[sir_richard] 48844: [HAL]: Partly implement HalpAdjustPCIResourceList required for legacy HAL. No actual adjustment is done yet, since the Range package is not implemented. [HAL]: Implement most o...

Author: sir_richard
Date: Tue Sep 21 17:07:40 2010
New Revision: 48844

URL: http://svn.reactos.org/svn/reactos?rev=48844&view=rev
Log:
[HAL]: Partly implement HalpAdjustPCIResourceList required for legacy HAL. No actual
adjustment is done yet, since the Range package is not implemented.
[HAL]: Implement most of HalpGetISAFixedPCIIrq, other than the legacy PCI IRQ Routing
Miniport callbacks, which aren't yet implemented by ReactOS.
The Windows PCI Bus Driver seems to work now.

Modified:
    trunk/reactos/hal/halx86/generic/legacy/bus/pcibus.c

Modified: trunk/reactos/hal/halx86/generic/legacy/bus/pcibus.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/hal/halx86/generic/legacy/…
==============================================================================
--- trunk/reactos/hal/halx86/generic/legacy/bus/pcibus.c [iso-8859-1] (original)
+++ trunk/reactos/hal/halx86/generic/legacy/bus/pcibus.c [iso-8859-1] Tue Sep 21 17:07:40
2010
@@ -14,6 +14,7 @@
 
 /* GLOBALS *******************************************************************/
 
+extern BOOLEAN HalpPciLockSettings;
 ULONG HalpBusType;
 
 PCI_TYPE1_CFG_CYCLE_BITS HalpPciDebuggingDevice[2] = {{{{0}}}};
@@ -558,8 +559,42 @@
                       IN PCI_SLOT_NUMBER PciSlot,
                       OUT PSUPPORTED_RANGE *Range)
 {
-    UNIMPLEMENTED;
-    while (TRUE);
+    PCI_COMMON_HEADER PciData;
+    
+    /* Read PCI configuration data */
+    HalGetBusData(PCIConfiguration,
+                  BusHandler->BusNumber,
+                  PciSlot.u.AsULONG,
+                  &PciData,
+                  PCI_COMMON_HDR_LENGTH);
+                
+    /* Make sure it's a real device */
+    if (PciData.VendorID == PCI_INVALID_VENDORID) return STATUS_UNSUCCESSFUL;
+    
+    /* Allocate the supported range structure */
+    *Range = ExAllocatePoolWithTag(PagedPool, sizeof(SUPPORTED_RANGE), 'Hal ');
+    if (!*Range) return STATUS_INSUFFICIENT_RESOURCES;
+    
+    /* Set it up */
+    RtlZeroMemory(*Range, sizeof(SUPPORTED_RANGE));
+    (*Range)->Base = 1;
+    
+    /* If the PCI device has no IRQ, nothing to do */
+    if (!PciData.u.type0.InterruptPin) return STATUS_SUCCESS;
+    
+    /* FIXME: The PCI IRQ Routing Miniport should be called */
+    
+    /* Also if the INT# seems bogus, nothing to do either */
+    if ((PciData.u.type0.InterruptLine == 0) ||
+        (PciData.u.type0.InterruptLine == 255))
+    {
+        /* Fake success */
+        return STATUS_SUCCESS;
+    }
+    
+    /* Otherwise, the INT# should be valid, return it to the caller */
+    (*Range)->Base = PciData.u.type0.InterruptLine;
+    (*Range)->Limit = PciData.u.type0.InterruptLine;
     return STATUS_SUCCESS;
 }
 
@@ -622,10 +657,40 @@
                           IN PBUS_HANDLER RootHandler,
                           IN OUT PIO_RESOURCE_REQUIREMENTS_LIST *pResourceList)
 {
-    /* Not yet supported */
-    DbgPrint("HAL: PCI Resource List Adjustment not implemented!");
-    while (TRUE);
-    return STATUS_UNSUCCESSFUL;
+    PPCIPBUSDATA BusData;
+    PCI_SLOT_NUMBER SlotNumber;
+    PSUPPORTED_RANGE Interrupt;
+    NTSTATUS Status;
+    
+    /* Get PCI bus data */
+    BusData = BusHandler->BusData;
+    SlotNumber.u.AsULONG = (*pResourceList)->SlotNumber;
+    
+    /* Get the IRQ supported range */
+    Status = BusData->GetIrqRange(BusHandler, RootHandler, SlotNumber,
&Interrupt);
+    if (!NT_SUCCESS(Status)) return Status;
+#ifndef _MINIHAL_
+    /* Handle the /PCILOCK feature */
+    if (HalpPciLockSettings)
+    {
+        /* /PCILOCK is not yet supported */
+        UNIMPLEMENTED;
+        while (TRUE);
+    }
+#endif
+    /* Now create the correct resource list based on the supported bus ranges */
+#if 0
+    Status = HaliAdjustResourceListRange(BusHandler->BusAddresses,
+                                         Interrupt,
+                                         pResourceList);
+#else
+    DPRINT1("HAL: No PCI Resource Adjustment done! Hardware may
malfunction\n");
+    Status = STATUS_SUCCESS;
+#endif
+
+    /* Return to caller */
+    ExFreePool(Interrupt);
+    return Status;
 }
 
 NTSTATUS