wed Dec 31 02:02:56 2008 @@ -1,0 +1,15 @@ +<?xml version="1.0"?> +<!DOCTYPE module SYSTEM "../../../tools/rbuild/project.dtd"> +<group> +<module name="dwmapi" type="win32dll" baseaddress="${BASEADDRESS_DWMAPI}" installbase="system32" installname="dwmapi.dll" allowwarnings="true"> + <importlibrary definition="dwmapi.spec" /> + <include base="dwmapi">.</include> + <include base="ReactOS">include/reactos/wine</include> + <define name="__WINESRC__" /> + <file>dwmapi_main.c</file> + <file>version.rc</file> + <library>wine</library> + <library>kernel32</library> + <library>ntdll</library> +</module> +</group> Propchange: trunk/reactos/dll/win32/dwmapi/dwmapi.rbuild ------------------------------------------------------------------------------ svn:eol-style = native Added: trunk/reactos/dll/win32/dwmapi/dwmapi.spec URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/dwmapi/dwmapi.sp… ============================================================================== --- trunk/reactos/dll/win32/dwmapi/dwmapi.spec (added) +++ trunk/reactos/dll/win32/dwmapi/dwmapi.spec [iso-8859-1] Wed Dec 31 02:02:56 2008 @@ -1,0 +1,44 @@ +100 stub @ +101 stub @ +102 stdcall DwmEnableComposition (long) +103 stub @ +104 stub @ +105 stub @ +106 stub @ +107 stub @ +108 stub @ +109 stub @ +110 stub @ +111 stub @ +112 stub @ +113 stub @ + +115 stub @ +116 stub @ +117 stub @ +118 stub @ +119 stub @ +120 stub @ + +@ stub DwmAttachMilContent +@ stub DwmDefWindowProc +@ stub DwmDetachMilContent +@ stub DwmEnableBlurBehindWindow +@ stub DwmEnableMMCSS +@ stdcall DwmExtendFrameIntoClientArea(long ptr) +@ stdcall DwmFlush() +@ stdcall DwmGetColorizationColor(ptr long) +@ stub DwmGetCompositionTimingInfo +@ stub DwmGetGraphicsStreamClient +@ stub DwmGetGraphicsStreamTransformHint +@ stub DwmGetTransportAttributes +@ stub DwmGetWindowAttribute +@ stdcall DwmIsCompositionEnabled(ptr) +@ stub DwmModifyPreviousDxFrameDuration +@ stub DwmQueryThumbnailSourceSize +@ stub DwmRegisterThumbnail +@ stub DwmSetDxFrameDuration +@ stub DwmSetPresentParameters +@ stdcall DwmSetWindowAttribute(long long ptr long) +@ stdcall DwmUnregisterThumbnail(long) +@ stub DwmUpdateThumbnailProperties Propchange: trunk/reactos/dll/win32/dwmapi/dwmapi.spec ------------------------------------------------------------------------------ svn:eol-style = native Added: trunk/reactos/dll/win32/dwmapi/dwmapi_main.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/dwmapi/dwmapi_ma… ============================================================================== --- trunk/reactos/dll/win32/dwmapi/dwmapi_main.c (added) +++ trunk/reactos/dll/win32/dwmapi/dwmapi_main.c [iso-8859-1] Wed Dec 31 02:02:56 2008 @@ -1,0 +1,121 @@ +/* + * Dwmapi + * + * Copyright 2007 Andras Kovacs + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA + * + */ + +#include "config.h" +#include <stdarg.h> + +#define NONAMELESSUNION +#define NONAMELESSSTRUCT +#define COBJMACROS +#include "windef.h" +#include "winbase.h" +#include "wingdi.h" +#include "winuser.h" +#include "dwmapi.h" +#include "wine/debug.h" + +WINE_DEFAULT_DEBUG_CHANNEL(dwmapi); + + +/* At process attach */ +BOOL WINAPI DllMain(HINSTANCE hInstDLL, DWORD fdwReason, LPVOID lpv) +{ + switch(fdwReason) + { + case DLL_WINE_PREATTACH: + return FALSE; /* prefer native version */ + case DLL_PROCESS_ATTACH: + DisableThreadLibraryCalls( hInstDLL ); + break; + } + return TRUE; +} + +/********************************************************************** + * DwmIsCompositionEnabled (DWMAPI.@) + */ +HRESULT WINAPI DwmIsCompositionEnabled(BOOL *enabled) +{ + FIXME("%p\n", enabled); + + *enabled = FALSE; + return S_OK; +} + +/********************************************************************** + * DwmEnableComposition (DWMAPI.102) + */ +HRESULT WINAPI DwmEnableComposition(UINT uCompositionAction) +{ + FIXME("(%d) stub\n", uCompositionAction); + + return S_OK; +} + +/********************************************************************** + * DwmExtendFrameIntoClientArea (DWMAPI.@) + */ +HRESULT WINAPI DwmExtendFrameIntoClientArea(HWND hwnd, const MARGINS* margins) +{ + FIXME("(%p, %p) stub\n", hwnd, margins); + + return E_NOTIMPL; +} + +/********************************************************************** + * DwmGetColorizationColor (DWMAPI.@) + */ +HRESULT WINAPI DwmGetColorizationColor(DWORD *colorization, BOOL opaque_blend) +{ + FIXME("(%p, %d) stub\n", colorization, opaque_blend); + + return E_NOTIMPL; +} + +/********************************************************************** + * DwmFlush (DWMAPI.@) + */ +HRESULT WINAPI DwmFlush() +{ + FIXME("() stub\n"); + + return E_NOTIMPL; +} + +/********************************************************************** + * DwmSetWindowAttribute (DWMAPI.@) + */ +HRESULT WINAPI DwmSetWindowAttribute(HWND hwnd, DWORD attributenum, LPCVOID attribute, DWORD size) +{ + FIXME("(%p, %x, %p, %x) stub\n", hwnd, attributenum, attribute, size); + + return E_NOTIMPL; +} + +/********************************************************************** + * DwmUnregisterThumbnail (DWMAPI.@) + */ +HRESULT WINAPI DwmUnregisterThumbnail(HTHUMBNAIL thumbnail) +{ + FIXME("(%p) stub\n", thumbnail); + + return E_NOTIMPL; +} Propchange: trunk/reactos/dll/win32/dwmapi/dwmapi_main.c ------------------------------------------------------------------------------ svn:eol-style = native Added: trunk/reactos/dll/win32/dwmapi/version.rc URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/dwmapi/version.r… ============================================================================== --- trunk/reactos/dll/win32/dwmapi/version.rc (added) +++ trunk/reactos/dll/win32/dwmapi/version.rc [iso-8859-1] Wed Dec 31 02:02:56 2008 @@ -1,0 +1,26 @@ +/* + * Copyright 2007 Andras Kovacs + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#define WINE_FILEDESCRIPTION_STR "Desktop Window Manager API" +#define WINE_FILENAME_STR "dwmapi.dll" +#define WINE_FILEVERSION 6,0,6000,16386 +#define WINE_FILEVERSION_STR "6.0.6000.16386" +#define WINE_PRODUCTVERSION 6,0,6000,16386 +#define WINE_PRODUCTVERSION_STR "6.0.6000.16386" + +#include "wine/wine_common_ver.rc" Propchange: trunk/reactos/dll/win32/dwmapi/version.rc ------------------------------------------------------------------------------ svn:eol-style = native Modified: trunk/reactos/dll/win32/win32.rbuild URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/win32.rbuild?rev… ============================================================================== --- trunk/reactos/dll/win32/win32.rbuild [iso-8859-1] (original) +++ trunk/reactos/dll/win32/win32.rbuild [iso-8859-1] Wed Dec 31 02:02:56 2008 @@ -76,6 +76,9 @@ <directory name="dciman32"> <xi:include href="dciman32/dciman32.rbuild" /> </directory> +<directory name="dwmapi"> + <xi:include href="dwmapi/dwmapi.rbuild" /> +</directory> <directory name="devmgr"> <xi:include href="devmgr/devmgr.rbuild" /> </directory> Added: trunk/reactos/include/psdk/dwmapi.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/include/psdk/dwmapi.h?rev=… ============================================================================== --- trunk/reactos/include/psdk/dwmapi.h (added) +++ trunk/reactos/include/psdk/dwmapi.h [iso-8859-1] Wed Dec 31 02:02:56 2008 @@ -1,0 +1,45 @@ +/* + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#ifndef __WINE_DWMAPI_H +#define __WINE_DWMAPI_H + +#include "wtypes.h" +#include "uxtheme.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef DWMAPI +# define DWMAPI STDAPI +# define DWMAPI_(type) STDAPI_(type) +#endif + +DECLARE_HANDLE(HTHUMBNAIL); + +DWMAPI DwmEnableComposition(UINT); +DWMAPI DwmExtendFrameIntoClientArea(HWND,const MARGINS*); +DWMAPI DwmGetColorizationColor(DWORD*,BOOL); +DWMAPI DwmIsCompositionEnabled(BOOL*); +DWMAPI DwmSetWindowAttribute(HWND, DWORD, LPCVOID, DWORD); +DWMAPI DwmUnregisterThumbnail(HTHUMBNAIL); + +#ifdef __cplusplus +} +#endif + +#endif /* __WINE_DWMAPI_H */ Propchange: trunk/reactos/include/psdk/dwmapi.h ------------------------------------------------------------------------------ svn:eol-style = native

15 years, 11 months

[jmorlan] 38481: Make IF /? work again

by jmorlan＠svn.reactos.org

Author: jmorlan Date: Tue Dec 30 17:55:50 2008 New Revision: 38481 URL: http://svn.reactos.org/svn/reactos?rev=38481&view=rev Log: Make IF /? work again Modified: trunk/reactos/base/shell/cmd/cmdtable.c trunk/reactos/base/shell/cmd/if.c trunk/reactos/base/shell/cmd/parser.c Modified: trunk/reactos/base/shell/cmd/cmdtable.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/base/shell/cmd/cmdtable.c?… ============================================================================== --- trunk/reactos/base/shell/cmd/cmdtable.c [iso-8859-1] (original) +++ trunk/reactos/base/shell/cmd/cmdtable.c [iso-8859-1] Tue Dec 30 17:55:50 2008 @@ -120,7 +120,7 @@ {_T("history"), 0, CommandHistory}, #endif -// {_T("if"), 0, cmd_if}, + {_T("if"), 0, cmd_if}, #ifdef INCLUDE_CMD_LABEL {_T("label"), 0, cmd_label}, Modified: trunk/reactos/base/shell/cmd/if.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/base/shell/cmd/if.c?rev=38… ============================================================================== --- trunk/reactos/base/shell/cmd/if.c [iso-8859-1] (original) +++ trunk/reactos/base/shell/cmd/if.c [iso-8859-1] Tue Dec 30 17:55:50 2008 @@ -49,13 +49,8 @@ return StringCmp(Left, Right); } -BOOL ExecuteIf(PARSED_COMMAND *Cmd) +INT cmd_if (LPTSTR param) { - INT result = FALSE; /* when set cause 'then' clause to be executed */ - LPTSTR param; - -#if 0 - /* FIXME: need to handle IF /?; will require special parsing */ TRACE ("cmd_if: (\'%s\')\n", debugstr_aw(param)); if (!_tcsncmp (param, _T("/?"), 2)) @@ -63,7 +58,15 @@ ConOutResPaging(TRUE,STRING_IF_HELP1); return 0; } -#endif + + error_syntax(param); + return 1; +} + +BOOL ExecuteIf(PARSED_COMMAND *Cmd) +{ + INT result = FALSE; /* when set cause 'then' clause to be executed */ + LPTSTR param; if (Cmd->If.Operator == IF_CMDEXTVERSION) { Modified: trunk/reactos/base/shell/cmd/parser.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/base/shell/cmd/parser.c?re… ============================================================================== --- trunk/reactos/base/shell/cmd/parser.c [iso-8859-1] (original) +++ trunk/reactos/base/shell/cmd/parser.c [iso-8859-1] Tue Dec 30 17:55:50 2008 @@ -332,7 +332,7 @@ memset(Cmd, 0, sizeof(PARSED_COMMAND)); Cmd->Type = C_IF; - int Type = ParseToken(0, STANDARD_SEPS); + int Type = CurrentTokenType; if (_tcsicmp(CurrentToken, _T("/I")) == 0) { Cmd->If.Flags |= IFFLAG_IGNORECASE; @@ -488,13 +488,19 @@ /* Check for special forms */ if (_tcsicmp(ParsedLine, _T("if")) == 0) { - if (RedirList) - { - ParseError(); - FreeRedirection(RedirList); - return NULL; - } - return ParseIf(); + ParseToken(0, STANDARD_SEPS); + /* Do special parsing only if it's not followed by /? */ + if (_tcscmp(CurrentToken, _T("/?")) != 0) + { + if (RedirList) + { + ParseError(); + FreeRedirection(RedirList); + return NULL; + } + return ParseIf(); + } + Pos = _stpcpy(Pos, _T(" /?")); } /* Now get the tail */

15 years, 11 months

[hyperion] 38480: modified include/reactos/libs/pseh/pseh2.h modified lib/pseh/framebased-gcchack.c Call _SEH2EnterFrame before any goto. Gotos confuse GCC's flow control analysis making it disregard the returns_twice attribute on _SEH2EnterFrame. We avoid redundant inline code (NULL-initializing the top trylevel pointer) by modifying the library accordingly

by hyperion＠svn.reactos.org

Author: hyperion Date: Tue Dec 30 15:05:36 2008 New Revision: 38480 URL: http://svn.reactos.org/svn/reactos?rev=38480&view=rev Log: modified include/reactos/libs/pseh/pseh2.h modified lib/pseh/framebased-gcchack.c Call _SEH2EnterFrame before any goto. Gotos confuse GCC's flow control analysis making it disregard the returns_twice attribute on _SEH2EnterFrame. We avoid redundant inline code (NULL-initializing the top trylevel pointer) by modifying the library accordingly Modified: trunk/reactos/include/reactos/libs/pseh/pseh2.h trunk/reactos/lib/pseh/framebased-gcchack.c Modified: trunk/reactos/include/reactos/libs/pseh/pseh2.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/include/reactos/libs/pseh/… ============================================================================== --- trunk/reactos/include/reactos/libs/pseh/pseh2.h [iso-8859-1] (original) +++ trunk/reactos/include/reactos/libs/pseh/pseh2.h [iso-8859-1] Tue Dec 30 15:05:36 2008 @@ -212,14 +212,15 @@ (void)_SEH2FrameP; \ (void)_SEH2TryLevelP; \ \ + if(_SEHTopTryLevel) \ + _SEH2EnterFrame(_SEH2FrameP); \ + \ _SEHTryLevel.ST_Next = _SEHPrevTryLevelP; \ goto _SEHBeforeTry; \ \ _SEHDoTry:; \ - __SEH_ENTER_TRYLEVEL(); \ - \ - if(_SEHTopTryLevel) \ - _SEH2EnterFrame(_SEH2FrameP); \ + \ + __SEH_ENTER_TRYLEVEL(); #define __SEH_END_SCOPE \ } \ Modified: trunk/reactos/lib/pseh/framebased-gcchack.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/lib/pseh/framebased-gcchac… ============================================================================== --- trunk/reactos/lib/pseh/framebased-gcchack.c [iso-8859-1] (original) +++ trunk/reactos/lib/pseh/framebased-gcchack.c [iso-8859-1] Tue Dec 30 15:05:36 2008 @@ -241,6 +241,7 @@ void __cdecl _SEH2EnterFrame(_SEH2Frame_t * frame) { frame->SF_Registration.SER_Handler = __SEH2FrameHandler; + frame->SF_TopTryLevel = 0; frame->SF_Code = 0; __SEH2EnterFrame(&frame->SF_Registration); }

15 years, 11 months

[gedmurphy] 38479: update doxygen config to doxygen 1.5.8 Incorporates various changes to the existing config and introduces some new features.

by gedmurphy＠svn.reactos.org

Author: gedmurphy Date: Tue Dec 30 14:52:17 2008 New Revision: 38479 URL: http://svn.reactos.org/svn/reactos?rev=38479&view=rev Log: update doxygen config to doxygen 1.5.8 Incorporates various changes to the existing config and introduces some new features. Modified: trunk/reactos/Doxyfile Modified: trunk/reactos/Doxyfile URL: http://svn.reactos.org/svn/reactos/trunk/reactos/Doxyfile?rev=38479&r1=3847… ============================================================================== --- trunk/reactos/Doxyfile [iso-8859-1] (original) +++ trunk/reactos/Doxyfile [iso-8859-1] Tue Dec 30 14:52:17 2008 @@ -1,4 +1,4 @@ -# Doxyfile 1.5.3 +# Doxyfile 1.5.8 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project @@ -14,11 +14,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file that -# follow. The default is UTF-8 which is also the encoding used for all text before -# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into -# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of -# possible encodings. +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. DOXYFILE_ENCODING = UTF-8 @@ -31,14 +31,14 @@ # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = +PROJECT_NUMBER = "0.4-SVN 30-12-12" # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # base path where the generated documentation will be put. # If a relative path is entered, it will be relative to the location # where doxygen was started. If left blank the current directory will be used. -OUTPUT_DIRECTORY = doxy-doc +OUTPUT_DIRECTORY = Doxygen # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create # 4096 sub-directories (in 2 levels) under the output directory of each output @@ -47,17 +47,18 @@ # source files, where putting all generated files in the same directory would # otherwise cause performance problems for the file system. -CREATE_SUBDIRS = NO +CREATE_SUBDIRS = YES # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. # The default language is English, other supported languages are: # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, -# Italian, Japanese, Japanese-en (Japanese with English messages), Korean, -# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, -# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. +# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, +# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, +# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, +# Spanish, Swedish, and Ukrainian. OUTPUT_LANGUAGE = English @@ -146,7 +147,7 @@ # comments will behave just like regular Qt-style comments # (thus requiring an explicit @brief command for a brief description.) -JAVADOC_AUTOBRIEF = YES +JAVADOC_AUTOBRIEF = NO # If the QT_AUTOBRIEF tag is set to YES then Doxygen will # interpret the first line (until the first dot) of a Qt-style @@ -164,13 +165,6 @@ MULTILINE_CPP_IS_BRIEF = NO -# If the DETAILS_AT_TOP tag is set to YES then Doxygen -# will output the detailed description near the top, like JavaDoc. -# If set to NO, the detailed description appears after the member -# documentation. - -DETAILS_AT_TOP = NO - # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented # member inherits the documentation from any documented member that it # re-implements. @@ -186,7 +180,7 @@ # The TAB_SIZE tag can be used to set the number of spaces in a tab. # Doxygen uses this value to replace tabs by spaces in code fragments. -TAB_SIZE = 8 +TAB_SIZE = 4 # This tag can be used to specify a number of aliases that acts # as commands in the documentation. An alias has the form "name=value". @@ -205,14 +199,37 @@ OPTIMIZE_OUTPUT_FOR_C = YES # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for Java. -# For instance, namespaces will be presented as packages, qualified scopes -# will look different, etc. +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to -# include (a tag file for) the STL sources as input, then you should +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it parses. +# With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this tag. +# The format is ext=language, where ext is a file extension, and language is one of +# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, +# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. # func(std::string) {}). This also make the inheritance and collaboration @@ -220,10 +237,25 @@ BUILTIN_STL_SUPPORT = NO -# If you use Microsoft's C++/CLI language, you should set this option to YES to +# If you use Microsoft's C++/CLI language, you should set this option to YES to # enable parsing support. CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen to replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # tag is set to YES, then doxygen will reuse the documentation of the first @@ -240,6 +272,32 @@ SUBGROUPING = YES +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = YES + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penality. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will rougly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -274,10 +332,11 @@ EXTRACT_LOCAL_METHODS = NO -# If this flag is set to YES, the members of anonymous namespaces will be extracted -# and appear in the documentation as a namespace called 'anonymous_namespace{file}', -# where file will be replaced with the base name of the file that contains the anonymous -# namespace. By default anonymous namespace are hidden. +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespace are hidden. EXTRACT_ANON_NSPACES = NO @@ -315,7 +374,7 @@ # to NO (the default) then the documentation will be excluded. # Set it to YES to include the internal documentation. -INTERNAL_DOCS = YES +INTERNAL_DOCS = NO # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate # file names in lower-case letters. If set to YES upper-case letters are also @@ -323,7 +382,7 @@ # in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. -CASE_SENSE_NAMES = YES +CASE_SENSE_NAMES = NO # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen # will show members with their full class and namespace scopes in the @@ -356,11 +415,17 @@ SORT_BRIEF_DOCS = NO +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be # sorted by fully-qualified names, including namespaces. If set to # NO (the default), the class list will be sorted only by class name, # not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. # Note: This option applies only to the class list, not to the # alphabetical list. @@ -370,25 +435,25 @@ # disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. -GENERATE_TODOLIST = YES +GENERATE_TODOLIST = NO # The GENERATE_TESTLIST tag can be used to enable (YES) or # disable (NO) the test list. This list is created by putting \test # commands in the documentation. -GENERATE_TESTLIST = YES +GENERATE_TESTLIST = NO # The GENERATE_BUGLIST tag can be used to enable (YES) or # disable (NO) the bug list. This list is created by putting \bug # commands in the documentation. -GENERATE_BUGLIST = YES +GENERATE_BUGLIST = NO # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or # disable (NO) the deprecated list. This list is created by putting # \deprecated commands in the documentation. -GENERATE_DEPRECATEDLIST= YES +GENERATE_DEPRECATEDLIST= NO # The ENABLED_SECTIONS tag can be used to enable conditional # documentation sections, marked by \if sectionname ... \endif. @@ -415,17 +480,38 @@ # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy # in the documentation. The default is NO. -SHOW_DIRECTORIES = NO +SHOW_DIRECTORIES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = NO # The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from the -# version control system). Doxygen will invoke the program by executing (via +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via # popen()) the command <command> <input-file>, where <command> is the value of # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file # provided by doxygen. Whatever the program writes to standard output # is used as the file version. See the manual for examples. FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by +# doxygen. The layout file controls the global structure of the generated output files +# in an output format independent way. The create the layout file that represents +# doxygen's defaults, run doxygen with the -l option. You can optionally specify a +# file name after the option, if omitted DoxygenLayout.xml will be used as the name +# of the layout file. + +LAYOUT_FILE = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages @@ -470,7 +556,7 @@ # $version, which will be replaced by the version of the file (if it could # be obtained via FILE_VERSION_FILTER) -WARN_FORMAT = "$file:$line: $text " +WARN_FORMAT = "$file:$line: $text" # The WARN_LOGFILE tag can be used to specify a file to which warning # and error messages should be written. If left blank the output is written @@ -487,12 +573,13 @@ # directories like "/usr/src/myproject". Separate the files or directories # with spaces. -INPUT = - -# This tag can be used to specify the character encoding of the source files that -# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default -# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. -# See http://www.gnu.org/software/libiconv for the list of possible encodings. +INPUT = + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. INPUT_ENCODING = UTF-8 @@ -501,13 +588,16 @@ # and *.h) to filter out the source-files in the directories. If left # blank the following patterns are tested: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 FILE_PATTERNS = *.c \ + *.cxx \ + *.cpp \ + *.c++ \ *.h \ - *.cpp \ - *.cc \ - *.cx + *.hh \ + *.hpp \ + *.idl # The RECURSIVE tag can be used to turn specify whether or not subdirectories # should be searched for input files as well. Possible values are YES and NO. @@ -519,8 +609,7 @@ # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. -EXCLUDE = subsystems/win32/win32k \ - base/shell/explorer +EXCLUDE = # The EXCLUDE_SYMLINKS tag can be used select whether or not files or # directories that are symbolic links (a Unix filesystem feature) are excluded @@ -534,12 +623,13 @@ # against the file with absolute path, so to exclude all test directories # for example use the pattern */test/* -EXCLUDE_PATTERNS = +EXCLUDE_PATTERNS = */.svn # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the output. -# The symbol name can be a fully qualified name, a word, or if the wildcard * is used, -# a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test EXCLUDE_SYMBOLS = @@ -561,7 +651,7 @@ # commands irrespective of the value of the RECURSIVE tag. # Possible values are YES and NO. If left blank NO is used. -EXAMPLE_RECURSIVE = YES +EXAMPLE_RECURSIVE = NO # The IMAGE_PATH tag can be used to specify one or more files or # directories that contain image that are included in the documentation (see @@ -601,16 +691,14 @@ # If the SOURCE_BROWSER tag is set to YES then a list of source files will # be generated. Documented entities will be cross-referenced with these sources. # Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH -# then you must also enable this option. If you don't then doxygen will produce -# a warning and turn it on anyway +# VERBATIM_HEADERS is set to NO. SOURCE_BROWSER = YES # Setting the INLINE_SOURCES tag to YES will include the body # of functions and classes directly in the documentation. -INLINE_SOURCES = YES +INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code @@ -618,22 +706,22 @@ STRIP_CODE_COMMENTS = YES -# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# If the REFERENCED_BY_RELATION tag is set to YES # then for each documented function all documented # functions referencing it will be listed. -REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES (the default) +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES # then for each documented function all documented entities # called/used by that function will be listed. -REFERENCES_RELATION = YES - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. Otherwise they will link to the documentstion. +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentation. REFERENCES_LINK_SOURCE = YES @@ -722,20 +810,46 @@ HTML_ALIGN_MEMBERS = YES -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). -HTML_DYNAMIC_SECTIONS = NO +HTML_DYNAMIC_SECTIONS = YES + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can # be used to specify the file name of the resulting .chm file. You @@ -757,6 +871,12 @@ GENERATE_CHI = NO +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag # controls whether a binary table of contents is generated (YES) or a # normal table of contents (NO) in the .chm file. @@ -768,6 +888,55 @@ TOC_EXPAND = NO +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER +# are set, an additional index file will be generated that can be used as input for +# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated +# HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. +# For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see +# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's +# filter section matches. +# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + # The DISABLE_INDEX tag can be used to turn on/off the condensed index at # top of each HTML page. The value NO (the default) enables the index and # the value YES disables it. @@ -779,20 +948,36 @@ ENUM_VALUES_PER_LINE = 4 -# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be -# generated containing a tree-like index structure (just like the one that +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to FRAME, a side panel will be generated +# containing a tree-like index structure (just like the one that # is generated for HTML Help). For this to work a browser that supports # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are -# probably better off using the HTML help feature. - -GENERATE_TREEVIEW = NO +# probably better off using the HTML help feature. Other possible values +# for this tag are: HIERARCHIES, which will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list; +# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which +# disables this behavior completely. For backwards compatibility with previous +# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE +# respectively. + +GENERATE_TREEVIEW = NONE # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. TREEVIEW_WIDTH = 250 + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 #--------------------------------------------------------------------------- # configuration options related to the LaTeX output @@ -849,13 +1034,13 @@ # contain links (just like the HTML output) instead of page references # This makes the output suitable for online browsing using a pdf viewer. -PDF_HYPERLINKS = NO +PDF_HYPERLINKS = YES # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of # plain latex in the generated Makefile. Set this option to YES to get a # higher quality PDF documentation. -USE_PDFLATEX = NO +USE_PDFLATEX = YES # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. # command to the generated LaTeX files. This will instruct LaTeX to keep @@ -890,7 +1075,7 @@ # RTF documents. This may be useful for small projects and may help to # save some trees in general. -COMPACT_RTF = YES +COMPACT_RTF = NO # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated # will contain hyperlink fields. The RTF file will @@ -899,7 +1084,7 @@ # programs which support those fields. # Note: wordpad (write) and others do not support links. -RTF_HYPERLINKS = YES +RTF_HYPERLINKS = NO # Load stylesheet definitions from file. Syntax is similar to doxygen's # config file, i.e. a series of assignments. You only have to provide @@ -948,7 +1133,7 @@ # generate an XML file that captures the structure of # the code including all documentation. -GENERATE_XML = YES +GENERATE_XML = NO # The XML_OUTPUT tag is used to specify where the XML pages will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be @@ -1052,14 +1237,14 @@ # contain include files that are not input files but should be processed by # the preprocessor. -INCLUDE_PATH = include +INCLUDE_PATH = # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # patterns (like *.h and *.hpp) to filter out the header-files in the # directories. If left blank, the patterns specified with FILE_PATTERNS will # be used. -INCLUDE_FILE_PATTERNS = *.h +INCLUDE_FILE_PATTERNS = # The PREDEFINED tag can be used to specify one or more macro names that # are defined before the preprocessor is started (similar to the -D option of @@ -1099,9 +1284,9 @@ # TAGFILES = file1=loc1 "file2 = loc2" ... # where "loc1" and "loc2" can be relative or absolute paths or # URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) # If a tag file is not located in the directory in which doxygen # is run, you must also specify the path to the tagfile here. @@ -1143,10 +1328,11 @@ CLASS_DIAGRAMS = NO # You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to -# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to -# specify the directory where the mscgen tool resides. If left empty the tool is assumed to -# be found in the default search path. +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. MSCGEN_PATH = @@ -1154,7 +1340,7 @@ # inheritance and usage relations if the target is undocumented # or is not a class. -HIDE_UNDOC_RELATIONS = NO +HIDE_UNDOC_RELATIONS = YES # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # available from the path. This tool is part of Graphviz, a graph visualization @@ -1163,6 +1349,29 @@ HAVE_DOT = NO +# By default doxygen will write a font called FreeSans.ttf to the output +# directory and reference it in all dot files that doxygen generates. This +# font does not include all possible unicode characters however, so when you need +# these (or just want a differently looking font) you can specify the font name +# using DOT_FONTNAME. You need need to make sure dot is able to find the font, +# which can be done by putting it in a standard location or by setting the +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +# containing the font. + +DOT_FONTNAME = FreeSans + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the output directory to look for the +# FreeSans.ttf font (which doxygen will put there itself). If you specify a +# different font using DOT_FONTNAME you can set the path where dot +# can find it using this tag. + +DOT_FONTPATH = + # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # will generate a graph for each documented class showing the direct and # indirect inheritance relations. Setting this tag to YES will force the @@ -1207,19 +1416,19 @@ INCLUDED_BY_GRAPH = YES -# If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will -# generate a call dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. - -CALL_GRAPH = YES - -# If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will -# generate a caller dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. CALLER_GRAPH = NO @@ -1230,13 +1439,13 @@ # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include +# in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. DIRECTORY_GRAPH = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif +# generated by dot. Possible values are png, jpg, or gif # If left blank png will be used. DOT_IMAGE_FORMAT = png @@ -1252,12 +1461,12 @@ DOTFILE_DIRS = -# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of # nodes that will be shown in the graph. If the number of nodes in a graph # becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the number -# of direct children of the root node in a graph is already larger than -# MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. DOT_GRAPH_MAX_NODES = 50 @@ -1270,13 +1479,13 @@ # code bases. Also note that the size of a graph can be further restricted by # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. -MAX_DOT_GRAPH_DEPTH = 0 +MAX_DOT_GRAPH_DEPTH = 1000 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, which results in a white background. -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). DOT_TRANSPARENT = NO @@ -1300,7 +1509,7 @@ DOT_CLEANUP = YES #--------------------------------------------------------------------------- -# Configuration::additions related to the search engine +# Options related to the search engine #--------------------------------------------------------------------------- # The SEARCHENGINE tag specifies whether or not a search engine should be

15 years, 11 months

[tkreuzer] 38478: fix HeapAlloc prototype

by tkreuzer＠svn.reactos.org

Author: tkreuzer Date: Tue Dec 30 14:49:46 2008 New Revision: 38478 URL: http://svn.reactos.org/svn/reactos?rev=38478&view=rev Log: fix HeapAlloc prototype Modified: branches/ros-amd64-bringup/reactos/include/psdk/winbase.h Modified: branches/ros-amd64-bringup/reactos/include/psdk/winbase.h URL: http://svn.reactos.org/svn/reactos/branches/ros-amd64-bringup/reactos/inclu… ============================================================================== --- branches/ros-amd64-bringup/reactos/include/psdk/winbase.h [iso-8859-1] (original) +++ branches/ros-amd64-bringup/reactos/include/psdk/winbase.h [iso-8859-1] Tue Dec 30 14:49:46 2008 @@ -1659,7 +1659,7 @@ BOOL WINAPI GlobalUnWire(HGLOBAL); /* Obsolete: Has no effect. */ PVOID WINAPI GlobalWire(HGLOBAL); /* Obsolete: Has no effect. */ #define HasOverlappedIoCompleted(lpOverlapped) ((lpOverlapped)->Internal != STATUS_PENDING) -PVOID WINAPI HeapAlloc(HANDLE,DWORD,DWORD); +PVOID WINAPI HeapAlloc(HANDLE,DWORD,SIZE_T); SIZE_T WINAPI HeapCompact(HANDLE,DWORD); HANDLE WINAPI HeapCreate(DWORD,DWORD,DWORD); BOOL WINAPI HeapDestroy(HANDLE);

15 years, 11 months

[tkreuzer] 38477: comment out atexit

by tkreuzer＠svn.reactos.org

Author: tkreuzer Date: Tue Dec 30 14:48:35 2008 New Revision: 38477 URL: http://svn.reactos.org/svn/reactos?rev=38477&view=rev Log: comment out atexit Modified: branches/ros-amd64-bringup/reactos/lib/3rdparty/mingw/atonexit.c Modified: branches/ros-amd64-bringup/reactos/lib/3rdparty/mingw/atonexit.c URL: http://svn.reactos.org/svn/reactos/branches/ros-amd64-bringup/reactos/lib/3… ============================================================================== --- branches/ros-amd64-bringup/reactos/lib/3rdparty/mingw/atonexit.c [iso-8859-1] (original) +++ branches/ros-amd64-bringup/reactos/lib/3rdparty/mingw/atonexit.c [iso-8859-1] Tue Dec 30 14:48:35 2008 @@ -20,6 +20,7 @@ extern _CRTIMP _onexit_t __dllonexit (_onexit_t, _PVFV**, _PVFV**); extern _onexit_t (__cdecl *_imp___onexit) (_onexit_t func); +#if 0 /* Choose a different name to prevent name conflicts. The CRT one works fine. */ _onexit_t __cdecl mingw_onexit(_onexit_t func) { @@ -48,3 +49,4 @@ { return (mingw_onexit((_onexit_t)func) == NULL) ? -1 : 0; } +#endif

15 years, 11 months

[hyperion] 38476: modified include/reactos/libs/pseh/pseh2.h Did you know gcc doesn't let PSEH deter it from inlining a function? Allocate the frame with __builtin_alloca so that this doesn't cause issues

by hyperion＠svn.reactos.org

Author: hyperion Date: Tue Dec 30 14:02:03 2008 New Revision: 38476 URL: http://svn.reactos.org/svn/reactos?rev=38476&view=rev Log: modified include/reactos/libs/pseh/pseh2.h Did you know gcc doesn't let PSEH deter it from inlining a function? Allocate the frame with __builtin_alloca so that this doesn't cause issues Modified: trunk/reactos/include/reactos/libs/pseh/pseh2.h Modified: trunk/reactos/include/reactos/libs/pseh/pseh2.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/include/reactos/libs/pseh/… ============================================================================== --- trunk/reactos/include/reactos/libs/pseh/pseh2.h [iso-8859-1] (original) +++ trunk/reactos/include/reactos/libs/pseh/pseh2.h [iso-8859-1] Tue Dec 30 14:02:03 2008 @@ -135,9 +135,6 @@ #define ___SEH_STRINGIFY(X_) # X_ #define __SEH_STRINGIFY(X_) ___SEH_STRINGIFY(X_) -#define __SEH_FORCE_NEST \ - __asm__ __volatile__("#%0" : : "r" (&_SEHFrame)) - #define __SEH_EXCEPT_RET long #define __SEH_EXCEPT_ARGS __attribute__((unused)) _SEH2Frame_t * _SEH2FrameP, __attribute__((unused)) struct _EXCEPTION_POINTERS * _SEHExceptionInformation #define __SEH_EXCEPT_ARGS_ , __SEH_EXCEPT_ARGS @@ -202,14 +199,16 @@ __label__ _SEHDoTry; \ __label__ _SEHAfterTry; \ static const int _SEH2ScopeKind = 0; \ - _SEH2Frame_t _SEHFrame; \ volatile _SEH2TryLevel_t _SEHTryLevel; \ - _SEH2Frame_t * const _SEH2FrameP = _SEHTopTryLevel ? &_SEHFrame : _SEHCurFrameP; \ + void * _SEHStackPointer; \ volatile _SEH2TryLevel_t * const _SEH2TryLevelP = &_SEHTryLevel; \ + _SEH2Frame_t * const _SEH2FrameP = _SEHTopTryLevel ? \ + ({ __asm__ __volatile__("mov %%esp, %0" : "=g" (_SEHStackPointer)); __builtin_alloca(sizeof(_SEH2Frame_t)); }) : \ + _SEHCurFrameP; \ \ (void)_SEH2ScopeKind; \ - (void)_SEHFrame; \ (void)_SEHTryLevel; \ + (void)_SEHStackPointer; \ (void)_SEH2FrameP; \ (void)_SEH2TryLevelP; \ \ @@ -220,7 +219,7 @@ __SEH_ENTER_TRYLEVEL(); \ \ if(_SEHTopTryLevel) \ - _SEH2EnterFrame(&_SEHFrame); \ + _SEH2EnterFrame(_SEH2FrameP); \ #define __SEH_END_SCOPE \ } \ @@ -346,7 +345,10 @@ \ _SEHAfterTry:; \ if(_SEHTopTryLevel) \ + { \ _SEH2LeaveFrame(); \ + __asm__ __volatile__("mov %0, %%esp" : : "g" (_SEHStackPointer)); \ + } \ else \ { \ __SEH_LEAVE_TRYLEVEL(); \

15 years, 11 months

[cwittich] 38475: fix some more security winetests

by cwittich＠svn.reactos.org

Author: cwittich Date: Tue Dec 30 11:10:40 2008 New Revision: 38475 URL: http://svn.reactos.org/svn/reactos?rev=38475&view=rev Log: fix some more security winetests Modified: trunk/reactos/dll/win32/advapi32/sec/misc.c Modified: trunk/reactos/dll/win32/advapi32/sec/misc.c URL: http://svn.reactos.org/svn/reactos/trunk/reactos/dll/win32/advapi32/sec/mis… ============================================================================== --- trunk/reactos/dll/win32/advapi32/sec/misc.c [iso-8859-1] (original) +++ trunk/reactos/dll/win32/advapi32/sec/misc.c [iso-8859-1] Tue Dec 30 11:10:40 2008 @@ -1461,6 +1461,12 @@ }; unsigned Priv; + if (!ADVAPI_IsLocalComputer(SystemName)) + { + SetLastError(RPC_S_SERVER_UNAVAILABLE); + return FALSE; + } + if (NULL != SystemName && L'\0' != *SystemName) { FIXME("LookupPrivilegeValueW: not implemented for remote system\n"); @@ -1601,6 +1607,7 @@ SetLastError(RPC_S_SERVER_UNAVAILABLE); return FALSE; } + if (lpLuid->HighPart || (lpLuid->LowPart < SE_MIN_WELL_KNOWN_PRIVILEGE || lpLuid->LowPart > SE_MAX_WELL_KNOWN_PRIVILEGE)) {

15 years, 12 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Ros-diffs December 2008