[ros-diffs] [cfinck] 32790: - Remove much deprecated code for the mouse initialization (had been imported from the ancient psaux.sys driver, which was removed in _r14938_) Do a much simpler initialization instead: * The "Get ID" command was used for detecting whether a mouse is present. But it just handled normal mice, IntelliMice and IntelliMice Explorer, although there can be many more possible values for other mice. (see for example http://www.win.tue.nl/~aeb/linux/kbd/scancodes-13.html#mcf2). Also this

Author: cfinck
Date: Mon Mar 31 07:40:31 2008
New Revision: 32790

URL: http://svn.reactos.org/svn/reactos?rev=32790&view=rev
Log:
- Remove much deprecated code for the mouse initialization (had been imported from the
ancient psaux.sys driver, which was removed in _r14938_)
  Do a much simpler initialization instead:
    * The "Get ID" command was used for detecting whether a mouse is present.
      But it just handled normal mice, IntelliMice and IntelliMice Explorer, although
there can be many more possible values for other mice. (see for example
http://www.win.tue.nl/~aeb/linux/kbd/scancodes-13.html#mcf2).
      Also this command isn't available on all systems.
      Furthermore we already do a MOUSE_LINE_TEST in i8042BasicDetect, which is the more
reliable method to test whether a mouse is plugged in. Therefore this "Get ID"
command can be simply removed.
    * The whole mouse initialization process now boils down to enabling the mouse itself
and in the controller
    * All in all, some more mice should be detected now.
- Give i8042IsrWritePort a boolean return value and pass the results of the i8042Write
calls
- Replace two i8042Write calls for writing to the mouse by one i8042IsrWritePort call
where possible
- Remove the unused KBD_LINE_TEST define

This change was tested under QEMU, VMware and on one real system.

Modified:
    trunk/reactos/drivers/input/i8042prt/i8042prt.h
    trunk/reactos/drivers/input/i8042prt/mouse.c
    trunk/reactos/drivers/input/i8042prt/pnp.c
    trunk/reactos/drivers/input/i8042prt/readwrite.c

Modified: trunk/reactos/drivers/input/i8042prt/i8042prt.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/input/i8042prt/i80…
==============================================================================
--- trunk/reactos/drivers/input/i8042prt/i8042prt.h [iso-8859-1] (original)
+++ trunk/reactos/drivers/input/i8042prt/i8042prt.h [iso-8859-1] Mon Mar 31 07:40:31 2008
@@ -224,7 +224,7 @@
 
 #define KBD_READ_MODE      0x20
 #define KBD_WRITE_MODE     0x60
-#define KBD_LINE_TEST      0xAB
+#define MOUSE_ENAB         0xA8
 #define MOUSE_LINE_TEST    0xA9
 #define CTRL_SELF_TEST     0xAA
 #define CTRL_WRITE_MOUSE   0xD4
@@ -277,7 +277,7 @@
  * Mouse commands
  * --------------------------------------------------*/
 
-#define MOU_CMD_GET_ID     0xF2
+#define MOU_ENAB           0xF4
 #define MOU_CMD_RESET      0xFF
 
 /*-----------------------------------------------------
@@ -389,7 +389,7 @@
 i8042Flush(
 	IN PPORT_DEVICE_EXTENSION DeviceExtension);
 
-VOID
+BOOLEAN
 i8042IsrWritePort(
 	IN PPORT_DEVICE_EXTENSION DeviceExtension,
 	IN UCHAR Value,

Modified: trunk/reactos/drivers/input/i8042prt/mouse.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/input/i8042prt/mou…
==============================================================================
--- trunk/reactos/drivers/input/i8042prt/mouse.c [iso-8859-1] (original)
+++ trunk/reactos/drivers/input/i8042prt/mouse.c [iso-8859-1] Mon Mar 31 07:40:31 2008
@@ -7,6 +7,7 @@
                 Copyright Jason Filby (jasonfilby(a)yahoo.com)
                 Copyright Martijn Vernooij (o112w8r02(a)sneakemail.com)
                 Copyright 2006-2007 Hervé Poussineau (hpoussin(a)reactos.org)
+                Copyright 2008 Colin Finck (mail(a)colinfinck.de)
  */
 
 /* INCLUDES ****************************************************************/
@@ -211,8 +212,6 @@
 		(DeviceExtension->MouseButtonState & ~Mask) | (NewButtonData & Mask);
 }
 
-static NTSTATUS OldInitialization(PPORT_DEVICE_EXTENSION); /* FIXME */
-
 /* Does lastest initializations for the mouse. This method
  * is called just before connecting the interrupt.
  */
@@ -220,13 +219,34 @@
 i8042MouInitialize(
 	IN PI8042_MOUSE_EXTENSION DeviceExtension)
 {
-	PPORT_DEVICE_EXTENSION PortDeviceExtension;
-
-	PortDeviceExtension = DeviceExtension->Common.PortDeviceExtension;
-
-/* FIXME */ OldInitialization(PortDeviceExtension);
-
-	return STATUS_SUCCESS;
+	NTSTATUS Status;
+	UCHAR Value;
+
+	/* Enable the PS/2 mouse port */
+	i8042Write(DeviceExtension->Common.PortDeviceExtension,
DeviceExtension->Common.PortDeviceExtension->ControlPort, MOUSE_ENAB);
+
+	/* Enable the mouse */
+	if(!i8042IsrWritePort(DeviceExtension->Common.PortDeviceExtension, MOU_ENAB,
CTRL_WRITE_MOUSE))
+	{
+		WARN_(I8042PRT, "Failed to enable mouse!\n");
+		return STATUS_IO_DEVICE_ERROR;
+	}
+
+	Status = i8042ReadDataWait(DeviceExtension->Common.PortDeviceExtension, &Value);
+	if (!NT_SUCCESS(Status))
+	{
+		WARN_(I8042PRT, "Failed to read the response of MOU_ENAB, status 0x%08lx\n",
Status);
+		return Status;
+	}
+
+	if(Value == MOUSE_ACK)
+	{
+		INFO_(I8042PRT, "Mouse was enabled successfully!\n");
+		return STATUS_SUCCESS;
+	}
+
+	WARN_(I8042PRT, "Got 0x%02x instead of 0xFA\n", Value);
+	return STATUS_IO_DEVICE_ERROR;
 }
 
 static VOID NTAPI
@@ -875,182 +895,3 @@
 
 	return TRUE;
 }
-
-/****************************************************************************************
- * WARNING: the mouse initialization code has been taken from old ReactOS mouse driver,
*
- * named psaux.sys, which has been deleted in revision 14938.                          
*
- * Coding style and structures are not exactly the same as in the other parts of the   
*
- * i8042prt driver, but code is supposed to work.                                      
*
-
****************************************************************************************/
-
-#define CONTROLLER_COMMAND_MOUSE_ENABLE 0xA8
-#define PSMOUSE_CMD_ENABLE              0x00f4
-#define PSMOUSE_CMD_GETID               (0x0200 | MOU_CMD_GET_ID)
-#define PSMOUSE_CMD_RESET_BAT           (0x0200 | MOU_CMD_RESET)
-#define PSMOUSE_RET_ACK                 MOUSE_ACK
-#define PSMOUSE_RET_NAK                 MOUSE_NACK
-
-typedef struct _I8042_MOUSE_EXTENSION_OLD
-{
-	PPORT_DEVICE_EXTENSION PortDeviceExtension;
-	UCHAR pkt[8];
-	UCHAR ack;
-	ULONG RepliesExpected;
-} I8042_MOUSE_EXTENSION_OLD, *PI8042_MOUSE_EXTENSION_OLD;
-
-/* Sends a byte to the mouse */
-static INT SendByte(
-	IN PI8042_MOUSE_EXTENSION_OLD DeviceExtension,
-	IN UCHAR byte)
-{
-	INT timeout = 100; /* 100 msec */
-	UCHAR scancode;
-	LARGE_INTEGER Millisecond_Timeout;
-
-	Millisecond_Timeout.QuadPart = -10000L;
-
-	DeviceExtension->ack = 0;
-
-	i8042IsrWritePort(DeviceExtension->PortDeviceExtension, byte, CTRL_WRITE_MOUSE);
-	while ((DeviceExtension->ack == 0) && timeout--)
-	{
-		if (i8042ReadKeyboardData(DeviceExtension->PortDeviceExtension, &scancode))
-		{
-			switch(scancode)
-			{
-				case PSMOUSE_RET_ACK:
-					DeviceExtension->ack = 1;
-					break;
-				case PSMOUSE_RET_NAK:
-					DeviceExtension->ack = -1;
-					break;
-				default:
-					DeviceExtension->ack = 1; /* Workaround for mice which don't ACK the Get ID
command */
-					if (DeviceExtension->RepliesExpected)
-						DeviceExtension->pkt[--DeviceExtension->RepliesExpected] = scancode;
-					break;
-			}
-			return (INT)(-(DeviceExtension->ack <= 0));
-		}
-		KeDelayExecutionThread(KernelMode, FALSE, &Millisecond_Timeout);
-	}
-	return (INT)(-(DeviceExtension->ack <= 0));
-}
-
-/* Send a PS/2 command to the mouse. */
-static INT SendCommand(
-	IN PI8042_MOUSE_EXTENSION_OLD DeviceExtension,
-	IN PUCHAR param,
-	IN INT command)
-{
-	LARGE_INTEGER Millisecond_Timeout;
-	UCHAR scancode;
-	INT timeout = 500; /* 500 msec */
-	UCHAR send = (command >> 12) & 0xf;
-	UCHAR receive = (command >> 8) & 0xf;
-	UCHAR i;
-
-	Millisecond_Timeout.QuadPart = -10000L;
-
-	DeviceExtension->RepliesExpected = receive;
-	if (command == PSMOUSE_CMD_RESET_BAT)
-		timeout = 2000; /* 2 sec */
-
-	if (command & 0xff)
-		if (SendByte(DeviceExtension, command & 0xff))
-			return (INT)(DeviceExtension->RepliesExpected = 0) - 1;
-
-	for (i = 0; i < send; i++)
-		if (SendByte(DeviceExtension, param[i]))
-			return (INT)(DeviceExtension->RepliesExpected = 0) - 1;
-
-	while (DeviceExtension->RepliesExpected && timeout--)
-	{
-		if (DeviceExtension->RepliesExpected == 1 && command ==
PSMOUSE_CMD_RESET_BAT)
-			timeout = 100;
-
-		if (DeviceExtension->RepliesExpected == 1 && command == PSMOUSE_CMD_GETID
&&
-			DeviceExtension->pkt[1] != 0xab && DeviceExtension->pkt[1] != 0xac)
-		{
-			DeviceExtension->RepliesExpected = 0;
-			break;
-		}
-
-		if (i8042ReadKeyboardData(DeviceExtension->PortDeviceExtension, &scancode))
-		{
-			DeviceExtension->pkt[--DeviceExtension->RepliesExpected] = scancode;
-		}
-
-		KeDelayExecutionThread (KernelMode, FALSE, &Millisecond_Timeout);
-	}
-
-	for (i = 0; i < receive; i++)
-		param[i] = DeviceExtension->pkt[(receive - 1) - i];
-
-	if (DeviceExtension->RepliesExpected)
-		return (int)(DeviceExtension->RepliesExpected = 0) - 1;
-
-	return 0;
-}
-
-/* Detect if mouse is just a standard ps/2 mouse */
-static BOOLEAN TestMouse(
-	IN PI8042_MOUSE_EXTENSION_OLD DeviceExtension)
-{
-	UCHAR param[4];
-
-	param[0] = param[1] = 0xa5;
-
-	/*
-	 * First, we check if it's a mouse. It should send 0x00 or 0x03
-	 * in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer.
-	 */
-	if(SendCommand(DeviceExtension, param, PSMOUSE_CMD_GETID))
-		return -1;
-
-	if(param[0] != 0x00 && param[0] != 0x03 && param[0] != 0x04)
-		return -1;
-
-	/*
-	 * Then we reset and disable the mouse so that it doesn't generate events.
-	 */
-
-	return TRUE;
-}
-
-/* Initialize the PS/2 mouse support */
-static BOOLEAN SetupMouse(
-	IN PI8042_MOUSE_EXTENSION_OLD DeviceExtension)
-{
-	LARGE_INTEGER Millisecond_Timeout;
-
-	Millisecond_Timeout.QuadPart = -10000L;
-
-	/* setup */
-	DeviceExtension->RepliesExpected = 0;
-	DeviceExtension->ack = 0;
-
-	/* Enable the PS/2 mouse port */
-	i8042Write(DeviceExtension->PortDeviceExtension,
DeviceExtension->PortDeviceExtension->ControlPort,
CONTROLLER_COMMAND_MOUSE_ENABLE);
-
-	if (TestMouse(DeviceExtension))
-	{
-		TRACE_(I8042PRT, "Detected Mouse\n");
-
-		if (SendCommand(DeviceExtension, NULL, PSMOUSE_CMD_ENABLE))
-			WARN_(I8042PRT, "Failed to enable mouse!\n");
-	}
-
-	return TRUE;
-}
-
-static NTSTATUS OldInitialization(
-	IN PPORT_DEVICE_EXTENSION PortDeviceExtension)
-{
-	I8042_MOUSE_EXTENSION_OLD DeviceExtension;
-
-	RtlZeroMemory(&DeviceExtension, sizeof(I8042_MOUSE_EXTENSION_OLD));
-	DeviceExtension.PortDeviceExtension = PortDeviceExtension;
-	SetupMouse(&DeviceExtension);
-	return STATUS_SUCCESS;
-}

Modified: trunk/reactos/drivers/input/i8042prt/pnp.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/input/i8042prt/pnp…
==============================================================================
--- trunk/reactos/drivers/input/i8042prt/pnp.c [iso-8859-1] (original)
+++ trunk/reactos/drivers/input/i8042prt/pnp.c [iso-8859-1] Mon Mar 31 07:40:31 2008
@@ -179,8 +179,7 @@
 
 	i8042Flush(DeviceExtension);
 
-	if (!i8042Write(DeviceExtension, DeviceExtension->ControlPort, CTRL_WRITE_MOUSE)
-	  ||!i8042Write(DeviceExtension, DeviceExtension->DataPort, MOU_CMD_RESET))
+	if(!i8042IsrWritePort(DeviceExtension, MOU_CMD_RESET, CTRL_WRITE_MOUSE))
 	{
 		WARN_(I8042PRT, "Failed to write reset command to mouse\n");
 		goto failure;
@@ -383,10 +382,7 @@
 		KIRQL Irql;
 
 		Irql = KeAcquireInterruptSpinLock(DeviceExtension->HighestDIRQLInterrupt);
-
-		i8042Write(DeviceExtension, DeviceExtension->ControlPort, CTRL_WRITE_MOUSE);
-		i8042Write(DeviceExtension, DeviceExtension->DataPort, MOU_CMD_RESET);
-
+		i8042IsrWritePort(DeviceExtension, MOU_CMD_RESET, CTRL_WRITE_MOUSE);
 		KeReleaseInterruptSpinLock(DeviceExtension->HighestDIRQLInterrupt, Irql);
 	}
 

Modified: trunk/reactos/drivers/input/i8042prt/readwrite.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/input/i8042prt/rea…
==============================================================================
--- trunk/reactos/drivers/input/i8042prt/readwrite.c [iso-8859-1] (original)
+++ trunk/reactos/drivers/input/i8042prt/readwrite.c [iso-8859-1] Mon Mar 31 07:40:31
2008
@@ -34,7 +34,7 @@
 	}
 }
 
-VOID
+BOOLEAN
 i8042IsrWritePort(
 	IN PPORT_DEVICE_EXTENSION DeviceExtension,
 	IN UCHAR Value,
@@ -42,9 +42,9 @@
 {
 	if (SelectCmd)
 		if (!i8042Write(DeviceExtension, DeviceExtension->ControlPort, SelectCmd))
-			return;
-
-	i8042Write(DeviceExtension, DeviceExtension->DataPort, Value);
+			return FALSE;
+
+	return i8042Write(DeviceExtension, DeviceExtension->DataPort, Value);
 }
 
 /*