[tfaber] 64518: [NTOS:FORMATTING] - Remove some trailing whitespace

Author: tfaber
Date: Sat Oct  4 08:43:15 2014
New Revision: 64518

URL: http://svn.reactos.org/svn/reactos?rev=64518&view=rev
Log:
[NTOS:FORMATTING]
- Remove some trailing whitespace

Modified:
    trunk/reactos/ntoskrnl/ke/i386/context.c
    trunk/reactos/ntoskrnl/ke/i386/ctxswitch.S
    trunk/reactos/ntoskrnl/ke/i386/irqobj.c
    trunk/reactos/ntoskrnl/ke/i386/traphdlr.c

Modified: trunk/reactos/ntoskrnl/ke/i386/context.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/ntoskrnl/ke/i386/context.c…
==============================================================================
--- trunk/reactos/ntoskrnl/ke/i386/context.c	[iso-8859-1] (original)
+++ trunk/reactos/ntoskrnl/ke/i386/context.c	[iso-8859-1] Sat Oct  4 08:43:15 2014
@@ -24,7 +24,7 @@
     PKIPCR Pcr = (PKIPCR)KeGetPcr();
 #ifdef CONFIG_SMP
     LONG SetMember;
-    
+
     /* Update active processor mask */
     SetMember = (LONG)Pcr->SetMember;
     InterlockedXor((PLONG)&NewProcess->ActiveProcessors, SetMember);
@@ -38,13 +38,13 @@
         UNIMPLEMENTED_DBGBREAK();
         return;
     }
-    
+
     /* Update CR3 */
     __writecr3(NewProcess->DirectoryTableBase[0]);
-    
+
     /* Clear GS */
     Ke386SetGs(0);
-    
+
     /* Update IOPM offset */
     Pcr->TSS->IoMapBase = NewProcess->IopmOffset;
 }

Modified: trunk/reactos/ntoskrnl/ke/i386/ctxswitch.S
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/ntoskrnl/ke/i386/ctxswitch…
==============================================================================
--- trunk/reactos/ntoskrnl/ke/i386/ctxswitch.S	[iso-8859-1] (original)
+++ trunk/reactos/ntoskrnl/ke/i386/ctxswitch.S	[iso-8859-1] Sat Oct  4 08:43:15 2014
@@ -3,7 +3,7 @@
  * PROJECT:         ReactOS kernel
  * FILE:            ntoskrnl/ke/i386/ctxswitch.S
  * PURPOSE:         Thread Context Switching
- * 
+ *
  * PROGRAMMERS:     Alex Ionescu (alex(a)relsoft.net)
  *                  Gregor Anich (FPU Code)
  */
@@ -63,7 +63,7 @@
     /* Load the new kernel stack and switch OS to new thread */
     mov esp, edx
     call @KiSwapContextExit@8
-    
+
     /* Now we're on the new thread. Return to the caller to restore registers */
     add esp, 2 * 4
     ret

Modified: trunk/reactos/ntoskrnl/ke/i386/irqobj.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/ntoskrnl/ke/i386/irqobj.c?…
==============================================================================
--- trunk/reactos/ntoskrnl/ke/i386/irqobj.c	[iso-8859-1] (original)
+++ trunk/reactos/ntoskrnl/ke/i386/irqobj.c	[iso-8859-1] Sat Oct  4 08:43:15 2014
@@ -143,7 +143,7 @@
         _disable();
         HalEndSystemInterrupt(OldIrql, TrapFrame);
     }
-    
+
     /* Now exit the trap */
     KiEoiHelper(TrapFrame);
 }
@@ -154,25 +154,25 @@
     /* Crash the machine */
     KeBugCheck(TRAP_CAUSE_UNKNOWN);
 }
-    
+
 VOID
 FASTCALL
 KiUnexpectedInterruptTailHandler(IN PKTRAP_FRAME TrapFrame)
 {
     KIRQL OldIrql;
-    
+
     /* Enter trap */
     KiEnterInterruptTrap(TrapFrame);
-    
+
     /* Increase interrupt count */
     KeGetCurrentPrcb()->InterruptCount++;
-    
+
     /* Start the interrupt */
     if (HalBeginSystemInterrupt(HIGH_LEVEL, TrapFrame->ErrCode, &OldIrql))
     {
         /* Warn user */
         DPRINT1("\n\x7\x7!!! Unexpected Interrupt 0x%02lx !!!\n",
TrapFrame->ErrCode);
-        
+
         /* Now call the epilogue code */
         KiExitInterrupt(TrapFrame, OldIrql, FALSE);
     }
@@ -194,12 +194,12 @@
 FASTCALL
 KiInterruptDispatch(IN PKTRAP_FRAME TrapFrame,
                     IN PKINTERRUPT Interrupt)
-{       
+{
     KIRQL OldIrql;
 
     /* Increase interrupt count */
     KeGetCurrentPrcb()->InterruptCount++;
-    
+
     /* Begin the interrupt, making sure it's not spurious */
     if (HalBeginSystemInterrupt(Interrupt->SynchronizeIrql,
                                 Interrupt->Vector,
@@ -207,13 +207,13 @@
     {
         /* Acquire interrupt lock */
         KxAcquireSpinLock(Interrupt->ActualLock);
-        
+
         /* Call the ISR */
         Interrupt->ServiceRoutine(Interrupt, Interrupt->ServiceContext);
-        
+
         /* Release interrupt lock */
         KxReleaseSpinLock(Interrupt->ActualLock);
-        
+
         /* Now call the epilogue code */
         KiExitInterrupt(TrapFrame, OldIrql, FALSE);
     }
@@ -252,7 +252,7 @@
                 /* Raise to higher IRQL */
                 OldInterruptIrql = KfRaiseIrql(Interrupt->SynchronizeIrql);
             }
-        
+
             /* Acquire interrupt lock */
             KxAcquireSpinLock(Interrupt->ActualLock);
 
@@ -262,7 +262,7 @@
 
             /* Release interrupt lock */
             KxReleaseSpinLock(Interrupt->ActualLock);
-        
+
             /* Check if this interrupt's IRQL is higher than the current one */
             if (Interrupt->SynchronizeIrql > Interrupt->Irql)
             {
@@ -270,23 +270,23 @@
                 ASSERT(OldInterruptIrql == Interrupt->Irql);
                 KfLowerIrql(OldInterruptIrql);
             }
-        
+
             /* Check if the interrupt got handled and it's level */
             if ((Handled) && (Interrupt->Mode == LevelSensitive)) break;
-            
+
             /* What's next? */
             NextEntry = NextEntry->Flink;
-                
+
             /* Is this the last one? */
             if (NextEntry == ListHead)
             {
                 /* Level should not have gotten here */
                 if (Interrupt->Mode == LevelSensitive) break;
-                
+
                 /* As for edge, we can only exit once nobody can handle the interrupt */
                 if (!Handled) break;
             }
-            
+
             /* Get the interrupt object for the next pass */
             Interrupt = CONTAINING_RECORD(NextEntry, KINTERRUPT, InterruptListEntry);
         }
@@ -575,22 +575,22 @@
 {
     BOOLEAN Success;
     KIRQL OldIrql;
-    
+
     /* Raise IRQL */
     OldIrql = KfRaiseIrql(Interrupt->SynchronizeIrql);
-    
+
     /* Acquire interrupt spinlock */
     KeAcquireSpinLockAtDpcLevel(Interrupt->ActualLock);
-    
+
     /* Call the routine */
     Success = SynchronizeRoutine(SynchronizeContext);
-    
+
     /* Release lock */
     KeReleaseSpinLockFromDpcLevel(Interrupt->ActualLock);
-    
+
     /* Lower IRQL */
     KfLowerIrql(OldIrql);
-    
+
     /* Return status */
     return Success;
 }

Modified: trunk/reactos/ntoskrnl/ke/i386/traphdlr.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/ntoskrnl/ke/i386/traphdlr.…
==============================================================================
--- trunk/reactos/ntoskrnl/ke/i386/traphdlr.c	[iso-8859-1] (original)
+++ trunk/reactos/ntoskrnl/ke/i386/traphdlr.c	[iso-8859-1] Sat Oct  4 08:43:15 2014
@@ -147,13 +147,13 @@
 {
     ASSERT((TrapFrame->EFlags & EFLAGS_V86_MASK) == 0);
     ASSERT(!KiIsFrameEdited(TrapFrame));
-    
+
     /* Copy the status into EAX */
     TrapFrame->Eax = Status;
-    
+
     /* Common trap exit code */
     KiCommonExit(TrapFrame, FALSE);
-    
+
     /* Restore previous mode */
     KeGetCurrentThread()->PreviousMode = (CCHAR)TrapFrame->PreviousPreviousMode;
 
@@ -184,10 +184,10 @@
 {
     /* Common trap exit code */
     KiCommonExit(TrapFrame, FALSE);
-    
+
     /* Restore previous mode */
     KeGetCurrentThread()->PreviousMode = (CCHAR)TrapFrame->PreviousPreviousMode;
-    
+
     /* Check if this was a V8086 trap */
     if (TrapFrame->EFlags & EFLAGS_V86_MASK) KiTrapReturnNoSegments(TrapFrame);
 
@@ -282,14 +282,14 @@
     /* Clear the TS bit and re-enable interrupts */
     SaveArea->Cr0NpxState &= ~CR0_TS;
     _enable();
-    
+
     /* Check if we should get the FN or FX error */
     if (KeI386FxsrPresent)
     {
         /* Get it from FX */
         Mask = SaveArea->U.FxArea.ControlWord;
         Error = SaveArea->U.FxArea.StatusWord;
-        
+
         /* Get the FPU exception address too */
         ErrorOffset = SaveArea->U.FxArea.ErrorOffset;
         DataOffset = SaveArea->U.FxArea.DataOffset;
@@ -299,7 +299,7 @@
         /* Get it from FN */
         Mask = SaveArea->U.FnArea.ControlWord;
         Error = SaveArea->U.FnArea.StatusWord;
-        
+
         /* Get the FPU exception address too */
         ErrorOffset = SaveArea->U.FnArea.ErrorOffset;
         DataOffset = SaveArea->U.FnArea.DataOffset;
@@ -338,7 +338,7 @@
                                  0,
                                  TrapFrame);
     }
-    
+
     /* Check for divide by zero */
     if (Error & FSW_ZERO_DIVIDE)
     {
@@ -348,7 +348,7 @@
                                  0,
                                  TrapFrame);
     }
-    
+
     /* Check for denormal */
     if (Error & FSW_DENORMAL)
     {
@@ -358,7 +358,7 @@
                                  0,
                                  TrapFrame);
     }
-    
+
     /* Check for overflow */
     if (Error & FSW_OVERFLOW)
     {
@@ -368,7 +368,7 @@
                                  0,
                                  TrapFrame);
     }
-    
+
     /* Check for underflow */
     if (Error & FSW_UNDERFLOW)
     {
@@ -388,7 +388,7 @@
                                  0,
                                  TrapFrame);
     }
-    
+
     /* Unknown FPU fault */
     KeBugCheckWithTf(TRAP_CAUSE_UNKNOWN, 1, Error, 0, 0, TrapFrame);
 }
@@ -400,13 +400,13 @@
 {
     /* Save trap frame */
     KiEnterTrap(TrapFrame);
-    
+
     /* Check for VDM trap */
     ASSERT((KiVdmTrap(TrapFrame)) == FALSE);
 
     /*  Enable interrupts */
     _enable();
-    
+
     /* Dispatch the exception */
     KiDispatchException0Args(STATUS_INTEGER_DIVIDE_BY_ZERO,
                              TrapFrame->Eip,
@@ -458,7 +458,7 @@
     PKGDTENTRY TssGdt;
     KTRAP_FRAME TrapFrame;
     KIRQL OldIrql;
-    
+
     //
     // In some sort of strange recursion case, we might end up here with the IF
     // flag incorrectly on the interrupt frame -- during a normal NMI this would
@@ -475,14 +475,14 @@
     Tss = PCR->TSS;
     Thread = ((PKIPCR)PCR)->PrcbData.CurrentThread;
     Process = Thread->ApcState.Process;
-    
+
     //
     // Save data usually not in the TSS
     //
     Tss->CR3 = Process->DirectoryTableBase[0];
     Tss->IoMapBase = Process->IopmOffset;
     Tss->LDT = Process->LdtDescriptor.LimitLow ? KGDT_LDT : 0;
-    
+
     //
     // Now get the base address of the NMI TSS
     //
@@ -490,7 +490,7 @@
     NmiTss = (PKTSS)(ULONG_PTR)(TssGdt->BaseLow |
                                 TssGdt->HighWord.Bytes.BaseMid << 16 |
                                 TssGdt->HighWord.Bytes.BaseHi << 24);
-                    
+
     //
     // Switch to it and activate it, masking off the nested flag
     //
@@ -502,7 +502,7 @@
     TssGdt->HighWord.Bits.Dpl = 0;
     TssGdt->HighWord.Bits.Pres = 1;
     TssGdt->HighWord.Bits.Type = I386_TSS;
-    
+
     //
     // Now build the trap frame based on the original TSS
     //
@@ -532,12 +532,12 @@
     TrapFrame.SegGs = Tss->Gs;
     TrapFrame.DbgEip = Tss->Eip;
     TrapFrame.DbgEbp = Tss->Ebp;
-    
+
     //
     // Store the trap frame in the KPRCB
     //
     KiSaveProcessorState(&TrapFrame, NULL);
-    
+
     //
     // Call any registered NMI handlers and see if they handled it or not
     //
@@ -569,25 +569,25 @@
         // Restore original TSS
         //
         PCR->TSS = Tss;
-        
+
         //
         // Set it back to busy
         //
         TssGdt->HighWord.Bits.Dpl = 0;
         TssGdt->HighWord.Bits.Pres = 1;
         TssGdt->HighWord.Bits.Type = I386_ACTIVE_TSS;
-        
+
         //
         // Restore nested flag
         //
         __writeeflags(__readeflags() | EFLAGS_NESTED_TASK);
-        
+
         //
         // Handled, return from interrupt
         //
         KiIret();
     }
-    
+
     //
     // Unhandled: crash the system
     //
@@ -601,7 +601,7 @@
 {
     /* Save trap frame */
     KiEnterTrap(TrapFrame);
-    
+
     /* Continue with the common handler */
     KiDebugHandler(TrapFrame, BREAKPOINT_BREAK, 0, 0);
 }
@@ -613,13 +613,13 @@
 {
     /* Save trap frame */
     KiEnterTrap(TrapFrame);
-    
+
     /* Check for VDM trap */
     ASSERT((KiVdmTrap(TrapFrame)) == FALSE);
 
      /* Enable interrupts */
     _enable();
-    
+
     /* Dispatch the exception */
     KiDispatchException0Args(STATUS_INTEGER_OVERFLOW,
                              TrapFrame->Eip - 1,
@@ -633,16 +633,16 @@
 {
     /* Save trap frame */
     KiEnterTrap(TrapFrame);
-    
+
     /* Check for VDM trap */
     ASSERT((KiVdmTrap(TrapFrame)) == FALSE);
-    
+
     /* Check for kernel-mode fault */
     if (!KiUserTrap(TrapFrame)) KiSystemFatalException(EXCEPTION_BOUND_CHECK,
TrapFrame);
 
     /* Enable interrupts */
     _enable();
-    
+
     /* Dispatch the exception */
     KiDispatchException0Args(STATUS_ARRAY_BOUNDS_EXCEEDED,
                              TrapFrame->Eip,
@@ -657,56 +657,56 @@
     PUCHAR Instruction;
     ULONG i;
     KIRQL OldIrql;
-    
+
     /* Check for V86 GPF */
     if (__builtin_expect(KiV86Trap(TrapFrame), 1))
     {
         /* Enter V86 trap */
         KiEnterV86Trap(TrapFrame);
-        
+
         /* Must be a VDM process */
         if (__builtin_expect(!PsGetCurrentProcess()->VdmObjects, 0))
         {
             /* Enable interrupts */
             _enable();
-            
+
             /* Setup illegal instruction fault */
             KiDispatchException0Args(STATUS_ILLEGAL_INSTRUCTION,
                                      TrapFrame->Eip,
                                      TrapFrame);
         }
-        
+
         /* Go to APC level */
         OldIrql = KfRaiseIrql(APC_LEVEL);
         _enable();
-        
+
         /* Check for BOP */
         if (!VdmDispatchBop(TrapFrame))
         {
             /* Should only happen in VDM mode */
             UNIMPLEMENTED_FATAL();
         }
-        
+
         /* Bring IRQL back */
         KfLowerIrql(OldIrql);
         _disable();
-        
+
         /* Do a quick V86 exit if possible */
         KiExitV86Trap(TrapFrame);
     }
 
     /* Save trap frame */
     KiEnterTrap(TrapFrame);
-    
+
     /* Enable interrupts */
     Instruction = (PUCHAR)TrapFrame->Eip;
     _enable();
-        
+
     /* Check for user trap */
     if (KiUserTrap(TrapFrame))
     {
         /* FIXME: Use SEH */
-        
+
         /* Scan next 4 opcodes */
         for (i = 0; i < 4; i++)
         {
@@ -719,15 +719,15 @@
                                          TrapFrame);
             }
         }
-        
+
         /* FIXME: SEH ends here */
     }
-    
+
     /* Kernel-mode or user-mode fault (but not LOCK) */
     KiDispatchException0Args(STATUS_ILLEGAL_INSTRUCTION,
                              TrapFrame->Eip,
                              TrapFrame);
-    
+
 }
 
 DECLSPEC_NORETURN
@@ -738,7 +738,7 @@
     PKTHREAD Thread, NpxThread;
     PFX_SAVE_AREA SaveArea, NpxSaveArea;
     ULONG Cr0;
-    
+
     /* Save trap frame */
     KiEnterTrap(TrapFrame);
 
@@ -757,7 +757,7 @@
             /* Not implemented */
             UNIMPLEMENTED_FATAL();
         }
-    
+
         /* Save CR0 and check NPX state */
         Cr0 = __readcr0();
         if (Thread->NpxState != NPX_STATE_LOADED)
@@ -765,14 +765,14 @@
             /* Update CR0 */
             Cr0 &= ~(CR0_MP | CR0_EM | CR0_TS);
             __writecr0(Cr0);
-        
+
             /* Get the NPX thread */
             NpxThread = KeGetCurrentPrcb()->NpxThread;
             if (NpxThread)
             {
                 /* Get the NPX frame */
                 NpxSaveArea = KiGetThreadNpxArea(NpxThread);
-                
+
                 /* Save FPU state */
                 DPRINT("FIXME: Save FPU state: %p\n", NpxSaveArea);
                 //Ke386SaveFpuState(NpxSaveArea);
@@ -780,32 +780,32 @@
                 /* Update NPX state */
                 NpxThread->NpxState = NPX_STATE_NOT_LOADED;
            }
-       
+
             /* Load FPU state */
             //Ke386LoadFpuState(SaveArea);
-        
+
             /* Update NPX state */
             Thread->NpxState = NPX_STATE_LOADED;
             KeGetCurrentPrcb()->NpxThread = Thread;
-        
+
             /* Enable interrupts */
             _enable();
-        
+
             /* Check if CR0 needs to be reloaded due to context switch */
             if (!SaveArea->Cr0NpxState) KiEoiHelper(TrapFrame);
-        
+
             /* Otherwise, we need to reload CR0, disable interrupts */
             _disable();
-        
+
             /* Reload CR0 */
             Cr0 = __readcr0();
             Cr0 |= SaveArea->Cr0NpxState;
             __writecr0(Cr0);
-        
+
             /* Now restore interrupts and check for TS */
             _enable();
             if (Cr0 & CR0_TS) KiEoiHelper(TrapFrame);
-        
+
             /* We're still here -- clear TS and try again */
             __writecr0(__readcr0() &~ CR0_TS);
             _disable();
@@ -816,7 +816,7 @@
             break;
         }
     }
-    
+
     /* TS should not be set */
     if (Cr0 & CR0_TS)
     {
@@ -831,11 +831,11 @@
             __writecr0(__readcr0() &~ CR0_TS);
             KiEoiHelper(TrapFrame);
         }
-        
+
         /* Otherwise, something strange is going on */
         KeBugCheckWithTf(TRAP_CAUSE_UNKNOWN, 2, Cr0, 0, 0, TrapFrame);
     }
-    
+
     /* It's not a delayed load, so process this trap as an NPX fault */
     KiNpxHandler(TrapFrame, Thread, SaveArea);
 }
@@ -913,44 +913,44 @@
     PUCHAR Instructions;
     UCHAR Instruction = 0;
     KIRQL OldIrql;
-    
+
     /* Check for V86 GPF */
     if (__builtin_expect(KiV86Trap(TrapFrame), 1))
     {
         /* Enter V86 trap */
         KiEnterV86Trap(TrapFrame);
-        
+
         /* Must be a VDM process */
         if (__builtin_expect(!PsGetCurrentProcess()->VdmObjects, 0))
         {
             /* Enable interrupts */
             _enable();
-            
+
             /* Setup illegal instruction fault */
             KiDispatchException0Args(STATUS_ILLEGAL_INSTRUCTION,
                                      TrapFrame->Eip,
                                      TrapFrame);
         }
-        
+
         /* Go to APC level */
         OldIrql = KfRaiseIrql(APC_LEVEL);
         _enable();
-        
+
         /* Handle the V86 opcode */
         if (__builtin_expect(Ki386HandleOpcodeV86(TrapFrame) == 0xFF, 0))
         {
             /* Should only happen in VDM mode */
             UNIMPLEMENTED_FATAL();
         }
-        
+
         /* Bring IRQL back */
         KfLowerIrql(OldIrql);
         _disable();
-        
+
         /* Do a quick V86 exit if possible */
         KiExitV86Trap(TrapFrame);
     }
-    
+
     /* Save trap frame */
     KiEnterTrap(TrapFrame);
 
@@ -959,14 +959,14 @@
     {
         /* Should not be VDM */
         ASSERT(KiVdmTrap(TrapFrame) == FALSE);
-        
+
         /* Enable interrupts and check error code */
         _enable();
         if (!TrapFrame->ErrCode)
         {
             /* FIXME: Use SEH */
             Instructions = (PUCHAR)TrapFrame->Eip;
-            
+
             /* Scan next 15 bytes */
             for (i = 0; i < 15; i++)
             {
@@ -980,7 +980,7 @@
                         break;
                     }
                 }
-                
+
                 /* Is this NOT any prefix instruction? */
                 if (j == sizeof(KiTrapPrefixTable))
                 {
@@ -989,7 +989,7 @@
                     break;
                 }
             }
-            
+
             /* If all we found was prefixes, then this instruction is too long */
             if (i == 15)
             {
@@ -998,7 +998,7 @@
                                          TrapFrame->Eip,
                                          TrapFrame);
             }
-            
+
             /* Check for privileged instructions */
             DPRINT("Instruction (%lu) at fault: %lx %lx %lx %lx\n",
                     i,
@@ -1065,7 +1065,7 @@
                     }
                 }
             }
-            
+
             /* So now... was the instruction privileged or not? */
             if (Privileged)
             {
@@ -1075,7 +1075,7 @@
                                          TrapFrame);
             }
         }
-            
+
         /* If we got here, send an access violation */
         KiDispatchException2Args(STATUS_ACCESS_VIOLATION,
                                  TrapFrame->Eip,
@@ -1123,7 +1123,7 @@
      * when the user is purposedly trying to create one from kernel-mode, so
      * we should probably table this for now since it's not a "real"
issue.
      */
-     
+
     /*
      * NOTE2: Another scenario is the IRET during a V8086 restore (BIOS Call)
      * which will cause a GPF since the trap frame is a total mess (on purpose)
@@ -1153,7 +1153,7 @@
             UNIMPLEMENTED_FATAL();
         }
     }
-     
+
      /* So since we're not dealing with the above case, check for RDMSR/WRMSR */
     if ((Instructions[0] == 0xF) &&            // 2-byte opcode
         ((Instructions[1] == 0x32) ||        // RDMSR
@@ -1181,7 +1181,7 @@
         /* Whatever it is, we can't handle it */
         KiSystemFatalException(EXCEPTION_GP_FAULT, TrapFrame);
     }
-    
+
     /* Return to where we came from */
     KiTrapReturn(TrapFrame);
 }
@@ -1287,7 +1287,7 @@
 #endif
     /* Check for VDM trap */
     ASSERT((KiVdmTrap(TrapFrame)) == FALSE);
-    
+
     /* Either kernel or user trap (non VDM) so dispatch exception */
     if (Status == STATUS_ACCESS_VIOLATION)
     {
@@ -1308,7 +1308,7 @@
                                  Cr2,
                                  TrapFrame);
     }
-    
+
     /* Only other choice is an in-page error, with 3 parameters */
     KiDispatchExceptionFromTrapFrame(STATUS_IN_PAGE_ERROR,
                                      TrapFrame->Eip,
@@ -1339,7 +1339,7 @@
 {
     PKTHREAD Thread;
     PFX_SAVE_AREA SaveArea;
-    
+
     /* Save trap frame */
     KiEnterTrap(TrapFrame);
 
@@ -1351,11 +1351,11 @@
         /* It isn't, enable interrupts and set delayed error */
         _enable();
         SaveArea->Cr0NpxState |= CR0_TS;
-        
+
         /* End trap */
         KiEoiHelper(TrapFrame);
     }
-    
+
     /* Otherwise, proceed with NPX fault handling */
     KiNpxHandler(TrapFrame, Thread, SaveArea);
 }
@@ -1381,7 +1381,7 @@
     PKTHREAD Thread;
     PFX_SAVE_AREA SaveArea;
     ULONG Cr0, MxCsrMask, Error;
-    
+
     /* Save trap frame */
     KiEnterTrap(TrapFrame);
 
@@ -1405,31 +1405,31 @@
         /* Kernel should not fault on XMMI */
         KeBugCheckWithTf(TRAP_CAUSE_UNKNOWN, 13, 0, 0, 2, TrapFrame);
     }
-    
+
     /* Update CR0 */
     Cr0 = __readcr0();
     Cr0 &= ~(CR0_MP | CR0_EM | CR0_TS);
     __writecr0(Cr0);
-    
+
     /* Save FPU state */
     Ke386SaveFpuState(SaveArea);
-    
+
     /* Mark CR0 state dirty */
     Cr0 |= NPX_STATE_NOT_LOADED;
     Cr0 |= SaveArea->Cr0NpxState;
      __writecr0(Cr0);
-    
+
     /* Update NPX state */
     Thread->NpxState = NPX_STATE_NOT_LOADED;
     KeGetCurrentPrcb()->NpxThread = NULL;
-    
+
     /* Clear the TS bit and re-enable interrupts */
     SaveArea->Cr0NpxState &= ~CR0_TS;
     _enable();
 
     /* Now look at MxCsr to get the mask of errors we should care about */
     MxCsrMask = ~((USHORT)SaveArea->U.FxArea.MXCsr >> 7);
-    
+
     /* Get legal exceptions that software should handle */
     Error = (USHORT)SaveArea->U.FxArea.MXCsr & (FSW_INVALID_OPERATION |
                                                 FSW_DENORMAL |
@@ -1453,7 +1453,7 @@
                                  0,
                                  TrapFrame);
     }
-    
+
     /* Unknown XMMI fault */
     KeBugCheckWithTf(TRAP_CAUSE_UNKNOWN, 13, 0, 0, 1, TrapFrame);
 }
@@ -1507,10 +1507,10 @@
 {
     /* Save trap frame */
     KiEnterTrap(TrapFrame);
-    
+
     /* Increment EIP to skip the INT3 instruction */
     TrapFrame->Eip++;
-    
+
     /* Continue with the common handler */
     KiDebugHandler(TrapFrame, TrapFrame->Eax, TrapFrame->Ecx, TrapFrame->Edx);
 }
@@ -1548,7 +1548,7 @@
     ULONG Id, Offset, StackBytes, Result;
     PVOID Handler;
     ULONG SystemCallNumber = TrapFrame->Eax;
-    
+
     /* Get the current thread */
     Thread = KeGetCurrentThread();
 
@@ -1629,43 +1629,43 @@
             goto ExitCall;
         }
     }
-    
+
     /* Check if this is a GUI call */
     if (__builtin_expect(Offset & SERVICE_TABLE_TEST, 0))
     {
         /* Get the batch count and flush if necessary */
         if (NtCurrentTeb()->GdiBatchCount) KeGdiFlushUserBatch();
     }
-    
+
     /* Increase system call count */
     KeGetCurrentPrcb()->KeSystemCalls++;
-    
+
     /* FIXME: Increase individual counts on debug systems */
     //KiIncreaseSystemCallCount(DescriptorTable, Id);
-    
+
     /* Get stack bytes */
     StackBytes = DescriptorTable->Number[Id];
-    
+
     /* Probe caller stack */
     if (__builtin_expect((Arguments < (PVOID)MmUserProbeAddress) &&
!(KiUserTrap(TrapFrame)), 0))
     {
         /* Access violation */
         UNIMPLEMENTED_FATAL();
     }
-    
+
     /* Call pre-service debug hook */
     KiDbgPreServiceHook(SystemCallNumber, Arguments);
 
     /* Get the handler and make the system call */
     Handler = (PVOID)DescriptorTable->Base[Id];
     Result = KiSystemCallTrampoline(Handler, Arguments, StackBytes);
-    
+
     /* Call post-service debug hook */
     Result = KiDbgPostServiceHook(SystemCallNumber, Result);
 
     /* Make sure we're exiting correctly */
     KiExitSystemCallDebugChecks(Id, TrapFrame);
-    
+
     /* Restore the old trap frame */
 ExitCall:
     Thread->TrapFrame = (PKTRAP_FRAME)TrapFrame->Edx;