28 Nov
2008
28 Nov
'08
9:02 a.m.
Author: dreimer
Date: Fri Nov 28 03:02:24 2008
New Revision: 37700
URL: http://svn.reactos.org/svn/reactos?rev=37700&view=rev
Log:
Update UniATA to Version 0.39j Credits go to Samuel Serapion
Modified:
trunk/reactos/drivers/storage/ide/uniata/atapi.h
trunk/reactos/drivers/storage/ide/uniata/bm_devs.h
trunk/reactos/drivers/storage/ide/uniata/bsmaster.h
trunk/reactos/drivers/storage/ide/uniata/id_ata.cpp
trunk/reactos/drivers/storage/ide/uniata/id_dma.cpp
trunk/reactos/drivers/storage/ide/uniata/id_init.cpp
trunk/reactos/drivers/storage/ide/uniata/id_probe.cpp
trunk/reactos/drivers/storage/ide/uniata/id_sata.cpp
trunk/reactos/drivers/storage/ide/uniata/idedma.rc
trunk/reactos/drivers/storage/ide/uniata/inc/CrossNt.h
trunk/reactos/drivers/storage/ide/uniata/ntddk_ex.h
trunk/reactos/drivers/storage/ide/uniata/uniata.rbuild
trunk/reactos/drivers/storage/ide/uniata/uniata_ver.h
Modified: trunk/reactos/drivers/storage/ide/uniata/atapi.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/atapi.h [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/atapi.h [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -137,10 +137,6 @@
#endif // _DBGNT_
#else // _DEBUG
-
-#ifdef KdPrint
-#undef KdPrint
-#endif
#define PRINT_PREFIX "UniATA: "
@@ -944,6 +940,30 @@
ULONG DeviceNumber
);
+/*#define IdeHardReset(BaseIoAddress,result) \
+{\
+ UCHAR statusByte;\
+ ULONG i;\
+ SelectDrive(BaseIoAddress,DeviceNumber); \
+ AtapiWritePort1(&BaseIoAddress->AltStatus,IDE_DC_DISABLE_INTERRUPTS |
IDE_DC_RESET_CONTROLLER );\
+ ScsiPortStallExecution(50 * 1000);\
+ AtapiWritePort1(&BaseIoAddress->AltStatus,IDE_DC_REENABLE_CONTROLLER);\
+ 5 seconds for reset \
+ for (i = 0; i < 1000 * (1+11); i++) {\
+ statusByte = AtapiReadPort1(&BaseIoAddress->AltStatus);\
+ if (statusByte != IDE_STATUS_IDLE && statusByte != IDE_STATUS_SUCCESS)
{\
+ ScsiPortStallExecution((i<1000) ? 5 : 500);\
+ } else {\
+ break;\
+ }\
+ }\
+ KdPrint2((PRINT_PREFIX "IdeHardReset: Status %x\n", statusByte)); \
+ if (i == 1000*1000) {\
+ result = FALSE;\
+ }\
+ result = TRUE;\
+}*/
+
#endif //USER_MODE
#define IS_RDP(OperationCode)\
@@ -1129,7 +1149,7 @@
IN UCHAR command,
IN USHORT cylinder,
IN UCHAR head,
- IN UCHAR sector,
+ IN UCHAR sector,
IN UCHAR count,
IN UCHAR feature,
IN ULONG flags
@@ -1152,8 +1172,7 @@
IN PVOID SystemArgument2
);
-
-//#define AtaCommand(de, devn, chan, cmd, cyl, hd, sec, cnt, feat, flg)
+//#define AtaCommand(de, devn, chan, cmd, cyl, hd, sec, cnt, feat, flg)
extern LONG
AtaPio2Mode(LONG pio);
Modified: trunk/reactos/drivers/storage/ide/uniata/bm_devs.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/bm_devs.h [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/bm_devs.h [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -132,6 +132,7 @@
#define ATA_AMD766 0x74111022
#define ATA_AMD768 0x74411022
#define ATA_AMD8111 0x74691022
+#define ATA_AMD5536 0x209a1022
#define ATA_ACER_LABS_ID 0x10b9
#define ATA_ALI_1533 0x153310b9
@@ -144,10 +145,17 @@
#define ATA_ATI_ID 0x1002
#define ATA_ATI_IXP200 0x43491002
#define ATA_ATI_IXP300 0x43691002
+#define ATA_ATI_IXP300_S1 0x436e1002
#define ATA_ATI_IXP400 0x43761002
-#define ATA_ATI_IXP300_S1 0x436e1002
#define ATA_ATI_IXP400_S1 0x43791002
#define ATA_ATI_IXP400_S2 0x437a1002
+#define ATA_ATI_IXP600 0x438c1002
+#define ATA_ATI_IXP600_S1 0x43801002
+#define ATA_ATI_IXP700 0x439c1002
+#define ATA_ATI_IXP700_S1 0x43901002
+
+#define ATA_CENATEK_ID 0x16ca
+#define ATA_CENATEK_ROCKET 0x000116ca
#define ATA_CYRIX_ID 0x1078
#define ATA_CYRIX_5530 0x01021078
@@ -187,6 +195,11 @@
#define ATA_I6300ESB 0x25a28086
#define ATA_I6300ESB_1 0x25a38086
#define ATA_I6300ESB_2 0x25b08086
+#define ATA_I63XXESB2 0x269e8086
+#define ATA_I63XXESB2_S1 0x26808086
+#define ATA_I63XXESB2_S2 0x26818086
+#define ATA_I63XXESB2_R1 0x26828086
+#define ATA_I63XXESB2_R2 0x26838086
#define ATA_I82801FB 0x266f8086
#define ATA_I82801FB_S1 0x26518086
#define ATA_I82801FB_R1 0x26528086
@@ -197,6 +210,20 @@
#define ATA_I82801GB_AH 0x27c18086
#define ATA_I82801GB_M 0x27c58086
+#define ATA_MARVELL_ID 0x11ab
+#define ATA_M88SX5040 0x504011ab
+#define ATA_M88SX5041 0x504111ab
+#define ATA_M88SX5080 0x508011ab
+#define ATA_M88SX5081 0x508111ab
+#define ATA_M88SX6041 0x604111ab
+#define ATA_M88SX6081 0x608111ab
+#define ATA_M88SX6101 0x610111ab
+#define ATA_M88SX6145 0x614511ab
+
+#define ATA_MICRON_ID 0x1042
+#define ATA_MICRON_RZ1000 0x10001042
+#define ATA_MICRON_RZ1001 0x10011042
+
#define ATA_NATIONAL_ID 0x100b
#define ATA_SC1100 0x0502100b
@@ -206,17 +233,32 @@
#define ATA_NVIDIA_ID 0x10de
#define ATA_NFORCE1 0x01bc10de
#define ATA_NFORCE2 0x006510de
-#define ATA_NFORCE2_MCP 0x008510de
+#define ATA_NFORCE2_PRO 0x008510de
+#define ATA_NFORCE2_PRO_S1 0x008e10de
#define ATA_NFORCE3 0x00d510de
#define ATA_NFORCE3_PRO 0x00e510de
#define ATA_NFORCE3_PRO_S1 0x00e310de
#define ATA_NFORCE3_PRO_S2 0x00ee10de
-#define ATA_NFORCE3_MCP 0x003510de
-#define ATA_NFORCE3_MCP_S1 0x003610de
-#define ATA_NFORCE3_MCP_S2 0x003e10de
-#define ATA_NFORCE4 0x005310de
-#define ATA_NFORCE4_S1 0x005410de
-#define ATA_NFORCE4_S2 0x005510de
+#define ATA_NFORCE_MCP04 0x003510de
+#define ATA_NFORCE_MCP04_S1 0x003610de
+#define ATA_NFORCE_MCP04_S2 0x003e10de
+#define ATA_NFORCE_CK804 0x005310de
+#define ATA_NFORCE_CK804_S1 0x005410de
+#define ATA_NFORCE_CK804_S2 0x005510de
+#define ATA_NFORCE_MCP51 0x026510de
+#define ATA_NFORCE_MCP51_S1 0x026610de
+#define ATA_NFORCE_MCP51_S2 0x026710de
+#define ATA_NFORCE_MCP55 0x036e10de
+#define ATA_NFORCE_MCP55_S1 0x037e10de
+#define ATA_NFORCE_MCP55_S2 0x037f10de
+#define ATA_NFORCE_MCP61 0x03ec10de
+#define ATA_NFORCE_MCP61_S1 0x03e710de
+#define ATA_NFORCE_MCP61_S2 0x03f610de
+#define ATA_NFORCE_MCP61_S3 0x03f710de
+#define ATA_NFORCE_MCP65 0x044810de
+#define ATA_NFORCE_MCP67 0x056010de
+#define ATA_NFORCE_MCP73 0x056c10de
+#define ATA_NFORCE_MCP77 0x075910de
#define ATA_PROMISE_ID 0x105a
#define ATA_PDC20246 0x4d33105a
@@ -326,6 +368,8 @@
#define ATA_VIA8233C 0x31091106
#define ATA_VIA8235 0x31771106
#define ATA_VIA8237 0x32271106
+#define ATA_VIA8237A 0x05911106
+#define ATA_VIA8237S 0x53371106
#define ATA_VIA8251 0x33491106
#define ATA_VIA8361 0x31121106
#define ATA_VIA8363 0x03051106
@@ -466,13 +510,18 @@
PCI_DEV_HW_SPEC_BM( 7411, 1022, 0x00, ATA_UDMA5, "AMD 766" ,
AMDNVIDIA | AMDBUG ),
PCI_DEV_HW_SPEC_BM( 7441, 1022, 0x00, ATA_UDMA5, "AMD 768" ,
AMDNVIDIA ),
PCI_DEV_HW_SPEC_BM( 7469, 1022, 0x00, ATA_UDMA6, "AMD 8111" ,
AMDNVIDIA ),
+ PCI_DEV_HW_SPEC_BM( 209a, 1022, 0x00, ATA_UDMA5, "AMD CS5536" ,
AMDNVIDIA ),
PCI_DEV_HW_SPEC_BM( 4349, 1002, 0x00, ATA_UDMA5, "ATI IXP200" , 0
),
PCI_DEV_HW_SPEC_BM( 4369, 1002, 0x00, ATA_UDMA6, "ATI IXP300" , 0
),
PCI_DEV_HW_SPEC_BM( 4376, 1002, 0x00, ATA_UDMA6, "ATI IXP400" , 0
),
PCI_DEV_HW_SPEC_BM( 436e, 1002, 0x00, ATA_SA150, "ATI IXP300" ,
SIIMIO | UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( 4379, 1002, 0x00, ATA_SA150, "ATI IXP400" ,
SIIMIO | SIINOSATAIRQ | UNIATA_SATA ),
- PCI_DEV_HW_SPEC_BM( 437a, 1002, 0x00, ATA_SA150, "ATI IXP400" ,
SIIMIO | SIINOSATAIRQ | UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 437a, 1002, 0x00, ATA_SA300, "ATI IXP400" ,
SIIMIO | SIINOSATAIRQ | UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 438c, 1002, 0x00, ATA_UDMA6, "ATI IXP600" , 0
),
+ PCI_DEV_HW_SPEC_BM( 4380, 1002, 0x00, ATA_SA150, "ATI IXP600" ,
UNIATA_SATA | UNIATA_AHCI ),
+ PCI_DEV_HW_SPEC_BM( 439c, 1002, 0x00, ATA_UDMA6, "ATI IXP700" , 0
),
+ PCI_DEV_HW_SPEC_BM( 4390, 1002, 0x00, ATA_SA150, "ATI IXP700" ,
UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 0004, 1103, 0x05, ATA_UDMA6, "HighPoint HPT372" ,
HPT372 | 0x00 | UNIATA_RAID_CONTROLLER),
PCI_DEV_HW_SPEC_BM( 0004, 1103, 0x03, ATA_UDMA5, "HighPoint HPT370" ,
HPT370 | 0x00 | UNIATA_RAID_CONTROLLER),
@@ -525,13 +574,24 @@
PCI_DEV_HW_SPEC_BM( 2822, 8086, 0x00, ATA_SA300, "Intel ICH8" ,
UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 2824, 8086, 0x00, ATA_SA300, "Intel ICH8" ,
UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 2825, 8086, 0x00, ATA_SA300, "Intel ICH8" ,
UNIATA_SATA | UNIATA_AHCI ),
+// PCI_DEV_HW_SPEC_BM( 2828, 8086, 0x00, ATA_SA300, "Intel ICH8M" ,
UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 2829, 8086, 0x00, ATA_SA300, "Intel ICH8M" ,
UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 282a, 8086, 0x00, ATA_SA300, "Intel ICH8M" ,
UNIATA_SATA | UNIATA_AHCI ),
+// PCI_DEV_HW_SPEC_BM( 2850, 8086, 0x00, ATA_SA300, "Intel ICH8M" ,
UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( 2920, 8086, 0x00, ATA_SA300, "Intel ICH9" ,
UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 2926, 8086, 0x00, ATA_SA300, "Intel ICH9" ,
UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 2923, 8086, 0x00, ATA_SA300, "Intel ICH9" ,
UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 2922, 8086, 0x00, ATA_SA300, "Intel ICH9" ,
UNIATA_SATA | UNIATA_AHCI ),
// PCI_DEV_HW_SPEC_BM( 3200, 8086, 0x00, ATA_SA150, "Intel 31244" ,
UNIATA_SATA ),
+/*
+ PCI_DEV_HW_SPEC_BM( 5040, 11ab, 0x00, ATA_SA150, "Marvell 88SX5040" ,
UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 5041, 11ab, 0x00, ATA_SA150, "Marvell 88SX5041" ,
UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 5080, 11ab, 0x00, ATA_SA150, "Marvell 88SX5080" ,
UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 5081, 11ab, 0x00, ATA_SA150, "Marvell 88SX5081" ,
UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 6041, 11ab, 0x00, ATA_SA300, "Marvell 88SX6041" ,
UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 6081, 11ab, 0x00, ATA_SA300, "Marvell 88SX6081" ,
UNIATA_SATA ),*/
+ PCI_DEV_HW_SPEC_BM( 6101, 11ab, 0x00, ATA_UDMA6, "Marvell 88SX6101" , 0
),
+ PCI_DEV_HW_SPEC_BM( 6145, 11ab, 0x00, ATA_UDMA6, "Marvell 88SX6145" , 0
),
PCI_DEV_HW_SPEC_BM( 01bc, 10de, 0x00, ATA_UDMA5, "nVidia nForce" ,
AMDNVIDIA ),
PCI_DEV_HW_SPEC_BM( 0065, 10de, 0x00, ATA_UDMA6, "nVidia nForce2" ,
AMDNVIDIA ),
@@ -553,6 +613,14 @@
PCI_DEV_HW_SPEC_BM( 036e, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP55",
AMDNVIDIA ),
PCI_DEV_HW_SPEC_BM( 037e, 10de, 0x00, ATA_SA300, "nVidia nForce MCP55
S1",NV4OFF | NVQ | UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( 037f, 10de, 0x00, ATA_SA300, "nVidia nForce MCP55
S2",NV4OFF | NVQ | UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 03ec, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP61",
AMDNVIDIA ),
+ PCI_DEV_HW_SPEC_BM( 03e7, 10de, 0x00, ATA_SA300, "nVidia nForce MCP61
S1",NV4OFF | NVQ | UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 03f6, 10de, 0x00, ATA_SA300, "nVidia nForce MCP61
S2",NV4OFF | NVQ | UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 03f7, 10de, 0x00, ATA_SA300, "nVidia nForce MCP61
S3",NV4OFF | NVQ | UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 0448, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP65",
AMDNVIDIA ),
+ PCI_DEV_HW_SPEC_BM( 0560, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP67",
AMDNVIDIA ),
+ PCI_DEV_HW_SPEC_BM( 056c, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP73",
AMDNVIDIA ),
+ PCI_DEV_HW_SPEC_BM( 0759, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP77",
AMDNVIDIA ),
PCI_DEV_HW_SPEC_BM( 0502, 100b, 0x00, ATA_UDMA2, "National Geode SC1100", 0
),
@@ -667,11 +735,12 @@
PCI_DEV_HW_SPEC_BM( 3149, 1106, 0x00, ATA_SA150, "VIA 6420" , 0
| UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( 3249, 1106, 0x00, ATA_SA150, "VIA 6421" ,
VIABAR | UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( 0591, 1106, 0x00, ATA_SA150, "VIA 8237A" , 0
| UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 5337, 1106, 0x00, ATA_SA150, "VIA 8237S" , 0
| UNIATA_SATA ),
//PCI_DEV_HW_SPEC_BM( 3349, 1106, 0x00, ATA_SA150, "VIA 8251" ,
VIAAHCI| UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( c693, 1080, 0x00, ATA_WDMA2, "Cypress 82C693" ,0
),
-/*
+/*
PCI_DEV_HW_SPEC_BM( 4d68, 105a, 0, 0, "Promise TX2 ATA-100 controller",
UNIATA_RAID_CONTROLLER),
PCI_DEV_HW_SPEC_BM( 6268, 105a, 0, 0, "Promise TX2 ATA-100 controller",
UNIATA_RAID_CONTROLLER),
Modified: trunk/reactos/drivers/storage/ide/uniata/bsmaster.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/bsmaster.h [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/bsmaster.h [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -1,6 +1,6 @@
/*++
-Copyright (c) 2002-2005 Alexandr A. Telyatnikov (Alter)
+Copyright (c) 2002-2008 Alexandr A. Telyatnikov (Alter)
Module Name:
bsmaster.h
@@ -31,7 +31,7 @@
Revision History:
Code was created by
- Alter, Copyright (c) 2002-2007
+ Alter, Copyright (c) 2002-2008
Some definitions were taken from FreeBSD 4.3-4.6 ATA driver by
Søren Schmidt, Copyright (c) 1998,1999,2000,2001
@@ -520,6 +520,8 @@
} IDE_AHCI_PORT_REGISTERS, *PIDE_AHCI_PORT_REGISTERS;
+#define IDX_AHCI_P_CLB (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, CLB))
+#define IDX_AHCI_P_FB (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, FB))
#define IDX_AHCI_P_IS (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, IS))
#define IDX_AHCI_P_CI (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, CI))
@@ -544,6 +546,7 @@
} IDE_AHCI_PRD_ENTRY, *PIDE_AHCI_PRD_ENTRY;
#define ATA_AHCI_DMA_ENTRIES (PAGE_SIZE/2/sizeof(IDE_AHCI_PRD_ENTRY)) /* 128 */
+#define ATA_AHCI_MAX_TAGS 32
typedef struct _IDE_AHCI_CMD {
UCHAR cfis[64];
@@ -557,7 +560,21 @@
USHORT prd_length; /* PRD entries */
ULONG bytecount;
ULONGLONG cmd_table_phys; /* 128byte aligned */
+ ULONG Reserved[4];
} IDE_AHCI_CMD_LIST, *PIDE_AHCI_CMD_LIST;
+
+typedef struct _IDE_AHCI_RCV_FIS {
+ UCHAR dsfis[28];
+ UCHAR Reserved1[4];
+ UCHAR psfis[24];
+ UCHAR Reserved2[8];
+ UCHAR rfis[24];
+ UCHAR Reserved3[4];
+ ULONG SDBFIS;
+ UCHAR ufis[64];
+ UCHAR Reserved4[96];
+} IDE_AHCI_RCV_FIS, *PIDE_AHCI_RCV_FIS;
+
#define IsBusMaster(pciData) \
( ((pciData)->Command & (PCI_ENABLE_BUS_MASTER/* | PCI_ENABLE_IO_SPACE*/)) ==
\
@@ -892,7 +909,7 @@
ULONG NumberChannels;
ULONG NumberLuns;
ULONG FirstChannelToCheck;
-#if 1
+#if 0
HW_LU_EXTENSION lun[IDE_MAX_LUN];
HW_CHANNEL chan[AHCI_MAX_PORT/*IDE_MAX_CHAN*/];
#else
@@ -1017,6 +1034,14 @@
OUT PBOOLEAN Again
);
+#define UNIATA_ALLOCATE_NEW_LUNS 0x00
+
+extern BOOLEAN
+UniataAllocateLunExt(
+ PHW_DEVICE_EXTENSION deviceExtension,
+ ULONG NewNumberChannels
+ );
+
extern ULONG DDKAPI
UniataFindBusMasterController(
IN PVOID HwDeviceExtension,
@@ -1159,6 +1184,14 @@
);
extern PDRIVER_OBJECT SavedDriverObject;
+
+extern BOOLEAN
+UniataChipDetectChannels(
+ IN PVOID HwDeviceExtension,
+ IN PPCI_COMMON_CONFIG pciData, // optional
+ IN ULONG DeviceNumber,
+ IN PPORT_CONFIGURATION_INFORMATION ConfigInfo
+ );
extern BOOLEAN
UniataChipDetect(
Modified: trunk/reactos/drivers/storage/ide/uniata/id_ata.cpp
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/id_ata.cpp [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/id_ata.cpp [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -1,6 +1,6 @@
/*++
-Copyright (c) 2002-2007 Alexandr A. Telyatnikov (Alter)
+Copyright (c) 2002-2008 Alexandr A. Telyatnikov (Alter)
Module Name:
id_ata.cpp
@@ -174,7 +174,7 @@
IN ULONG MaxLen
)
{
-#define ITEMS_TO_QUERY 2 // always 1 greater than what is searched
+#define ITEMS_TO_QUERY 2 // always 1 greater than what is searched
NTSTATUS status;
RTL_QUERY_REGISTRY_TABLE parameters[ITEMS_TO_QUERY];
UNICODE_STRING ustr;
@@ -4553,7 +4553,7 @@
}
} else {
- KdPrint2((PRINT_PREFIX
+ KdPrint3((PRINT_PREFIX
"AtapiInterrupt: Int reason %#x, but srb is for a write
%#x.\n",
interruptReason,
srb));
@@ -5039,12 +5039,12 @@
CHECK_INTR_IDLE);
// Sanity check that there is a current request.
- if (srb != NULL) {
+ if(srb != NULL) {
// Set status in SRB.
srb->SrbStatus = (UCHAR)status;
// Check for underflow.
- if (AtaReq->WordsLeft) {
+ if(AtaReq->WordsLeft) {
KdPrint2((PRINT_PREFIX "AtapiInterrupt: Check for underflow,
AtaReq->WordsLeft %x\n", AtaReq->WordsLeft));
// Subtract out residual words and update if filemark hit,
@@ -5424,7 +5424,7 @@
(*max_bcount) = LunExt->IdentifyData.SectorsPerTrack;
} else {
cylinder = (USHORT)(startingSector / tmp);
- drvSelect = (UCHAR)((startingSector % tmp) /
LunExt->IdentifyData.SectorsPerTrack);
+ drvSelect = (UCHAR)((startingSector % tmp) /
LunExt->IdentifyData.SectorsPerTrack);
sectorNumber = (UCHAR)(startingSector % LunExt->IdentifyData.SectorsPerTrack)
+ 1;
(*max_bcount) = LunExt->IdentifyData.SectorsPerTrack - sectorNumber + 1;
KdPrint2((PRINT_PREFIX "UniAtaCalculateLBARegs: C:H:S=%#x:%#x:%#x, max_bc
%#x\n",
@@ -5642,7 +5642,9 @@
(USHORT)(AtaReq->bcount),
// (UCHAR)((wordCount*2 + DEV_BSIZE-1) / DEV_BSIZE),
0, ATA_IMMEDIATE);
- GetStatus(chan, statusByte2);
+ if(statusByte2 != 0xff) {
+ GetStatus(chan, statusByte2);
+ }
if(statusByte2 & IDE_STATUS_ERROR) {
statusByte = AtapiReadPort1(chan, IDX_IO1_i_Error);
KdPrint2((PRINT_PREFIX "IdeReadWrite: status %#x, error %#x\n",
statusByte2, statusByte));
@@ -5660,11 +5662,18 @@
// (UCHAR)((wordCount*2 + DEV_BSIZE-1) / DEV_BSIZE),
0, ATA_WAIT_INTR);
- if (!(statusByte & IDE_STATUS_DRQ)) {
-
- KdPrint2((PRINT_PREFIX
- "IdeReadWrite: DRQ never asserted (%#x)\n",
- statusByte));
+ if (!(statusByte & IDE_STATUS_DRQ) ||
+ statusByte == 0xff) {
+
+ if(statusByte == 0xff) {
+ KdPrint2((PRINT_PREFIX
+ "IdeReadWrite: error sending command (%#x)\n",
+ statusByte));
+ } else {
+ KdPrint2((PRINT_PREFIX
+ "IdeReadWrite: DRQ never asserted (%#x)\n",
+ statusByte));
+ }
AtaReq->WordsLeft = 0;
@@ -5676,7 +5685,7 @@
// Clear current SRB.
UniataRemoveRequest(chan, Srb);
- return SRB_STATUS_TIMEOUT;
+ return (statusByte == 0xff) ? SRB_STATUS_ERROR : SRB_STATUS_TIMEOUT;
}
chan->ExpectingInterrupt = TRUE;
@@ -5756,7 +5765,7 @@
LunExt->IdentifyData.NumberOfCylinders;
}
- KdPrint2((PRINT_PREFIX
+ KdPrint2((PRINT_PREFIX
"IdeVerify: Total sectors %#x\n",
sectors));
@@ -5764,21 +5773,21 @@
MOV_DD_SWP(startingSector, ((PCDB)Srb->Cdb)->CDB10.LBA);
MOV_DW_SWP(sectorCount, ((PCDB)Srb->Cdb)->CDB10.TransferBlocks);
- KdPrint2((PRINT_PREFIX
+ KdPrint2((PRINT_PREFIX
"IdeVerify: Starting sector %#x. Number of blocks %#x\n",
startingSector,
sectorCount));
endSector = startingSector + sectorCount;
- KdPrint2((PRINT_PREFIX
+ KdPrint2((PRINT_PREFIX
"IdeVerify: Ending sector %#x\n",
endSector));
if (endSector > sectors) {
// Too big, round down.
- KdPrint2((PRINT_PREFIX
+ KdPrint2((PRINT_PREFIX
"IdeVerify: Truncating request to %#x blocks\n",
sectors - startingSector - 1));
@@ -6138,19 +6147,19 @@
// Make sure command is to ATAPI device.
flags = deviceExtension->lun[ldev].DeviceFlags;
- if (flags & (DFLAGS_SANYO_ATAPI_CHANGER | DFLAGS_ATAPI_CHANGER)) {
- if ((Srb->Lun) > (deviceExtension->lun[ldev].DiscsPresent - 1)) {
+ if(flags & (DFLAGS_SANYO_ATAPI_CHANGER | DFLAGS_ATAPI_CHANGER)) {
+ if((Srb->Lun) > (deviceExtension->lun[ldev].DiscsPresent - 1)) {
// Indicate no device found at this address.
AtaReq->ReqState = REQ_STATE_TRANSFER_COMPLETE;
return SRB_STATUS_SELECTION_TIMEOUT;
}
- } else if (Srb->Lun > 0) {
+ } else if(Srb->Lun > 0) {
AtaReq->ReqState = REQ_STATE_TRANSFER_COMPLETE;
return SRB_STATUS_SELECTION_TIMEOUT;
}
- if (!(flags & DFLAGS_ATAPI_DEVICE)) {
+ if(!(flags & DFLAGS_ATAPI_DEVICE)) {
AtaReq->ReqState = REQ_STATE_TRANSFER_COMPLETE;
return SRB_STATUS_SELECTION_TIMEOUT;
}
@@ -6162,11 +6171,11 @@
GetStatus(chan, statusByte);
KdPrint3((PRINT_PREFIX "AtapiSendCommand: Entered with status %#x\n",
statusByte));
- if (statusByte == 0xff) {
+ if(statusByte == 0xff) {
KdPrint2((PRINT_PREFIX "AtapiSendCommand: bad status 0xff on
entry\n"));
goto make_reset;
}
- if (statusByte & IDE_STATUS_BUSY) {
+ if(statusByte & IDE_STATUS_BUSY) {
if(statusByte & IDE_STATUS_DSC) {
KdPrint2((PRINT_PREFIX "AtapiSendCommand: DSC on entry (%#x), try
exec\n", statusByte));
} else {
@@ -6176,7 +6185,7 @@
goto make_reset;
}
}
- if (statusByte & IDE_STATUS_ERROR) {
+ if(statusByte & IDE_STATUS_ERROR) {
if (Srb->Cdb[0] != SCSIOP_REQUEST_SENSE) {
KdPrint3((PRINT_PREFIX "AtapiSendCommand: Error on entry: (%#x)\n",
statusByte));
@@ -6189,7 +6198,7 @@
}
// If a tape drive doesn't have DSC set and the last command is restrictive,
don't send
// the next command. See discussion of Restrictive Delayed Process commands in
QIC-157.
- if ((!(statusByte & IDE_STATUS_DSC)) &&
+ if((!(statusByte & IDE_STATUS_DSC)) &&
(flags & (DFLAGS_TAPE_DEVICE | DFLAGS_ATAPI_DEVICE)) &&
chan->RDP) {
AtapiStallExecution(200);
@@ -6198,13 +6207,13 @@
return SRB_STATUS_PENDING;
}
- if (IS_RDP(Srb->Cdb[0])) {
+ if(IS_RDP(Srb->Cdb[0])) {
chan->RDP = TRUE;
KdPrint2((PRINT_PREFIX "AtapiSendCommand: %#x mapped as DSC
restrictive\n", Srb->Cdb[0]));
} else {
chan->RDP = FALSE;
}
- if (statusByte & IDE_STATUS_DRQ) {
+ if(statusByte & IDE_STATUS_DRQ) {
KdPrint3((PRINT_PREFIX "AtapiSendCommand: Entered with status (%#x).
Attempting to recover.\n",
statusByte));
@@ -6213,7 +6222,7 @@
// in production devices.
for (i = 0; i < 0x10000; i++) {
GetStatus(chan, statusByte);
- if (statusByte & IDE_STATUS_DRQ) {
+ if(statusByte & IDE_STATUS_DRQ) {
AtapiReadPort2(chan, IDX_IO1_i_Data);
} else {
break;
@@ -6259,10 +6268,10 @@
}
}
- if (flags & (DFLAGS_SANYO_ATAPI_CHANGER | DFLAGS_ATAPI_CHANGER)) {
+ if(flags & (DFLAGS_SANYO_ATAPI_CHANGER | DFLAGS_ATAPI_CHANGER)) {
// As the cdrom driver sets the LUN field in the cdb, it must be removed.
Srb->Cdb[1] &= ~0xE0;
- if ((Srb->Cdb[0] == SCSIOP_TEST_UNIT_READY) && (flags &
DFLAGS_SANYO_ATAPI_CHANGER)) {
+ if((Srb->Cdb[0] == SCSIOP_TEST_UNIT_READY) && (flags &
DFLAGS_SANYO_ATAPI_CHANGER)) {
// Torisan changer. TUR's are overloaded to be platter switches.
Srb->Cdb[7] = Srb->Lun;
}
@@ -6487,7 +6496,7 @@
switch (Srb->Cdb[0]) {
case SCSIOP_INQUIRY:
- KdPrint2((PRINT_PREFIX
+ KdPrint2((PRINT_PREFIX
"IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID =
%#x:%#x:%#x\n",
Srb->PathId, Srb->Lun, Srb->TargetId));
// Filter out all TIDs but 0 and 1 since this is an IDE interface
@@ -6576,7 +6585,7 @@
case SCSIOP_MODE_SENSE:
- KdPrint2((PRINT_PREFIX
+ KdPrint2((PRINT_PREFIX
"IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID =
%#x:%#x:%#x\n",
Srb->PathId, Srb->Lun, Srb->TargetId));
// This is used to determine if the media is write-protected.
@@ -7296,7 +7305,7 @@
reject_srb:
//if(!CheckDevice(HwDeviceExtension, lChannel, ldev & 1, FALSE)) {
- KdPrint2((PRINT_PREFIX
+ KdPrint3((PRINT_PREFIX
"AtapiStartIo: SRB rejected\n"));
// Indicate no device found at this address.
KdPrint2((PRINT_PREFIX "SRB_STATUS_SELECTION_TIMEOUT\n"));
@@ -8160,9 +8169,16 @@
{
int i;
UCHAR command;
- UCHAR flags = 0;
-
- for(i=0, command=0; i<256; i++, command++) {
+ UCHAR flags;
+
+ KdPrint2((PRINT_PREFIX "UniataInitAtaCommands:\n"));
+
+ for(i=0; i<256; i++) {
+
+ flags = 0;
+ command = i;
+
+ KdPrint2((PRINT_PREFIX "cmd %2.2x: ", command));
switch(command) {
case IDE_COMMAND_READ_DMA48:
@@ -8183,6 +8199,7 @@
case IDE_COMMAND_WRITE_LOG_DMA48:
case IDE_COMMAND_TRUSTED_RCV_DMA:
case IDE_COMMAND_TRUSTED_SEND_DMA:
+ KdPrint2((PRINT_PREFIX "DMA "));
flags |= ATA_CMD_FLAG_DMA;
}
@@ -8205,6 +8222,7 @@
case IDE_COMMAND_FLUSH_CACHE48:
case IDE_COMMAND_VERIFY48:
+ KdPrint2((PRINT_PREFIX "48 "));
flags |= ATA_CMD_FLAG_48;
/* FALL THROUGH */
@@ -8219,6 +8237,7 @@
case IDE_COMMAND_FLUSH_CACHE:
case IDE_COMMAND_VERIFY:
+ KdPrint2((PRINT_PREFIX "LBA "));
flags |= ATA_CMD_FLAG_LBAIOsupp;
}
@@ -8250,9 +8269,11 @@
case IDE_COMMAND_VERIFY:
command = IDE_COMMAND_VERIFY48; break;
default:
+ KdPrint2((PRINT_PREFIX "!28->48 "));
flags &= ~ATA_CMD_FLAG_48supp;
}
+ KdPrint2((PRINT_PREFIX "\t -> %2.2x (%2.2x)\n", command, flags));
AtaCommands48[i] = command;
AtaCommandFlags[i] = flags;
}
@@ -8593,7 +8614,7 @@
/* KeBugCheckEx(0xc000000e,
i,
- c,
+ c,
newStatus, statusToReturn);*/
// --------------
@@ -8924,7 +8945,7 @@
IN ULONG Default
)
{
-#define ITEMS_TO_QUERY 2 // always 1 greater than what is searched
+#define ITEMS_TO_QUERY 2 // always 1 greater than what is searched
// PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
NTSTATUS status;
@@ -8944,7 +8965,8 @@
// KdPrint(( "AtapiCheckRegValue: RegistryPath %ws\n",
RegistryPath->Buffer));
paramPath.Length = 0;
- paramPath.MaximumLength = RegistryPath->Length +
(wcslen(PathSuffix)+2)*sizeof(WCHAR);
+ paramPath.MaximumLength = RegistryPath->Length +
+ (wcslen(PathSuffix)+2)*sizeof(WCHAR);
paramPath.Buffer = (PWCHAR)ExAllocatePool(NonPagedPool, paramPath.MaximumLength);
if(!paramPath.Buffer) {
KdPrint(("AtapiCheckRegValue: couldn't allocate paramPath\n"));
@@ -9051,7 +9073,7 @@
status = UniataConnectIntr2(HwDeviceExtension);
for (c = 0; c < numberChannels; c++) {
AtapiChipInit(HwDeviceExtension, DEVNUM_NOT_SPECIFIED, c);
- FindDevices(HwDeviceExtension, FALSE, c);
+ FindDevices(HwDeviceExtension, 0, c);
AtapiEnableInterrupts(deviceExtension, c);
AtapiHwInitialize__(deviceExtension, c);
}
Modified: trunk/reactos/drivers/storage/ide/uniata/id_dma.cpp
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/id_dma.cpp [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/id_dma.cpp [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -1,6 +1,6 @@
/*++
-Copyright (c) 2002-2007 Alexander A. Telyatnikov (Alter)
+Copyright (c) 2002-2008 Alexander A. Telyatnikov (Alter)
Module Name:
id_dma.cpp
@@ -31,7 +31,7 @@
Revision History:
This module is a port from FreeBSD 4.3-6.1 ATA driver (ata-dma.c, ata-chipset.c) by
- Søren Schmidt, Copyright (c) 1998-2007
+ Søren Schmidt, Copyright (c) 1998-2008
Changed defaulting-to-generic-PIO/DMA policy
Added PIO settings for VIA
@@ -176,24 +176,30 @@
}
}
#endif //USE_OWN_DMA
-/*
+
if(deviceExtension->HwFlags & UNIATA_AHCI) {
- chan->AHCI_CLP =
MmAllocateContiguousMemory(sizeof(((PATA_REQ)NULL)->dma_tab), ph4gb);
- if(chan->AHCI_CLP) {
- chan->DB_PRD_PhAddr = AtapiVirtToPhysAddr(HwDeviceExtension, NULL,
(PUCHAR)(chan->DB_PRD), &i, &ph_addru);
- if(!chan->DB_PRD_PhAddr || !i || ((LONG)(chan->DB_PRD_PhAddr) == -1))
{
- KdPrint2((PRINT_PREFIX "AtapiDmaAlloc: No DB PRD BASE\n" ));
- chan->DB_PRD = NULL;
- chan->DB_PRD_PhAddr = 0;
+ if(chan->AHCI_CL) {
+ return;
+ }
+ chan->AHCI_CL =
(PIDE_AHCI_CMD_LIST)MmAllocateContiguousMemory(sizeof(IDE_AHCI_CMD_LIST)*ATA_AHCI_MAX_TAGS+sizeof(IDE_AHCI_RCV_FIS),
ph4gb);
+ if(chan->AHCI_CL) {
+ chan->AHCI_CL_PhAddr = AtapiVirtToPhysAddr(HwDeviceExtension, NULL,
(PUCHAR)(chan->AHCI_CL), &i, &ph_addru);
+ if(!chan->AHCI_CL_PhAddr || !i || ((LONG)(chan->AHCI_CL_PhAddr) == -1))
{
+ KdPrint2((PRINT_PREFIX "AtapiDmaAlloc: No AHCI CLP BASE\n" ));
+ chan->AHCI_CL = NULL;
+ chan->AHCI_CL_PhAddr = 0;
return;
}
if(ph_addru) {
- KdPrint2((PRINT_PREFIX "AtapiDmaAlloc: No DB PRD below 4Gb\n"
));
- goto err_1;
- }
- }
- }
-*/
+ KdPrint2((PRINT_PREFIX "AtapiDmaAlloc: No AHCI CLP below 4Gb\n"
));
+ MmFreeContiguousMemory(chan->AHCI_CL);
+ chan->AHCI_CL = NULL;
+ chan->AHCI_CL_PhAddr = 0;
+ return;
+ }
+ }
+ }
+
return;
} // end AtapiDmaAlloc()
@@ -708,7 +714,7 @@
IN ULONG mode
)
{
- KdPrint2((PRINT_PREFIX
+ KdPrint3((PRINT_PREFIX
"AtaSetTransferMode: Set %#x on Device %d/%d\n", mode,
lChannel, DeviceNumber));
LONG statusByte = 0;
CHAR apiomode;
@@ -887,7 +893,7 @@
AtaSetTransferMode(deviceExtension, DeviceNumber, lChannel, LunExt, ModeByte);
return;
}
- if (udmamode > 2 && !LunExt->IdentifyData.HwResCableId) {
+ if(udmamode > 2 && !LunExt->IdentifyData.HwResCableId) {
KdPrint2((PRINT_PREFIX "AtapiDmaInit: DMA limited to UDMA33, non-ATA66
compliant cable\n"));
udmamode = 2;
apiomode = min( apiomode, (CHAR)(LunExt->LimitedTransferMode - ATA_PIO));
@@ -1123,6 +1129,29 @@
}
}
/* Use GENERIC PIO */
+ break;
+ case ATA_MARVELL_ID:
+ /***********/
+ /* Marvell */
+ /***********/
+ for(i=udmamode; i>=0; i--) {
+ if(AtaSetTransferMode(deviceExtension, DeviceNumber, lChannel, LunExt,
ATA_UDMA0 + i)) {
+ return;
+ }
+ }
+ for(i=wdmamode; i>=0; i--) {
+ if(AtaSetTransferMode(deviceExtension, DeviceNumber, lChannel, LunExt,
ATA_WDMA0 + i)) {
+ return;
+ }
+ }
+ /* try generic DMA, use hpt_timing() */
+ if (wdmamode >= 0 && apiomode >= 4) {
+ if(AtaSetTransferMode(deviceExtension, DeviceNumber, lChannel, LunExt,
ATA_DMA)) {
+ return;
+ }
+ }
+ AtaSetTransferMode(deviceExtension, DeviceNumber, lChannel, LunExt, ATA_PIO0 +
apiomode);
+ return;
break;
case ATA_NETCELL_ID:
/***********/
Modified: trunk/reactos/drivers/storage/ide/uniata/id_init.cpp
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/id_init.cpp [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/id_init.cpp [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -1,6 +1,6 @@
/*++
-Copyright (c) 2004-2007 Alexandr A. Telyatnikov (Alter)
+Copyright (c) 2004-2008 Alexandr A. Telyatnikov (Alter)
Module Name:
id_init.cpp
@@ -42,6 +42,102 @@
--*/
#include "stdafx.h"
+
+BOOLEAN
+UniataChipDetectChannels(
+ IN PVOID HwDeviceExtension,
+ IN PPCI_COMMON_CONFIG pciData, // optional
+ IN ULONG DeviceNumber,
+ IN PPORT_CONFIGURATION_INFORMATION ConfigInfo
+ )
+{
+ PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
+ ULONG slotNumber = deviceExtension->slotNumber;
+ ULONG SystemIoBusNumber = deviceExtension->SystemIoBusNumber;
+ ULONG VendorID = deviceExtension->DevID & 0xffff;
+ ULONG DeviceID = (deviceExtension->DevID >> 16) & 0xffff;
+ ULONG RevID = deviceExtension->RevID;
+ ULONG ChipType = deviceExtension->HwFlags & CHIPTYPE_MASK;
+ ULONG ChipFlags= deviceExtension->HwFlags & CHIPFLAG_MASK;
+
+ KdPrint2((PRINT_PREFIX "UniataChipDetectChannels:\n" ));
+ switch(VendorID) {
+ case ATA_ACER_LABS_ID:
+ switch(deviceExtension->DevID) {
+ case 0x528710b9:
+ case 0x528810b9:
+ deviceExtension->NumberChannels = 4;
+ KdPrint2((PRINT_PREFIX "Acer 4 chan\n"));
+ }
+ break;
+ case ATA_PROMISE_ID:
+
+ if(ChipType != PRMIO) {
+ break;
+ }
+ deviceExtension->NumberChannels = 4;
+ KdPrint2((PRINT_PREFIX "Promise 4 chan\n"));
+ break;
+ case ATA_MARVELL_ID:
+ KdPrint2((PRINT_PREFIX "Marvell\n"));
+ switch(deviceExtension->DevID) {
+ case 0x610111ab:
+ /* 88SX6101 only have 1 PATA channel */
+ if(BMList[deviceExtension->DevIndex].channel) {
+ KdPrint2((PRINT_PREFIX "88SX6101 has no 2nd PATA chan\n"));
+ return FALSE;
+ }
+ deviceExtension->NumberChannels = 1;
+ KdPrint2((PRINT_PREFIX "88SX6101 PATA 1 chan\n"));
+ break;
+ }
+ break;
+ case ATA_ATI_ID:
+ KdPrint2((PRINT_PREFIX "ATI\n"));
+ switch(deviceExtension->DevID) {
+ case 0x438c1002:
+ case 0x439c1002:
+ /* IXP600 & IXP700 only have 1 PATA channel */
+ if(BMList[deviceExtension->DevIndex].channel) {
+ KdPrint2((PRINT_PREFIX "New ATI no 2nd PATA chan\n"));
+ return FALSE;
+ }
+ deviceExtension->NumberChannels = 1;
+ KdPrint2((PRINT_PREFIX "New ATI PATA 1 chan\n"));
+ break;
+ }
+ case ATA_SILICON_IMAGE_ID:
+
+ if(ChipFlags & SIIBUG) {
+ }
+ if(ChipType != SIIMIO) {
+ break;
+ }
+ if(!pciData) {
+ break;
+ }
+
+ if(VendorID == ATA_SILICON_IMAGE_ID) {
+ KdPrint2((PRINT_PREFIX "New SII\n"));
+ } else {
+ KdPrint2((PRINT_PREFIX "ATI SATA\n"));
+ }
+ if(deviceExtension->HwFlags & SII4CH) {
+ deviceExtension->NumberChannels = 4;
+ KdPrint2((PRINT_PREFIX "4 chan\n"));
+ }
+ break;
+ case ATA_VIA_ID:
+ if((deviceExtension->DevID == 0x32491106) &&
+
ScsiPortConvertPhysicalAddressToUlong((*ConfigInfo->AccessRanges)[5].RangeStart)) {
+ deviceExtension->NumberChannels = 3;
+ KdPrint2((PRINT_PREFIX "VIA 3 chan\n"));
+ }
+ break;
+ } // end switch(VendorID)
+ return TRUE;
+
+} // end UniataChipDetectChannels()
BOOLEAN
UniataChipDetect(
@@ -81,12 +177,27 @@
*simplexOnly = TRUE;
}
+ // defaults
+ BaseIoAddressBM = pciData->u.type0.BaseAddresses[4] & ~0x07;
+ deviceExtension->MaxTransferMode = BaseIoAddressBM ? ATA_DMA : ATA_PIO4;
+ ConfigInfo->MaximumTransferLength = DEV_BSIZE*256;
+ deviceExtension->MaximumDmaTransferLength = ConfigInfo->MaximumTransferLength;
+
KdPrint2((PRINT_PREFIX "i: %#x\n", i));
if(i != BMLIST_TERMINATOR) {
DevTypeInfo = (PBUSMASTER_CONTROLLER_INFORMATION)&BusMasterAdapters[i];
} else {
+ KdPrint2((PRINT_PREFIX " unknown dev, BM addr %#x",
BaseIoAddressBM));
DevTypeInfo = NULL;
- deviceExtension->MaxTransferMode = deviceExtension->BaseIoAddressBM_0.Addr
? ATA_DMA : ATA_PIO4;
+ KdPrint2((PRINT_PREFIX " MaxTransferMode %#x\n",
deviceExtension->MaxTransferMode));
+
+ if(!UniataChipDetectChannels(HwDeviceExtension, pciData, DeviceNumber,
ConfigInfo)) {
+ return FALSE;
+ }
+ if(!UniataAllocateLunExt(deviceExtension, UNIATA_ALLOCATE_NEW_LUNS)) {
+ return FALSE;
+ }
+
return FALSE;
}
@@ -105,7 +216,7 @@
PCI_DEV_HW_SPEC_BM( 0730, 1039, 0x00, ATA_UDMA5, "SiS 730" , SIS100OLD
),
PCI_DEV_HW_SPEC_BM( 0646, 1039, 0x00, ATA_UDMA6, "SiS 645DX", SIS133NEW
),
-/* PCI_DEV_HW_SPEC_BM( 0645, 1039, 0x00, ATA_UDMA6, "SiS 645" ,
SIS133NEW ),*/
+/* PCI_DEV_HW_SPEC_BM( 0645, 1039, 0x00, ATA_UDMA6, "SiS 645" ,
SIS133NEW ),
/* PCI_DEV_HW_SPEC_BM( 0640, 1039, 0x00, ATA_UDMA4, "SiS 640" ,
SIS_SOUTH ),*/
PCI_DEV_HW_SPEC_BM( 0635, 1039, 0x00, ATA_UDMA5, "SiS 635" , SIS100NEW
),
PCI_DEV_HW_SPEC_BM( 0633, 1039, 0x00, ATA_UDMA5, "SiS 633" , SIS100NEW
),
@@ -144,7 +255,8 @@
PCI_DEV_HW_SPEC_BM( 3147, 1106, 0x00, ATA_UDMA6, "VIA 8233A" , VIA133
| VIAAST ),
PCI_DEV_HW_SPEC_BM( 3177, 1106, 0x00, ATA_UDMA6, "VIA 8235" , VIA133
| VIAAST ),
PCI_DEV_HW_SPEC_BM( 3227, 1106, 0x00, ATA_UDMA6, "VIA 8237" , VIA133
| VIAAST ),
- PCI_DEV_HW_SPEC_BM( 3349, 1106, 0x00, ATA_UDMA6, "VIA 8237" , VIA133
| VIAAST ),
+ PCI_DEV_HW_SPEC_BM( 0591, 1106, 0x00, ATA_UDMA6, "VIA 8237A" , VIA133
| VIAAST ),
+ PCI_DEV_HW_SPEC_BM( 3349, 1106, 0x00, ATA_UDMA6, "VIA 8251" , VIA133
| VIAAST ),
PCI_DEV_HW_SPEC_BM( ffff, ffff, 0xff, BMLIST_TERMINATOR , NULL ,
BMLIST_TERMINATOR )
};
@@ -163,10 +275,13 @@
case ATA_SIS_ID:
KdPrint2((PRINT_PREFIX "ATA_SIS_ID\n"));
DevTypeInfo = (BUSMASTER_CONTROLLER_INFORMATION*)&SiSAdapters[0];
- i = AtapiFindListedDev(DevTypeInfo, -1, HwDeviceExtension, SystemIoBusNumber, -1,
NULL);
+ i = AtapiFindListedDev(DevTypeInfo, -1, HwDeviceExtension, SystemIoBusNumber,
PCISLOTNUM_NOT_SPECIFIED, NULL);
+ if(i != BMLIST_TERMINATOR) {
+ deviceExtension->FullDevName = SiSAdapters[i].FullDevName;
+ }
goto for_ugly_chips;
- case ATA_VIA_ID:
+ case ATA_VIA_ID:
KdPrint2((PRINT_PREFIX "ATA_VIA_ID\n"));
// New chips have own DeviceId
if(deviceExtension->DevID != ATA_VIA82C571)
@@ -175,12 +290,15 @@
// only by SouthBridge DeviceId
DevTypeInfo = (BUSMASTER_CONTROLLER_INFORMATION*)&ViaSouthAdapters[0];
i = AtapiFindListedDev(DevTypeInfo, -1, HwDeviceExtension, SystemIoBusNumber,
slotNumber, NULL);
- if(i != 0xFFFFFFFF) {
+ if(i != BMLIST_TERMINATOR) {
KdPrint2((PRINT_PREFIX "VIASOUTH\n"));
deviceExtension->HwFlags |= VIASOUTH;
}
DevTypeInfo = (BUSMASTER_CONTROLLER_INFORMATION*)&ViaAdapters[0];
i = AtapiFindListedDev(DevTypeInfo, -1, HwDeviceExtension, SystemIoBusNumber,
slotNumber, NULL);
+ if(i != BMLIST_TERMINATOR) {
+ deviceExtension->FullDevName = SiSAdapters[i].FullDevName;
+ }
goto for_ugly_chips;
default:
@@ -211,13 +329,13 @@
deviceExtension->MaxTransferMode = ATA_UDMA2;
break;
- case 0x06401095: /* CMD 640 known bad, no DMA */
+ case 0x06401039: /* CMD 640 known bad, no DMA */
case 0x06011039:
*simplexOnly = TRUE;
/* FALLTHROUGH */
- case 0x10001042: /* RZ 100? known bad, no DMA */
+ case 0x10001042: /* RZ 100x known bad, no DMA */
case 0x10011042:
if(deviceExtension->BaseIoAddressBM_0)
@@ -276,20 +394,22 @@
if(deviceExtension->MaxTransferMode >= ATA_SA150) {
deviceExtension->HwFlags |= UNIATA_SATA;
}
-
+/*
ConfigInfo->MaximumTransferLength = DEV_BSIZE*256;
deviceExtension->MaximumDmaTransferLength = ConfigInfo->MaximumTransferLength;
-
+*/
ChipType = deviceExtension->HwFlags & CHIPTYPE_MASK;
ChipFlags = deviceExtension->HwFlags & CHIPFLAG_MASK;
+ if(!UniataChipDetectChannels(HwDeviceExtension, pciData, DeviceNumber, ConfigInfo))
{
+ return FALSE;
+ }
+ if(!UniataAllocateLunExt(deviceExtension, UNIATA_ALLOCATE_NEW_LUNS)) {
+ return FALSE;
+ }
+
switch(VendorID) {
case ATA_ACER_LABS_ID:
- switch(deviceExtension->DevID) {
- case 0x528710b9:
- case 0x528810b9:
- deviceExtension->NumberChannels = 4;
- }
if(ChipFlags & UNIATA_SATA) {
deviceExtension->AltRegMap = TRUE; // inform generic resource allocator
BaseIoAddress1 = AtapiGetIoRange(HwDeviceExtension, ConfigInfo, pciData,
SystemIoBusNumber,
@@ -299,6 +419,7 @@
BaseIoAddressBM = AtapiGetIoRange(HwDeviceExtension, ConfigInfo, pciData,
SystemIoBusNumber,
4, 0,
deviceExtension->NumberChannels*sizeof(IDE_BUSMASTER_REGISTERS));
for(c=0; c<deviceExtension->NumberChannels; c++) {
+ ULONG unit01 = (c & 1);
ULONG unit10 = (c & 2);
chan = &deviceExtension->chan[c];
@@ -353,7 +474,6 @@
if(ChipType != PRMIO) {
break;
}
- deviceExtension->NumberChannels = 4;
if(!pciData) {
break;
}
@@ -424,9 +544,6 @@
}
deviceExtension->BaseIoAddressSATA_0.Addr = BaseMemAddress;
deviceExtension->BaseIoAddressSATA_0.MemIo = MemIo;
- if(deviceExtension->HwFlags & SII4CH) {
- deviceExtension->NumberChannels = 4;
- }
for(c=0; c<deviceExtension->NumberChannels; c++) {
ULONG unit01 = (c & 1);
@@ -512,9 +629,9 @@
chan->RegTranslation[IDX_BM_PRD_Table].MemIo = MemIo;
chan->RegTranslation[IDX_SATA_SStatus].Addr = BaseMemAddress + offs
+ 0x40;
- chan->RegTranslation[IDX_SATA_SStatus].MemIo = MemIo;
+ chan->RegTranslation[IDX_SATA_SStatus].MemIo = MemIo;
chan->RegTranslation[IDX_SATA_SError].Addr = BaseMemAddress + offs
+ 0x44;
- chan->RegTranslation[IDX_SATA_SError].MemIo = MemIo;
+ chan->RegTranslation[IDX_SATA_SError].MemIo = MemIo;
chan->RegTranslation[IDX_SATA_SControl].Addr = BaseMemAddress + offs
+ 0x48;
chan->RegTranslation[IDX_SATA_SControl].MemIo = MemIo;
@@ -555,14 +672,14 @@
if(tmp32 == ATA_SIS5513 ||
tmp32 == ATA_SIS5517) {
i =
AtapiFindListedDev((BUSMASTER_CONTROLLER_INFORMATION*)&SiSSouthAdapters[0],
- -1, HwDeviceExtension, SystemIoBusNumber, -1, NULL);
+ -1, HwDeviceExtension, SystemIoBusNumber, PCISLOTNUM_NOT_SPECIFIED,
NULL);
if(i != BMLIST_TERMINATOR) {
deviceExtension->HwFlags = (deviceExtension->HwFlags &
~CHIPTYPE_MASK) | SIS133OLD;
//deviceExtension->MaxTransferMode = ATA_UDMA6;
deviceExtension->MaxTransferMode =
SiSSouthAdapters[i].MaxTransferMode;
if(SiSSouthAdapters[i].RaidFlags & UNIATA_SATA) {
deviceExtension->HwFlags |= UNIATA_SATA;
- if(SiSSouthAdapters[i].nDeviceId == 0x01182) {
+ if(SiSSouthAdapters[i].nDeviceId == 0x1182) {
SIS_182 = TRUE;
}
}
@@ -617,16 +734,20 @@
if(ChipFlags & UNIATA_SATA) {
ULONG IoSize = 0;
+ ULONG BaseMemAddress = 0;
switch(DeviceID) {
- case 3149: // VIA 6420
+ case 0x3149: // VIA 6420
+ KdPrint2((PRINT_PREFIX "VIA 6420\n"));
IoSize = 0x80;
break;
- case 3249: // VIA 6421
+ case 0x3249: // VIA 6421
+ KdPrint2((PRINT_PREFIX "VIA 6421\n"));
IoSize = 0x40;
break;
}
if(IoSize) {
+ KdPrint2((PRINT_PREFIX "IoSize %x\n", IoSize));
/*deviceExtension->*/BaseMemAddress =
AtapiGetIoRange(HwDeviceExtension, ConfigInfo, pciData, SystemIoBusNumber,
5, 0, IoSize *
deviceExtension->NumberChannels);
if((*ConfigInfo->AccessRanges)[5].RangeInMemory) {
@@ -663,14 +784,18 @@
for (i=0; i<=IDX_BM_IO_SZ; i++) {
chan->RegTranslation[IDX_BM_IO+i].Addr =
BaseIoAddressBM_0 + sizeof(IDE_BUSMASTER_REGISTERS)*c + i;
}
- chan->RegTranslation[IDX_SATA_SStatus].Addr =
BaseMemAddress + (c * IoSize);
- chan->RegTranslation[IDX_SATA_SStatus].MemIo = MemIo;
- chan->RegTranslation[IDX_SATA_SError].Addr =
BaseMemAddress + 4 + (c * IoSize);
- chan->RegTranslation[IDX_SATA_SError].MemIo = MemIo;
- chan->RegTranslation[IDX_SATA_SControl].Addr =
BaseMemAddress + 8 + (c * IoSize);
- chan->RegTranslation[IDX_SATA_SControl].MemIo = MemIo;
-
- chan->ChannelCtrlFlags |= CTRFLAGS_NO_SLAVE;
+ if(c < 2) {
+ // Do not setup SATA registers for PATA part
+ chan->RegTranslation[IDX_SATA_SStatus].Addr =
BaseMemAddress + (c * IoSize);
+ chan->RegTranslation[IDX_SATA_SStatus].MemIo =
MemIo;
+ chan->RegTranslation[IDX_SATA_SError].Addr =
BaseMemAddress + 4 + (c * IoSize);
+ chan->RegTranslation[IDX_SATA_SError].MemIo =
MemIo;
+ chan->RegTranslation[IDX_SATA_SControl].Addr =
BaseMemAddress + 8 + (c * IoSize);
+ chan->RegTranslation[IDX_SATA_SControl].MemIo =
MemIo;
+
+ chan->ChannelCtrlFlags |= CTRFLAGS_NO_SLAVE;
+ }
+
}
}
}
@@ -862,6 +987,7 @@
IN ULONG slotNumber
)
{
+ PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
PCI_COMMON_CONFIG pciData;
ULONG funcNumber;
ULONG busDataRead;
@@ -913,6 +1039,7 @@
IN ULONG c
)
{
+ PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
PCI_COMMON_CONFIG pciData;
ULONG funcNumber;
ULONG busDataRead;
@@ -1024,7 +1151,7 @@
res = FALSE;
for (j=0; j>=2; i -= 8) {
i = (3-(channel*2+j))*8;
- if (((reg50 >> (i & 16)) & 8) &&
+ if (((reg50 >> (i & 0x10)) & 8) &&
((reg50 >> i) & 0x20) &&
(((reg50 >> i) & 7) < a)) {
@@ -1034,6 +1161,35 @@
return res;
} // end via_cable80()
+
+BOOLEAN
+generic_cable80(
+ IN PHW_DEVICE_EXTENSION deviceExtension,
+ IN ULONG channel, // physical channel number (0-1)
+ IN ULONG pci_reg,
+ IN ULONG bit_offs
+ )
+{
+ PVOID HwDeviceExtension = (PVOID)deviceExtension;
+ ULONG slotNumber = deviceExtension->slotNumber;
+ ULONG SystemIoBusNumber = deviceExtension->SystemIoBusNumber;
+
+ ULONG ChipType = deviceExtension->HwFlags & CHIPTYPE_MASK;
+ PHW_CHANNEL chan;
+ ULONG c; // logical channel (for Compatible Mode controllers)
+ UCHAR tmp8;
+
+ c = channel - deviceExtension->Channel; // logical channel (for Compatible Mode
controllers)
+ chan = &deviceExtension->chan[c];
+
+ GetPciConfig1(pci_reg, tmp8);
+ if(!(tmp8 & (1 << (channel << bit_offs)))) {
+ chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2);
+ return FALSE;
+ }
+
+ return TRUE;
+} // end generic_cable80()
VOID
UniAtaReadLunConfig(
@@ -1065,11 +1221,21 @@
tmp32 = AtapiRegCheckDevValue(deviceExtension, channel, ldev,
L"PreferedTransferMode", 0xffffffff);
LunExt->opt_PreferedTransferMode = tmp32;
+ tmp32 = AtapiRegCheckDevValue(deviceExtension, channel, ldev, L"ReadOnly",
0);
+ if(tmp32 <= 2) {
+ LunExt->opt_ReadOnly = (UCHAR)tmp32;
+ }
+
tmp32 = AtapiRegCheckDevValue(deviceExtension, channel, ldev, L"GeomType",
0xffffffff);
if(tmp32 > 2) {
tmp32 = 0xffffffff;
}
LunExt->opt_GeomType = tmp32;
+
+ tmp32 = AtapiRegCheckDevValue(deviceExtension, channel, ldev, L"Hidden",
0);
+ if(tmp32) {
+ LunExt->DeviceFlags |= DFLAGS_HIDDEN;
+ }
return;
} // end UniAtaReadLunConfig()
@@ -1108,6 +1274,7 @@
}
if(c == CHAN_NOT_SPECIFIED) {
+ KdPrint2((PRINT_PREFIX "MaxTransferMode (base): %#x\n",
deviceExtension->MaxTransferMode));
for(c=0; c<deviceExtension->NumberChannels; c++) {
chan = &deviceExtension->chan[c];
chan->MaxTransferMode = deviceExtension->MaxTransferMode;
@@ -1176,12 +1343,18 @@
USHORT tmp16;
ULONG tmp32;
ULONG c; // logical channel (for Compatible Mode controllers)
+ BOOLEAN CheckCable = FALSE;
//ULONG BaseIoAddress;
- if(channel != CHAN_NOT_SPECIFIED) {
+ switch(channel) {
+ case CHAN_NOT_SPECIFIED_CHECK_CABLE:
+ CheckCable = TRUE;
+ /* FALLTHROUGH */
+ case CHAN_NOT_SPECIFIED:
+ c = CHAN_NOT_SPECIFIED;
+ break;
+ default:
c = channel - deviceExtension->Channel; // logical channel (for Compatible
Mode controllers)
- } else {
- c = CHAN_NOT_SPECIFIED;
}
KdPrint2((PRINT_PREFIX "AtapiChipInit: dev %#x, ph chan %d\n",
DeviceNumber, channel ));
@@ -1223,15 +1396,15 @@
/* enable ATAPI UDMA mode */
ChangePciConfig1(0x53, (a | 0x01));
+
+ } else {
+ // check 80-pin cable
+ generic_cable80(deviceExtension, channel, 0x4a, 0);
}
} else {
if(c == CHAN_NOT_SPECIFIED) {
/* deactivate the ATAPI FIFO and enable ATAPI UDMA */
ChangePciConfig1(0x53, (a | 0x03));
- // ATAPI DMA R/O
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- deviceExtension->chan[c].ChannelCtrlFlags |= CTRFLAGS_DMA_RO;
- }
} else {
// ATAPI DMA R/O
deviceExtension->chan[c].ChannelCtrlFlags |= CTRFLAGS_DMA_RO;
@@ -1250,21 +1423,11 @@
if(deviceExtension->MaxTransferMode < ATA_UDMA2)
break;
// check 80-pin cable
- if(ChipFlags & AMDCABLE) {
+ if(!(ChipFlags & UNIATA_NO80CHK)) {
if(c == CHAN_NOT_SPECIFIED) {
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- GetPciConfig1(0x42, tmp8);
- if(!(tmp8 & (1 << channel))) {
- chan->MaxTransferMode =
min(deviceExtension->MaxTransferMode, ATA_UDMA2);
- }
- }
+ // do nothing
} else {
- chan = &deviceExtension->chan[c];
- GetPciConfig1(0x42, tmp8);
- if(!(tmp8 & (1 << channel))) {
- chan->MaxTransferMode = min(deviceExtension->MaxTransferMode,
ATA_UDMA2);
- }
+ generic_cable80(deviceExtension, channel, 0x42, 0);
}
}
break;
@@ -1289,13 +1452,6 @@
}
}
- // check 80-pin cable
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- if(!hpt_cable80(deviceExtension, channel)) {
- chan->MaxTransferMode = min(deviceExtension->MaxTransferMode,
ATA_UDMA2);
- }
- }
} else {
// check 80-pin cable
chan = &deviceExtension->chan[c];
@@ -1337,14 +1493,9 @@
}
if(deviceExtension->MaxTransferMode < ATA_UDMA2)
break;
+ // check 80-pin cable
if(c == CHAN_NOT_SPECIFIED) {
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- GetPciConfig2(0x54, reg54);
- if( ((reg54 >> (channel*2)) & 30) != 30) {
- chan->MaxTransferMode = min(deviceExtension->MaxTransferMode,
ATA_UDMA2);
- }
- }
+ // do nothing
} else {
chan = &deviceExtension->chan[c];
GetPciConfig2(0x54, reg54);
@@ -1366,7 +1517,7 @@
/* enable device and PHY state change interrupts */
AtapiWritePortEx4(NULL,
(ULONG)(&deviceExtension->BaseIoAddressSATA_0),offs+4, 0x000d000d);
/* disable NCQ support */
- AtapiWritePortEx4(NULL,
(ULONG)(&deviceExtension->BaseIoAddressSATA_0),0x0400,
+ AtapiWritePortEx4(NULL,
(ULONG)(&deviceExtension->BaseIoAddressSATA_0),0x0400,
AtapiReadPortEx4(NULL,
(ULONG)(&deviceExtension->BaseIoAddressSATA_0),0x0400) & 0xfffffff9);
} else {
/* clear interrupt status */
@@ -1380,27 +1531,19 @@
//UniataSataPhyEnable(HwDeviceExtension, c);
}
} else {
- UCHAR reg52;
-
- // check 80-pin cable
+ //UCHAR reg52;
+
if(c == CHAN_NOT_SPECIFIED) {
-
/* set prefetch, postwrite */
ChangePciConfig1(0x51, (a & 0x0f));
-
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- GetPciConfig1(0x52, reg52);
- if( !((reg52 >> (channel*2)) & 0x01)) {
- chan->MaxTransferMode =
min(deviceExtension->MaxTransferMode, ATA_UDMA2);
- }
- }
} else {
- chan = &deviceExtension->chan[c];
+ // check 80-pin cable
+ generic_cable80(deviceExtension, channel, 0x52, 1);
+/* chan = &deviceExtension->chan[c];
GetPciConfig1(0x52, reg52);
if( !((reg52 >> (channel*2)) & 0x01)) {
chan->MaxTransferMode = min(deviceExtension->MaxTransferMode,
ATA_UDMA2);
- }
+ }*/
}
}
break; }
@@ -1411,7 +1554,7 @@
/* setup clocks */
if(c == CHAN_NOT_SPECIFIED) {
// ATA_OUTB(ctlr->r_res1, 0x11, ATA_INB(ctlr->r_res1, 0x11) | 0x0a);
- AtapiWritePortEx1(NULL,
(ULONG)(&deviceExtension->BaseIoAddressBM_0),0x11,
+ AtapiWritePortEx1(NULL,
(ULONG)(&deviceExtension->BaseIoAddressBM_0),0x11,
AtapiReadPortEx1(NULL,
(ULONG)(&deviceExtension->BaseIoAddressBM_0),0x11) | 0x0a );
}
/* FALLTHROUGH */
@@ -1419,16 +1562,10 @@
/* enable burst mode */
// ATA_OUTB(ctlr->r_res1, 0x1f, ATA_INB(ctlr->r_res1, 0x1f) | 0x01);
if(c == CHAN_NOT_SPECIFIED) {
- AtapiWritePortEx1(NULL,
(ULONG)(&deviceExtension->BaseIoAddressBM_0),0x1f,
+ AtapiWritePortEx1(NULL,
(ULONG)(&deviceExtension->BaseIoAddressBM_0),0x1f,
AtapiReadPortEx1(NULL,
(ULONG)(&deviceExtension->BaseIoAddressBM_0),0x1f) | 0x01 );
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- GetPciConfig2(0x50, Reg50);
- if(Reg50 & (1 << (channel+10))) {
- chan->MaxTransferMode =
min(deviceExtension->MaxTransferMode, ATA_UDMA2);
- }
- }
} else {
+ // check 80-pin cable
chan = &deviceExtension->chan[c];
GetPciConfig2(0x50, Reg50);
if(Reg50 & (1 << (channel+10))) {
@@ -1438,14 +1575,9 @@
break;
case PRTX:
if(c == CHAN_NOT_SPECIFIED) {
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- AtapiWritePort1(chan, IDX_BM_DeviceSpecific0, 0x0b);
- if(AtapiReadPort1(chan, IDX_BM_DeviceSpecific1) & 0x04) {
- chan->MaxTransferMode =
min(deviceExtension->MaxTransferMode, ATA_UDMA2);
- }
- }
+ // do nothing
} else {
+ // check 80-pin cable
chan = &deviceExtension->chan[c];
AtapiWritePort1(chan, IDX_BM_DeviceSpecific0, 0x0b);
if(AtapiReadPort1(chan, IDX_BM_DeviceSpecific1) & 0x04) {
@@ -1458,21 +1590,12 @@
if(ChipFlags & PRSATA) {
AtapiWritePortEx4(NULL,
(ULONG)(&deviceExtension->BaseIoAddressBM_0),0x6c, 0x000000ff);
}
- for(c=0; c<4; c++) {
- chan = &deviceExtension->chan[c];
- AtapiWritePort4(chan, IDX_BM_Command,
- (AtapiReadPort4(chan, IDX_BM_Command) & ~0x00000f8f) |
channel );
- AtapiWritePort4(chan, IDX_BM_DeviceSpecific0, 0x00000001);
- if(chan->MaxTransferMode < ATA_SA150 &&
- (AtapiReadPort4(chan, IDX_BM_Command) & 0x01000000)) {
- chan->MaxTransferMode =
min(deviceExtension->MaxTransferMode, ATA_UDMA2);
- }
- }
} else {
chan = &deviceExtension->chan[c];
- AtapiWritePort4(chan, IDX_BM_Command,
+ AtapiWritePort4(chan, IDX_BM_Command,
(AtapiReadPort4(chan, IDX_BM_Command) & ~0x00000f8f) | channel
);
AtapiWritePort4(chan, IDX_BM_DeviceSpecific0, 0x00000001);
+ // check 80-pin cable
if(chan->MaxTransferMode < ATA_SA150 &&
(AtapiReadPort4(chan, IDX_BM_Command) & 0x01000000)) {
chan->MaxTransferMode = min(deviceExtension->MaxTransferMode,
ATA_UDMA2);
@@ -1507,7 +1630,7 @@
case SIIMIO: {
KdPrint2((PRINT_PREFIX "SII\n"));
- UCHAR Reg79;
+ USHORT Reg79;
if(c == CHAN_NOT_SPECIFIED) {
if(ChipFlags & SIISETCLK) {
@@ -1523,16 +1646,11 @@
}
}
if(deviceExtension->MaxTransferMode < ATA_SA150) {
- KdPrint2((PRINT_PREFIX "Check UDMA66 cable\n"));
+ // check 80-pin cable
if(c == CHAN_NOT_SPECIFIED) {
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- GetPciConfig2(0x79, Reg79);
- if(Reg79 & (channel ? 0x02 : 0x01)) {
- chan->MaxTransferMode =
min(deviceExtension->MaxTransferMode, ATA_UDMA2);
- }
- }
+ // do nothing
} else {
+ KdPrint2((PRINT_PREFIX "Check UDMA66 cable\n"));
chan = &deviceExtension->chan[c];
GetPciConfig2(0x79, Reg79);
if(Reg79 & (channel ? 0x02 : 0x01)) {
@@ -1647,14 +1765,9 @@
}
if(ChipType == SIS133NEW) {
USHORT tmp16;
+ // check 80-pin cable
if(c == CHAN_NOT_SPECIFIED) {
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- GetPciConfig2(channel ? 0x52 : 0x50, tmp16);
- if(tmp16 & 0x8000) {
- chan->MaxTransferMode =
min(deviceExtension->MaxTransferMode, ATA_UDMA2);
- }
- }
+ // do nothing
} else {
chan = &deviceExtension->chan[c];
GetPciConfig2(channel ? 0x52 : 0x50, tmp16);
@@ -1663,14 +1776,9 @@
}
}
} else {
+ // check 80-pin cable
if(c == CHAN_NOT_SPECIFIED) {
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- GetPciConfig1(48, tmp8);
- if(tmp8 & (0x10 << channel)) {
- chan->MaxTransferMode =
min(deviceExtension->MaxTransferMode, ATA_UDMA2);
- }
- }
+ // do nothing
} else {
chan = &deviceExtension->chan[c];
GetPciConfig1(48, tmp8);
@@ -1693,23 +1801,7 @@
ChangePciConfig2(/*PCIR_COMMAND*/0x04, (a & ~0x0400));
break;
}
- }
- // check 80-pin cable
- if(c == CHAN_NOT_SPECIFIED) {
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- if(!via_cable80(deviceExtension, channel)) {
- chan->MaxTransferMode = min(deviceExtension->MaxTransferMode,
ATA_UDMA2);
- }
- }
- } else {
- chan = &deviceExtension->chan[c];
- if(!via_cable80(deviceExtension, channel)) {
- chan->MaxTransferMode = min(deviceExtension->MaxTransferMode,
ATA_UDMA2);
- }
- }
-
- if(c == CHAN_NOT_SPECIFIED) {
+
/* the southbridge might need the data corruption fix */
if(ChipFlags & VIABUG) {
AtapiViaSouthBridgeFixup(HwDeviceExtension, PCIConfiguration,
@@ -1732,6 +1824,12 @@
/* set sector size */
SetPciConfig2(0x60, DEV_BSIZE);
SetPciConfig2(0x68, DEV_BSIZE);
+ } else {
+ // check 80-pin cable
+ chan = &deviceExtension->chan[c];
+ if(!via_cable80(deviceExtension, channel)) {
+ chan->MaxTransferMode = min(deviceExtension->MaxTransferMode,
ATA_UDMA2);
+ }
}
break;
@@ -1747,18 +1845,9 @@
/* set default active & recover timings */
SetPciConfig1(0x54, 0x31);
SetPciConfig1(0x56, 0x31);
- }
-
- GetPciConfig2(0x40, tmp16);
- // check 80-pin cable
- if(c == CHAN_NOT_SPECIFIED) {
- for(c=0; c<deviceExtension->NumberChannels; c++) {
- chan = &deviceExtension->chan[c];
- if(!(tmp16 & (channel ? 0x08 : 0x04))) {
- chan->MaxTransferMode = min(deviceExtension->MaxTransferMode,
ATA_UDMA2);
- }
- }
} else {
+ // check 80-pin cable
+ GetPciConfig2(0x40, tmp16);
chan = &deviceExtension->chan[c];
if(!(tmp16 & (channel ? 0x08 : 0x04))) {
chan->MaxTransferMode = min(deviceExtension->MaxTransferMode,
ATA_UDMA2);
@@ -1766,6 +1855,23 @@
}
break;
+ default:
+ if(c != CHAN_NOT_SPECIFIED) {
+ // We don't know how to check for 80-pin cable on unknown controllers.
+ // Later we shall check bit in IDENTIFY structure, but it is not reliable
way.
+ // So, leave this flag to use as hint in error recovery procedures
+ KdPrint2((PRINT_PREFIX "UNIATA_NO80CHK\n"));
+ deviceExtension->HwFlags |= UNIATA_NO80CHK;
+ }
+ break;
+ }
+
+ // In all places separate channels are inited after common controller init
+ // The only exception is probe. But there we may need info about 40/80 pin and
MaxTransferRate
+ if(CheckCable && !(ChipFlags & (UNIATA_NO80CHK | UNIATA_SATA))) {
+ for(c=0; c<deviceExtension->NumberChannels; c++) {
+ AtapiChipInit(HwDeviceExtension, DeviceNumber, c);
+ }
}
return TRUE;
Modified: trunk/reactos/drivers/storage/ide/uniata/id_probe.cpp
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/id_probe.cpp [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/id_probe.cpp [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -1,6 +1,6 @@
/*++
-Copyright (c) 2002-2007 Alexandr A. Telyatnikov (Alter)
+Copyright (c) 2002-2008 Alexandr A. Telyatnikov (Alter)
Module Name:
id_probe.cpp
@@ -76,7 +76,7 @@
VOID
AtapiDoNothing(VOID)
{
- //ULONG i = 0;
+ ULONG i = 0;
return;
} // end AtapiDoNothing()
@@ -504,8 +504,8 @@
/* if(known) {
RtlCopyMemory(newBMListPtr,
(PVOID)&(BusMasterAdapters[i]), sizeof(BUSMASTER_CONTROLLER_INFORMATION));
} else {*/
- sprintf((PCHAR)vendorStrPtr, "%4.4x",
(UINT32)VendorID);
- sprintf((PCHAR)deviceStrPtr, "%4.4x",
(UINT32)DeviceID);
+ sprintf((PCHAR)vendorStrPtr, "%4.4x", VendorID);
+ sprintf((PCHAR)deviceStrPtr, "%4.4x", DeviceID);
RtlCopyMemory(&(newBMListPtr->VendorIdStr),
(PCHAR)vendorStrPtr, 4);
RtlCopyMemory(&(newBMListPtr->DeviceIdStr),
(PCHAR)deviceStrPtr, 4);
@@ -767,6 +767,44 @@
Again
);
} // end UniataFindCompatBusMasterController2()
+
+BOOLEAN
+UniataAllocateLunExt(
+ PHW_DEVICE_EXTENSION deviceExtension,
+ ULONG NewNumberChannels
+ )
+{
+ PHW_LU_EXTENSION old_luns = NULL;
+ PHW_CHANNEL old_chans = NULL;
+
+ KdPrint2((PRINT_PREFIX "allocate Luns for %d channels\n",
deviceExtension->NumberChannels));
+
+ old_luns = deviceExtension->lun;
+ old_chans = deviceExtension->chan;
+
+ if(old_luns || old_chans) {
+ if(NewNumberChannels == UNIATA_ALLOCATE_NEW_LUNS) {
+ KdPrint2((PRINT_PREFIX "already allocated!\n"));
+ return FALSE;
+ }
+ }
+
+ deviceExtension->lun = (PHW_LU_EXTENSION)ExAllocatePool(NonPagedPool,
sizeof(HW_LU_EXTENSION) * (deviceExtension->NumberChannels+1) * IDE_MAX_LUN_PER_CHAN);
+ if (!deviceExtension->lun) {
+ KdPrint2((PRINT_PREFIX "!deviceExtension->lun =>
SP_RETURN_ERROR\n"));
+ return FALSE;
+ }
+ RtlZeroMemory(deviceExtension->lun, sizeof(HW_LU_EXTENSION) *
(deviceExtension->NumberChannels+1) * IDE_MAX_LUN_PER_CHAN);
+
+ deviceExtension->chan = (PHW_CHANNEL)ExAllocatePool(NonPagedPool,
sizeof(HW_CHANNEL) * (deviceExtension->NumberChannels+1));
+ if (!deviceExtension->chan) {
+ KdPrint2((PRINT_PREFIX "!deviceExtension->chan =>
SP_RETURN_ERROR\n"));
+ return FALSE;
+ }
+ RtlZeroMemory(deviceExtension->chan, sizeof(HW_CHANNEL) *
(deviceExtension->NumberChannels+1));
+ return TRUE;
+} // end UniataAllocateLunExt()
+
/*++
@@ -861,6 +899,8 @@
KdPrint2((PRINT_PREFIX "UniataFindBusMasterController: Context=%x,
BMListLen=%d\n", Context, BMListLen));
+ KdPrint2((PRINT_PREFIX "ConfigInfo->Length %x\n",
ConfigInfo->Length));
+
if(ForceSimplex) {
KdPrint2((PRINT_PREFIX "ForceSimplex (1)\n"));
simplexOnly = TRUE;
@@ -893,7 +933,7 @@
i &= ~0x80000000;
if(i >= BMListLen) {
KdPrint2((PRINT_PREFIX " => SP_RETURN_NOT_FOUND\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
}
BMList[i].channel = (UCHAR)channel;
@@ -933,13 +973,13 @@
#ifndef UNIATA_CORE
if (busDataRead < (ULONG)PCI_COMMON_HDR_LENGTH) {
KdPrint2((PRINT_PREFIX "busDataRead < PCI_COMMON_HDR_LENGTH =>
SP_RETURN_ERROR\n"));
- return SP_RETURN_ERROR;
+ goto exit_error;
}
KdPrint2((PRINT_PREFIX "busDataRead\n"));
if (pciData.VendorID == PCI_INVALID_VENDORID) {
KdPrint2((PRINT_PREFIX "PCI_INVALID_VENDORID\n"));
- return SP_RETURN_ERROR;
+ goto exit_error;
}
#endif //UNIATA_CORE
@@ -964,7 +1004,7 @@
if(BaseClass != PCI_DEV_CLASS_STORAGE) {
KdPrint2((PRINT_PREFIX "BaseClass != PCI_DEV_CLASS_STORAGE =>
SP_RETURN_NOT_FOUND\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
KdPrint2((PRINT_PREFIX "Storage Class\n"));
@@ -973,13 +1013,13 @@
if(VendorID != BMList[i].nVendorId ||
DeviceID != BMList[i].nDeviceId) {
KdPrint2((PRINT_PREFIX "device not suitable\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
found = UniataCheckPCISubclass(BMList[i].Known, BMList[i].RaidFlags, SubClass);
if(!found) {
KdPrint2((PRINT_PREFIX "Subclass not supported\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
ConfigInfo->AlignmentMask = 0x00000003;
@@ -1017,7 +1057,7 @@
KdPrint2((PRINT_PREFIX "HwFlags = %x\n (1)",
deviceExtension->HwFlags));
if(!found) {
KdPrint2((PRINT_PREFIX "!found => SP_RETURN_NOT_FOUND\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
KdPrint2((PRINT_PREFIX "HwFlags = %x\n (2)",
deviceExtension->HwFlags));
@@ -1050,11 +1090,11 @@
} else {
if((channel==0) && ConfigInfo->AtdiskPrimaryClaimed) {
KdPrint2((PRINT_PREFIX "Error: Primary channel already claimed by
another driver\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
if((channel==1) && ConfigInfo->AtdiskSecondaryClaimed) {
KdPrint2((PRINT_PREFIX "Error: Secondary channel already claimed by
another driver\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
}
}
@@ -1274,12 +1314,14 @@
if((WinVer_Id() >= WinVer_NT) ||
(ConfigInfo->Length >= sizeof(_ConfigInfo->comm) +
sizeof(_ConfigInfo->nt4))) {
+ KdPrint2((PRINT_PREFIX "update ConfigInfo->nt4\n"));
_ConfigInfo->nt4.DeviceExtensionSize = sizeof(HW_DEVICE_EXTENSION);
_ConfigInfo->nt4.SpecificLuExtensionSize = sizeof(HW_LU_EXTENSION);
_ConfigInfo->nt4.SrbExtensionSize = sizeof(ATA_REQ);
}
if((WinVer_Id() > WinVer_2k) ||
(ConfigInfo->Length >= sizeof(_ConfigInfo->comm) +
sizeof(_ConfigInfo->nt4) + sizeof(_ConfigInfo->w2k))) {
+ KdPrint2((PRINT_PREFIX "update ConfigInfo->w2k\n"));
_ConfigInfo->w2k.Dma64BitAddresses = 0;
_ConfigInfo->w2k.ResetTargetSupported = TRUE;
_ConfigInfo->w2k.MaximumNumberOfLogicalUnits = 2;
@@ -1317,7 +1359,7 @@
if(AltInit) {
// I'm sorry, I have to do this
- // when Win doesn't
+ // when Win doesn't
if(ConfigInfo->AdapterInterfaceType == Isa /*&&
// InDriverEntry*/) {
@@ -1526,7 +1568,7 @@
// Search for devices on this controller.
if (!skip_find_dev &&
FindDevices(HwDeviceExtension,
- FALSE,
+ 0,
c)) {
KdPrint2((PRINT_PREFIX "Found some devices\n"));
found = TRUE;
@@ -1592,7 +1634,7 @@
BaseIoAddressBM_0);
KdPrint2((PRINT_PREFIX "return SP_RETURN_NOT_FOUND\n"));
- return SP_RETURN_NOT_FOUND;
+ goto exit_notfound;
} else {
KdPrint2((PRINT_PREFIX "exit: init spinlock\n"));
@@ -1641,6 +1683,16 @@
ConfigInfo->NumberOfBuses++; // add virtual channel for communication port
return SP_RETURN_FOUND;
+
+exit_error:
+ if (deviceExtension->lun) ExFreePool(deviceExtension->lun);
+ if (deviceExtension->chan) ExFreePool(deviceExtension->chan);
+ return SP_RETURN_ERROR;
+
+exit_notfound:
+ ExFreePool(deviceExtension->lun);
+ ExFreePool(deviceExtension->chan);
+ return SP_RETURN_NOT_FOUND;
} // end UniataFindBusMasterController()
@@ -1713,7 +1765,7 @@
}
if(i >= BMListLen) {
KdPrint2((PRINT_PREFIX "unexpected device arrival =>
SP_RETURN_NOT_FOUND\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
}
@@ -1747,13 +1799,13 @@
if (busDataRead < PCI_COMMON_HDR_LENGTH) {
KdPrint2((PRINT_PREFIX "busDataRead < PCI_COMMON_HDR_LENGTH =>
SP_RETURN_ERROR\n"));
- return SP_RETURN_ERROR;
+ goto exit_error;
}
KdPrint2((PRINT_PREFIX "busDataRead\n"));
if (pciData.VendorID == PCI_INVALID_VENDORID) {
KdPrint2((PRINT_PREFIX "PCI_INVALID_VENDORID\n"));
- return SP_RETURN_ERROR;
+ goto exit_error;
}
VendorID = pciData.VendorID;
@@ -1777,7 +1829,7 @@
if(BaseClass != PCI_DEV_CLASS_STORAGE) {
KdPrint2((PRINT_PREFIX "BaseClass != PCI_DEV_CLASS_STORAGE =>
SP_RETURN_NOT_FOUND\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
KdPrint2((PRINT_PREFIX "Storage Class\n"));
@@ -1786,13 +1838,13 @@
if(VendorID != BMList[i].nVendorId ||
DeviceID != BMList[i].nDeviceId) {
KdPrint2((PRINT_PREFIX "device not suitable\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
if((BMList[i].RaidFlags & UNIATA_RAID_CONTROLLER) &&
SkipRaids) {
KdPrint2((PRINT_PREFIX "RAID support disabled\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
switch(SubClass) {
@@ -1804,7 +1856,7 @@
break;
default:
KdPrint2((PRINT_PREFIX "Subclass not supported\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
ConfigInfo->AlignmentMask = 0x00000003;
@@ -1842,7 +1894,7 @@
KdPrint2((PRINT_PREFIX "HwFlags = %x\n (1)",
deviceExtension->HwFlags));
if(!found) {
KdPrint2((PRINT_PREFIX "!found => SP_RETURN_NOT_FOUND\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
KdPrint2((PRINT_PREFIX "HwFlags = %x\n (2)",
deviceExtension->HwFlags));
@@ -1868,16 +1920,16 @@
deviceExtension->NumberChannels = 1;
} else {
KdPrint2((PRINT_PREFIX "!MasterDev => SP_RETURN_NOT_FOUND\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
if(deviceExtension->AltRegMap) {
KdPrint2((PRINT_PREFIX " Non-standard registers layout =>
SP_RETURN_NOT_FOUND\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
if(IsBusMaster(&pciData)) {
KdPrint2((PRINT_PREFIX " !BusMaster => SP_RETURN_NOT_FOUND\n"));
- return(SP_RETURN_NOT_FOUND);
+ goto exit_notfound;
}
KdPrint2((PRINT_PREFIX "IsBusMaster == TRUE\n"));
@@ -1959,6 +2011,16 @@
//PrintNtConsole("return SP_RETURN_FOUND, de %#x, c0.lun0 %#x\n",
deviceExtension, deviceExtension->chan[0].lun[0]);
return SP_RETURN_FOUND;
+
+exit_error:
+ if (deviceExtension->lun) ExFreePool(deviceExtension->lun);
+ if (deviceExtension->chan) ExFreePool(deviceExtension->chan);
+ return SP_RETURN_ERROR;
+
+exit_notfound:
+ ExFreePool(deviceExtension->lun);
+ ExFreePool(deviceExtension->chan);
+ return SP_RETURN_NOT_FOUND;
} // end UniataFindFakeBusMasterController()
@@ -2143,7 +2205,7 @@
)
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
- PHW_CHANNEL chan = &(deviceExtension->chan[0]);
+ PHW_CHANNEL chan;
PULONG adapterCount = (PULONG)Context;
PUCHAR ioSpace;
ULONG i;
@@ -2176,6 +2238,12 @@
KdPrint2((PRINT_PREFIX " assume max PIO4\n"));
deviceExtension->MaxTransferMode = ATA_PIO4;
deviceExtension->NumberChannels = 1;
+
+ if(!UniataAllocateLunExt(deviceExtension, UNIATA_ALLOCATE_NEW_LUNS)) {
+ goto exit_error;
+ }
+
+ chan = &(deviceExtension->chan[0]);
deviceExtension->AdapterInterfaceType =
deviceExtension->OrigAdapterInterfaceType
@@ -2531,8 +2599,15 @@
KdPrint2((PRINT_PREFIX
"AtapiFindController: return SP_RETURN_NOT_FOUND\n"));
+ ExFreePool(deviceExtension->lun);
+ ExFreePool(deviceExtension->chan);
return(SP_RETURN_NOT_FOUND);
+exit_error:
+ if (deviceExtension->lun) ExFreePool(deviceExtension->lun);
+ if (deviceExtension->chan) ExFreePool(deviceExtension->chan);
+ return SP_RETURN_ERROR;
+
} // end AtapiFindController()
BOOLEAN
Modified: trunk/reactos/drivers/storage/ide/uniata/id_sata.cpp
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/id_sata.cpp [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/id_sata.cpp [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -7,7 +7,7 @@
)
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
- //ULONG Channel = deviceExtension->Channel + lChannel;
+ ULONG Channel = deviceExtension->Channel + lChannel;
PHW_CHANNEL chan = &deviceExtension->chan[lChannel];
SATA_SSTATUS_REG SStatus;
ULONG i;
@@ -126,7 +126,7 @@
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
PHW_CHANNEL chan = &deviceExtension->chan[lChannel];
- //ULONG ChipFlags = deviceExtension->HwFlags & CHIPFLAG_MASK;
+ ULONG ChipFlags = deviceExtension->HwFlags & CHIPFLAG_MASK;
SATA_SSTATUS_REG SStatus;
SATA_SERROR_REG SError;
@@ -134,7 +134,7 @@
//if(ChipFlags & UNIATA_SATA) {
SStatus.Reg = AtapiReadPort4(chan, IDX_SATA_SStatus);
- SError.Reg = AtapiReadPort4(chan, IDX_SATA_SError);
+ SError.Reg = AtapiReadPort4(chan, IDX_SATA_SError);
if(SStatus.Reg) {
KdPrint2((PRINT_PREFIX " SStatus %x\n", SStatus.Reg));
@@ -203,13 +203,14 @@
{
PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension;
ULONG version;
- ULONG c;
+ ULONG c, i, n;
PHW_CHANNEL chan;
ULONG offs;
ULONG BaseMemAddress;
ULONG PI;
ULONG CAP;
BOOLEAN MemIo;
+ ULONGLONG base;
/* reset AHCI controller */
AtapiWritePortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, IDX_AHCI_GHC,
@@ -225,9 +226,11 @@
AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0,
IDX_AHCI_GHC) | AHCI_GHC_AE);
CAP = AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0,
IDX_AHCI_CAP);
+ PI = AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0,
IDX_AHCI_PI);
/* get the number of HW channels */
+ for(i=PI, n=0; i; n++, i=i>>1);
deviceExtension->NumberChannels =
- (CAP & AHCI_CAP_NOP_MASK)+1;
+ max((CAP & AHCI_CAP_NOP_MASK)+1, n);
if(CAP & AHCI_CAP_S64A) {
KdPrint2((PRINT_PREFIX " AHCI 64bit\n"));
deviceExtension->Host64 = TRUE;
@@ -242,7 +245,6 @@
AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0,
IDX_AHCI_GHC) | AHCI_GHC_IE);
version = AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0,
IDX_AHCI_VS);
- PI = AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0,
IDX_AHCI_PI);
KdPrint2((PRINT_PREFIX " AHCI version %x%x.%x%x controller with %d ports (mask
%x) detected\n",
(version >> 24) & 0xff, (version >> 16) & 0xff,
(version >> 8) & 0xff, version & 0xff,
deviceExtension->NumberChannels, PI));
@@ -281,6 +283,24 @@
chan->RegTranslation[IDX_SATA_SActive].Addr = BaseMemAddress + offs +
FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, SACT);
chan->RegTranslation[IDX_SATA_SActive].MemIo = MemIo;
+ AtapiDmaAlloc(HwDeviceExtension, NULL, c);
+
+ base = chan->AHCI_CL_PhAddr;
+ if(!base) {
+ KdPrint2((PRINT_PREFIX " AHCI buffer allocation failed\n"));
+ return FALSE;
+ }
+ AtapiWritePortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, offs +
IDX_AHCI_P_CLB,
+ (ULONG)(base & 0xffffffff));
+ AtapiWritePortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, offs +
IDX_AHCI_P_CLB + 4,
+ (ULONG)((base >> 32) & 0xffffffff));
+
+ base = chan->AHCI_CL_PhAddr + ATA_AHCI_MAX_TAGS;
+ AtapiWritePortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, offs +
IDX_AHCI_P_FB,
+ (ULONG)(base & 0xffffffff));
+ AtapiWritePortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, offs +
IDX_AHCI_P_FB + 4,
+ (ULONG)((base >> 32) & 0xffffffff));
+
chan->ChannelCtrlFlags |= CTRFLAGS_NO_SLAVE;
}
@@ -367,6 +387,13 @@
i = 0;
plba = (PUCHAR)&lba;
+ if((AtaCommandFlags[command] & ATA_CMD_FLAG_LBAIOsupp) &&
+ CheckIfBadBlock(&(deviceExtension->lun[ldev]), lba, count)) {
+ KdPrint3((PRINT_PREFIX ": artificial bad block, lba %#I64x count
%#x\n", lba, count));
+ return IDE_STATUS_ERROR;
+ //return SRB_STATUS_ERROR;
+ }
+
/* translate command into 48bit version */
if ((lba >= ATA_MAX_LBA28 || count > 256) &&
deviceExtension->lun[ldev].IdentifyData.FeaturesSupport.Address48) {
@@ -378,36 +405,36 @@
}
}
- fis[i++] = 0x27; /* host to device */
- fis[i++] = 0x80; /* command FIS (note PM goes here) */
- fis[i++] = command;
- fis[i++] = (UCHAR)feature;
-
- fis[i++] = plba[0];
- fis[i++] = plba[1];
- fis[i++] = plba[2];
- fis[i] = IDE_USE_LBA | (DeviceNumber ? IDE_DRIVE_2 : IDE_DRIVE_1);
+ fis[0] = 0x27; /* host to device */
+ fis[1] = 0x80; /* command FIS (note PM goes here) */
+ fis[2] = command;
+ fis[3] = (UCHAR)feature;
+
+ fis[4] = plba[0];
+ fis[5] = plba[1];
+ fis[6] = plba[2];
+ fis[7] = IDE_USE_LBA | (DeviceNumber ? IDE_DRIVE_2 : IDE_DRIVE_1);
if ((lba >= ATA_MAX_LBA28 || count > 256) &&
deviceExtension->lun[ldev].IdentifyData.FeaturesSupport.Address48) {
i++;
} else {
- fis[i++] |= (plba[3] >> 24) & 0x0f;
- }
-
- fis[i++] = plba[3];
- fis[i++] = plba[4];
- fis[i++] = plba[5];
- fis[i++] = (UCHAR)(feature>>8) & 0xff;
-
- fis[i++] = (UCHAR)count & 0xff;
- fis[i++] = (UCHAR)(count>>8) & 0xff;
- fis[i++] = 0x00;
- fis[i++] = IDE_DC_A_4BIT;
-
- fis[i++] = 0x00;
- fis[i++] = 0x00;
- fis[i++] = 0x00;
- fis[i++] = 0x00;
- return i;
+ fis[7] |= (plba[3] >> 24) & 0x0f;
+ }
+
+ fis[8] = plba[3];
+ fis[9] = plba[4];
+ fis[10] = plba[5];
+ fis[11] = (UCHAR)(feature>>8) & 0xff;
+
+ fis[12] = (UCHAR)count & 0xff;
+ fis[13] = (UCHAR)(count>>8) & 0xff;
+ fis[14] = 0x00;
+ fis[15] = IDE_DC_A_4BIT;
+
+ fis[16] = 0x00;
+ fis[17] = 0x00;
+ fis[18] = 0x00;
+ fis[19] = 0x00;
+ return 20;
} // end UniataAhciSetupFIS()
Modified: trunk/reactos/drivers/storage/ide/uniata/idedma.rc
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/idedma.rc [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/idedma.rc [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -12,7 +12,7 @@
#define REACTOS_STR_FILE_VERSION VERSION_STR
#define REACTOS_STR_INTERNAL_NAME "uniata.sys"
#define REACTOS_STR_ORIGINAL_FILENAME "uniata.sys"
-#define REACTOS_STR_LEGAL_COPYRIGHT "Copyright 1999-2004 AlterWare, Copyright
2007 ReactOS Team"
+#define REACTOS_STR_LEGAL_COPYRIGHT "Copyright 1999-2008 AlterWare, Copyright
2007 ReactOS Team"
#define REACTOS_STR_PRODUCT_NAME "UniATA Driver for ReactOS"
#define REACTOS_STR_PRODUCT_VERSION VERSION_STR
Modified: trunk/reactos/drivers/storage/ide/uniata/inc/CrossNt.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/inc/CrossNt.h [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/inc/CrossNt.h [iso-8859-1] Fri Nov 28
03:02:24 2008
@@ -7,7 +7,7 @@
#if !defined(NT_INCLUDED)
#include <ntddk.h> // various NT definitions
-#endif
+#endif
#include <stddef.h>
#include <string.h>
Modified: trunk/reactos/drivers/storage/ide/uniata/ntddk_ex.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/ntddk_ex.h [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/ntddk_ex.h [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -8,6 +8,11 @@
#undef ASSERT
#define ASSERT //(x) if (!(x)) {RtlAssert("#x",__FILE__,__LINE__,
""); }
#endif //__REACTOS__
+
+
+#ifndef FILE_CHARACTERISTIC_PNP_DEVICE // DDK 2003
+
+#define FILE_CHARACTERISTIC_PNP_DEVICE 0x00000800
typedef enum _SYSTEM_INFORMATION_CLASS {
SystemBasicInformation,
@@ -125,6 +130,8 @@
#endif //__REACTOS__
} SYSTEM_INFORMATION_CLASS;
+#endif // !FILE_CHARACTERISTIC_PNP_DEVICE
+
NTSYSAPI
NTSTATUS
Modified: trunk/reactos/drivers/storage/ide/uniata/uniata.rbuild
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/uniata.rbuild [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/uniata.rbuild [iso-8859-1] Fri Nov 28
03:02:24 2008
@@ -4,6 +4,7 @@
<bootstrap installbase="$(CDOUTPUT)" />
<include base="uniata">.</include>
<include base="uniata">inc</include>
+ <define name="_DEBUG" />
<library>ntoskrnl</library>
<library>hal</library>
<library>scsiport</library>
Modified: trunk/reactos/drivers/storage/ide/uniata/uniata_ver.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/uniata_ver.h [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/uniata_ver.h [iso-8859-1] Fri Nov 28 03:02:24
2008
@@ -1,6 +1,6 @@
-#define UNIATA_VER_STR "39f"
-#define UNIATA_VER_DOT 0.39.6.0
-#define UNIATA_VER_DOT_COMMA 0,39,6,0
-#define UNIATA_VER_DOT_STR "0.39.6.0"
-#define UNIATA_VER_YEAR 2007
-#define UNIATA_VER_YEAR_STR "2007"
+#define UNIATA_VER_STR "39j"
+#define UNIATA_VER_DOT 0.39.10.0
+#define UNIATA_VER_DOT_COMMA 0,39,10,0
+#define UNIATA_VER_DOT_STR "0.39.10.0"
+#define UNIATA_VER_YEAR 2008
+#define UNIATA_VER_YEAR_STR "2008"