[ros-diffs] [tkreuzer] 52197: [BOOTSECTOR] Convert fat bootsector to new syntax

Author: tkreuzer
Date: Sun Jun 12 15:57:36 2011
New Revision: 52197

URL: http://svn.reactos.org/svn/reactos?rev=52197&view=rev
Log:
[BOOTSECTOR]
Convert fat bootsector to new syntax

Added:
    trunk/reactos/boot/freeldr/bootsect/fat.S   (with props)
Modified:
    trunk/reactos/boot/freeldr/bootsect/CMakeLists.txt

Modified: trunk/reactos/boot/freeldr/bootsect/CMakeLists.txt
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/boot/freeldr/bootsect/CMak…
==============================================================================
--- trunk/reactos/boot/freeldr/bootsect/CMakeLists.txt [iso-8859-1] (original)
+++ trunk/reactos/boot/freeldr/bootsect/CMakeLists.txt [iso-8859-1] Sun Jun 12 15:57:36
2011
@@ -4,13 +4,12 @@
 CreateBootSectorTarget2(dosmbr ${CMAKE_CURRENT_SOURCE_DIR}/dosmbr.S
${CMAKE_CURRENT_BINARY_DIR}/dosmbr.bin 7c00)
 #CreateBootSectorTarget2(ext2 ${CMAKE_CURRENT_SOURCE_DIR}/ext2.S
${CMAKE_CURRENT_BINARY_DIR}/ext2.bin 0)
 CreateBootSectorTarget2(fat32 ${CMAKE_CURRENT_SOURCE_DIR}/fat32.S
${CMAKE_CURRENT_BINARY_DIR}/fat32.bin 7c00)
-#CreateBootSectorTarget2(fat ${CMAKE_CURRENT_SOURCE_DIR}/fat.S
${CMAKE_CURRENT_BINARY_DIR}/fat.bin 0)
+CreateBootSectorTarget2(fat ${CMAKE_CURRENT_SOURCE_DIR}/fat.S
${CMAKE_CURRENT_BINARY_DIR}/fat.bin 7c00)
 CreateBootSectorTarget2(isoboot ${CMAKE_CURRENT_SOURCE_DIR}/isoboot.S
${CMAKE_CURRENT_BINARY_DIR}/isoboot.bin 7000)
 CreateBootSectorTarget2(isobtrt ${CMAKE_CURRENT_SOURCE_DIR}/isobtrt.S
${CMAKE_CURRENT_BINARY_DIR}/isobtrt.bin 7000)
 
 if(NOT MSVC)
 CreateBootSectorTarget(ext2 ${CMAKE_CURRENT_SOURCE_DIR}/ext2.asm
${CMAKE_CURRENT_BINARY_DIR}/ext2.bin 0)
-CreateBootSectorTarget(fat ${CMAKE_CURRENT_SOURCE_DIR}/fat.asm
${CMAKE_CURRENT_BINARY_DIR}/fat.bin 0)
 endif()
 
 add_cd_file(TARGET dosmbr DESTINATION loader NO_CAB FILE
${CMAKE_CURRENT_BINARY_DIR}/dosmbr.bin FOR all)

Added: trunk/reactos/boot/freeldr/bootsect/fat.S
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/boot/freeldr/bootsect/fat.…
==============================================================================
--- trunk/reactos/boot/freeldr/bootsect/fat.S (added)
+++ trunk/reactos/boot/freeldr/bootsect/fat.S [iso-8859-1] Sun Jun 12 15:57:36 2011
@@ -1,0 +1,433 @@
+// FAT.ASM
+// FAT12/16 Boot Sector
+// Copyright (c) 1998, 2001, 2002 Brian Palmer
+
+
+
+// This is a FAT12/16 file system boot sector
+// that searches the entire root directory
+// for the file freeldr.sys and loads it into
+// memory.
+//
+// The stack is set to 0000:7BF2 so that the first
+// WORD pushed will be placed at 0000:7BF0
+//
+// The DWORD at 0000:7BFC or BP-04h is the logical
+// sector number of the start of the data area.
+//
+// The DWORD at 0000:7BF8 or BP-08h is the total
+// sector count of the boot drive as reported by
+// the computers bios.
+//
+// The WORD at 0000:7BF6 or BP-0ah is the offset
+// of the ReadSectors function in the boot sector.
+//
+// The WORD at 0000:7BF4 or BP-0ch is the offset
+// of the ReadCluster function in the boot sector.
+//
+// The WORD at 0000:7BF2 or BP-0eh is the offset
+// of the PutChars function in the boot sector.
+//
+// When it locates freeldr.sys on the disk it will
+// load the first sector of the file to 0000:8000
+// With the help of this sector we should be able
+// to load the entire file off the disk, no matter
+// how fragmented it is.
+//
+// We load the entire FAT table into memory at
+// 7000:0000. This improves the speed of floppy disk
+// boots dramatically.
+
+#include <asm.inc>
+
+#define BP_REL(x) [bp+x-offset start]
+
+DataAreaStartHigh		=		2
+DataAreaStartLow		=		4
+BiosCHSDriveSizeHigh	=		6
+BiosCHSDriveSizeLow		=		8
+BiosCHSDriveSize		=		8
+ReadSectorsOffset		=		10
+ReadClusterOffset		=		12
+PutCharsOffset			=		14
+BootSectorStackTop		=		HEX(7c00) - 16
+
+
+// org 7c00h
+
+.code16
+
+start:
+    jmp main
+    nop
+
+OEMName:
+    .ascii "FrLdr1.0"
+BytesPerSector:
+    .word 512
+SectsPerCluster:
+    .byte 1
+ReservedSectors:
+    .word 1
+NumberOfFats:
+    .byte 2
+MaxRootEntries:
+    .word 224
+TotalSectors:
+    .word 2880
+MediaDescriptor:
+    .byte HEX(0f0)
+SectorsPerFat:
+    .word 9
+SectorsPerTrack:
+    .word 18
+NumberOfHeads:
+    .word 2
+HiddenSectors:
+    .long 0
+TotalSectorsBig:
+    .long 0
+BootDrive:
+    .byte HEX(0ff)
+Reserved:
+    .byte 0
+ExtendSig:
+    .byte HEX(29)
+SerialNumber:
+    .long 00000000
+VolumeLabel:
+    .ascii "NO NAME    "
+FileSystem:
+    .ascii "FAT12   "
+
+main:
+    xor ax, ax
+    mov ss, ax
+    mov bp, HEX(7c00)
+    mov sp, BootSectorStackTop				// Setup a stack
+    mov ds, ax								// Make DS correct
+    mov es, ax								// Make ES correct
+
+    cmp byte ptr BP_REL(BootDrive), HEX(0ff) // If they have specified a boot drive then
use it
+    jne GetDriveParameters
+
+    mov byte ptr BP_REL(BootDrive), dl    // Save the boot drive
+
+
+GetDriveParameters:
+    mov ah, 8
+    mov dl, byte ptr BP_REL(BootDrive)    // Get boot drive in dl
+    int HEX(13)                             // Request drive parameters from the bios
+    jnc CalcDriveSize                       // If the call succeeded then calculate the
drive size
+
+    // If we get here then the call to the BIOS failed
+    // so just set CHS equal to the maximum addressable
+    // size
+    mov cx, HEX(0ffff)
+    mov dh, cl
+
+CalcDriveSize:
+    // Now that we have the drive geometry
+    // lets calculate the drive size
+    mov bl, ch              // Put the low 8-bits of the cylinder count into BL
+    mov bh, cl              // Put the high 2-bits in BH
+    shr bh, 6               // Shift them into position, now BX contains the cylinder
count
+    and cl, HEX(3f)         // Mask off cylinder bits from sector count
+    // CL now contains sectors per track and DH contains head count
+    movzx eax, dh           // Move the heads into EAX
+    movzx ebx, bx           // Move the cylinders into EBX
+    movzx ecx, cl           // Move the sectors per track into ECX
+    inc eax                 // Make it one based because the bios returns it zero based
+    inc ebx                 // Make the cylinder count one based also
+    mul ecx                 // Multiply heads with the sectors per track, result in
edx:eax
+    mul ebx                 // Multiply the cylinders with (heads * sectors) [stored in
edx:eax already]
+
+    // We now have the total number of sectors as reported
+    // by the bios in eax, so store it in our variable
+    mov dword ptr [bp - BiosCHSDriveSize], eax
+
+
+    // Now we must find our way to the first sector of the root directory
+    xor ax, ax
+    xor cx, cx
+    mov al, byte ptr BP_REL(NumberOfFats)         // Number of fats
+    mul word ptr BP_REL(SectorsPerFat)            // Times sectors per fat
+    add ax, word ptr BP_REL(HiddenSectors)
+    adc dx, word ptr BP_REL(HiddenSectors+2)    // Add the number of hidden sectors
+    add ax, word ptr BP_REL(ReservedSectors)      // Add the number of reserved sectors
+    adc dx, cx                                      // Add carry bit
+    mov word ptr [bp - DataAreaStartLow], ax     // Save the starting sector of the root
directory
+    mov word ptr [bp - DataAreaStartHigh], dx    // Save it in the first 4 bytes before
the boot sector
+    mov si, word ptr BP_REL(MaxRootEntries)       // Get number of root dir entries in
SI
+    pusha                                           // Save 32-bit logical start sector
of root dir
+    // DX:AX now has the number of the starting sector of the root directory
+
+    // Now calculate the size of the root directory
+    xor dx, dx
+    mov ax, 32                       // Size of dir entry
+    mul si                                  // Times the number of entries
+    mov bx, word ptr BP_REL(BytesPerSector)
+    add ax, bx
+    dec ax
+    div bx                                  // Divided by the size of a sector
+    // AX now has the number of root directory sectors
+
+    add word ptr [bp - DataAreaStartLow], ax    // Add the number of sectors of the root
directory to our other value
+    adc word ptr [bp - DataAreaStartHigh], cx   // Now the first 4 bytes before the boot
sector contain the starting sector of the data area
+    popa                                        // Restore root dir logical sector start
to DX:AX
+
+LoadRootDirSector:
+    mov bx, HEX(7e0)							// We will load the root directory sector
+    mov es, bx								// Right after the boot sector in memory
+    xor bx, bx								// We will load it to [0000:7e00h]
+    xor cx, cx								// Zero out CX
+    inc cx									// Now increment it to 1, we are reading one sector
+    xor di, di								// Zero out di
+    push es									// Save ES because it will get incremented by 20h
+    call ReadSectors						// Read the first sector of the root directory
+    pop es									// Restore ES (ES:DI = 07E0:0000)
+
+SearchRootDirSector:
+    cmp byte ptr es:[di], ch							// If the first byte of the directory entry is zero
then we have
+    jz ErrBoot							// reached the end of the directory and FREELDR.SYS is not here so
reboot
+    pusha									// Save all registers
+    mov cl, 11								// Put 11 in cl (length of filename in directory entry)
+    mov si, offset filename						// Put offset of filename string in DS:SI
+    repe cmpsb								// Compare this directory entry against 'FREELDR SYS'
+    popa									// Restore all the registers
+    jz FoundFreeLoader					// If we found it then jump
+    dec si									// SI holds MaxRootEntries, subtract one
+    jz ErrBoot							// If we are out of root dir entries then reboot
+    add di, 32						// Increment DI by the size of a directory entry
+    cmp di, HEX(0200)							// Compare DI to 512 (DI has offset to next dir entry, make
sure we haven't gone over one sector)
+    jc SearchRootDirSector				// If DI is less than 512 loop again
+    jmp short LoadRootDirSector				// Didn't find FREELDR.SYS in this directory
sector, try again
+
+FoundFreeLoader:
+    // We found freeldr.sys on the disk
+    // so we need to load the first 512
+    // bytes of it to 0000:8000
+    // ES:DI has dir entry (ES:DI == 07E0:XXXX)
+    mov ax, word ptr es:[di + HEX(1a)]				// Get start cluster
+    push ax									// Save start cluster
+    push HEX(800)							// Put 800h on the stack and load it
+    pop es									// Into ES so that we load the cluster at 0000:8000
+    call ReadCluster						// Read the cluster
+    pop ax									// Restore start cluster of FreeLoader
+
+    // Save the addresses of needed functions so
+    // the helper code will know where to call them.
+    mov word ptr [bp-ReadSectorsOffset], offset ReadSectors		// Save the address of
ReadSectors
+    mov word ptr [bp-ReadClusterOffset], offset ReadCluster		// Save the address of
ReadCluster
+    mov word ptr [bp-PutCharsOffset], offset PutChars	// Save the address of PutChars
+
+    // Now AX has start cluster of FreeLoader and we
+    // have loaded the helper code in the first 512 bytes
+    // of FreeLoader to 0000:8000. Now transfer control
+    // to the helper code. Skip the first three bytes
+    // because they contain a jump instruction to skip
+    // over the helper code in the FreeLoader image.
+    //jmp  0000:9003h
+    push 0						// push segment (0x0000)
+    mov bx, [HEX(8000) + HEX(0A8)]		// load the RVA of the EntryPoint into eax
+    add bx, HEX(8003)				// RVA -> VA and skip 3 bytes (jump to fathelper code)
+    push bx						// push offset
+    retf						// Transfer control to FreeLoader
+
+
+
+
+// Displays an error message
+// And reboots
+ErrBoot:
+    mov si, offset msgFreeLdr      // FreeLdr not found message
+    call PutChars           // Display it
+
+Reboot:
+//    mov si, offset msgAnyKey       // Press any key message
+//    call PutChars           // Display it
+    xor ax, ax
+    int HEX(16)                 // Wait for a keypress
+    int HEX(19)                 // Reboot
+
+PutChars:
+    lodsb
+    or al,al
+    jz short Done
+    mov ah, HEX(0e)
+    mov bx, 7
+    int HEX(10)
+    jmp short PutChars
+Done:
+    ret
+
+// Displays a bad boot message
+// And reboots
+BadBoot:
+    mov si, offset msgDiskError    // Bad boot disk message
+    call PutChars           // Display it
+
+    jmp short Reboot
+
+
+// Reads cluster number in AX into [ES:0000]
+ReadCluster:
+    // StartSector = ((Cluster - 2) * SectorsPerCluster) + ReservedSectors +
HiddenSectors;
+    dec ax								// Adjust start cluster by 2
+    dec ax								// Because the data area starts on cluster 2
+    xor ch, ch
+    mov cl, byte ptr BP_REL(SectsPerCluster)
+    mul cx								// Times sectors per cluster
+    add ax, [bp-DataAreaStartLow]		// Add start of data area
+    adc dx, [bp-DataAreaStartHigh]	// Now we have DX:AX with the logical start sector of
OSLOADER.SYS
+    xor bx, bx								// We will load it to [ES:0000], ES loaded before function call
+    //mov   cl,BYTE [BYTE bp+SectsPerCluster]// Sectors per cluster still in CX
+    //call  ReadSectors
+    //ret
+
+
+
+// Reads logical sectors into [ES:BX]
+// DX:AX has logical sector number to read
+// CX has number of sectors to read
+ReadSectors:
+
+    // We can't just check if the start sector is
+    // in the BIOS CHS range. We have to check if
+    // the start sector + length is in that range.
+    pusha
+    dec cx
+    add ax, cx
+    adc dx, 0
+
+    cmp dx, word ptr [bp-BiosCHSDriveSizeHigh]	// Check if they are reading a sector
within CHS range
+    ja  ReadSectorsLBA							// No - go to the LBA routine
+    jb  ReadSectorsCHS							// Yes - go to the old CHS routine
+    cmp ax, word ptr [bp-BiosCHSDriveSizeLow]	// Check if they are reading a sector
within CHS range
+    jbe ReadSectorsCHS							// Yes - go to the old CHS routine
+
+ReadSectorsLBA:
+    popa
+ReadSectorsLBALoop:
+    pusha									// Save logical sector number & sector count
+
+    push 0
+    push 0
+    push dx									// Put 64-bit logical
+    push ax									// block address on stack
+    push es									// Put transfer segment on stack
+    push bx									// Put transfer offset on stack
+    push 1  								// Set transfer count to 1 sector
+    push HEX(10)							// Set size of packet to 10h
+    mov  si,sp								// Setup disk address packet on stack
+
+// We are so totally out of space here that I am forced to
+// comment out this very beautifully written piece of code
+// It would have been nice to have had this check...
+//CheckInt13hExtensions:							// Now make sure this computer supports extended reads
+//		mov  ah,0x41							// AH = 41h
+//		mov  bx,0x55aa							// BX = 55AAh
+//		mov  dl,[BYTE bp+BootDrive]				// DL = drive (80h-FFh)
+//		int  13h								// IBM/MS INT 13 Extensions - INSTALLATION CHECK
+//		jc   PrintDiskError						// CF set on error (extensions not supported)
+//		cmp  bx,0xaa55							// BX = AA55h if installed
+//		jne  PrintDiskError
+//		test cl,1								// CX = API subset support bitmap
+//		jz   PrintDiskError						// Bit 0, extended disk access functions
(AH=42h-44h,47h,48h) supported
+
+
+												// Good, we're here so the computer supports LBA disk access
+												// So finish the extended read
+    mov dl, byte ptr BP_REL(BootDrive)				// Drive number
+    mov ah, HEX(42)								// Int 13h, AH = 42h - Extended Read
+    int HEX(13)								// Call BIOS
+    jc BadBoot							// If the read failed then abort
+
+    add sp, 16						// Remove disk address packet from stack
+
+    popa									// Restore sector count & logical sector number
+
+    inc ax									// Increment Sector to Read
+    adc dx, 0
+
+    push bx
+    mov bx, es
+    add bx, HEX(20)						// Increment read buffer for next sector
+    mov es, bx
+    pop bx
+
+    loop ReadSectorsLBALoop					// Read next sector
+
+    ret
+
+
+// Reads logical sectors into [ES:BX]
+// DX:AX has logical sector number to read
+// CX has number of sectors to read
+// CarryFlag set on error
+ReadSectorsCHS:
+    popa
+ReadSectorsCHSLoop:
+    pusha
+    xchg ax, cx
+    xchg ax, dx
+    xor dx, dx
+    div word ptr BP_REL(SectorsPerTrack)
+    xchg ax, cx
+    div  word ptr BP_REL(SectorsPerTrack)    // Divide logical by SectorsPerTrack
+    inc  dx                        // Sectors numbering starts at 1 not 0
+    xchg cx, dx
+    div  word ptr BP_REL(NumberOfHeads)      // Number of heads
+    mov  dh, dl                     // Head to DH, drive to DL
+    mov  dl, byte ptr BP_REL(BootDrive)            // Drive number
+    mov  ch, al                     // Cylinder in CX
+    ror  ah, 2                      // Low 8 bits of cylinder in CH, high 2 bits
+                                       //  in CL shifted to bits 6 & 7
+    or   cl, ah                     // Or with sector number
+    mov  ax, HEX(0201)
+    int  HEX(13)     // DISK - READ SECTORS INTO MEMORY
+                     // AL = number of sectors to read, CH = track, CL = sector
+                     // DH = head, DL    = drive, ES:BX -> buffer to fill
+                     // Return: CF set on error, AH =    status (see AH=01h), AL    =
number of sectors read
+
+    jc   BadBoot
+
+    popa
+    inc ax       //Increment Sector to Read
+    jnz NoCarryCHS
+    inc dx
+
+
+NoCarryCHS:
+    push bx
+    mov  bx, es
+    add  bx, HEX(20)
+    mov  es, bx
+    pop  bx
+                                        // Increment read buffer for next sector
+    loop ReadSectorsCHSLoop         // Read next sector
+
+    ret
+
+
+msgDiskError:
+    .asciz "Disk error\r\n"
+msgFreeLdr:
+    .asciz "ldr not found\r\n"
+// Sorry, need the space...
+//msgAnyKey:
+//  .asciz "Press any key to restart\r\n"
+filename:
+    .ascii "FREELDR SYS"
+
+    .org 509    // Pad to 509 bytes
+
+BootPartition:
+    .byte 0
+
+BootSignature:
+    .word HEX(0aa55)   // BootSector signature
+
+.endcode16
+
+END

Propchange: trunk/reactos/boot/freeldr/bootsect/fat.S
------------------------------------------------------------------------------
    svn:eol-style = native