6 Apr
2013
6 Apr
'13
7:56 p.m.
Author: zguo
Date: Sat Apr 6 19:56:09 2013
New Revision: 58695
URL: http://svn.reactos.org/svn/reactos?rev=58695&view=rev
Log:
Merge in 58534, 58627, and 58628 from trunk. After this, the 0.3.15 code is frozen.
Modified:
branches/ReactOS-0.3.15/ (props changed)
branches/ReactOS-0.3.15/base/system/services/database.c
branches/ReactOS-0.3.15/base/system/services/rpcserver.c
branches/ReactOS-0.3.15/base/system/services/services.c
branches/ReactOS-0.3.15/base/system/services/services.h
branches/ReactOS-0.3.15/drivers/usb/usbehci/ (props changed)
branches/ReactOS-0.3.15/drivers/usb/usbehci/hardware.cpp
branches/ReactOS-0.3.15/drivers/usb/usbohci/ (props changed)
branches/ReactOS-0.3.15/drivers/usb/usbohci/hardware.cpp
branches/ReactOS-0.3.15/drivers/usb/usbuhci/hardware.cpp
branches/ReactOS-0.3.15/lib/drivers/libusb/common_interfaces.h (contents, props
changed)
branches/ReactOS-0.3.15/lib/drivers/libusb/hcd_controller.cpp (contents, props
changed)
branches/ReactOS-0.3.15/lib/drivers/libusb/hub_controller.cpp (contents, props
changed)
branches/ReactOS-0.3.15/lib/drivers/libusb/usb_device.cpp (contents, props changed)
Propchange: branches/ReactOS-0.3.15/
------------------------------------------------------------------------------
--- svn:mergeinfo (original)
+++ svn:mergeinfo Sat Apr 6 19:56:09 2013
@@ -13,4 +13,4 @@
/branches/usb-bringup:51335,51337,51341-51343,51348,51350,51353,51355,51365-51369,51372,51384-54388,54396-54398,54736-54737,54752-54754,54756-54760,54762,54764-54765,54767-54768,54772,54774-54777,54781,54787,54790-54792,54797-54798,54806,54808,54834-54838,54843,54850,54852,54856,54858-54859
/branches/usb-bringup-trunk:55019-55543,55548-55554,55556-55567
/branches/wlan-bringup:54809-54998
-/trunk/reactos:58553,58561,58614
+/trunk/reactos:58534,58553,58561,58614,58627-58628
Modified: branches/ReactOS-0.3.15/base/system/services/database.c
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/base/system/serv…
==============================================================================
--- branches/ReactOS-0.3.15/base/system/services/database.c [iso-8859-1] (original)
+++ branches/ReactOS-0.3.15/base/system/services/database.c [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -19,9 +19,9 @@
/*
* Uncomment the line below to start services
- * using the SERVICE_START_PENDING state
+ * using the SERVICE_START_PENDING state.
*/
-// #define USE_SERVICE_START_PENDING
+#define USE_SERVICE_START_PENDING
/*
* Uncomment the line below to use asynchronous IO operations
@@ -38,6 +38,7 @@
static RTL_RESOURCE DatabaseLock;
static DWORD ResumeCount = 1;
+/* The critical section synchronizes service controls commands */
static CRITICAL_SECTION ControlServiceCriticalSection;
static DWORD PipeTimeout = 30000; /* 30 Seconds */
@@ -359,7 +360,7 @@
DWORD
ScmCreateNewServiceRecord(LPCWSTR lpServiceName,
- PSERVICE *lpServiceRecord)
+ PSERVICE* lpServiceRecord)
{
PSERVICE lpService = NULL;
@@ -772,13 +773,11 @@
if (Service->Status.dwServiceType == SERVICE_KERNEL_DRIVER)
{
- RtlInitUnicodeString(&DirName,
- L"\\Driver");
- }
- else
- {
- RtlInitUnicodeString(&DirName,
- L"\\FileSystem");
+ RtlInitUnicodeString(&DirName, L"\\Driver");
+ }
+ else // if (Service->Status.dwServiceType == SERVICE_FILE_SYSTEM_DRIVER)
+ {
+ RtlInitUnicodeString(&DirName, L"\\FileSystem");
}
InitializeObjectAttributes(&ObjectAttributes,
@@ -796,7 +795,7 @@
}
BufferLength = sizeof(OBJECT_DIRECTORY_INFORMATION) +
- 2 * MAX_PATH * sizeof(WCHAR);
+ 2 * MAX_PATH * sizeof(WCHAR);
DirInfo = HeapAlloc(GetProcessHeap(),
HEAP_ZERO_MEMORY,
BufferLength);
@@ -1096,7 +1095,7 @@
static DWORD
ScmSendStartCommand(PSERVICE Service,
DWORD argc,
- LPWSTR *argv)
+ LPWSTR* argv)
{
PSCM_CONTROL_PACKET ControlPacket;
SCM_REPLY_PACKET ReplyPacket;
@@ -1496,7 +1495,7 @@
static DWORD
ScmStartUserModeService(PSERVICE Service,
DWORD argc,
- LPWSTR *argv)
+ LPWSTR* argv)
{
PROCESS_INFORMATION ProcessInformation;
STARTUPINFOW StartupInfo;
@@ -1512,6 +1511,7 @@
return ScmSendStartCommand(Service, argc, argv);
}
+ /* Otherwise start its process */
ZeroMemory(&StartupInfo, sizeof(StartupInfo));
StartupInfo.cb = sizeof(StartupInfo);
ZeroMemory(&ProcessInformation, sizeof(ProcessInformation));
@@ -1551,9 +1551,7 @@
if (dwError == ERROR_SUCCESS)
{
/* Send start command */
- dwError = ScmSendStartCommand(Service,
- argc,
- argv);
+ dwError = ScmSendStartCommand(Service, argc, argv);
}
else
{
@@ -1569,24 +1567,22 @@
}
-DWORD
-ScmStartService(PSERVICE Service, DWORD argc, LPWSTR *argv)
+static DWORD
+ScmLoadService(PSERVICE Service,
+ DWORD argc,
+ LPWSTR* argv)
{
PSERVICE_GROUP Group = Service->lpGroup;
DWORD dwError = ERROR_SUCCESS;
LPCWSTR ErrorLogStrings[2];
WCHAR szErrorBuffer[32];
- DPRINT("ScmStartService() called\n");
-
+ DPRINT("ScmLoadService() called\n");
DPRINT("Start Service %p (%S)\n", Service, Service->lpServiceName);
- EnterCriticalSection(&ControlServiceCriticalSection);
-
if (Service->Status.dwCurrentState != SERVICE_STOPPED)
{
DPRINT("Service %S is already running!\n", Service->lpServiceName);
- LeaveCriticalSection(&ControlServiceCriticalSection);
return ERROR_SERVICE_ALREADY_RUNNING;
}
@@ -1602,7 +1598,7 @@
Service->Status.dwCurrentState = SERVICE_RUNNING;
}
}
- else
+ else // if (Service->Status.dwServiceType & (SERVICE_WIN32 |
SERVICE_INTERACTIVE_PROCESS))
{
/* Start user-mode service */
dwError = ScmCreateOrReferenceServiceImage(Service);
@@ -1625,9 +1621,7 @@
}
}
- LeaveCriticalSection(&ControlServiceCriticalSection);
-
- DPRINT("ScmStartService() done (Error %lu)\n", dwError);
+ DPRINT("ScmLoadService() done (Error %lu)\n", dwError);
if (dwError == ERROR_SUCCESS)
{
@@ -1677,17 +1671,80 @@
}
+DWORD
+ScmStartService(PSERVICE Service,
+ DWORD argc,
+ LPWSTR* argv)
+{
+ DWORD dwError = ERROR_SUCCESS;
+ SC_RPC_LOCK Lock = NULL;
+
+ DPRINT("ScmStartService() called\n");
+ DPRINT("Start Service %p (%S)\n", Service, Service->lpServiceName);
+
+ /* Acquire the service control critical section, to synchronize starts */
+ EnterCriticalSection(&ControlServiceCriticalSection);
+
+ /*
+ * Acquire the user service start lock while the service is starting, if
+ * needed (i.e. if we are not starting it during the initialization phase).
+ * If we don't success, bail out.
+ */
+ if (!ScmInitialize)
+ {
+ dwError = ScmAcquireServiceStartLock(TRUE, &Lock);
+ if (dwError != ERROR_SUCCESS) goto done;
+ }
+
+ /* Really start the service */
+ dwError = ScmLoadService(Service, argc, argv);
+
+ /* Release the service start lock, if needed, and the critical section */
+ if (Lock) ScmReleaseServiceStartLock(&Lock);
+
+done:
+ LeaveCriticalSection(&ControlServiceCriticalSection);
+
+ DPRINT("ScmStartService() done (Error %lu)\n", dwError);
+
+ return dwError;
+}
+
+
VOID
ScmAutoStartServices(VOID)
{
+ DWORD dwError = ERROR_SUCCESS;
+ SC_RPC_LOCK Lock = NULL;
+
PLIST_ENTRY GroupEntry;
PLIST_ENTRY ServiceEntry;
PSERVICE_GROUP CurrentGroup;
PSERVICE CurrentService;
WCHAR szSafeBootServicePath[MAX_PATH];
- DWORD dwError;
HKEY hKey;
ULONG i;
+
+ /* Acquire the service control critical section, to synchronize starts */
+ EnterCriticalSection(&ControlServiceCriticalSection);
+
+ /*
+ * Acquire the user service start lock while the service is starting, if
+ * needed (i.e. if we are not starting it during the initialization phase).
+ * If we don't success, bail out.
+ */
+ if (!ScmInitialize)
+ {
+ /*
+ * Actually this code is never executed since we are called
+ * at initialization time, so that ScmInitialize == TRUE.
+ * But keep the code here if someday we are called later on
+ * for whatever reason...
+ */
+ dwError = ScmAcquireServiceStartLock(TRUE, &Lock);
+ if (dwError != ERROR_SUCCESS) goto done;
+ }
+
/* Clear 'ServiceVisited' flag (or set if not to start in Safe Mode) */
ServiceEntry = ServiceListHead.Flink;
@@ -1779,7 +1836,7 @@
(CurrentService->dwTag == CurrentGroup->TagArray[i]))
{
CurrentService->ServiceVisited = TRUE;
- ScmStartService(CurrentService, 0, NULL);
+ ScmLoadService(CurrentService, 0, NULL);
}
ServiceEntry = ServiceEntry->Flink;
@@ -1797,7 +1854,7 @@
(CurrentService->ServiceVisited == FALSE))
{
CurrentService->ServiceVisited = TRUE;
- ScmStartService(CurrentService, 0, NULL);
+ ScmLoadService(CurrentService, 0, NULL);
}
ServiceEntry = ServiceEntry->Flink;
@@ -1817,7 +1874,7 @@
(CurrentService->ServiceVisited == FALSE))
{
CurrentService->ServiceVisited = TRUE;
- ScmStartService(CurrentService, 0, NULL);
+ ScmLoadService(CurrentService, 0, NULL);
}
ServiceEntry = ServiceEntry->Flink;
@@ -1834,7 +1891,7 @@
(CurrentService->ServiceVisited == FALSE))
{
CurrentService->ServiceVisited = TRUE;
- ScmStartService(CurrentService, 0, NULL);
+ ScmLoadService(CurrentService, 0, NULL);
}
ServiceEntry = ServiceEntry->Flink;
@@ -1848,6 +1905,13 @@
CurrentService->ServiceVisited = FALSE;
ServiceEntry = ServiceEntry->Flink;
}
+
+
+ /* Release the service start lock, if needed, and the critical section */
+ if (Lock) ScmReleaseServiceStartLock(&Lock);
+
+done:
+ LeaveCriticalSection(&ControlServiceCriticalSection);
}
Modified: branches/ReactOS-0.3.15/base/system/services/rpcserver.c
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/base/system/serv…
==============================================================================
--- branches/ReactOS-0.3.15/base/system/services/rpcserver.c [iso-8859-1] (original)
+++ branches/ReactOS-0.3.15/base/system/services/rpcserver.c [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -2895,7 +2895,6 @@
DWORD dwError = ERROR_SUCCESS;
PSERVICE_HANDLE hSvc;
PSERVICE lpService = NULL;
- SC_RPC_LOCK Lock = NULL;
#ifndef NDEBUG
DWORD i;
@@ -2941,16 +2940,8 @@
if (lpService->bDeleted)
return ERROR_SERVICE_MARKED_FOR_DELETE;
- /* Acquire the service start lock until the service has been started */
- dwError = ScmAcquireServiceStartLock(TRUE, &Lock);
- if (dwError != ERROR_SUCCESS)
- return dwError;
-
/* Start the service */
dwError = ScmStartService(lpService, argc, (LPWSTR*)argv);
-
- /* Release the service start lock */
- ScmReleaseServiceStartLock(&Lock);
return dwError;
}
@@ -4171,7 +4162,6 @@
DWORD dwError = ERROR_SUCCESS;
PSERVICE_HANDLE hSvc;
PSERVICE lpService = NULL;
- SC_RPC_LOCK Lock = NULL;
LPWSTR *lpVector = NULL;
DWORD i;
DWORD dwLength;
@@ -4244,16 +4234,8 @@
}
}
- /* Acquire the service start lock until the service has been started */
- dwError = ScmAcquireServiceStartLock(TRUE, &Lock);
- if (dwError != ERROR_SUCCESS)
- goto done;
-
/* Start the service */
dwError = ScmStartService(lpService, argc, lpVector);
-
- /* Release the service start lock */
- ScmReleaseServiceStartLock(&Lock);
done:
/* Free the Unicode argument vector */
Modified: branches/ReactOS-0.3.15/base/system/services/services.c
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/base/system/serv…
==============================================================================
--- branches/ReactOS-0.3.15/base/system/services/services.c [iso-8859-1] (original)
+++ branches/ReactOS-0.3.15/base/system/services/services.c [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -22,6 +22,12 @@
#define PIPE_BUFSIZE 1024
#define PIPE_TIMEOUT 1000
+/* Defined in include/reactos/services/services.h */
+// #define SCM_START_EVENT L"SvcctrlStartEvent_A3752DX"
+#define SCM_AUTOSTARTCOMPLETE_EVENT L"SC_AutoStartComplete"
+#define LSA_RPC_SERVER_ACTIVE L"LSA_RPC_SERVER_ACTIVE"
+
+BOOL ScmInitialize = FALSE;
BOOL ScmShutdown = FALSE;
static HANDLE hScmShutdownEvent = NULL;
@@ -77,35 +83,38 @@
BOOL
-ScmCreateStartEvent(PHANDLE StartEvent)
-{
+ScmCreateControlEvent(PHANDLE Event,
+ LPCWSTR Name,
+ DWORD dwDesiredAccess)
+{
+ /*
+ * This function creates a generic non-inheritable event
+ * and return a handle to the caller. The caller must
+ * close this handle afterwards.
+ */
+
HANDLE hEvent;
- hEvent = CreateEventW(NULL,
- TRUE,
- FALSE,
- L"SvcctrlStartEvent_A3752DX");
+ hEvent = CreateEventW(NULL, TRUE, FALSE, Name);
if (hEvent == NULL)
{
if (GetLastError() == ERROR_ALREADY_EXISTS)
{
- hEvent = OpenEventW(EVENT_ALL_ACCESS,
- FALSE,
- L"SvcctrlStartEvent_A3752DX");
- if (hEvent == NULL)
- {
- return FALSE;
- }
+ hEvent = OpenEventW(dwDesiredAccess, FALSE, Name);
}
- else
- {
- return FALSE;
- }
- }
-
- *StartEvent = hEvent;
-
- return TRUE;
+ }
+
+ if (hEvent)
+ {
+ DPRINT("SERVICES: Created event %S with handle %x\n", Name, hEvent);
+ *Event = hEvent;
+ return TRUE;
+ }
+ else
+ {
+ DPRINT1("SERVICES: Failed to create event %S (Error %lu)\n", Name,
GetLastError());
+ return FALSE;
+ }
}
@@ -113,35 +122,21 @@
ScmWaitForLsa(VOID)
{
HANDLE hEvent;
- DWORD dwError;
-
- hEvent = CreateEventW(NULL,
- TRUE,
- FALSE,
- L"LSA_RPC_SERVER_ACTIVE");
- if (hEvent == NULL)
- {
- dwError = GetLastError();
- DPRINT1("Failed to create the notication event (Error %lu)\n",
dwError);
-
- if (dwError == ERROR_ALREADY_EXISTS)
- {
- hEvent = OpenEventW(SYNCHRONIZE,
- FALSE,
- L"LSA_RPC_SERVER_ACTIVE");
- if (hEvent == NULL)
- {
- DPRINT1("Could not open the notification event (Error %lu)\n",
GetLastError());
- return;
- }
- }
- }
-
- DPRINT("Wait for the LSA server!\n");
- WaitForSingleObject(hEvent, INFINITE);
- DPRINT("LSA server running!\n");
-
- CloseHandle(hEvent);
+
+ if (!ScmCreateControlEvent(&hEvent,
+ LSA_RPC_SERVER_ACTIVE,
+ SYNCHRONIZE))
+ {
+ DPRINT1("Failed to create the notification event (Error %lu)\n",
GetLastError());
+ }
+ else
+ {
+ DPRINT("Wait for the LSA server!\n");
+ WaitForSingleObject(hEvent, INFINITE);
+ DPRINT("LSA server running!\n");
+
+ CloseHandle(hEvent);
+ }
DPRINT("ScmWaitForLsa() done\n");
}
@@ -351,23 +346,38 @@
int nShowCmd)
{
HANDLE hScmStartEvent = NULL;
+ HANDLE hScmAutoStartCompleteEvent = NULL;
SC_RPC_LOCK Lock = NULL;
BOOL bCanDeleteNamedPipeCriticalSection = FALSE;
DWORD dwError;
DPRINT("SERVICES: Service Control Manager\n");
- /* Create start event */
- if (!ScmCreateStartEvent(&hScmStartEvent))
- {
- DPRINT1("SERVICES: Failed to create start event\n");
- goto done;
- }
-
- DPRINT("SERVICES: created start event with handle %p.\n", hScmStartEvent);
+ /* We are initializing ourselves */
+ ScmInitialize = TRUE;
+
+ /* Create the start event */
+ if (!ScmCreateControlEvent(&hScmStartEvent,
+ SCM_START_EVENT,
+ EVENT_ALL_ACCESS))
+ {
+ DPRINT1("SERVICES: Failed to create the start event\n");
+ goto done;
+ }
+ DPRINT("SERVICES: Created start event with handle %p.\n", hScmStartEvent);
+
+ /* Create the auto-start complete event */
+ if (!ScmCreateControlEvent(&hScmAutoStartCompleteEvent,
+ SCM_AUTOSTARTCOMPLETE_EVENT,
+ EVENT_ALL_ACCESS))
+ {
+ DPRINT1("SERVICES: Failed to create the auto-start complete event\n");
+ goto done;
+ }
+ DPRINT("SERVICES: created auto-start complete event with handle %p.\n",
hScmAutoStartCompleteEvent);
/* Create the shutdown event */
- hScmShutdownEvent = CreateEvent(NULL, TRUE, FALSE, NULL);
+ hScmShutdownEvent = CreateEventW(NULL, TRUE, FALSE, NULL);
if (hScmShutdownEvent == NULL)
{
DPRINT1("SERVICES: Failed to create shutdown event\n");
@@ -385,7 +395,7 @@
/* Read the control set values */
if (!ScmGetControlSetValues())
{
- DPRINT1("SERVICES: failed to read the control set values\n");
+ DPRINT1("SERVICES: Failed to read the control set values\n");
goto done;
}
@@ -393,49 +403,58 @@
dwError = ScmCreateServiceDatabase();
if (dwError != ERROR_SUCCESS)
{
- DPRINT1("SERVICES: failed to create SCM database (Error %lu)\n",
dwError);
- goto done;
- }
+ DPRINT1("SERVICES: Failed to create SCM database (Error %lu)\n",
dwError);
+ goto done;
+ }
+
+ /* Wait for the LSA server */
+ ScmWaitForLsa();
/* Update the services database */
ScmGetBootAndSystemDriverState();
- /* Register the Service Control Manager process with CSRSS */
+ /* Register the Service Control Manager process with the ReactOS Subsystem */
if (!RegisterServicesProcess(GetCurrentProcessId()))
{
DPRINT1("SERVICES: Could not register SCM process\n");
goto done;
}
- /* Acquire the service start lock until autostart services have been started */
+ /*
+ * Acquire the user service start lock until
+ * auto-start services have been started.
+ */
dwError = ScmAcquireServiceStartLock(TRUE, &Lock);
if (dwError != ERROR_SUCCESS)
{
- DPRINT1("SERVICES: failed to acquire the service start lock (Error
%lu)\n", dwError);
+ DPRINT1("SERVICES: Failed to acquire the service start lock (Error
%lu)\n", dwError);
goto done;
}
/* Start the RPC server */
ScmStartRpcServer();
- DPRINT("SERVICES: Initialized.\n");
-
/* Signal start event */
SetEvent(hScmStartEvent);
+ DPRINT("SERVICES: Initialized.\n");
+
/* Register event handler (used for system shutdown) */
SetConsoleCtrlHandler(ShutdownHandlerRoutine, TRUE);
- /* Wait for the LSA server */
- ScmWaitForLsa();
-
/* Start auto-start services */
ScmAutoStartServices();
+ /* Signal auto-start complete event */
+ SetEvent(hScmAutoStartCompleteEvent);
+
/* FIXME: more to do ? */
/* Release the service start lock */
ScmReleaseServiceStartLock(&Lock);
+
+ /* Initialization finished */
+ ScmInitialize = FALSE;
DPRINT("SERVICES: Running.\n");
@@ -451,6 +470,10 @@
if (hScmShutdownEvent != NULL)
CloseHandle(hScmShutdownEvent);
+ /* Close the auto-start complete event */
+ if (hScmAutoStartCompleteEvent != NULL)
+ CloseHandle(hScmAutoStartCompleteEvent);
+
/* Close the start event */
if (hScmStartEvent != NULL)
CloseHandle(hScmStartEvent);
@@ -458,7 +481,6 @@
DPRINT("SERVICES: Finished.\n");
ExitThread(0);
-
return 0;
}
Modified: branches/ReactOS-0.3.15/base/system/services/services.h
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/base/system/serv…
==============================================================================
--- branches/ReactOS-0.3.15/base/system/services/services.h [iso-8859-1] (original)
+++ branches/ReactOS-0.3.15/base/system/services/services.h [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -86,6 +86,7 @@
extern LIST_ENTRY ServiceListHead;
extern LIST_ENTRY GroupListHead;
extern LIST_ENTRY ImageListHead;
+extern BOOL ScmInitialize;
extern BOOL ScmShutdown;
Propchange: branches/ReactOS-0.3.15/drivers/usb/usbehci/
------------------------------------------------------------------------------
--- svn:mergeinfo (original)
+++ svn:mergeinfo Sat Apr 6 19:56:09 2013
@@ -27,3 +27,4 @@
/branches/usb-bringup-trunk/drivers/usb/usbehci:55524-55543,55548-55554,55556-55567
/branches/wlan-bringup/drivers/usb/usbehci:54809-54998
/branches/wlan-bringup/drivers/usb/usbehci_new:54809-54998
+/trunk/reactos/drivers/usb/usbehci:58627-58628
Modified: branches/ReactOS-0.3.15/drivers/usb/usbehci/hardware.cpp
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/drivers/usb/usbe…
==============================================================================
--- branches/ReactOS-0.3.15/drivers/usb/usbehci/hardware.cpp [iso-8859-1] (original)
+++ branches/ReactOS-0.3.15/drivers/usb/usbehci/hardware.cpp [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -127,11 +127,11 @@
return STATUS_UNSUCCESSFUL;
}
-LPCWSTR
+LPCSTR
STDMETHODCALLTYPE
CUSBHardwareDevice::GetUSBType()
{
- return L"USBEHCI";
+ return "USBEHCI";
}
NTSTATUS
Propchange: branches/ReactOS-0.3.15/drivers/usb/usbohci/
------------------------------------------------------------------------------
--- svn:mergeinfo (original)
+++ svn:mergeinfo Sat Apr 6 19:56:09 2013
@@ -19,3 +19,4 @@
/branches/usb-bringup-trunk/drivers/usb/usbohci:55019-55543,55548-55554
/branches/wlan-bringup/drivers/usb/usbohci:54809-54998
/trunk/reactos/drivers/usb/usbehci_new:48236-51323
+/trunk/reactos/drivers/usb/usbohci:58627-58628
Modified: branches/ReactOS-0.3.15/drivers/usb/usbohci/hardware.cpp
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/drivers/usb/usbo…
==============================================================================
--- branches/ReactOS-0.3.15/drivers/usb/usbohci/hardware.cpp [iso-8859-1] (original)
+++ branches/ReactOS-0.3.15/drivers/usb/usbohci/hardware.cpp [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -124,11 +124,11 @@
return STATUS_UNSUCCESSFUL;
}
-LPCWSTR
+LPCSTR
STDMETHODCALLTYPE
CUSBHardwareDevice::GetUSBType()
{
- return L"USBOHCI";
+ return "USBOHCI";
}
Modified: branches/ReactOS-0.3.15/drivers/usb/usbuhci/hardware.cpp
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/drivers/usb/usbu…
==============================================================================
--- branches/ReactOS-0.3.15/drivers/usb/usbuhci/hardware.cpp [iso-8859-1] (original)
+++ branches/ReactOS-0.3.15/drivers/usb/usbuhci/hardware.cpp [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -145,11 +145,11 @@
return STATUS_UNSUCCESSFUL;
}
-LPCWSTR
+LPCSTR
STDMETHODCALLTYPE
CUSBHardwareDevice::GetUSBType()
{
- return L"USBUHCI";
+ return "USBUHCI";
}
Modified: branches/ReactOS-0.3.15/lib/drivers/libusb/common_interfaces.h
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/lib/drivers/libu…
==============================================================================
--- branches/ReactOS-0.3.15/lib/drivers/libusb/common_interfaces.h [iso-8859-1]
(original)
+++ branches/ReactOS-0.3.15/lib/drivers/libusb/common_interfaces.h [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -184,7 +184,7 @@
IN PVOID CallBack, \
IN PVOID Context) PURE; \
\
- STDMETHOD_(LPCWSTR, GetUSBType)(THIS) PURE;
+ STDMETHOD_(LPCSTR, GetUSBType)(THIS) PURE;
#define IMP_IUSBHARDWAREDEVICE \
@@ -232,7 +232,7 @@
IN PVOID CallBack, \
IN PVOID Context); \
\
- STDMETHODIMP_(LPCWSTR) GetUSBType();
+ STDMETHODIMP_(LPCSTR) GetUSBType();
DECLARE_INTERFACE_(IUSBHardwareDevice, IUnknown)
{
Propchange: branches/ReactOS-0.3.15/lib/drivers/libusb/common_interfaces.h
------------------------------------------------------------------------------
--- svn:mergeinfo (original)
+++ svn:mergeinfo Sat Apr 6 19:56:09 2013
@@ -27,3 +27,4 @@
/branches/usb-bringup-trunk/drivers/usb/usbehci/interfaces.h:55524-55543,55548-55554,55556-55567
/branches/wlan-bringup/drivers/usb/usbehci/interfaces.h:54809-54998
/branches/wlan-bringup/drivers/usb/usbehci_new/interfaces.h:54809-54998
+/trunk/reactos/lib/drivers/libusb/common_interfaces.h:58627-58628
Modified: branches/ReactOS-0.3.15/lib/drivers/libusb/hcd_controller.cpp
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/lib/drivers/libu…
==============================================================================
--- branches/ReactOS-0.3.15/lib/drivers/libusb/hcd_controller.cpp [iso-8859-1] (original)
+++ branches/ReactOS-0.3.15/lib/drivers/libusb/hcd_controller.cpp [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -60,7 +60,7 @@
PUSBHARDWAREDEVICE m_Hardware;
PHUBCONTROLLER m_HubController;
ULONG m_FDODeviceNumber;
- LPCWSTR m_USBType;
+ LPCSTR m_USBType;
};
//=================================================================================================
@@ -138,7 +138,7 @@
Status = m_Hardware->Initialize(m_DriverObject, m_FunctionalDeviceObject,
m_PhysicalDeviceObject, m_NextDeviceObject);
if (!NT_SUCCESS(Status))
{
- DPRINT1("[%S] Failed to initialize hardware object %x\n",
m_Hardware->GetUSBType(), Status);
+ DPRINT1("[%s] Failed to initialize hardware object %x\n",
m_Hardware->GetUSBType(), Status);
//
// failed to initialize hardware object, detach from device stack
@@ -240,7 +240,7 @@
//
PC_ASSERT(DeviceExtension->IsFDO);
- DPRINT1("[%S] HandleDeviceControl>Type: IoCtl %x InputBufferLength %lu
OutputBufferLength %lu\n", m_USBType,
+ DPRINT1("[%s] HandleDeviceControl>Type: IoCtl %x InputBufferLength %lu
OutputBufferLength %lu\n", m_USBType,
IoStack->Parameters.DeviceIoControl.IoControlCode,
IoStack->Parameters.DeviceIoControl.InputBufferLength,
IoStack->Parameters.DeviceIoControl.OutputBufferLength);
@@ -285,7 +285,7 @@
//
// informal debug print
//
- DPRINT1("[%S] Result %S\n", m_USBType,
DriverKey->DriverKeyName);
+ DPRINT1("[%s] Result %S\n", m_USBType,
DriverKey->DriverKeyName);
}
}
@@ -337,7 +337,7 @@
PC_ASSERT(IoStack->Parameters.DeviceIoControl.OutputBufferLength -
sizeof(ULONG) - sizeof(WCHAR) >= ResultLength);
DriverKey->DriverKeyName[ResultLength / sizeof(WCHAR)] =
L'\0';
- DPRINT1("[%S] Result %S\n", m_USBType,
DriverKey->DriverKeyName);
+ DPRINT1("[%s] Result %S\n", m_USBType,
DriverKey->DriverKeyName);
}
//
@@ -400,7 +400,7 @@
{
case IRP_MN_START_DEVICE:
{
- DPRINT("[%S] HandlePnp IRP_MN_START FDO\n", m_USBType);
+ DPRINT("[%s] HandlePnp IRP_MN_START FDO\n", m_USBType);
//
// first start lower device object
@@ -429,12 +429,12 @@
Status = SetSymbolicLink(TRUE);
}
- DPRINT("[%S] HandlePnp IRP_MN_START FDO: Status %x\n", m_USBType
,Status);
+ DPRINT("[%s] HandlePnp IRP_MN_START FDO: Status %x\n", m_USBType
,Status);
break;
}
case IRP_MN_QUERY_DEVICE_RELATIONS:
{
- DPRINT("[%S] HandlePnp IRP_MN_QUERY_DEVICE_RELATIONS Type %lx\n",
m_USBType, IoStack->Parameters.QueryDeviceRelations.Type);
+ DPRINT("[%s] HandlePnp IRP_MN_QUERY_DEVICE_RELATIONS Type %lx\n",
m_USBType, IoStack->Parameters.QueryDeviceRelations.Type);
if (m_HubController == NULL)
{
@@ -514,7 +514,7 @@
}
case IRP_MN_STOP_DEVICE:
{
- DPRINT("[%S] HandlePnp IRP_MN_STOP_DEVICE\n", m_USBType);
+ DPRINT("[%s] HandlePnp IRP_MN_STOP_DEVICE\n", m_USBType);
if (m_Hardware)
{
@@ -555,7 +555,7 @@
IoSkipCurrentIrpStackLocation(Irp);
return IoCallDriver(m_NextDeviceObject, Irp);
#else
- DPRINT1("[%S] Denying controller removal due to reinitialization
bugs\n", m_USBType);
+ DPRINT1("[%s] Denying controller removal due to reinitialization
bugs\n", m_USBType);
Irp->IoStatus.Status = STATUS_UNSUCCESSFUL;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return STATUS_UNSUCCESSFUL;
@@ -563,7 +563,7 @@
}
case IRP_MN_REMOVE_DEVICE:
{
- DPRINT("[%S] HandlePnp IRP_MN_REMOVE_DEVICE FDO\n", m_USBType);
+ DPRINT("[%s] HandlePnp IRP_MN_REMOVE_DEVICE FDO\n", m_USBType);
//
// delete the symbolic link
@@ -676,7 +676,7 @@
//
if (!NT_SUCCESS(Status))
{
- DPRINT1("[%S] CreateFDO: Failed to create %wZ, Status %x\n",
m_USBType, &DeviceName, Status);
+ DPRINT1("[%s] CreateFDO: Failed to create %wZ, Status %x\n",
m_USBType, &DeviceName, Status);
return Status;
}
}
@@ -686,7 +686,7 @@
//
m_FDODeviceNumber = UsbDeviceNumber;
- DPRINT("[%S] CreateFDO: DeviceName %wZ\n", m_USBType, &DeviceName);
+ DPRINT("[%s] CreateFDO: DeviceName %wZ\n", m_USBType, &DeviceName);
/* done */
return Status;
Propchange: branches/ReactOS-0.3.15/lib/drivers/libusb/hcd_controller.cpp
------------------------------------------------------------------------------
--- svn:mergeinfo (original)
+++ svn:mergeinfo Sat Apr 6 19:56:09 2013
@@ -27,3 +27,4 @@
/branches/usb-bringup-trunk/drivers/usb/usbehci/hcd_controller.cpp:55524-55543,55548-55554,55556-55567
/branches/wlan-bringup/drivers/usb/usbehci/hcd_controller.cpp:54809-54998
/branches/wlan-bringup/drivers/usb/usbehci_new/hcd_controller.cpp:54809-54998
+/trunk/reactos/lib/drivers/libusb/hcd_controller.cpp:58627-58628
Modified: branches/ReactOS-0.3.15/lib/drivers/libusb/hub_controller.cpp
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/lib/drivers/libu…
==============================================================================
--- branches/ReactOS-0.3.15/lib/drivers/libusb/hub_controller.cpp [iso-8859-1] (original)
+++ branches/ReactOS-0.3.15/lib/drivers/libusb/hub_controller.cpp [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -105,7 +105,7 @@
PULONG m_DeviceAddressBitmapBuffer;
LIST_ENTRY m_UsbDeviceList;
PIRP m_PendingSCEIrp;
- LPCWSTR m_USBType;
+ LPCSTR m_USBType;
//Internal Functions
@@ -310,7 +310,7 @@
// Get the number of ports and check each one for device connected
//
m_Hardware->GetDeviceDetails(NULL, NULL, &PortCount, NULL);
- DPRINT1("[%S] SCE Request %p TransferBufferLength %lu Flags %x MDL %p\n",
m_USBType, Urb->UrbBulkOrInterruptTransfer.TransferBuffer,
Urb->UrbBulkOrInterruptTransfer.TransferBufferLength,
Urb->UrbBulkOrInterruptTransfer.TransferFlags,
Urb->UrbBulkOrInterruptTransfer.TransferBufferMDL);
+ DPRINT1("[%s] SCE Request %p TransferBufferLength %lu Flags %x MDL %p\n",
m_USBType, Urb->UrbBulkOrInterruptTransfer.TransferBuffer,
Urb->UrbBulkOrInterruptTransfer.TransferBufferLength,
Urb->UrbBulkOrInterruptTransfer.TransferFlags,
Urb->UrbBulkOrInterruptTransfer.TransferBufferMDL);
TransferBuffer = (PUCHAR)Urb->UrbBulkOrInterruptTransfer.TransferBuffer;
@@ -321,7 +321,7 @@
{
m_Hardware->GetPortStatus(PortId, &PortStatus, &PortChange);
- DPRINT1("[%S] Port %d: Status %x, Change %x\n", m_USBType, PortId,
PortStatus, PortChange);
+ DPRINT1("[%s] Port %d: Status %x, Change %x\n", m_USBType, PortId,
PortStatus, PortChange);
//
@@ -329,7 +329,7 @@
//
if (PortChange != 0)
{
- DPRINT1("[%S] Change state on port %d\n", m_USBType, PortId);
+ DPRINT1("[%s] Change state on port %d\n", m_USBType, PortId);
// Set the value for the port number
*TransferBuffer = 1 << ((PortId + 1) & 7);
Changed = TRUE;
@@ -432,7 +432,7 @@
{
case IRP_MN_START_DEVICE:
{
- DPRINT("[%S] HandlePnp IRP_MN_START_DEVICE\n", m_USBType);
+ DPRINT("[%s] HandlePnp IRP_MN_START_DEVICE\n", m_USBType);
//
// register device interface
//
@@ -450,7 +450,7 @@
}
case IRP_MN_QUERY_ID:
{
- DPRINT("[%S] HandlePnp IRP_MN_QUERY_ID Type %x\n", m_USBType,
IoStack->Parameters.QueryId.IdType);
+ DPRINT("[%s] HandlePnp IRP_MN_QUERY_ID Type %x\n", m_USBType,
IoStack->Parameters.QueryId.IdType);
if (IoStack->Parameters.QueryId.IdType == BusQueryDeviceID)
{
@@ -525,7 +525,7 @@
if (!NT_SUCCESS(Status))
{
- DPRINT1("[%S] HandlePnp> failed to get hardware id
%x\n", m_USBType, Status);
+ DPRINT1("[%s] HandlePnp> failed to get hardware id
%x\n", m_USBType, Status);
VendorID = 0x8086;
DeviceID = 0x3A37;
}
@@ -553,7 +553,7 @@
Index++;
- DPRINT1("[%S] Name %S\n", m_USBType, Buffer);
+ DPRINT1("[%s] Name %S\n", m_USBType, Buffer);
//
// allocate buffer
@@ -587,7 +587,7 @@
}
case IRP_MN_QUERY_CAPABILITIES:
{
- DPRINT("[%S] HandlePnp IRP_MN_QUERY_CAPABILITIES\n", m_USBType);
+ DPRINT("[%s] HandlePnp IRP_MN_QUERY_CAPABILITIES\n", m_USBType);
DeviceCapabilities =
(PDEVICE_CAPABILITIES)IoStack->Parameters.DeviceCapabilities.Capabilities;
@@ -619,7 +619,7 @@
}
case IRP_MN_QUERY_INTERFACE:
{
- DPRINT("[%S] HandlePnp IRP_MN_QUERY_INTERFACE\n", m_USBType);
+ DPRINT("[%s] HandlePnp IRP_MN_QUERY_INTERFACE\n", m_USBType);
//
// handle device interface requests
@@ -629,7 +629,7 @@
}
case IRP_MN_REMOVE_DEVICE:
{
- DPRINT("[%S] HandlePnp IRP_MN_REMOVE_DEVICE\n", m_USBType);
+ DPRINT("[%s] HandlePnp IRP_MN_REMOVE_DEVICE\n", m_USBType);
//
// deactivate device interface for BUS PDO
@@ -659,7 +659,7 @@
}
case IRP_MN_QUERY_DEVICE_RELATIONS:
{
- DPRINT("[%S] HandlePnp IRP_MN_QUERY_DEVICE_RELATIONS Type %x\n",
m_USBType, IoStack->Parameters.QueryDeviceRelations.Type);
+ DPRINT("[%s] HandlePnp IRP_MN_QUERY_DEVICE_RELATIONS Type %x\n",
m_USBType, IoStack->Parameters.QueryDeviceRelations.Type);
if (IoStack->Parameters.QueryDeviceRelations.Type ==
TargetDeviceRelation)
{
@@ -700,7 +700,7 @@
}
case IRP_MN_QUERY_BUS_INFORMATION:
{
- DPRINT("[%S] HandlePnp IRP_MN_QUERY_BUS_INFORMATION\n",
m_USBType);
+ DPRINT("[%s] HandlePnp IRP_MN_QUERY_BUS_INFORMATION\n",
m_USBType);
//
// allocate buffer for bus information
@@ -733,7 +733,7 @@
}
case IRP_MN_STOP_DEVICE:
{
- DPRINT("[%S] HandlePnp IRP_MN_STOP_DEVICE\n", m_USBType);
+ DPRINT("[%s] HandlePnp IRP_MN_STOP_DEVICE\n", m_USBType);
//
// stop device
//
@@ -742,7 +742,7 @@
}
case IRP_MN_SURPRISE_REMOVAL:
{
- DPRINT("[%S] HandlePnp IRP_MN_SURPRISE_REMOVAL\n", m_USBType);
+ DPRINT("[%s] HandlePnp IRP_MN_SURPRISE_REMOVAL\n", m_USBType);
Status = STATUS_SUCCESS;
break;
}
@@ -796,7 +796,7 @@
if (!EndPointDesc)
{
- DPRINT1("[%S] Error No EndpointDesc\n", m_USBType);
+ DPRINT1("[%s] Error No EndpointDesc\n", m_USBType);
Urb->UrbIsochronousTransfer.Hdr.Status = USBD_STATUS_INVALID_PIPE_HANDLE;
return STATUS_INVALID_PARAMETER;
}
@@ -805,7 +805,7 @@
// sanity checks
//
ASSERT(EndPointDesc);
- DPRINT("[%S] HandleIsochronousTransfer EndPointDesc %p Address %x bmAttributes
%x\n", m_USBType, EndPointDesc, EndPointDesc->bEndpointAddress,
EndPointDesc->bmAttributes);
+ DPRINT("[%s] HandleIsochronousTransfer EndPointDesc %p Address %x bmAttributes
%x\n", m_USBType, EndPointDesc, EndPointDesc->bEndpointAddress,
EndPointDesc->bmAttributes);
ASSERT((EndPointDesc->bmAttributes & USB_ENDPOINT_TYPE_MASK) ==
USB_ENDPOINT_TYPE_ISOCHRONOUS);
//
@@ -813,7 +813,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleIsochronousTransfer invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleIsochronousTransfer invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -856,7 +856,7 @@
//
// Else pend the IRP, to be completed when a device connects or disconnects.
//
- DPRINT("[%S] Pending SCE Irp\n", m_USBType);
+ DPRINT("[%s] Pending SCE Irp\n", m_USBType);
m_PendingSCEIrp = Irp;
IoMarkIrpPending(Irp);
return STATUS_PENDING;
@@ -878,7 +878,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleBulkOrInterruptTransfer invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleBulkOrInterruptTransfer invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -905,7 +905,7 @@
ULONG NumPort;
ULONG PortId;
- DPRINT("[%S] HandleClassOther> Request %x Value %x\n", m_USBType,
Urb->UrbControlVendorClassRequest.Request,
Urb->UrbControlVendorClassRequest.Value);
+ DPRINT("[%s] HandleClassOther> Request %x Value %x\n", m_USBType,
Urb->UrbControlVendorClassRequest.Request,
Urb->UrbControlVendorClassRequest.Value);
//
// get number of ports available
@@ -947,7 +947,7 @@
//
// request contains buffer of 2 ushort which are used from submitting
port status and port change status
//
- DPRINT("[%S] PortId %x PortStatus %x PortChange %x\n",
m_USBType, PortId, PortStatus, PortChange);
+ DPRINT("[%s] PortId %x PortStatus %x PortChange %x\n",
m_USBType, PortId, PortStatus, PortChange);
Buffer = (PUSHORT)Urb->UrbControlVendorClassRequest.TransferBuffer;
//
@@ -974,7 +974,7 @@
Status = m_Hardware->ClearPortStatus(PortId, C_PORT_RESET);
break;
default:
- DPRINT("[%S] Unknown Value for Clear Feature %x \n",
m_USBType, Urb->UrbControlVendorClassRequest.Value);
+ DPRINT("[%s] Unknown Value for Clear Feature %x \n",
m_USBType, Urb->UrbControlVendorClassRequest.Value);
break;
}
@@ -1023,13 +1023,13 @@
break;
}
default:
- DPRINT1("[%S] Unsupported request id %x\n", m_USBType,
Urb->UrbControlVendorClassRequest.Value);
+ DPRINT1("[%s] Unsupported request id %x\n", m_USBType,
Urb->UrbControlVendorClassRequest.Value);
PC_ASSERT(FALSE);
}
break;
}
default:
- DPRINT1("[%S] HandleClassOther Unknown request code %x\n",
m_USBType, Urb->UrbControlVendorClassRequest.Request);
+ DPRINT1("[%s] HandleClassOther Unknown request code %x\n",
m_USBType, Urb->UrbControlVendorClassRequest.Request);
PC_ASSERT(0);
Status = STATUS_INVALID_DEVICE_REQUEST;
}
@@ -1095,7 +1095,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleSelectConfiguration invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleSelectConfiguration invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1151,7 +1151,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleSelectInterface invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleSelectInterface invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1208,7 +1208,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleGetStatusFromDevice invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleGetStatusFromDevice invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1252,7 +1252,7 @@
//
Status = UsbDevice->SubmitSetupPacket(&CtrlSetup,
Urb->UrbControlDescriptorRequest.TransferBufferLength,
Urb->UrbControlDescriptorRequest.TransferBuffer);
ASSERT(Status == STATUS_SUCCESS);
- DPRINT1("[%S] HandleGetStatusFromDevice Status %x Length %lu DeviceStatus
%x\n", m_USBType, Status, Urb->UrbControlDescriptorRequest.TransferBufferLength,
*DeviceStatus);
+ DPRINT1("[%s] HandleGetStatusFromDevice Status %x Length %lu DeviceStatus
%x\n", m_USBType, Status, Urb->UrbControlDescriptorRequest.TransferBufferLength,
*DeviceStatus);
//
// done
@@ -1273,7 +1273,7 @@
PUSBDEVICE UsbDevice;
USB_DEFAULT_PIPE_SETUP_PACKET CtrlSetup;
- DPRINT("[%S] HandleClassDevice Request %x Class %x\n", m_USBType,
Urb->UrbControlVendorClassRequest.Request, Urb->UrbControlVendorClassRequest.Value
>> 8);
+ DPRINT("[%s] HandleClassDevice Request %x Class %x\n", m_USBType,
Urb->UrbControlVendorClassRequest.Request, Urb->UrbControlVendorClassRequest.Value
>> 8);
//
// check class request type
@@ -1287,7 +1287,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleClassDevice invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleClassDevice invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1371,7 +1371,7 @@
{
if
(!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleClassDevice invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleClassDevice invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
//
@@ -1387,7 +1387,7 @@
break;
}
default:
- DPRINT1("[%S] HandleClassDevice Class %x not implemented\n",
m_USBType, Urb->UrbControlVendorClassRequest.Value >> 8);
+ DPRINT1("[%s] HandleClassDevice Class %x not implemented\n",
m_USBType, Urb->UrbControlVendorClassRequest.Value >> 8);
break;
}
break;
@@ -1399,7 +1399,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleClassDevice invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleClassDevice invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1465,7 +1465,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleGetDescriptorFromInterface invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleGetDescriptorFromInterface invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1494,7 +1494,7 @@
Status = UsbDevice->SubmitSetupPacket(&CtrlSetup,
Urb->UrbControlDescriptorRequest.TransferBufferLength,
Urb->UrbControlDescriptorRequest.TransferBuffer);
if (!NT_SUCCESS(Status))
{
- DPRINT1("[%S] HandleGetDescriptorFromInterface failed with %x\n",
m_USBType, Status);
+ DPRINT1("[%s] HandleGetDescriptorFromInterface failed with %x\n",
m_USBType, Status);
}
//
@@ -1515,7 +1515,7 @@
PUSBDEVICE UsbDevice;
ULONG Length, BufferLength;
- DPRINT("[%S] HandleGetDescriptor Type %x\n", m_USBType,
Urb->UrbControlDescriptorRequest.DescriptorType);
+ DPRINT("[%s] HandleGetDescriptor Type %x\n", m_USBType,
Urb->UrbControlDescriptorRequest.DescriptorType);
//
// check descriptor type
@@ -1547,7 +1547,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleGetDescriptor invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleGetDescriptor invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1654,7 +1654,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] USB_CONFIGURATION_DESCRIPTOR_TYPE invalid device
handle %p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] USB_CONFIGURATION_DESCRIPTOR_TYPE invalid device
handle %p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1719,7 +1719,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] USB_STRING_DESCRIPTOR_TYPE invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] USB_STRING_DESCRIPTOR_TYPE invalid device handle
%p\n", m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1749,7 +1749,7 @@
break;
}
default:
- DPRINT1("[%S] CHubController::HandleGetDescriptor DescriptorType %x
unimplemented\n", m_USBType, Urb->UrbControlDescriptorRequest.DescriptorType);
+ DPRINT1("[%s] CHubController::HandleGetDescriptor DescriptorType %x
unimplemented\n", m_USBType, Urb->UrbControlDescriptorRequest.DescriptorType);
break;
}
@@ -1781,7 +1781,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleClassEndpoint invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleClassEndpoint invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1862,7 +1862,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleVendorDevice invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleVendorDevice invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1930,7 +1930,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleSyncResetAndClearStall invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleSyncResetAndClearStall invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -1947,7 +1947,7 @@
//
// failed
//
- DPRINT1("[%S] failed to reset pipe %x\n", m_USBType, Status);
+ DPRINT1("[%s] failed to reset pipe %x\n", m_USBType, Status);
}
@@ -1967,7 +1967,7 @@
//
Status = HandleClearStall(Irp, Urb);
}
- DPRINT1("[%S] URB_FUNCTION_SYNC_RESET_PIPE_AND_CLEAR_STALL Status %x\n",
m_USBType, Status);
+ DPRINT1("[%s] URB_FUNCTION_SYNC_RESET_PIPE_AND_CLEAR_STALL Status %x\n",
m_USBType, Status);
//
// reset data toggle
@@ -2003,7 +2003,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleAbortPipe invalid device handle %p\n", m_USBType,
Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleAbortPipe invalid device handle %p\n", m_USBType,
Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -2026,7 +2026,7 @@
// issue request
//
Status = UsbDevice->AbortPipe(EndpointDescriptor);
- DPRINT1("[%S] URB_FUNCTION_ABORT_PIPE Status %x\n", m_USBType, Status);
+ DPRINT1("[%s] URB_FUNCTION_ABORT_PIPE Status %x\n", m_USBType, Status);
//
// done
@@ -2059,7 +2059,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleClearStall invalid device handle %p\n", m_USBType,
Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleClearStall invalid device handle %p\n", m_USBType,
Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -2076,7 +2076,7 @@
// get device
//
UsbDevice = PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle);
- DPRINT1("[%S] URB_FUNCTION_SYNC_CLEAR_STALL\n", m_USBType);
+ DPRINT1("[%s] URB_FUNCTION_SYNC_CLEAR_STALL\n", m_USBType);
//
// initialize setup packet
@@ -2093,7 +2093,7 @@
//
Status = UsbDevice->SubmitSetupPacket(&CtrlSetup, 0, 0);
- DPRINT1("[%S] URB_FUNCTION_CLEAR_STALL Status %x\n", m_USBType, Status);
+ DPRINT1("[%s] URB_FUNCTION_CLEAR_STALL Status %x\n", m_USBType, Status);
//
// done
@@ -2124,7 +2124,7 @@
//
if (!ValidateUsbDevice(PUSBDEVICE(Urb->UrbHeader.UsbdDeviceHandle)))
{
- DPRINT1("[%S] HandleClassInterface invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
+ DPRINT1("[%s] HandleClassInterface invalid device handle %p\n",
m_USBType, Urb->UrbHeader.UsbdDeviceHandle);
//
// invalid device handle
@@ -2178,7 +2178,7 @@
//
// display error
//
- DPRINT1("[%S] URB_FUNCTION_CLASS_INTERFACE failed with Urb Status
%x\n", m_USBType, Urb->UrbHeader.Status);
+ DPRINT1("[%s] URB_FUNCTION_CLASS_INTERFACE failed with Urb Status
%x\n", m_USBType, Urb->UrbHeader.Status);
}
//
@@ -2272,7 +2272,7 @@
Status = HandleVendorDevice(Irp, Urb);
break;
default:
- DPRINT1("[%S] IOCTL_INTERNAL_USB_SUBMIT_URB Function %x NOT
IMPLEMENTED\n", m_USBType, Urb->UrbHeader.Function);
+ DPRINT1("[%s] IOCTL_INTERNAL_USB_SUBMIT_URB Function %x NOT
IMPLEMENTED\n", m_USBType, Urb->UrbHeader.Function);
break;
}
//
@@ -2282,7 +2282,7 @@
}
case IOCTL_INTERNAL_USB_GET_DEVICE_HANDLE:
{
- DPRINT("[%S] IOCTL_INTERNAL_USB_GET_DEVICE_HANDLE %p\n", m_USBType,
this);
+ DPRINT("[%s] IOCTL_INTERNAL_USB_GET_DEVICE_HANDLE %p\n", m_USBType,
this);
if (IoStack->Parameters.Others.Argument1)
{
@@ -2307,7 +2307,7 @@
}
case IOCTL_INTERNAL_USB_GET_ROOTHUB_PDO:
{
- DPRINT("[%S] IOCTL_INTERNAL_USB_GET_ROOTHUB_PDO\n", m_USBType);
+ DPRINT("[%s] IOCTL_INTERNAL_USB_GET_ROOTHUB_PDO\n", m_USBType);
//
// this is the first request send, it delivers the PDO to the caller
@@ -2336,7 +2336,7 @@
}
case IOCTL_INTERNAL_USB_GET_HUB_COUNT:
{
- DPRINT("[%S] IOCTL_INTERNAL_USB_GET_HUB_COUNT\n", m_USBType);
+ DPRINT("[%s] IOCTL_INTERNAL_USB_GET_HUB_COUNT\n", m_USBType);
//
// after IOCTL_INTERNAL_USB_GET_ROOTHUB_PDO is delivered, the usbhub driver
@@ -2359,13 +2359,13 @@
}
case IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION:
{
- DPRINT1("[%S] IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION
UNIMPLEMENTED\n", m_USBType);
+ DPRINT1("[%s] IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION
UNIMPLEMENTED\n", m_USBType);
Status = STATUS_SUCCESS;
break;
}
default:
{
- DPRINT1("[%S] HandleDeviceControl>Type: IoCtl %x InputBufferLength
%lu OutputBufferLength %lu NOT IMPLEMENTED\n", m_USBType,
+ DPRINT1("[%s] HandleDeviceControl>Type: IoCtl %x InputBufferLength
%lu OutputBufferLength %lu NOT IMPLEMENTED\n", m_USBType,
IoStack->Parameters.DeviceIoControl.IoControlCode,
IoStack->Parameters.DeviceIoControl.InputBufferLength,
IoStack->Parameters.DeviceIoControl.OutputBufferLength);
Propchange: branches/ReactOS-0.3.15/lib/drivers/libusb/hub_controller.cpp
------------------------------------------------------------------------------
--- svn:mergeinfo (original)
+++ svn:mergeinfo Sat Apr 6 19:56:09 2013
@@ -27,3 +27,4 @@
/branches/usb-bringup-trunk/drivers/usb/usbehci/hub_controller.cpp:55524-55543,55548-55554,55556-55567
/branches/wlan-bringup/drivers/usb/usbehci/hub_controller.cpp:54809-54998
/branches/wlan-bringup/drivers/usb/usbehci_new/hub_controller.cpp:54809-54998
+/trunk/reactos/lib/drivers/libusb/hub_controller.cpp:58627-58628
Modified: branches/ReactOS-0.3.15/lib/drivers/libusb/usb_device.cpp
URL:
http://svn.reactos.org/svn/reactos/branches/ReactOS-0.3.15/lib/drivers/libu…
==============================================================================
--- branches/ReactOS-0.3.15/lib/drivers/libusb/usb_device.cpp [iso-8859-1] (original)
+++ branches/ReactOS-0.3.15/lib/drivers/libusb/usb_device.cpp [iso-8859-1] Sat Apr 6
19:56:09 2013
@@ -86,7 +86,7 @@
ULONG m_PortStatus;
PUSBQUEUE m_Queue;
PDMAMEMORYMANAGER m_DmaManager;
- LPCWSTR m_USBType;
+ LPCSTR m_USBType;
PUSB_CONFIGURATION m_ConfigurationDescriptors;
};
@@ -141,7 +141,7 @@
//
// failed to get usb queue
//
- DPRINT1("[%S] GetUsbQueue failed with %x\n", m_USBType, Status);
+ DPRINT1("[%s] GetUsbQueue failed with %x\n", m_USBType, Status);
return Status;
}
@@ -154,7 +154,7 @@
//
// failed to get dma manager
//
- DPRINT1("[%S] GetDMA failed with %x\n", m_USBType, Status);
+ DPRINT1("[%s] GetDMA failed with %x\n", m_USBType, Status);
return Status;
}
@@ -172,7 +172,7 @@
//
// failed to get device descriptor
//
- DPRINT1("[%S] Failed to get device descriptor with %x\n", m_USBType,
Status);
+ DPRINT1("[%s] Failed to get device descriptor with %x\n", m_USBType,
Status);
return Status;
}
@@ -276,7 +276,7 @@
return Usb20Device;
}
- DPRINT1("[%S] GetType Unknown bcdUSB Type %x\n", m_USBType,
m_DeviceDescriptor.bcdUSB);
+ DPRINT1("[%s] GetType Unknown bcdUSB Type %x\n", m_USBType,
m_DeviceDescriptor.bcdUSB);
//PC_ASSERT(FALSE);
return Usb11Device;
@@ -311,7 +311,7 @@
UCHAR OldAddress;
UCHAR Index;
- DPRINT1("[%S] SetDeviceAddress> Address %x\n", m_USBType,
DeviceAddress);
+ DPRINT1("[%s] SetDeviceAddress> Address %x\n", m_USBType,
DeviceAddress);
CtrlSetup = (PUSB_DEFAULT_PIPE_SETUP_PACKET)ExAllocatePoolWithTag(NonPagedPool,
sizeof(USB_DEFAULT_PIPE_SETUP_PACKET), TAG_USBLIB);
if (!CtrlSetup)
@@ -334,7 +334,7 @@
if (!NT_SUCCESS(Status))
{
// failed to set device address
- DPRINT1("[%S] SetDeviceAddress> failed to set device address with %lx
Address %x\n", m_USBType, Status, DeviceAddress);
+ DPRINT1("[%s] SetDeviceAddress> failed to set device address with %lx
Address %x\n", m_USBType, Status, DeviceAddress);
return Status;
}
@@ -351,7 +351,7 @@
Status = CreateDeviceDescriptor();
if (!NT_SUCCESS(Status))
{
- DPRINT1("[%S] SetDeviceAddress failed to retrieve device descriptor with
device address set Error %lx\n", m_USBType, Status);
+ DPRINT1("[%s] SetDeviceAddress failed to retrieve device descriptor with
device address set Error %lx\n", m_USBType, Status);
// return error status
return Status;
}
@@ -362,7 +362,7 @@
m_DeviceDescriptor.bNumConfigurations == 0)
{
// failed to retrieve device descriptor
- DPRINT1("[%S] SetDeviceAddress> device returned bogus device
descriptor\n", m_USBType);
+ DPRINT1("[%s] SetDeviceAddress> device returned bogus device
descriptor\n", m_USBType);
DumpDeviceDescriptor(&m_DeviceDescriptor);
// return error status
@@ -388,7 +388,7 @@
Status = CreateConfigurationDescriptor(Index);
if (!NT_SUCCESS(Status))
{
- DPRINT1("[%S] SetDeviceAddress> failed to retrieve configuration
%lu\n", m_USBType, Index);
+ DPRINT1("[%s] SetDeviceAddress> failed to retrieve configuration
%lu\n", m_USBType, Index);
break;
}
}
@@ -431,7 +431,7 @@
//
// no queue, wtf?
//
- DPRINT1("[%S] CommitIrp> no queue / dma !!!\n", m_USBType);
+ DPRINT1("[%s] CommitIrp> no queue / dma !!!\n", m_USBType);
return STATUS_UNSUCCESSFUL;
}
@@ -444,7 +444,7 @@
//
// failed to build request
//
- DPRINT1("[%S] CommitIrp> CreateUSBRequest failed with %lx\n",
m_USBType, Status);
+ DPRINT1("[%s] CommitIrp> CreateUSBRequest failed with %lx\n",
m_USBType, Status);
return Status;
}
@@ -467,7 +467,7 @@
//
// failed to add request
//
- DPRINT1("[%S] failed add request to queue with %lx\n", m_USBType,
Status);
+ DPRINT1("[%s] failed add request to queue with %lx\n", m_USBType,
Status);
Request->Release();
return Status;
}
@@ -520,7 +520,7 @@
//
// no queue, wtf?
//
- DPRINT1("[%S] CommitSetupPacket> no queue!!!\n", m_USBType);
+ DPRINT1("[%s] CommitSetupPacket> no queue!!!\n", m_USBType);
return STATUS_UNSUCCESSFUL;
}
@@ -533,7 +533,7 @@
//
// failed to build request
//
- DPRINT1("[%S] CommitSetupPacket> CreateUSBRequest failed with %x\n",
m_USBType, Status);
+ DPRINT1("[%s] CommitSetupPacket> CreateUSBRequest failed with %x\n",
m_USBType, Status);
return Status;
}
@@ -546,7 +546,7 @@
//
// failed to initialize request
//
- DPRINT1("[%S] CommitSetupPacket failed to initialize usb request with
%x\n", m_USBType, Status);
+ DPRINT1("[%s] CommitSetupPacket failed to initialize usb request with
%x\n", m_USBType, Status);
Request->Release();
return Status;
}
@@ -560,7 +560,7 @@
//
// failed to add request
//
- DPRINT1("[%S] CommitSetupPacket> failed add request to queue with
%x\n", m_USBType, Status);
+ DPRINT1("[%s] CommitSetupPacket> failed add request to queue with
%x\n", m_USBType, Status);
Request->Release();
return Status;
}
@@ -761,7 +761,7 @@
//
// failed to get partial configuration descriptor
//
- DPRINT1("[%S] Failed to get partial configuration descriptor Status %x Index
%x\n", m_USBType, Status, Index);
+ DPRINT1("[%s] Failed to get partial configuration descriptor Status %x Index
%x\n", m_USBType, Status, Index);
ExFreePoolWithTag(ConfigurationDescriptor, TAG_USBLIB);
return Status;
}
@@ -775,7 +775,7 @@
//
// failed to get full configuration descriptor
//
- DPRINT1("[%S] Failed to get full configuration descriptor Status %x Index
%x\n", m_USBType, Status, Index);
+ DPRINT1("[%s] Failed to get full configuration descriptor Status %x Index
%x\n", m_USBType, Status, Index);
ExFreePoolWithTag(ConfigurationDescriptor, TAG_USBLIB);
return Status;
}
@@ -970,7 +970,7 @@
if (EndpointDescriptor->bLength == 0 ||
EndpointDescriptor->bDescriptorType == USB_INTERFACE_DESCRIPTOR_TYPE)
{
// bogus configuration descriptor
- DPRINT1("[%S] Bogus descriptor found in InterfaceNumber %x Alternate
%x EndpointIndex %x bLength %x bDescriptorType %x\n", m_USBType,
InterfaceDescriptor->bInterfaceNumber, InterfaceDescriptor->bAlternateSetting,
PipeIndex,
+ DPRINT1("[%s] Bogus descriptor found in InterfaceNumber %x Alternate
%x EndpointIndex %x bLength %x bDescriptorType %x\n", m_USBType,
InterfaceDescriptor->bInterfaceNumber, InterfaceDescriptor->bAlternateSetting,
PipeIndex,
EndpointDescriptor->bLength,
EndpointDescriptor->bDescriptorType);
// failed
@@ -1042,7 +1042,7 @@
if (!Found)
{
- DPRINT1("[%S] invalid configuration value %u\n", m_USBType,
ConfigurationDescriptor->bConfigurationValue);
+ DPRINT1("[%s] invalid configuration value %u\n", m_USBType,
ConfigurationDescriptor->bConfigurationValue);
return STATUS_INVALID_PARAMETER;
}
@@ -1064,13 +1064,13 @@
if (!ConfigurationDescriptor)
{
// unconfigure request
- DPRINT1("[%S] SelectConfiguration Unconfigure Request Status %lx\n",
m_USBType, Status);
+ DPRINT1("[%s] SelectConfiguration Unconfigure Request Status %lx\n",
m_USBType, Status);
m_ConfigurationIndex = 0;
return Status;
}
// informal debug print
- DPRINT1("[%S] SelectConfiguration New Configuration %x Old Configuration %x
Result %lx\n", m_USBType, ConfigurationIndex, m_ConfigurationIndex, Status);
+ DPRINT1("[%s] SelectConfiguration New Configuration %x Old Configuration %x
Result %lx\n", m_USBType, ConfigurationIndex, m_ConfigurationIndex, Status);
if (!NT_SUCCESS(Status))
{
//
@@ -1125,7 +1125,7 @@
if (!NT_SUCCESS(Status))
{
// failed
- DPRINT1("[%S] Failed to copy interface descriptor Index %lu
InterfaceDescriptor %p InterfaceInfo %p\n", m_USBType, ConfigurationIndex,
InterfaceDescriptor, InterfaceInfo);
+ DPRINT1("[%s] Failed to copy interface descriptor Index %lu
InterfaceDescriptor %p InterfaceInfo %p\n", m_USBType, ConfigurationIndex,
InterfaceDescriptor, InterfaceInfo);
break;
}
@@ -1167,7 +1167,7 @@
if (!Found)
{
// invalid handle passed
- DPRINT1("[%S] Invalid configuration handle passed %p\n", m_USBType,
ConfigurationHandle);
+ DPRINT1("[%s] Invalid configuration handle passed %p\n", m_USBType,
ConfigurationHandle);
return STATUS_INVALID_PARAMETER;
}
@@ -1182,7 +1182,7 @@
Status = CommitSetupPacket(&CtrlSetup, NULL, 0, NULL);
// informal debug print
- DPRINT1("[%S] SelectInterface AlternateSetting %x InterfaceNumber %x Status
%lx\n", m_USBType, InterfaceInfo->AlternateSetting,
InterfaceInfo->InterfaceNumber, Status);
+ DPRINT1("[%s] SelectInterface AlternateSetting %x InterfaceNumber %x Status
%lx\n", m_USBType, InterfaceInfo->AlternateSetting,
InterfaceInfo->InterfaceNumber, Status);
#if 0
if (!NT_SUCCESS(Status))
{
@@ -1218,7 +1218,7 @@
InterfaceDescriptor =
USBD_ParseConfigurationDescriptor(m_ConfigurationDescriptors[ConfigurationIndex].ConfigurationDescriptor,
InterfaceInfo->InterfaceNumber, InterfaceInfo->AlternateSetting);
if (!InterfaceDescriptor)
{
- DPRINT1("[%S] No such interface Alternate %x InterfaceNumber %x\n",
m_USBType, InterfaceInfo->AlternateSetting, InterfaceInfo->InterfaceNumber);
+ DPRINT1("[%s] No such interface Alternate %x InterfaceNumber %x\n",
m_USBType, InterfaceInfo->AlternateSetting, InterfaceInfo->InterfaceNumber);
return STATUS_UNSUCCESSFUL;
}
@@ -1227,7 +1227,7 @@
if (!NT_SUCCESS(Status))
{
// failed
- DPRINT1("[%S] Failed to build interface descriptor Status %x\n",
m_USBType, Status);
+ DPRINT1("[%s] Failed to build interface descriptor Status %x\n",
m_USBType, Status);
return Status;
}
}
Propchange: branches/ReactOS-0.3.15/lib/drivers/libusb/usb_device.cpp
------------------------------------------------------------------------------
--- svn:mergeinfo (original)
+++ svn:mergeinfo Sat Apr 6 19:56:09 2013
@@ -27,3 +27,4 @@
/branches/usb-bringup-trunk/drivers/usb/usbehci/usb_device.cpp:55524-55543,55548-55554,55556-55567
/branches/wlan-bringup/drivers/usb/usbehci/usb_device.cpp:54809-54998
/branches/wlan-bringup/drivers/usb/usbehci_new/usb_device.cpp:54809-54998
+/trunk/reactos/lib/drivers/libusb/usb_device.cpp:58627-58628