[ros-diffs] [tkreuzer] 57460: [LIBCNTPR] Add atan2 [WIN32K] Remove duplicated floating point math functions [CPORTLIB] Fix an MSVC warning

Author: tkreuzer
Date: Tue Oct  2 21:43:47 2012
New Revision: 57460

URL: http://svn.reactos.org/svn/reactos?rev=57460&view=rev
Log:
[LIBCNTPR] Add atan2
[WIN32K] Remove duplicated floating point math functions
[CPORTLIB] Fix an MSVC warning

Removed:
    trunk/reactos/win32ss/user/ntuser/misc/i386/
Modified:
    trunk/reactos/lib/cportlib/cport.c
    trunk/reactos/lib/sdk/crt/libcntpr.cmake
    trunk/reactos/win32ss/CMakeLists.txt

Modified: trunk/reactos/lib/cportlib/cport.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/lib/cportlib/cport.c?rev=5…
==============================================================================
--- trunk/reactos/lib/cportlib/cport.c [iso-8859-1] (original)
+++ trunk/reactos/lib/cportlib/cport.c [iso-8859-1] Tue Oct  2 21:43:47 2012
@@ -23,7 +23,7 @@
 	- Make this serial-port specific (NS16550 vs other serial port types)
 	- Get x64 KDCOM, KDBG, FREELDR, and other current code to use this
 */
-	
+
 /* INCLUDES *******************************************************************/
 
 #include <cportlib/cportlib.h>
@@ -76,18 +76,18 @@
 	/*
 	 * See "Building Hardware and Firmware to Complement Microsoft Windows Headless
Operation"
 	 * Out-of-Band Management Port Device Requirements:
-	 * The device must act as a 16550 or 16450 UART. 
+	 * The device must act as a 16550 or 16450 UART.
 	 * Windows Server 2003 will test this device using the following process.
 	 *	1. Save off the current modem status register.
 	 *	2. Place the UART into diagnostic mode (The UART is placed into loopback mode
 	 *	   by writing SERIAL_MCR_LOOP to the modem control register).
 	 *	3. The modem status register is read and the high bits are checked. This means
-	 *	   SERIAL_MSR_CTS, SERIAL_MSR_DSR, SERIAL_MSR_RI and SERIAL_MSR_DCD should 
+	 *	   SERIAL_MSR_CTS, SERIAL_MSR_DSR, SERIAL_MSR_RI and SERIAL_MSR_DCD should
 	 *      all be clear.
 	 *	4. Place the UART in diagnostic mode and turn on OUTPUT (Loopback Mode and
 	 *	    OUTPUT are both turned on by writing (SERIAL_MCR_LOOP | SERIAL_MCR_OUT1)
 	 *		to the modem control register).
-	 *	5. The modem status register is read and the ring indicator is checked. 
+	 *	5. The modem status register is read and the ring indicator is checked.
 	 *	   This means SERIAL_MSR_RI should be set.
 	 *	6. Restore original modem status register.
 	 */
@@ -144,7 +144,7 @@
     WRITE_PORT_UCHAR(Port->Address + LINE_CONTROL_REGISTER, Lcr | SERIAL_LCR_DLAB);
 
     /* Set baud rate */
-    Mode = 115200 / Rate;
+    Mode = (USHORT)(115200 / Rate);
     WRITE_PORT_UCHAR(Port->Address + DIVISOR_LATCH_MSB, (UCHAR)((Mode >> 8)
& 0xff));
     WRITE_PORT_UCHAR(Port->Address + DIVISOR_LATCH_LSB, (UCHAR)(Mode & 0xff));
 
@@ -168,7 +168,7 @@
 
 	/* Handle early read-before-init */
 	if (!Port->Address) return CP_GET_NODATA;
-	
+
 	/* If "wait" mode enabled, spin many times, otherwise attempt just once */
 	i = Wait ? 204800 : 1;
     while (i--)

Modified: trunk/reactos/lib/sdk/crt/libcntpr.cmake
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/lib/sdk/crt/libcntpr.cmake…
==============================================================================
--- trunk/reactos/lib/sdk/crt/libcntpr.cmake [iso-8859-1] (original)
+++ trunk/reactos/lib/sdk/crt/libcntpr.cmake [iso-8859-1] Tue Oct  2 21:43:47 2012
@@ -80,6 +80,7 @@
         math/i386/allshl_asm.s
         math/i386/allshr_asm.s
         math/i386/atan_asm.s
+        math/i386/atan2_asm.s
         math/i386/aulldiv_asm.s
         math/i386/aulldvrm_asm.s
         math/i386/aullrem_asm.s

Modified: trunk/reactos/win32ss/CMakeLists.txt
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/win32ss/CMakeLists.txt?rev…
==============================================================================
--- trunk/reactos/win32ss/CMakeLists.txt [iso-8859-1] (original)
+++ trunk/reactos/win32ss/CMakeLists.txt [iso-8859-1] Tue Oct  2 21:43:47 2012
@@ -194,12 +194,7 @@
     gdi/dib/i386/dib24bpp_hline.s
     gdi/dib/i386/dib32bpp_hline.s
     gdi/dib/i386/dib32bpp_colorfill.s
-    gdi/eng/i386/floatobj.S
-    user/ntuser/misc/i386/cos_asm.s
-    user/ntuser/misc/i386/sin_asm.s
-    user/ntuser/misc/i386/atan2_asm.s
-    user/ntuser/misc/i386/floor_asm.s
-    user/ntuser/misc/i386/ceil_asm.s)
+    gdi/eng/i386/floatobj.S)
 else()
 list(APPEND SOURCE
     gdi/dib/dib24bppc.c