19 Jun
2022
19 Jun
'22
6:29 a.m.
https://git.reactos.org/?p=reactos.git;a=commitdiff;h=4a66cbb224804317cb4be…
commit 4a66cbb224804317cb4bea32c10838f43a820a70
Author: Eric Kohl <eric.kohl(a)reactos.org>
AuthorDate: Sun Jun 19 08:28:53 2022 +0200
Commit: Eric Kohl <eric.kohl(a)reactos.org>
CommitDate: Sun Jun 19 08:28:53 2022 +0200
[DISKPART] Add help text for the FORMAT command
---
base/system/diskpart/diskpart_msg.mc | 667 ++++++++++++++++++++++++++++++++++-
1 file changed, 648 insertions(+), 19 deletions(-)
diff --git a/base/system/diskpart/diskpart_msg.mc b/base/system/diskpart/diskpart_msg.mc
index 07c71702791..45282e2de7d 100644
--- a/base/system/diskpart/diskpart_msg.mc
+++ b/base/system/diskpart/diskpart_msg.mc
@@ -3723,34 +3723,663 @@ SymbolicName=MSG_COMMAND_FORMAT
Severity=Informational
Facility=System
Language=English
-<Add FORMAT command help text here>
+ Formats the specified volume for use with ReactOS.
+
+Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED]
[LABEL=<"label">]
+ [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
+ [NOERR]
+
+ FS=<FS> Specifies the type of file system. If no file system is given,
+ the default file system displayed by the FILESYSTEMS command is
+ used.
+
+ REVISION=<X.XX>
+
+ Specifies the file system revision (if applicable).
+
+ RECOMMENDED If specified, use the recommended file system and revision
+ instead of the default if a recommendation exists. The
+ recommended file system (if one exists) is displayed by the
+ FILESYSTEMS command.
+
+ LABEL=<"label">
+
+ Specifies the volume label.
+
+ UNIT=<N> Overrides the default allocation unit size. Default settings
+ are strongly recommended for general use. The default
+ allocation unit size for a particular file system is displayed
+ by the FILESYSTEMS command.
+
+ NTFS compression is not supported for allocation unit sizes
+ above 4096.
+
+ QUICK Performs a quick format.
+
+ COMPRESS NTFS only: Files created on the new volume will be compressed
+ by default.
+
+ OVERRIDE Forces the file system to dismount first if necessary. All
+ opened handles to the volume would no longer be valid.
+
+ DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
+ higher.
+ This flag instructs the format operation to duplicate the file
+ system meta-data to a second set of sectors on the disk. The
+ duplicate meta-data is used by applications, for example repair
+ or recovery applications. If the primary meta-data sectors are
+ found to be corrupted, the file system meta-data will be read
+ from the duplicate sectors.
+
+ NOWAIT Forces the command to return immediately while the format
+ process is still in progress. If NOWAIT is not specified,
+ DiskPart will display format progress in percentage.
+
+ NOERR For scripting only. When an error is encountered, DiskPart
+ continues to process commands as if the error did not occur.
+ Without the NOERR parameter, an error causes DiskPart to exit
+ with an error code.
+
+ A volume must be selected for this operation to succeed.
+
+Examples:
+
+ FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
+ FORMAT RECOMMENDED OVERRIDE
.
Language=German
-<Add FORMAT command help text here>
+ Formatiert das angegebene Volume für die Verwendung mit ReactOS.
+
+Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED]
[LABEL=<"label">]
+ [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
+ [NOERR]
+
+ FS=<FS> Gibt den Typ des Dateisystems an. Falls kein Dateisystem
+ angegeben wurde, wird das durch den Befehl
+ "FILESYSTEMS" angezeigte Standarddateisystem
+ verwendet.
+
+ REVISION=<X.XX>
+
+ Gibt die Dateisystemversion an (sofern zutreffend).
+
+ RECOMMENDED Sofern angegeben, werden anstelle der Standardein-
+ stellung das empfohlene Dateisystem und die Version verwendet,
+ falls eine Empfehlung vorhanden ist. Das empfohlene Dateisystem
+ (sofern vorhanden) wird durch den Befehl "FILESYSTEMS"
+ angezeigt.
+
+ LABEL=<"label">
+ Gibt die Volumebezeichnung an.
+
+ UNIT=<N> Überschreibt die standardmäßige Größe der
+ Zuteilungseinheit. Für die allgemeine Verwendung
+ werden dringend die Standardeinstellungen
+ empfohlen.
+ Die standardmäßige Größe der Zuteilungseinheit
+ für ein bestimmtes Dateisystem wird durch den
+ Befehl "FILESYSTEMS" angezeigt.
+
+ NTFS-Komprimierung wird für Zuteilungseinheitsgrößen
+ über 4096 nicht unterstützt.
+
+ QUICK Führt eine Schnellformatierung aus.
+
+ COMPRESS nur NTFS: Auf dem neuen Volume erstellte Dateien
+ werden standardmäßig komprimiert.
+
+ OVERRIDE Erzwingt ggf. die Aufhebung der Bereitstellung des
+ Dateisystems als ersten Schritt. Alle geöffneten Handles für
+ das Volume besäßen keine Gültigkeit mehr.
+
+ DUPLICATE nur UDF: Dieses Kennzeichen gilt für das UDF-Format,
+ Version 2.5 oder höher. Durch dieses Kennzeichen wird der
+ Formatvorgang angewiesen, die Dateisystem-Metadaten
+ auf einem zweiten Sektorensatz auf dem Datenträger zu
+ duplizieren. Die duplizierten Metadaten werden von
+ Anwendungen verwendet, beispielsweise für Reparatur-
+ oder Wiederherstellungsanwendungen.
+ Wird festgestellt, dass primäre Metadatensektoren beschädigt
+ sind, werden die Dateisystem-Metadaten aus den doppelten
+ Sektoren gelesen.
+
+ NOWAIT Erzwingt die sofortige Rückgabe des Befehls, während der
+ Formatierungsprozess noch stattfindet. Falls "NOWAIT" nicht
+ angegeben wurde, wird der Fortschritt des Formatierungs-
+ vorgangs von DiskPart in Prozent angezeigt.
+
+ NOERR Nur für Skripting. Wird ein Fehler festgestellt, werden
+ Befehle weiterhin so verarbeitet, als wäre der Fehler
+ nicht aufgetreten. Ohne den Parameter "NOERR"
+ wird DiskPart aufgrund eines Fehlers mit einem
+ Fehlercode beendet.
+
+ Damit dieser Vorgang erfolgreich ist, muss ein Volume ausgewählt werden.
+
+Beispiele:
+
+ FORMAT FS=NTFS LABEL="Neues Volume" QUICK COMPRESS
+ FORMAT RECOMMENDED OVERRIDE
.
Language=Polish
-<Add FORMAT command help text here>
+ Formats the specified volume for use with ReactOS.
+
+Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED]
[LABEL=<"label">]
+ [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
+ [NOERR]
+
+ FS=<FS> Specifies the type of file system. If no file system is given,
+ the default file system displayed by the FILESYSTEMS command is
+ used.
+
+ REVISION=<X.XX>
+
+ Specifies the file system revision (if applicable).
+
+ RECOMMENDED If specified, use the recommended file system and revision
+ instead of the default if a recommendation exists. The
+ recommended file system (if one exists) is displayed by the
+ FILESYSTEMS command.
+
+ LABEL=<"label">
+
+ Specifies the volume label.
+
+ UNIT=<N> Overrides the default allocation unit size. Default settings
+ are strongly recommended for general use. The default
+ allocation unit size for a particular file system is displayed
+ by the FILESYSTEMS command.
+
+ NTFS compression is not supported for allocation unit sizes
+ above 4096.
+
+ QUICK Performs a quick format.
+
+ COMPRESS NTFS only: Files created on the new volume will be compressed
+ by default.
+
+ OVERRIDE Forces the file system to dismount first if necessary. All
+ opened handles to the volume would no longer be valid.
+
+ DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
+ higher.
+ This flag instructs the format operation to duplicate the file
+ system meta-data to a second set of sectors on the disk. The
+ duplicate meta-data is used by applications, for example repair
+ or recovery applications. If the primary meta-data sectors are
+ found to be corrupted, the file system meta-data will be read
+ from the duplicate sectors.
+
+ NOWAIT Forces the command to return immediately while the format
+ process is still in progress. If NOWAIT is not specified,
+ DiskPart will display format progress in percentage.
+
+ NOERR For scripting only. When an error is encountered, DiskPart
+ continues to process commands as if the error did not occur.
+ Without the NOERR parameter, an error causes DiskPart to exit
+ with an error code.
+
+ A volume must be selected for this operation to succeed.
+
+Examples:
+
+ FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
+ FORMAT RECOMMENDED OVERRIDE
.
Language=Portugese
-<Add FORMAT command help text here>
+ Formats the specified volume for use with ReactOS.
+
+Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED]
[LABEL=<"label">]
+ [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
+ [NOERR]
+
+ FS=<FS> Specifies the type of file system. If no file system is given,
+ the default file system displayed by the FILESYSTEMS command is
+ used.
+
+ REVISION=<X.XX>
+
+ Specifies the file system revision (if applicable).
+
+ RECOMMENDED If specified, use the recommended file system and revision
+ instead of the default if a recommendation exists. The
+ recommended file system (if one exists) is displayed by the
+ FILESYSTEMS command.
+
+ LABEL=<"label">
+
+ Specifies the volume label.
+
+ UNIT=<N> Overrides the default allocation unit size. Default settings
+ are strongly recommended for general use. The default
+ allocation unit size for a particular file system is displayed
+ by the FILESYSTEMS command.
+
+ NTFS compression is not supported for allocation unit sizes
+ above 4096.
+
+ QUICK Performs a quick format.
+
+ COMPRESS NTFS only: Files created on the new volume will be compressed
+ by default.
+
+ OVERRIDE Forces the file system to dismount first if necessary. All
+ opened handles to the volume would no longer be valid.
+
+ DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
+ higher.
+ This flag instructs the format operation to duplicate the file
+ system meta-data to a second set of sectors on the disk. The
+ duplicate meta-data is used by applications, for example repair
+ or recovery applications. If the primary meta-data sectors are
+ found to be corrupted, the file system meta-data will be read
+ from the duplicate sectors.
+
+ NOWAIT Forces the command to return immediately while the format
+ process is still in progress. If NOWAIT is not specified,
+ DiskPart will display format progress in percentage.
+
+ NOERR For scripting only. When an error is encountered, DiskPart
+ continues to process commands as if the error did not occur.
+ Without the NOERR parameter, an error causes DiskPart to exit
+ with an error code.
+
+ A volume must be selected for this operation to succeed.
+
+Examples:
+
+ FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
+ FORMAT RECOMMENDED OVERRIDE
.
Language=Romanian
-<Add FORMAT command help text here>
+ Formats the specified volume for use with ReactOS.
+
+Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED]
[LABEL=<"label">]
+ [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
+ [NOERR]
+
+ FS=<FS> Specifies the type of file system. If no file system is given,
+ the default file system displayed by the FILESYSTEMS command is
+ used.
+
+ REVISION=<X.XX>
+
+ Specifies the file system revision (if applicable).
+
+ RECOMMENDED If specified, use the recommended file system and revision
+ instead of the default if a recommendation exists. The
+ recommended file system (if one exists) is displayed by the
+ FILESYSTEMS command.
+
+ LABEL=<"label">
+
+ Specifies the volume label.
+
+ UNIT=<N> Overrides the default allocation unit size. Default settings
+ are strongly recommended for general use. The default
+ allocation unit size for a particular file system is displayed
+ by the FILESYSTEMS command.
+
+ NTFS compression is not supported for allocation unit sizes
+ above 4096.
+
+ QUICK Performs a quick format.
+
+ COMPRESS NTFS only: Files created on the new volume will be compressed
+ by default.
+
+ OVERRIDE Forces the file system to dismount first if necessary. All
+ opened handles to the volume would no longer be valid.
+
+ DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
+ higher.
+ This flag instructs the format operation to duplicate the file
+ system meta-data to a second set of sectors on the disk. The
+ duplicate meta-data is used by applications, for example repair
+ or recovery applications. If the primary meta-data sectors are
+ found to be corrupted, the file system meta-data will be read
+ from the duplicate sectors.
+
+ NOWAIT Forces the command to return immediately while the format
+ process is still in progress. If NOWAIT is not specified,
+ DiskPart will display format progress in percentage.
+
+ NOERR For scripting only. When an error is encountered, DiskPart
+ continues to process commands as if the error did not occur.
+ Without the NOERR parameter, an error causes DiskPart to exit
+ with an error code.
+
+ A volume must be selected for this operation to succeed.
+
+Examples:
+
+ FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
+ FORMAT RECOMMENDED OVERRIDE
.
Language=Russian
-<Add FORMAT command help text here>
+ Formats the specified volume for use with ReactOS.
+
+Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED]
[LABEL=<"label">]
+ [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
+ [NOERR]
+
+ FS=<FS> Specifies the type of file system. If no file system is given,
+ the default file system displayed by the FILESYSTEMS command is
+ used.
+
+ REVISION=<X.XX>
+
+ Specifies the file system revision (if applicable).
+
+ RECOMMENDED If specified, use the recommended file system and revision
+ instead of the default if a recommendation exists. The
+ recommended file system (if one exists) is displayed by the
+ FILESYSTEMS command.
+
+ LABEL=<"label">
+
+ Specifies the volume label.
+
+ UNIT=<N> Overrides the default allocation unit size. Default settings
+ are strongly recommended for general use. The default
+ allocation unit size for a particular file system is displayed
+ by the FILESYSTEMS command.
+
+ NTFS compression is not supported for allocation unit sizes
+ above 4096.
+
+ QUICK Performs a quick format.
+
+ COMPRESS NTFS only: Files created on the new volume will be compressed
+ by default.
+
+ OVERRIDE Forces the file system to dismount first if necessary. All
+ opened handles to the volume would no longer be valid.
+
+ DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
+ higher.
+ This flag instructs the format operation to duplicate the file
+ system meta-data to a second set of sectors on the disk. The
+ duplicate meta-data is used by applications, for example repair
+ or recovery applications. If the primary meta-data sectors are
+ found to be corrupted, the file system meta-data will be read
+ from the duplicate sectors.
+
+ NOWAIT Forces the command to return immediately while the format
+ process is still in progress. If NOWAIT is not specified,
+ DiskPart will display format progress in percentage.
+
+ NOERR For scripting only. When an error is encountered, DiskPart
+ continues to process commands as if the error did not occur.
+ Without the NOERR parameter, an error causes DiskPart to exit
+ with an error code.
+
+ A volume must be selected for this operation to succeed.
+
+Examples:
+
+ FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
+ FORMAT RECOMMENDED OVERRIDE
.
Language=Albanian
-<Add FORMAT command help text here>
+ Formats the specified volume for use with ReactOS.
+
+Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED]
[LABEL=<"label">]
+ [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
+ [NOERR]
+
+ FS=<FS> Specifies the type of file system. If no file system is given,
+ the default file system displayed by the FILESYSTEMS command is
+ used.
+
+ REVISION=<X.XX>
+
+ Specifies the file system revision (if applicable).
+
+ RECOMMENDED If specified, use the recommended file system and revision
+ instead of the default if a recommendation exists. The
+ recommended file system (if one exists) is displayed by the
+ FILESYSTEMS command.
+
+ LABEL=<"label">
+
+ Specifies the volume label.
+
+ UNIT=<N> Overrides the default allocation unit size. Default settings
+ are strongly recommended for general use. The default
+ allocation unit size for a particular file system is displayed
+ by the FILESYSTEMS command.
+
+ NTFS compression is not supported for allocation unit sizes
+ above 4096.
+
+ QUICK Performs a quick format.
+
+ COMPRESS NTFS only: Files created on the new volume will be compressed
+ by default.
+
+ OVERRIDE Forces the file system to dismount first if necessary. All
+ opened handles to the volume would no longer be valid.
+
+ DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
+ higher.
+ This flag instructs the format operation to duplicate the file
+ system meta-data to a second set of sectors on the disk. The
+ duplicate meta-data is used by applications, for example repair
+ or recovery applications. If the primary meta-data sectors are
+ found to be corrupted, the file system meta-data will be read
+ from the duplicate sectors.
+
+ NOWAIT Forces the command to return immediately while the format
+ process is still in progress. If NOWAIT is not specified,
+ DiskPart will display format progress in percentage.
+
+ NOERR For scripting only. When an error is encountered, DiskPart
+ continues to process commands as if the error did not occur.
+ Without the NOERR parameter, an error causes DiskPart to exit
+ with an error code.
+
+ A volume must be selected for this operation to succeed.
+
+Examples:
+
+ FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
+ FORMAT RECOMMENDED OVERRIDE
.
Language=Turkish
-<Add FORMAT command help text here>
+ Formats the specified volume for use with ReactOS.
+
+Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED]
[LABEL=<"label">]
+ [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
+ [NOERR]
+
+ FS=<FS> Specifies the type of file system. If no file system is given,
+ the default file system displayed by the FILESYSTEMS command is
+ used.
+
+ REVISION=<X.XX>
+
+ Specifies the file system revision (if applicable).
+
+ RECOMMENDED If specified, use the recommended file system and revision
+ instead of the default if a recommendation exists. The
+ recommended file system (if one exists) is displayed by the
+ FILESYSTEMS command.
+
+ LABEL=<"label">
+
+ Specifies the volume label.
+
+ UNIT=<N> Overrides the default allocation unit size. Default settings
+ are strongly recommended for general use. The default
+ allocation unit size for a particular file system is displayed
+ by the FILESYSTEMS command.
+
+ NTFS compression is not supported for allocation unit sizes
+ above 4096.
+
+ QUICK Performs a quick format.
+
+ COMPRESS NTFS only: Files created on the new volume will be compressed
+ by default.
+
+ OVERRIDE Forces the file system to dismount first if necessary. All
+ opened handles to the volume would no longer be valid.
+
+ DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
+ higher.
+ This flag instructs the format operation to duplicate the file
+ system meta-data to a second set of sectors on the disk. The
+ duplicate meta-data is used by applications, for example repair
+ or recovery applications. If the primary meta-data sectors are
+ found to be corrupted, the file system meta-data will be read
+ from the duplicate sectors.
+
+ NOWAIT Forces the command to return immediately while the format
+ process is still in progress. If NOWAIT is not specified,
+ DiskPart will display format progress in percentage.
+
+ NOERR For scripting only. When an error is encountered, DiskPart
+ continues to process commands as if the error did not occur.
+ Without the NOERR parameter, an error causes DiskPart to exit
+ with an error code.
+
+ A volume must be selected for this operation to succeed.
+
+Examples:
+
+ FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
+ FORMAT RECOMMENDED OVERRIDE
.
Language=Chinese
-<Add FORMAT command help text here>
+ Formats the specified volume for use with ReactOS.
+
+Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED]
[LABEL=<"label">]
+ [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
+ [NOERR]
+
+ FS=<FS> Specifies the type of file system. If no file system is given,
+ the default file system displayed by the FILESYSTEMS command is
+ used.
+
+ REVISION=<X.XX>
+
+ Specifies the file system revision (if applicable).
+
+ RECOMMENDED If specified, use the recommended file system and revision
+ instead of the default if a recommendation exists. The
+ recommended file system (if one exists) is displayed by the
+ FILESYSTEMS command.
+
+ LABEL=<"label">
+
+ Specifies the volume label.
+
+ UNIT=<N> Overrides the default allocation unit size. Default settings
+ are strongly recommended for general use. The default
+ allocation unit size for a particular file system is displayed
+ by the FILESYSTEMS command.
+
+ NTFS compression is not supported for allocation unit sizes
+ above 4096.
+
+ QUICK Performs a quick format.
+
+ COMPRESS NTFS only: Files created on the new volume will be compressed
+ by default.
+
+ OVERRIDE Forces the file system to dismount first if necessary. All
+ opened handles to the volume would no longer be valid.
+
+ DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
+ higher.
+ This flag instructs the format operation to duplicate the file
+ system meta-data to a second set of sectors on the disk. The
+ duplicate meta-data is used by applications, for example repair
+ or recovery applications. If the primary meta-data sectors are
+ found to be corrupted, the file system meta-data will be read
+ from the duplicate sectors.
+
+ NOWAIT Forces the command to return immediately while the format
+ process is still in progress. If NOWAIT is not specified,
+ DiskPart will display format progress in percentage.
+
+ NOERR For scripting only. When an error is encountered, DiskPart
+ continues to process commands as if the error did not occur.
+ Without the NOERR parameter, an error causes DiskPart to exit
+ with an error code.
+
+ A volume must be selected for this operation to succeed.
+
+Examples:
+
+ FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
+ FORMAT RECOMMENDED OVERRIDE
.
Language=Taiwanese
-<Add FORMAT command help text here>
+ Formats the specified volume for use with ReactOS.
+
+Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED]
[LABEL=<"label">]
+ [UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
+ [NOERR]
+
+ FS=<FS> Specifies the type of file system. If no file system is given,
+ the default file system displayed by the FILESYSTEMS command is
+ used.
+
+ REVISION=<X.XX>
+
+ Specifies the file system revision (if applicable).
+
+ RECOMMENDED If specified, use the recommended file system and revision
+ instead of the default if a recommendation exists. The
+ recommended file system (if one exists) is displayed by the
+ FILESYSTEMS command.
+
+ LABEL=<"label">
+
+ Specifies the volume label.
+
+ UNIT=<N> Overrides the default allocation unit size. Default settings
+ are strongly recommended for general use. The default
+ allocation unit size for a particular file system is displayed
+ by the FILESYSTEMS command.
+
+ NTFS compression is not supported for allocation unit sizes
+ above 4096.
+
+ QUICK Performs a quick format.
+
+ COMPRESS NTFS only: Files created on the new volume will be compressed
+ by default.
+
+ OVERRIDE Forces the file system to dismount first if necessary. All
+ opened handles to the volume would no longer be valid.
+
+ DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
+ higher.
+ This flag instructs the format operation to duplicate the file
+ system meta-data to a second set of sectors on the disk. The
+ duplicate meta-data is used by applications, for example repair
+ or recovery applications. If the primary meta-data sectors are
+ found to be corrupted, the file system meta-data will be read
+ from the duplicate sectors.
+
+ NOWAIT Forces the command to return immediately while the format
+ process is still in progress. If NOWAIT is not specified,
+ DiskPart will display format progress in percentage.
+
+ NOERR For scripting only. When an error is encountered, DiskPart
+ continues to process commands as if the error did not occur.
+ Without the NOERR parameter, an error causes DiskPart to exit
+ with an error code.
+
+ A volume must be selected for this operation to succeed.
+
+Examples:
+
+ FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
+ FORMAT RECOMMENDED OVERRIDE
.
@@ -4005,7 +4634,7 @@ Syntax: INACTIVE
Your computer might not start without an active partition. Do not mark
a system or boot partition as inactive unless you are an experienced
- user with a thorough understanding of Windows storage management.
+ user with a thorough understanding of ReactOS storage management.
Example:
@@ -4054,7 +4683,7 @@ Syntax: INACTIVE
Your computer might not start without an active partition. Do not mark
a system or boot partition as inactive unless you are an experienced
- user with a thorough understanding of Windows storage management.
+ user with a thorough understanding of ReactOS storage management.
Example:
@@ -4077,7 +4706,7 @@ Syntax: INACTIVE
Your computer might not start without an active partition. Do not mark
a system or boot partition as inactive unless you are an experienced
- user with a thorough understanding of Windows storage management.
+ user with a thorough understanding of ReactOS storage management.
Example:
@@ -4100,7 +4729,7 @@ Syntax: INACTIVE
Your computer might not start without an active partition. Do not mark
a system or boot partition as inactive unless you are an experienced
- user with a thorough understanding of Windows storage management.
+ user with a thorough understanding of ReactOS storage management.
Example:
@@ -4123,7 +4752,7 @@ Syntax: INACTIVE
Your computer might not start without an active partition. Do not mark
a system or boot partition as inactive unless you are an experienced
- user with a thorough understanding of Windows storage management.
+ user with a thorough understanding of ReactOS storage management.
Example:
@@ -4146,7 +4775,7 @@ Syntax: INACTIVE
Your computer might not start without an active partition. Do not mark
a system or boot partition as inactive unless you are an experienced
- user with a thorough understanding of Windows storage management.
+ user with a thorough understanding of ReactOS storage management.
Example:
@@ -4169,7 +4798,7 @@ Syntax: INACTIVE
Your computer might not start without an active partition. Do not mark
a system or boot partition as inactive unless you are an experienced
- user with a thorough understanding of Windows storage management.
+ user with a thorough understanding of ReactOS storage management.
Example:
@@ -4192,7 +4821,7 @@ Syntax: INACTIVE
Your computer might not start without an active partition. Do not mark
a system or boot partition as inactive unless you are an experienced
- user with a thorough understanding of Windows storage management.
+ user with a thorough understanding of ReactOS storage management.
Example:
@@ -4215,7 +4844,7 @@ Syntax: INACTIVE
Your computer might not start without an active partition. Do not mark
a system or boot partition as inactive unless you are an experienced
- user with a thorough understanding of Windows storage management.
+ user with a thorough understanding of ReactOS storage management.
Example:
874
days inactive
874
days old
0 comments
1 participants
participants (1)
-
Eric Kohl