7 Jan
2007
7 Jan
'07
7:10 p.m.
Author: fireball
Date: Sun Jan 7 22:10:09 2007
New Revision: 25348
URL: http://svn.reactos.org/svn/reactos?rev=25348&view=rev
Log:
Cleanup of zlib library - removing all stuff which is not needed for building the library
(~280 files/160 folders -> 40 files/no folders).
Whole version of this version of zlib is stored in vendor/zlib/current, and future updates
will be done only via proper vendor imports.
Removed:
trunk/reactos/lib/3rdparty/zlib/Make_vms.com
trunk/reactos/lib/3rdparty/zlib/amiga/
trunk/reactos/lib/3rdparty/zlib/as400/
trunk/reactos/lib/3rdparty/zlib/contrib/
trunk/reactos/lib/3rdparty/zlib/examples/
trunk/reactos/lib/3rdparty/zlib/msdos/
trunk/reactos/lib/3rdparty/zlib/old/
trunk/reactos/lib/3rdparty/zlib/projects/
trunk/reactos/lib/3rdparty/zlib/qnx/
trunk/reactos/lib/3rdparty/zlib/win32/
trunk/reactos/lib/3rdparty/zlib/zlib.3
trunk/reactos/lib/3rdparty/zlib/zlib.html
Removed: trunk/reactos/lib/3rdparty/zlib/Make_vms.com
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/lib/3rdparty/zlib/Make_vmsβ¦
==============================================================================
Binary file - no diff available.
Removed: trunk/reactos/lib/3rdparty/zlib/zlib.3
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/lib/3rdparty/zlib/zlib.3?rβ¦
==============================================================================
--- trunk/reactos/lib/3rdparty/zlib/zlib.3 (original)
+++ trunk/reactos/lib/3rdparty/zlib/zlib.3 (removed)
@@ -1,159 +1,0 @@
-.TH ZLIB 3 "18 July 2005"
-.SH NAME
-zlib \- compression/decompression library
-.SH SYNOPSIS
-[see
-.I zlib.h
-for full description]
-.SH DESCRIPTION
-The
-.I zlib
-library is a general purpose data compression library.
-The code is thread safe.
-It provides in-memory compression and decompression functions,
-including integrity checks of the uncompressed data.
-This version of the library supports only one compression method (deflation)
-but other algorithms will be added later
-and will have the same stream interface.
-.LP
-Compression can be done in a single step if the buffers are large enough
-(for example if an input file is mmap'ed),
-or can be done by repeated calls of the compression function.
-In the latter case,
-the application must provide more input and/or consume the output
-(providing more output space) before each call.
-.LP
-The library also supports reading and writing files in
-.IR gzip (1)
-(.gz) format
-with an interface similar to that of stdio.
-.LP
-The library does not install any signal handler.
-The decoder checks the consistency of the compressed data,
-so the library should never crash even in case of corrupted input.
-.LP
-All functions of the compression library are documented in the file
-.IR zlib.h .
-The distribution source includes examples of use of the library
-in the files
-.I example.c
-and
-.IR minigzip.c .
-.LP
-Changes to this version are documented in the file
-.I ChangeLog
-that accompanies the source,
-and are concerned primarily with bug fixes and portability enhancements.
-.LP
-A Java implementation of
-.I zlib
-is available in the Java Development Kit 1.1:
-.IP
-http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
-.LP
-A Perl interface to
-.IR zlib ,
-written by Paul Marquess (pmqs(a)cpan.org),
-is available at CPAN (Comprehensive Perl Archive Network) sites,
-including:
-.IP
-http://www.cpan.org/modules/by-module/Compress/
-.LP
-A Python interface to
-.IR zlib ,
-written by A.M. Kuchling (amk(a)magnet.com),
-is available in Python 1.5 and later versions:
-.IP
-http://www.python.org/doc/lib/module-zlib.html
-.LP
-A
-.I zlib
-binding for
-.IR tcl (1),
-written by Andreas Kupries (a.kupries(a)westend.com),
-is availlable at:
-.IP
-http://www.westend.com/~kupries/doc/trf/man/man.html
-.LP
-An experimental package to read and write files in .zip format,
-written on top of
-.I zlib
-by Gilles Vollant (info(a)winimage.com),
-is available at:
-.IP
-http://www.winimage.com/zLibDll/unzip.html
-and also in the
-.I contrib/minizip
-directory of the main
-.I zlib
-web site.
-.SH "SEE ALSO"
-The
-.I zlib
-web site can be found at either of these locations:
-.IP
-http://www.zlib.org
-.br
-http://www.gzip.org/zlib/
-.LP
-The data format used by the zlib library is described by RFC
-(Request for Comments) 1950 to 1952 in the files:
-.IP
-http://www.ietf.org/rfc/rfc1950.txt (concerning zlib format)
-.br
-http://www.ietf.org/rfc/rfc1951.txt (concerning deflate format)
-.br
-http://www.ietf.org/rfc/rfc1952.txt (concerning gzip format)
-.LP
-These documents are also available in other formats from:
-.IP
-ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
-.LP
-Mark Nelson (markn(a)ieee.org) wrote an article about
-.I zlib
-for the Jan. 1997 issue of Dr. Dobb's Journal;
-a copy of the article is available at:
-.IP
-http://dogma.net/markn/articles/zlibtool/zlibtool.htm
-.SH "REPORTING PROBLEMS"
-Before reporting a problem,
-please check the
-.I zlib
-web site to verify that you have the latest version of
-.IR zlib ;
-otherwise,
-obtain the latest version and see if the problem still exists.
-Please read the
-.I zlib
-FAQ at:
-.IP
-http://www.gzip.org/zlib/zlib_faq.html
-.LP
-before asking for help.
-Send questions and/or comments to zlib(a)gzip.org,
-or (for the Windows DLL version) to Gilles Vollant (info(a)winimage.com).
-.SH AUTHORS
-Version 1.2.3
-Copyright (C) 1995-2005 Jean-loup Gailly (jloup(a)gzip.org)
-and Mark Adler (madler(a)alumni.caltech.edu).
-.LP
-This software is provided "as-is,"
-without any express or implied warranty.
-In no event will the authors be held liable for any damages
-arising from the use of this software.
-See the distribution directory with respect to requirements
-governing redistribution.
-The deflate format used by
-.I zlib
-was defined by Phil Katz.
-The deflate and
-.I zlib
-specifications were written by L. Peter Deutsch.
-Thanks to all the people who reported problems and suggested various
-improvements in
-.IR zlib ;
-who are too numerous to cite here.
-.LP
-UNIX manual page by R. P. C. Rodgers,
-U.S. National Library of Medicine (rodgers(a)nlm.nih.gov).
-.\" end of man page
Removed: trunk/reactos/lib/3rdparty/zlib/zlib.html
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/lib/3rdparty/zlib/zlib.htmβ¦
==============================================================================
--- trunk/reactos/lib/3rdparty/zlib/zlib.html (original)
+++ trunk/reactos/lib/3rdparty/zlib/zlib.html (removed)
@@ -1,971 +1,0 @@
-<html>
-<head>
- <title>
- zlib general purpose compression library version 1.1.4
- </title>
-</head>
-<body bgcolor="White" text="Black" vlink="Red"
alink="Navy" link="Red">
-<!-- background="zlibbg.gif" -->
-
-<h1> zlib 1.1.4 Manual </h1>
-<hr>
-<a name="Contents"><h2>Contents</h2>
-<ol type="I">
-<li> <a href="#Prologue">Prologue</a>
-<li> <a href="#Introduction">Introduction</a>
-<li> <a href="#Utility functions">Utility functions</a>
-<li> <a href="#Basic functions">Basic functions</a>
-<li> <a href="#Advanced functions">Advanced functions</a>
-<li> <a href="#Constants">Constants</a>
-<li> <a href="#struct z_stream_s">struct z_stream_s</a>
-<li> <a href="#Checksum functions">Checksum functions</a>
-<li> <a href="#Misc">Misc</a>
-</ol>
-<hr>
-<a name="Prologue"><h2> Prologue </h2>
- 'zlib' general purpose compression library version 1.1.4, March 11th, 2002
- <p>
- Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
- <p>
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
- <p>
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
- <ol>
- <li> The origin of this software must not be misrepresented ; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- <li> Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- <li> This notice may not be removed or altered from any source distribution.
- </ol>
-
- <dl>
- <dt>Jean-loup Gailly
- <dd><a href="mailto:jloup@gzip.org">jloup@gzip.org</a>
- <dt>Mark Adler
- <dd><a
href="mailto:madler@alumni.caltech.edu">madler@alumni.caltech.edu</a>
- </dl>
-
- The data format used by the zlib library is described by RFCs (Request for
- Comments) 1950 to 1952 in the files
- <a href="ftp://ds.internic.net/rfc/rfc1950.txt">
- ftp://ds.internic.net/rfc/rfc1950.txt </a>
- (zlib format),
- <a href="ftp://ds.internic.net/rfc/rfc1951.txt">
- rfc1951.txt </a>
- (<a href="#deflate">deflate</a> format) and
- <a href="ftp://ds.internic.net/rfc/rfc1952.txt">
- rfc1952.txt </a>
- (gzip format).
- <p>
- This manual is converted from zlib.h by
- <a href="mailto:piaip@csie.ntu.edu.tw"> piaip </a>
- <p>
- Visit <a href="http://ftp.cdrom.com/pub/infozip/zlib/">
- http://ftp.cdrom.com/pub/infozip/zlib/</a>
- for the official zlib web page.
- <p>
-
-<hr>
-<a name="Introduction"><h2> Introduction </h2>
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms will be added later and will have the same
- stream interface.
- <p>
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
- (providing more output space) before each call.
- <p>
-
- The library also supports reading and writing files in gzip (.gz) format
- with an interface similar to that of stdio.
- <p>
-
- The library does not install any signal handler. The decoder checks
- the consistency of the compressed data, so the library should never
- crash even in case of corrupted input.
- <p>
-
-<hr>
-<a name="Utility functions"><h2> Utility functions </h2>
- The following utility functions are implemented on top of the
- <a href="#Basic functions">basic stream-oriented functions</a>.
- To simplify the interface, some
- default options are assumed (compression level and memory usage,
- standard memory allocation functions). The source code of these
- utility functions can easily be modified if you need special options.
-<h3> Function list </h3>
-<ul>
-<li> int <a href="#compress">compress</a> (Bytef *dest,
uLongf *destLen, const Bytef *source, uLong sourceLen);
-<li> int <a href="#compress2">compress2</a> (Bytef *dest,
uLongf *destLen, const Bytef *source, uLong sourceLen, int level);
-<li> int <a href="#uncompress">uncompress</a> (Bytef *dest,
uLongf *destLen, const Bytef *source, uLong sourceLen);
-<li> typedef voidp gzFile;
-<li> gzFile <a href="#gzopen">gzopen</a> (const char
*path, const char *mode);
-<li> gzFile <a href="#gzdopen">gzdopen</a> (int fd, const
char *mode);
-<li> int <a href="#gzsetparams">gzsetparams</a> (gzFile
file, int level, int strategy);
-<li> int <a href="#gzread">gzread</a> (gzFile file,
voidp buf, unsigned len);
-<li> int <a href="#gzwrite">gzwrite</a> (gzFile file,
const voidp buf, unsigned len);
-<li> int VA <a href="#gzprintf">gzprintf</a> (gzFile file,
const char *format, ...);
-<li> int <a href="#gzputs">gzputs</a> (gzFile file, const
char *s);
-<li> char * <a href="#gzgets">gzgets</a> (gzFile file, char
*buf, int len);
-<li> int <a href="#gzputc">gzputc</a> (gzFile file, int
c);
-<li> int <a href="#gzgetc">gzgetc</a> (gzFile file);
-<li> int <a href="#gzflush">gzflush</a> (gzFile file, int
flush);
-<li> z_off_t <a href="#gzseek">gzseek</a> (gzFile file,
z_off_t offset, int whence);
-<li> z_off_t <a href="#gztell">gztell</a> (gzFile file);
-<li> int <a href="#gzrewind">gzrewind</a> (gzFile file);
-<li> int <a href="#gzeof">gzeof</a> (gzFile file);
-<li> int <a href="#gzclose">gzclose</a> (gzFile file);
-<li> const char * <a href="#gzerror">gzerror</a> (gzFile
file, int *errnum);
-</ul>
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt> int <a
name="compress">compress</a> (Bytef *dest, uLongf *destLen, const
Bytef *source, uLong sourceLen);</font>
-<dd>
- Compresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be at least 0.1% larger than
- sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
- compressed buffer.<p>
- This function can be used to <a href="#compress">compress</a>
a whole file at once if the
- input file is mmap'ed.<p>
- <a href="#compress">compress</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
- enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there
was not enough room in the output
- buffer.<p>
-
-<font color="Blue"><dt> int <a
name="compress2">compress2</a> (Bytef *dest, uLongf *destLen, const
Bytef *source, uLong sourceLen, int level);</font>
-<dd>
- Compresses the source buffer into the destination buffer. The level
- parameter has the same meaning as in <a
href="#deflateInit">deflateInit</a>. sourceLen is the byte
- length of the source buffer. Upon entry, destLen is the total size of the
- destination buffer, which must be at least 0.1% larger than sourceLen plus
- 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
- <p>
-
- <a href="#compress2">compress2</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
- memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not
enough room in the output buffer,
- <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the level
parameter is invalid.
- <p>
-
-<font color="Blue"><dt> int <a
name="uncompress">uncompress</a> (Bytef *dest, uLongf *destLen, const
Bytef *source, uLong sourceLen);</font>
-<dd>
- Decompresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be large enough to hold the
- entire uncompressed data. (The size of the uncompressed data must have
- been saved previously by the compressor and transmitted to the decompressor
- by some mechanism outside the scope of this compression library.)
- Upon exit, destLen is the actual size of the compressed buffer. <p>
- This function can be used to decompress a whole file at once if the
- input file is mmap'ed.
- <p>
-
- <a href="#uncompress">uncompress</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
- enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there
was not enough room in the output
- buffer, or <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input
data was corrupted.
- <p>
-
-<dt> typedef voidp gzFile;
-<dd> <p>
-
-<font color="Blue"><dt> gzFile <a
name="gzopen">gzopen</a> (const char *path, const char
*mode);</font>
-<dd>
- Opens a gzip (.gz) file for reading or writing. The mode parameter
- is as in fopen ("rb" or "wb") but can also include a compression
level
- ("wb9") or a strategy: 'f' for filtered data as in "wb6f",
'h' for
- Huffman only compression as in "wb1h". (See the description
- of <a href="#deflateInit2">deflateInit2</a> for more information
about the strategy parameter.)
- <p>
-
- <a href="#gzopen">gzopen</a> can be used to read a file which
is not in gzip format ; in this
- case <a href="#gzread">gzread</a> will directly read from the
file without decompression.
- <p>
-
- <a href="#gzopen">gzopen</a> returns NULL if the file could
not be opened or if there was
- insufficient memory to allocate the (de)compression <a
href="#state">state</a> ; errno
- can be checked to distinguish the two cases (if errno is zero, the
- zlib error is <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a>).
- <p>
-
-<font color="Blue"><dt> gzFile <a
name="gzdopen">gzdopen</a> (int fd, const char *mode);</font>
-<dd>
- <a href="#gzdopen">gzdopen</a>() associates a gzFile with the
file descriptor fd. File
- descriptors are obtained from calls like open, dup, creat, pipe or
- fileno (in the file has been previously opened with fopen).
- The mode parameter is as in <a href="#gzopen">gzopen</a>.
- <p>
- The next call of <a href="#gzclose">gzclose</a> on the
returned gzFile will also close the
- file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
- descriptor fd. If you want to keep fd open, use <a
href="#gzdopen">gzdopen</a>(dup(fd), mode).
- <p>
- <a href="#gzdopen">gzdopen</a> returns NULL if there was
insufficient memory to allocate
- the (de)compression <a href="#state">state</a>.
- <p>
-
-<font color="Blue"><dt> int <a
name="gzsetparams">gzsetparams</a> (gzFile file, int level, int
strategy);</font>
-<dd>
- Dynamically update the compression level or strategy. See the description
- of <a href="#deflateInit2">deflateInit2</a> for the meaning of
these parameters.
- <p>
- <a href="#gzsetparams">gzsetparams</a> returns <a
href="#Z_OK">Z_OK</a> if success, or <a
href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the file was not
- opened for writing.
- <p>
-
-<font color="Blue"><dt> int <a
name="gzread">gzread</a> (gzFile file, voidp buf, unsigned
len);</font>
-<dd>
- Reads the given number of uncompressed bytes from the compressed file.
- If the input file was not in gzip format, <a
href="#gzread">gzread</a> copies the given number
- of bytes into the buffer.
- <p>
- <a href="#gzread">gzread</a> returns the number of
uncompressed bytes actually read (0 for
- end of file, -1 for error).
- <p>
-
-<font color="Blue"><dt> int <a
name="gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned
len);</font>
-<dd>
- Writes the given number of uncompressed bytes into the compressed file.
- <a href="#gzwrite">gzwrite</a> returns the number of
uncompressed bytes actually written
- (0 in case of error).
- <p>
-
-<font color="Blue"><dt> int VA <a
name="gzprintf">gzprintf</a> (gzFile file, const char *format,
...);</font>
-<dd>
- Converts, formats, and writes the args to the compressed file under
- control of the format string, as in fprintf. <a
href="#gzprintf">gzprintf</a> returns the number of
- uncompressed bytes actually written (0 in case of error).
- <p>
-
-<font color="Blue"><dt> int <a
name="gzputs">gzputs</a> (gzFile file, const char *s);</font>
-<dd>
- Writes the given null-terminated string to the compressed file, excluding
- the terminating null character.
- <p>
- <a href="#gzputs">gzputs</a> returns the number of characters
written, or -1 in case of error.
- <p>
-
-<font color="Blue"><dt> char * <a
name="gzgets">gzgets</a> (gzFile file, char *buf, int
len);</font>
-<dd>
- Reads bytes from the compressed file until len-1 characters are read, or
- a newline character is read and transferred to buf, or an end-of-file
- condition is encountered. The string is then terminated with a null
- character.
- <p>
- <a href="#gzgets">gzgets</a> returns buf, or <a
href="#Z_NULL">Z_NULL</a> in case of error.
- <p>
-
-<font color="Blue"><dt> int <a
name="gzputc">gzputc</a> (gzFile file, int c);</font>
-<dd>
- Writes c, converted to an unsigned char, into the compressed file.
- <a href="#gzputc">gzputc</a> returns the value that was written,
or -1 in case of error.
- <p>
-
-<font color="Blue"><dt> int <a
name="gzgetc">gzgetc</a> (gzFile file);</font>
-<dd>
- Reads one byte from the compressed file. <a
href="#gzgetc">gzgetc</a> returns this byte
- or -1 in case of end of file or error.
- <p>
-
-<font color="Blue"><dt> int <a
name="gzflush">gzflush</a> (gzFile file, int flush);</font>
-<dd>
- Flushes all pending output into the compressed file. The parameter
- flush is as in the <a href="#deflate">deflate</a>() function.
The return value is the zlib
- error number (see function <a href="#gzerror">gzerror</a>
below). <a href="#gzflush">gzflush</a> returns <a
href="#Z_OK">Z_OK</a> if
- the flush parameter is <a href="#Z_FINISH">Z_FINISH</a> and all
output could be flushed.
- <p>
- <a href="#gzflush">gzflush</a> should be called only when
strictly necessary because it can
- degrade compression.
- <p>
-
-<font color="Blue"><dt> z_off_t <a
name="gzseek">gzseek</a> (gzFile file, z_off_t offset, int
whence);</font>
-<dd>
- Sets the starting position for the next <a
href="#gzread">gzread</a> or <a
href="#gzwrite">gzwrite</a> on the
- given compressed file. The offset represents a number of bytes in the
- uncompressed data stream. The whence parameter is defined as in lseek(2);
- the value SEEK_END is not supported.
- <p>
- If the file is opened for reading, this function is emulated but can be
- extremely slow. If the file is opened for writing, only forward seeks are
- supported ; <a href="#gzseek">gzseek</a> then compresses a
sequence of zeroes up to the new
- starting position.
- <p>
- <a href="#gzseek">gzseek</a> returns the resulting offset
location as measured in bytes from
- the beginning of the uncompressed stream, or -1 in case of error, in
- particular if the file is opened for writing and the new starting position
- would be before the current position.
- <p>
-
-<font color="Blue"><dt> int <a
name="gzrewind">gzrewind</a> (gzFile file);</font>
-<dd>
- Rewinds the given file. This function is supported only for reading.
- <p>
- <a href="#gzrewind">gzrewind</a>(file) is equivalent to
(int)<a href="#gzseek">gzseek</a>(file, 0L, SEEK_SET)
- <p>
-
-<font color="Blue"><dt> z_off_t <a
name="gztell">gztell</a> (gzFile file);</font>
-<dd>
- Returns the starting position for the next <a
href="#gzread">gzread</a> or <a
href="#gzwrite">gzwrite</a> on the
- given compressed file. This position represents a number of bytes in the
- uncompressed data stream.
- <p>
-
- <a href="#gztell">gztell</a>(file) is equivalent to <a
href="#gzseek">gzseek</a>(file, 0L, SEEK_CUR)
- <p>
-
-<font color="Blue"><dt> int <a
name="gzeof">gzeof</a> (gzFile file);</font>
-<dd>
- Returns 1 when EOF has previously been detected reading the given
- input stream, otherwise zero.
- <p>
-
-<font color="Blue"><dt> int <a
name="gzclose">gzclose</a> (gzFile file);</font>
-<dd>
- Flushes all pending output if necessary, closes the compressed file
- and deallocates all the (de)compression <a
href="#state">state</a>. The return value is the zlib
- error number (see function <a href="#gzerror">gzerror</a>
below).
- <p>
-
-<font color="Blue"><dt> const char * <a
name="gzerror">gzerror</a> (gzFile file, int *errnum);</font>
-<dd>
- Returns the error message for the last error which occurred on the
- given compressed file. errnum is set to zlib error number. If an
- error occurred in the file system and not in the compression library,
- errnum is set to <a href="#Z_ERRNO">Z_ERRNO</a> and the
application may consult errno
- to get the exact error code.
- <p>
-</dl>
-<hr>
-<a name="Basic functions"><h2> Basic functions </h2>
-<h3> Function list </h3>
-<ul>
-<li> const char * <a href="#zlibVersion">zlibVersion</a>
(void);
-<li> int <a href="#deflateInit">deflateInit</a> (<a
href="#z_streamp">z_streamp</a> strm, int level);
-<li> int <a href="#deflate">deflate</a> (<a
href="#z_streamp">z_streamp</a> strm, int flush);
-<li> int <a href="#deflateEnd">deflateEnd</a> (<a
href="#z_streamp">z_streamp</a> strm);
-<li> int <a href="#inflateInit">inflateInit</a> (<a
href="#z_streamp">z_streamp</a> strm);
-<li> int <a href="#inflate">inflate</a> (<a
href="#z_streamp">z_streamp</a> strm, int flush);
-<li> int <a href="#inflateEnd">inflateEnd</a> (<a
href="#z_streamp">z_streamp</a> strm);
-</ul>
-
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt> const char * <a
name="zlibVersion">zlibVersion</a> (void);</font>
-<dd> The application can compare <a
href="#zlibVersion">zlibVersion</a> and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- This check is automatically made by <a
href="#deflateInit">deflateInit</a> and <a
href="#inflateInit">inflateInit</a>.
- <p>
-
-<font color="Blue"><dt> int <a
name="deflateInit">deflateInit</a> (<a
href="#z_streamp">z_streamp</a> strm, int level);</font>
-<dd>
- Initializes the internal stream <a href="#state">state</a> for
compression. The fields
- <a href="#zalloc">zalloc</a>, <a
href="#zfree">zfree</a> and <a
href="#opaque">opaque</a> must be initialized before by the caller.
- If <a href="#zalloc">zalloc</a> and <a
href="#zfree">zfree</a> are set to <a
href="#Z_NULL">Z_NULL</a>, <a
href="#deflateInit">deflateInit</a> updates them to
- use default allocation functions.
- <p>
-
- The compression level must be <a
href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>, or between 0
and 9:
- 1 gives best speed, 9 gives best compression, 0 gives no compression at
- all (the input data is simply copied a block at a time).
- <p>
-
- <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>
requests a default compromise between speed and
- compression (currently equivalent to level 6).
- <p>
-
- <a href="#deflateInit">deflateInit</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
- enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if
level is not a valid compression level,
- <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib
library version (<a href="#zlib_version">zlib_version</a>) is
incompatible
- with the version assumed by the caller (ZLIB_VERSION).
- <a href="#msg">msg</a> is set to null if there is no error
message. <a href="#deflateInit">deflateInit</a> does not
- perform any compression: this will be done by <a
href="#deflate">deflate</a>().
- <p>
-
-<font color="Blue"><dt> int <a
name="deflate">deflate</a> (<a
href="#z_streamp">z_streamp</a> strm, int flush);</font>
-<dd>
- <a href="#deflate">deflate</a> compresses as much data as
possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce some
- output latency (reading input without producing any output) except when
- forced to flush.<p>
-
- The detailed semantics are as follows. <a
href="#deflate">deflate</a> performs one or both of the
- following actions:
-
- <ul>
- <li> Compress more input starting at <a
href="#next_in">next_in</a> and update <a
href="#next_in">next_in</a> and <a
href="#avail_in">avail_in</a>
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), <a
href="#next_in">next_in</a> and <a
href="#avail_in">avail_in</a> are updated and
- processing will resume at this point for the next call of <a
href="#deflate">deflate</a>().
-
- <li>
- Provide more output starting at <a
href="#next_out">next_out</a> and update <a
href="#next_out">next_out</a> and <a
href="#avail_out">avail_out</a>
- accordingly. This action is forced if the parameter flush is non zero.
- Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications).
- Some output may be provided even if flush is not set.
- </ul> <p>
-
- Before the call of <a href="#deflate">deflate</a>(), the
application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating <a href="#avail_in">avail_in</a> or
<a href="#avail_out">avail_out</a> accordingly ; <a
href="#avail_out">avail_out</a>
- should never be zero before the call. The application can consume the
- compressed output when it wants, for example when the output buffer is full
- (<a href="#avail_out">avail_out</a> == 0), or after each call of
<a href="#deflate">deflate</a>(). If <a
href="#deflate">deflate</a> returns <a
href="#Z_OK">Z_OK</a>
- and with zero <a href="#avail_out">avail_out</a>, it must be
called again after making room in the
- output buffer because there might be more output pending.
- <p>
-
- If the parameter flush is set to <a
href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, all pending output is
- flushed to the output buffer and the output is aligned on a byte boundary, so
- that the decompressor can get all input data available so far. (In particular
- <a href="#avail_in">avail_in</a> is zero after the call if enough
output space has been provided
- before the call.) Flushing may degrade compression for some compression
- algorithms and so it should be used only when necessary.
- <p>
-
- If flush is set to <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>,
all output is flushed as with
- <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, and the compression
<a href="#state">state</a> is reset so that decompression can
- restart from this point if previous compressed data has been damaged or if
- random access is desired. Using <a
href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a> too often can seriously degrade
- the compression.
- <p>
-
- If <a href="#deflate">deflate</a> returns with <a
href="#avail_out">avail_out</a> == 0, this function must be called
again
- with the same value of the flush parameter and more output space (updated
- <a href="#avail_out">avail_out</a>), until the flush is complete
(<a href="#deflate">deflate</a> returns with non-zero
- <a href="#avail_out">avail_out</a>).
- <p>
-
- If the parameter flush is set to <a
href="#Z_FINISH">Z_FINISH</a>, pending input is processed,
- pending output is flushed and <a href="#deflate">deflate</a>
returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> if there
- was enough output space ; if <a href="#deflate">deflate</a>
returns with <a href="#Z_OK">Z_OK</a>, this function must be
- called again with <a href="#Z_FINISH">Z_FINISH</a> and more
output space (updated <a href="#avail_out">avail_out</a>) but no
- more input data, until it returns with <a
href="#Z_STREAM_END">Z_STREAM_END</a> or an error. After
- <a href="#deflate">deflate</a> has returned <a
href="#Z_STREAM_END">Z_STREAM_END</a>, the only possible operations on
the
- stream are <a href="#deflateReset">deflateReset</a> or <a
href="#deflateEnd">deflateEnd</a>.
- <p>
-
- <a href="#Z_FINISH">Z_FINISH</a> can be used immediately after
<a href="#deflateInit">deflateInit</a> if all the compression
- is to be done in a single step. In this case, <a
href="#avail_out">avail_out</a> must be at least
- 0.1% larger than <a href="#avail_in">avail_in</a> plus 12 bytes.
If <a href="#deflate">deflate</a> does not return
- <a href="#Z_STREAM_END">Z_STREAM_END</a>, then it must be called
again as described above.
- <p>
-
- <a href="#deflate">deflate</a>() sets strm-> <a
href="#adler">adler</a> to the <a
href="#adler32">adler32</a> checksum of all input read
- so far (that is, <a href="#total_in">total_in</a> bytes).
- <p>
-
- <a href="#deflate">deflate</a>() may update <a
href="#data_type">data_type</a> if it can make a good guess about
- the input data type (<a href="#Z_ASCII">Z_ASCII</a> or <a
href="#Z_BINARY">Z_BINARY</a>). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect
- the compression algorithm in any manner.
- <p>
-
- <a href="#deflate">deflate</a>() returns <a
href="#Z_OK">Z_OK</a> if some progress has been made (more input
- processed or more output produced), <a
href="#Z_STREAM_END">Z_STREAM_END</a> if all input has been
- consumed and all output has been produced (only when flush is set to
- <a href="#Z_FINISH">Z_FINISH</a>), <a
href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a
href="#state">state</a> was inconsistent (for example
- if <a href="#next_in">next_in</a> or <a
href="#next_out">next_out</a> was NULL), <a
href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible
- (for example <a href="#avail_in">avail_in</a> or <a
href="#avail_out">avail_out</a> was zero).
- <p>
-
-<font color="Blue"><dt> int <a
name="deflateEnd">deflateEnd</a> (<a
href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
- <p>
-
- <a href="#deflateEnd">deflateEnd</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the
- stream <a href="#state">state</a> was inconsistent, <a
href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the stream was freed
- prematurely (some input or output was discarded). In the error case,
- <a href="#msg">msg</a> may be set but then points to a static
string (which must not be
- deallocated).
- <p>
-
-<font color="Blue"><dt> int <a
name="inflateInit">inflateInit</a> (<a
href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
- Initializes the internal stream <a href="#state">state</a> for
decompression. The fields
- <a href="#next_in">next_in</a>, <a
href="#avail_in">avail_in</a>, <a
href="#zalloc">zalloc</a>, <a
href="#zfree">zfree</a> and <a
href="#opaque">opaque</a> must be initialized before by
- the caller. If <a href="#next_in">next_in</a> is not <a
href="#Z_NULL">Z_NULL</a> and <a
href="#avail_in">avail_in</a> is large enough (the exact
- value depends on the compression method), <a
href="#inflateInit">inflateInit</a> determines the
- compression method from the zlib header and allocates all data structures
- accordingly ; otherwise the allocation will be deferred to the first call of
- <a href="#inflate">inflate</a>. If <a
href="#zalloc">zalloc</a> and <a
href="#zfree">zfree</a> are set to <a
href="#Z_NULL">Z_NULL</a>, <a
href="#inflateInit">inflateInit</a> updates them to
- use default allocation functions.
- <p>
-
- <a href="#inflateInit">inflateInit</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
- memory, <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the
zlib library version is incompatible with the
- version assumed by the caller. <a href="#msg">msg</a> is set to
null if there is no error
- message. <a href="#inflateInit">inflateInit</a> does not perform
any decompression apart from reading
- the zlib header if present: this will be done by <a
href="#inflate">inflate</a>(). (So <a
href="#next_in">next_in</a> and
- <a href="#avail_in">avail_in</a> may be modified, but <a
href="#next_out">next_out</a> and <a
href="#avail_out">avail_out</a> are unchanged.)
- <p>
-
-<font color="Blue"><dt> int <a
name="inflate">inflate</a> (<a
href="#z_streamp">z_streamp</a> strm, int flush);</font>
-<dd>
- <a href="#inflate">inflate</a> decompresses as much data as
possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may some
- introduce some output latency (reading input without producing any output)
- except when forced to flush.
- <p>
-
- The detailed semantics are as follows. <a
href="#inflate">inflate</a> performs one or both of the
- following actions:
-
- <ul>
- <li> Decompress more input starting at <a
href="#next_in">next_in</a> and update <a
href="#next_in">next_in</a> and <a
href="#avail_in">avail_in</a>
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), <a
href="#next_in">next_in</a> is updated and processing
- will resume at this point for the next call of <a
href="#inflate">inflate</a>().
-
- <li> Provide more output starting at <a
href="#next_out">next_out</a> and update <a
href="#next_out">next_out</a> and
- <a href="#avail_out">avail_out</a> accordingly. <a
href="#inflate">inflate</a>() provides as much output as possible,
- until there is no more input data or no more space in the output buffer
- (see below about the flush parameter).
- </ul> <p>
-
- Before the call of <a href="#inflate">inflate</a>(), the
application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (<a
href="#avail_out">avail_out</a> == 0), or after each
- call of <a href="#inflate">inflate</a>(). If <a
href="#inflate">inflate</a> returns <a
href="#Z_OK">Z_OK</a> and with zero <a
href="#avail_out">avail_out</a>, it
- must be called again after making room in the output buffer because there
- might be more output pending.
- <p>
-
- If the parameter flush is set to <a
href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, <a
href="#inflate">inflate</a> flushes as much
- output as possible to the output buffer. The flushing behavior of <a
href="#inflate">inflate</a> is
- not specified for values of the flush parameter other than <a
href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>
- and <a href="#Z_FINISH">Z_FINISH</a>, but the current
implementation actually flushes as much output
- as possible anyway.
- <p>
-
- <a href="#inflate">inflate</a>() should normally be called
until it returns <a href="#Z_STREAM_END">Z_STREAM_END</a> or an
- error. However if all decompression is to be performed in a single step
- (a single call of <a href="#inflate">inflate</a>), the parameter
flush should be set to
- <a href="#Z_FINISH">Z_FINISH</a>. In this case all pending input
is processed and all pending
- output is flushed ; <a href="#avail_out">avail_out</a> must be
large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be <a href="#inflateEnd">inflateEnd</a> to deallocate the
decompression <a href="#state">state</a>. The use of <a
href="#Z_FINISH">Z_FINISH</a>
- is never required, but can be used to inform <a
href="#inflate">inflate</a> that a faster routine
- may be used for the single <a href="#inflate">inflate</a>()
call.
- <p>
-
- If a preset dictionary is needed at this point (see <a
href="#inflateSetDictionary">inflateSetDictionary</a>
- below), <a href="#inflate">inflate</a> sets strm-<a
href="#adler">adler</a> to the <a
href="#adler32">adler32</a> checksum of the
- dictionary chosen by the compressor and returns <a
href="#Z_NEED_DICT">Z_NEED_DICT</a> ; otherwise
- it sets strm-> <a href="#adler">adler</a> to the <a
href="#adler32">adler32</a> checksum of all output produced
- so far (that is, <a href="#total_out">total_out</a> bytes) and
returns <a href="#Z_OK">Z_OK</a>, <a
href="#Z_STREAM_END">Z_STREAM_END</a> or
- an error code as described below. At the end of the stream, <a
href="#inflate">inflate</a>()
- checks that its computed <a href="#adler32">adler32</a> checksum
is equal to that saved by the
- compressor and returns <a href="#Z_STREAM_END">Z_STREAM_END</a>
only if the checksum is correct.
- <p>
-
- <a href="#inflate">inflate</a>() returns <a
href="#Z_OK">Z_OK</a> if some progress has been made (more input
processed
- or more output produced), <a
href="#Z_STREAM_END">Z_STREAM_END</a> if the end of the compressed data
has
- been reached and all uncompressed output has been produced, <a
href="#Z_NEED_DICT">Z_NEED_DICT</a> if a
- preset dictionary is needed at this point, <a
href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was
- corrupted (input stream not conforming to the zlib format or incorrect
- <a href="#adler32">adler32</a> checksum), <a
href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was
inconsistent
- (for example if <a href="#next_in">next_in</a> or <a
href="#next_out">next_out</a> was NULL), <a
href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
- enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no
progress is possible or if there was not
- enough room in the output buffer when <a
href="#Z_FINISH">Z_FINISH</a> is used. In the <a
href="#Z_DATA_ERROR">Z_DATA_ERROR</a>
- case, the application may then call <a
href="#inflateSync">inflateSync</a> to look for a good
- compression block.
- <p>
-
-<font color="Blue"><dt> int <a
name="inflateEnd">inflateEnd</a> (<a
href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
- <p>
-
- <a href="#inflateEnd">inflateEnd</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a
href="#state">state</a>
- was inconsistent. In the error case, <a href="#msg">msg</a> may
be set but then points to a
- static string (which must not be deallocated).
-</dl>
-<hr>
-<a name="Advanced functions"><h2> Advanced functions </h2>
- The following functions are needed only in some special applications.
-<h3> Function list </h3>
-<ul>
-<li> int <a href="#deflateInit2">deflateInit2</a> (<a
href="#z_streamp">z_streamp</a> strm,
-<li> int <a
href="#deflateSetDictionary">deflateSetDictionary</a> (<a
href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt
dictLength);
-<li> int <a href="#deflateCopy">deflateCopy</a> (<a
href="#z_streamp">z_streamp</a> dest, <a
href="#z_streamp">z_streamp</a> source);
-<li> int <a href="#deflateReset">deflateReset</a> (<a
href="#z_streamp">z_streamp</a> strm);
-<li> int <a href="#deflateParams">deflateParams</a> (<a
href="#z_streamp">z_streamp</a> strm, int level, int strategy);
-<li> int <a href="#inflateInit2">inflateInit2</a> (<a
href="#z_streamp">z_streamp</a> strm, int windowBits);
-<li> int <a
href="#inflateSetDictionary">inflateSetDictionary</a> (<a
href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt
dictLength);
-<li> int <a href="#inflateSync">inflateSync</a> (<a
href="#z_streamp">z_streamp</a> strm);
-<li> int <a href="#inflateReset">inflateReset</a> (<a
href="#z_streamp">z_streamp</a> strm);
-
-</ul>
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt> int <a
name="deflateInit2">deflateInit2</a> (<a
href="#z_streamp">z_streamp</a> strm, int level, int method, int
windowBits, int memLevel, int strategy);</font>
-
-<dd> This is another version of <a
href="#deflateInit">deflateInit</a> with more compression options. The
- fields <a href="#next_in">next_in</a>, <a
href="#zalloc">zalloc</a>, <a
href="#zfree">zfree</a> and <a
href="#opaque">opaque</a> must be initialized before by
- the caller.<p>
-
- The method parameter is the compression method. It must be <a
href="#Z_DEFLATED">Z_DEFLATED</a> in
- this version of the library.<p>
-
- The windowBits parameter is the base two logarithm of the window size
- (the size of the history buffer). It should be in the range 8..15 for this
- version of the library. Larger values of this parameter result in better
- compression at the expense of memory usage. The default value is 15 if
- <a href="#deflateInit">deflateInit</a> is used
instead.<p>
-
- The memLevel parameter specifies how much memory should be allocated
- for the internal compression <a href="#state">state</a>.
memLevel=1 uses minimum memory but
- is slow and reduces compression ratio ; memLevel=9 uses maximum memory
- for optimal speed. The default value is 8. See zconf.h for total memory
- usage as a function of windowBits and memLevel.<p>
-
- The strategy parameter is used to tune the compression algorithm. Use the
- value <a href="#Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> for
normal data, <a href="#Z_FILTERED">Z_FILTERED</a> for data produced
by a
- filter (or predictor), or <a
href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> to force Huffman encoding
only (no
- string match). Filtered data consists mostly of small values with a
- somewhat random distribution. In this case, the compression algorithm is
- tuned to <a href="#compress">compress</a> them better. The
effect of <a href="#Z_FILTERED">Z_FILTERED</a> is to force more
- Huffman coding and less string matching ; it is somewhat intermediate
- between Z_DEFAULT and <a
href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>. The strategy parameter only
affects
- the compression ratio but not the correctness of the compressed output even
- if it is not set appropriately.<p>
-
- <a href="#deflateInit2">deflateInit2</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
- memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
parameter is invalid (such as an invalid
- method). <a href="#msg">msg</a> is set to null if there is no
error message. <a href="#deflateInit2">deflateInit2</a> does
- not perform any compression: this will be done by <a
href="#deflate">deflate</a>().<p>
-
-<font color="Blue"><dt> int <a
name="deflateSetDictionary">deflateSetDictionary</a> (<a
href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt
dictLength);</font>
-<dd>
- Initializes the compression dictionary from the given byte sequence
- without producing any compressed output. This function must be called
- immediately after <a href="#deflateInit">deflateInit</a>, <a
href="#deflateInit2">deflateInit2</a> or <a
href="#deflateReset">deflateReset</a>, before any
- call of <a href="#deflate">deflate</a>. The compressor and
decompressor must use exactly the same
- dictionary (see <a
href="#inflateSetDictionary">inflateSetDictionary</a>).<p>
-
- The dictionary should consist of strings (byte sequences) that are likely
- to be encountered later in the data to be compressed, with the most commonly
- used strings preferably put towards the end of the dictionary. Using a
- dictionary is most useful when the data to be compressed is short and can be
- predicted with good accuracy ; the data can then be compressed better than
- with the default empty dictionary.<p>
-
- Depending on the size of the compression data structures selected by
- <a href="#deflateInit">deflateInit</a> or <a
href="#deflateInit2">deflateInit2</a>, a part of the dictionary may in
effect be
- discarded, for example if the dictionary is larger than the window size in
- <a href="#deflate">deflate</a> or deflate2. Thus the strings
most likely to be useful should be
- put at the end of the dictionary, not at the front.<p>
-
- Upon return of this function, strm-> <a
href="#adler">adler</a> is set to the Adler32 value
- of the dictionary ; the decompressor may later use this value to determine
- which dictionary has been used by the compressor. (The Adler32 value
- applies to the whole dictionary even if only a subset of the dictionary is
- actually used by the compressor.)<p>
-
- <a href="#deflateSetDictionary">deflateSetDictionary</a>
returns <a href="#Z_OK">Z_OK</a> if success, or <a
href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
- parameter is invalid (such as NULL dictionary) or the stream <a
href="#state">state</a> is
- inconsistent (for example if <a href="#deflate">deflate</a> has
already been called for this stream
- or if the compression method is bsort). <a
href="#deflateSetDictionary">deflateSetDictionary</a> does not
- perform any compression: this will be done by <a
href="#deflate">deflate</a>().<p>
-
-<font color="Blue"><dt> int <a
name="deflateCopy">deflateCopy</a> (<a
href="#z_streamp">z_streamp</a> dest, <a
href="#z_streamp">z_streamp</a> source);</font>
-<dd>
- Sets the destination stream as a complete copy of the source stream.<p>
-
- This function can be useful when several compression strategies will be
- tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
- by calling <a href="#deflateEnd">deflateEnd</a>. Note that
<a href="#deflateCopy">deflateCopy</a> duplicates the internal
- compression <a href="#state">state</a> which can be quite large,
so this strategy is slow and
- can consume lots of memory.<p>
-
- <a href="#deflateCopy">deflateCopy</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
- enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if
the source stream <a href="#state">state</a> was inconsistent
- (such as <a href="#zalloc">zalloc</a> being NULL). <a
href="#msg">msg</a> is left unchanged in both source and
- destination.<p>
-
-<font color="Blue"><dt> int <a
name="deflateReset">deflateReset</a> (<a
href="#z_streamp">z_streamp</a> strm);</font>
-<dd> This function is equivalent to <a
href="#deflateEnd">deflateEnd</a> followed by <a
href="#deflateInit">deflateInit</a>,
- but does not free and reallocate all the internal compression <a
href="#state">state</a>.
- The stream will keep the same compression level and any other attributes
- that may have been set by <a
href="#deflateInit2">deflateInit2</a>.<p>
-
- <a href="#deflateReset">deflateReset</a> returns <a
href="#Z_OK">Z_OK</a> if success, or <a
href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
- stream <a href="#state">state</a> was inconsistent (such as
<a href="#zalloc">zalloc</a> or <a
href="#state">state</a> being NULL).<p>
-
-<font color="Blue"><dt> int <a
name="deflateParams">deflateParams</a> (<a
href="#z_streamp">z_streamp</a> strm, int level, int
strategy);</font>
-<dd>
- Dynamically update the compression level and compression strategy. The
- interpretation of level and strategy is as in <a
href="#deflateInit2">deflateInit2</a>. This can be
- used to switch between compression and straight copy of the input data, or
- to switch to a different kind of input data requiring a different
- strategy. If the compression level is changed, the input available so far
- is compressed with the old level (and may be flushed); the new level will
- take effect only at the next call of <a
href="#deflate">deflate</a>().<p>
-
- Before the call of <a href="#deflateParams">deflateParams</a>,
the stream <a href="#state">state</a> must be set as for
- a call of <a href="#deflate">deflate</a>(), since the currently
available input may have to
- be compressed and flushed. In particular, strm-> <a
href="#avail_out">avail_out</a> must be
- non-zero.<p>
-
- <a href="#deflateParams">deflateParams</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
- stream <a href="#state">state</a> was inconsistent or if a
parameter was invalid, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
- if strm->avail_out was zero.<p>
-
-<font color="Blue"><dt> int <a
name="inflateInit2">inflateInit2</a> (<a
href="#z_streamp">z_streamp</a> strm, int windowBits);</font>
-
-<dd> This is another version of <a
href="#inflateInit">inflateInit</a> with an extra parameter. The
- fields <a href="#next_in">next_in</a>, <a
href="#avail_in">avail_in</a>, <a
href="#zalloc">zalloc</a>, <a
href="#zfree">zfree</a> and <a
href="#opaque">opaque</a> must be initialized
- before by the caller.<p>
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library. The default value is 15 if <a
href="#inflateInit">inflateInit</a> is used
- instead. If a compressed stream with a larger window size is given as
- input, <a href="#inflate">inflate</a>() will return with the
error code <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> instead of
- trying to allocate a larger window.<p>
-
- <a href="#inflateInit2">inflateInit2</a> returns <a
href="#Z_OK">Z_OK</a> if success, <a
href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
- memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
parameter is invalid (such as a negative
- memLevel). <a href="#msg">msg</a> is set to null if there is no
error message. <a href="#inflateInit2">inflateInit2</a>
- does not perform any decompression apart from reading the zlib header if
- present: this will be done by <a href="#inflate">inflate</a>().
(So <a href="#next_in">next_in</a> and <a
href="#avail_in">avail_in</a> may be
- modified, but <a href="#next_out">next_out</a> and <a
href="#avail_out">avail_out</a> are unchanged.)<p>
-
-<font color="Blue"><dt> int <a
name="inflateSetDictionary">inflateSetDictionary</a> (<a
href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt
dictLength);</font>
-<dd>
- Initializes the decompression dictionary from the given uncompressed byte
- sequence. This function must be called immediately after a call of <a
href="#inflate">inflate</a>
- if this call returned <a href="#Z_NEED_DICT">Z_NEED_DICT</a>.
The dictionary chosen by the compressor
- can be determined from the Adler32 value returned by this call of
- <a href="#inflate">inflate</a>. The compressor and decompressor
must use exactly the same
- dictionary (see <a
href="#deflateSetDictionary">deflateSetDictionary</a>).<p>
-
- <a href="#inflateSetDictionary">inflateSetDictionary</a>
returns <a href="#Z_OK">Z_OK</a> if success, <a
href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
- parameter is invalid (such as NULL dictionary) or the stream <a
href="#state">state</a> is
- inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the
given dictionary doesn't match the
- expected one (incorrect Adler32 value). <a
href="#inflateSetDictionary">inflateSetDictionary</a> does not
- perform any decompression: this will be done by subsequent calls of
- <a href="#inflate">inflate</a>().<p>
-
-<font color="Blue"><dt> int <a
name="inflateSync">inflateSync</a> (<a
href="#z_streamp">z_streamp</a> strm);</font>
-
-<dd> Skips invalid compressed data until a full flush point (see above the
- description of <a href="#deflate">deflate</a> with <a
href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>) can be found, or until all
- available input is skipped. No output is provided.<p>
-
- <a href="#inflateSync">inflateSync</a> returns <a
href="#Z_OK">Z_OK</a> if a full flush point has been found, <a
href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
- if no more input was provided, <a
href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if no flush point has been
found,
- or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream
structure was inconsistent. In the success
- case, the application may save the current current value of <a
href="#total_in">total_in</a> which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call <a
href="#inflateSync">inflateSync</a>, providing more input each time,
- until success or end of the input data.<p>
-
-<font color="Blue"><dt> int <a
name="inflateReset">inflateReset</a> (<a
href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
- This function is equivalent to <a
href="#inflateEnd">inflateEnd</a> followed by <a
href="#inflateInit">inflateInit</a>,
- but does not free and reallocate all the internal decompression <a
href="#state">state</a>.
- The stream will keep attributes that may have been set by <a
href="#inflateInit2">inflateInit2</a>.
- <p>
-
- <a href="#inflateReset">inflateReset</a> returns <a
href="#Z_OK">Z_OK</a> if success, or <a
href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
- stream <a href="#state">state</a> was inconsistent (such as
<a href="#zalloc">zalloc</a> or <a
href="#state">state</a> being NULL).
- <p>
-</dl>
-
-<hr>
-<a name="Checksum functions"><h2> Checksum functions </h2>
- These functions are not related to compression but are exported
- anyway because they might be useful in applications using the
- compression library.
-<h3> Function list </h3>
-<ul>
-<li> uLong <a href="#adler32">adler32</a> (uLong <a
href="#adler">adler</a>, const Bytef *buf, uInt len);
-<li> uLong <a href="#crc32">crc32</a> (uLong crc, const
Bytef *buf, uInt len);
-</ul>
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt> uLong <a
name="adler32">adler32</a> (uLong <a
href="#adler">adler</a>, const Bytef *buf, uInt len);</font>
-<dd>
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- <p>
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
- <pre>
-
- uLong <a href="#adler">adler</a> = <a
href="#adler32">adler32</a>(0L, <a
href="#Z_NULL">Z_NULL</a>, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- <a href="#adler">adler</a> = <a
href="#adler32">adler32</a>(<a
href="#adler">adler</a>, buffer, length);
- }
- if (<a href="#adler">adler</a> != original_adler) error();
- </pre>
-
-<font color="Blue"><dt> uLong <a
name="crc32">crc32</a> (uLong crc, const Bytef *buf, uInt
len);</font>
-<dd>
- Update a running crc with the bytes buf[0..len-1] and return the updated
- crc. If buf is NULL, this function returns the required initial value
- for the crc. Pre- and post-conditioning (one's complement) is performed
- within this function so it shouldn't be done by the application.
- Usage example:
- <pre>
-
- uLong crc = <a href="#crc32">crc32</a>(0L, <a
href="#Z_NULL">Z_NULL</a>, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- crc = <a href="#crc32">crc32</a>(crc, buffer, length);
- }
- if (crc != original_crc) error();
- </pre>
-</dl>
-<hr>
-<a name="struct z_stream_s"><h2> struct z_stream_s </h2>
-<font color="Blue">
-<a name="z_stream_s">
-<pre>
-typedef struct z_stream_s {
- Bytef *<a name="next_in">next_in</a>; /* next input byte
*/
- uInt <a name="avail_in">avail_in</a>; /* number of bytes
available at <a href="#next_in">next_in</a> */
- uLong <a name="total_in">total_in</a>; /* total nb of input
bytes read so far */
-
- Bytef *<a name="next_out">next_out</a>; /* next output byte
should be put there */
- uInt <a name="avail_out">avail_out</a>; /* remaining free
space at <a href="#next_out">next_out</a> */
- uLong <a name="total_out">total_out</a>; /* total nb of
bytes output so far */
-
- char *<a name="msg">msg</a>; /* last error message,
NULL if no error */
- struct internal_state FAR *<a name="state">state</a>; /* not
visible by applications */
-
- alloc_func <a name="zalloc">zalloc</a>; /* used to allocate
the internal <a href="#state">state</a> */
- free_func <a name="zfree">zfree</a>; /* used to free the
internal <a href="#state">state</a> */
- voidpf <a name="opaque">opaque</a>; /* private data object
passed to <a href="#zalloc">zalloc</a> and <a
href="#zfree">zfree</a> */
-
- int <a name="data_type">data_type</a>; /* best guess about
the data type: ascii or binary */
- uLong <a name="adler">adler</a>; /* <a
href="#adler32">adler32</a> value of the uncompressed data */
- uLong <a name="reserved">reserved</a>; /* <a
href="#reserved">reserved</a> for future use */
-} <a href="#z_stream_s">z_stream</a> ;
-
-typedef <a href="#z_stream_s">z_stream</a> FAR * <a
name="z_streamp">z_streamp</a>; ΓΏ
-</pre>
-</font>
- The application must update <a href="#next_in">next_in</a> and
<a href="#avail_in">avail_in</a> when <a
href="#avail_in">avail_in</a> has
- dropped to zero. It must update <a href="#next_out">next_out</a>
and <a href="#avail_out">avail_out</a> when <a
href="#avail_out">avail_out</a>
- has dropped to zero. The application must initialize <a
href="#zalloc">zalloc</a>, <a
href="#zfree">zfree</a> and
- <a href="#opaque">opaque</a> before calling the init function.
All other fields are set by the
- compression library and must not be updated by the application. <p>
-
- The <a href="#opaque">opaque</a> value provided by the
application will be passed as the first
- parameter for calls of <a href="#zalloc">zalloc</a> and <a
href="#zfree">zfree</a>. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- <a href="#opaque">opaque</a> value. <p>
-
- <a href="#zalloc">zalloc</a> must return <a
href="#Z_NULL">Z_NULL</a> if there is not enough memory for the
object.
- If zlib is used in a multi-threaded application, <a
href="#zalloc">zalloc</a> and <a
href="#zfree">zfree</a> must be
- thread safe. <p>
-
- On 16-bit systems, the functions <a href="#zalloc">zalloc</a>
and <a href="#zfree">zfree</a> must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by <a href="#zalloc">zalloc</a> for objects of
exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
- <p>
-
- The fields <a href="#total_in">total_in</a> and <a
href="#total_out">total_out</a> can be used for statistics or
- progress reports. After compression, <a
href="#total_in">total_in</a> holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step). <p>
-
-<hr>
-<a name="Constants"><h2> Constants </h2>
-<font color="Blue">
-<pre>
-#define <a name="Z_NO_FLUSH">Z_NO_FLUSH</a> 0
-#define <a name="Z_PARTIAL_FLUSH">Z_PARTIAL_FLUSH</a> 1
- /* will be removed, use <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>
instead */
-#define <a name="Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> 2
-#define <a name="Z_FULL_FLUSH">Z_FULL_FLUSH</a> 3
-#define <a name="Z_FINISH">Z_FINISH</a> 4
-/* Allowed flush values ; see <a href="#deflate">deflate</a>()
below for details */
-
-#define <a name="Z_OK">Z_OK</a> 0
-#define <a name="Z_STREAM_END">Z_STREAM_END</a> 1
-#define <a name="Z_NEED_DICT">Z_NEED_DICT</a> 2
-#define <a name="Z_ERRNO">Z_ERRNO</a> (-1)
-#define <a name="Z_STREAM_ERROR">Z_STREAM_ERROR</a> (-2)
-#define <a name="Z_DATA_ERROR">Z_DATA_ERROR</a> (-3)
-#define <a name="Z_MEM_ERROR">Z_MEM_ERROR</a> (-4)
-#define <a name="Z_BUF_ERROR">Z_BUF_ERROR</a> (-5)
-#define <a name="Z_VERSION_ERROR">Z_VERSION_ERROR</a> (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define <a name="Z_NO_COMPRESSION">Z_NO_COMPRESSION</a> 0
-#define <a name="Z_BEST_SPEED">Z_BEST_SPEED</a> 1
-#define <a name="Z_BEST_COMPRESSION">Z_BEST_COMPRESSION</a>
9
-#define <a name="Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>
(-1)
-/* compression levels */
-
-#define <a name="Z_FILTERED">Z_FILTERED</a> 1
-#define <a name="Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> 2
-#define <a name="Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> 0
-/* compression strategy ; see <a
href="#deflateInit2">deflateInit2</a>() below for details */
-
-#define <a name="Z_BINARY">Z_BINARY</a> 0
-#define <a name="Z_ASCII">Z_ASCII</a> 1
-#define <a name="Z_UNKNOWN">Z_UNKNOWN</a> 2
-/* Possible values of the <a href="#data_type">data_type</a> field
*/
-
-#define <a name="Z_DEFLATED">Z_DEFLATED</a> 8
-/* The <a href="#deflate">deflate</a> compression method (the only
one supported in this version) */
-
-#define <a name="Z_NULL">Z_NULL</a> 0 /* for initializing <a
href="#zalloc">zalloc</a>, <a
href="#zfree">zfree</a>, <a
href="#opaque">opaque</a> */
-
-#define <a name="zlib_version">zlib_version</a> <a
href="#zlibVersion">zlibVersion</a>()
-/* for compatibility with versions less than 1.0.2 */
-</pre>
-</font>
-
-<hr>
-<a name="Misc"><h2> Misc </h2>
- <a href="#deflateInit">deflateInit</a> and <a
href="#inflateInit">inflateInit</a> are macros to allow checking the
zlib version
- and the compiler's view of <a
href="#z_stream_s">z_stream</a>.
- <p>
- Other functions:
- <dl>
- <font color="Blue"><dt> const char * <a
name="zError">zError</a> (int err);</font>
- <font color="Blue"><dt> int <a
name="inflateSyncPoint">inflateSyncPoint</a> (<a
href="#z_streamp">z_streamp</a> z);</font>
- <font color="Blue"><dt> const uLongf * <a
name="get_crc_table">get_crc_table</a> (void);</font>
- </dl>
- <hr>
- <font size="-1">
- Last update: Wed Oct 13 20:42:34 1999<br>
- piapi(a)csie.ntu.edu.tw
- </font>
-
-</body>
-</html>