[navaraf] 12906: - Output correct length and page to the controller on DMA transfers.

- Output correct length and page to the controller on DMA transfers.
- Fix the value of AdapterObject->PagePort.
- Don't modify variables we're not supposed to modify in IoMapTransfer.
Modified: trunk/reactos/hal/halx86/generic/adapter.c
Modified: trunk/reactos/hal/halx86/generic/dma.c
Modified: trunk/reactos/hal/halx86/include/hal.h
  _____  

Modified: trunk/reactos/hal/halx86/generic/adapter.c
--- trunk/reactos/hal/halx86/generic/adapter.c	2005-01-09 11:38:07 UTC
(rev 12905)
+++ trunk/reactos/hal/halx86/generic/adapter.c	2005-01-09 14:11:25 UTC
(rev 12906)
@@ -479,18 +479,13 @@

 {
   PHYSICAL_ADDRESS Address;
   KIRQL OldIrql;
-  UCHAR Mode;
+  ULONG LengthShift = 0;
 
-#if defined(__GNUC__)
-  Address.QuadPart = 0ULL;
-#else
   Address.QuadPart = 0;
-#endif
 
   /* Isa System (slave) DMA? */
   if (MapRegisterBase && !AdapterObject->MasterDevice)
   {
-
     KeAcquireSpinLock(&AdapterObject->SpinLock, &OldIrql);
 
     /*
@@ -510,11 +505,8 @@
      * -- Filip Navara, 19/07/2004     
      */
 
-     /* Get the mode for easier coding */
-     Mode = AdapterObject->AdapterMode;
-     
     /* if it is a write to the device, copy the caller buffer to the
low buffer */
-    if ((WriteToDevice) && !((PDMA_MODE)&Mode)->AutoInitialize)
+    if (WriteToDevice && !AdapterObject->AdapterMode.AutoInitialize)
     {
       memcpy(MapRegisterBase,
              (char*)MmGetSystemAddressForMdl(Mdl) + ((ULONG)CurrentVa -
(ULONG)MmGetMdlVirtualAddress(Mdl)),
@@ -522,59 +514,73 @@
     }
 
     /* Writer Adapter Mode, transfer type */
-    ((PDMA_MODE)&Mode)->TransferType = (WriteToDevice ? WRITE_TRANSFER
: READ_TRANSFER);
+    AdapterObject->AdapterMode.TransferType = (WriteToDevice ?
WRITE_TRANSFER : READ_TRANSFER);
 
-    // program up the dma controller, and return
-    if (!((PDMA_MODE)&Mode)->AutoInitialize) {
+    /* program up the dma controller, and return */
+    if (!AdapterObject->AdapterMode.AutoInitialize) {
       Address = MmGetPhysicalAddress( MapRegisterBase );
     } else {
       Address = MmGetPhysicalAddress( CurrentVa );
     }
     
     /* 16-bit DMA has a shifted length */
-    if (AdapterObject->Width16Bits) *Length = (*Length >> 1);
+    if (AdapterObject->Width16Bits) {
+      LengthShift = 1;
+    }
      
     /* Make the Transfer */
     if (AdapterObject->AdapterNumber == 1) {
     
     	PDMA1_CONTROL DmaControl1 = AdapterObject->AdapterBaseVa; /* For
Writing Less Code */
     	
+	/* Mask the Channel */
+	WRITE_PORT_UCHAR(&DmaControl1->SingleMask,
AdapterObject->ChannelNumber | DMA_SETMASK);
+
 	/* Reset Register */
 	WRITE_PORT_UCHAR(&DmaControl1->ClearBytePointer, 0);
 	
 	/* Set the Mode */
-	WRITE_PORT_UCHAR(&DmaControl1->Mode, (UCHAR)(Mode));
+	WRITE_PORT_UCHAR(&DmaControl1->Mode,
AdapterObject->AdapterModeByte);
 	
-	/* Set the Page Register (apparently always 0 for us if I trust
the previous comment) */
+	/* Set the Page Register */
+	WRITE_PORT_UCHAR(AdapterObject->PagePort,
(UCHAR)(Address.u.LowPart >> 16));
+
+	/* Set the Offset Register (apparently always 0 for us if I
trust the previous comment) */
 
WRITE_PORT_UCHAR(&DmaControl1->DmaAddressCount[AdapterObject->ChannelNum
ber].DmaBaseAddress, 0);
 
WRITE_PORT_UCHAR(&DmaControl1->DmaAddressCount[AdapterObject->ChannelNum
ber].DmaBaseAddress, 0);
 	
 	/* Set the Length */
 
WRITE_PORT_UCHAR(&DmaControl1->DmaAddressCount[AdapterObject->ChannelNum
ber].DmaBaseCount,
-			(UCHAR)((*Length) - 1));
+			(UCHAR)((*Length >> LengthShift) - 1));
 
WRITE_PORT_UCHAR(&DmaControl1->DmaAddressCount[AdapterObject->ChannelNum
ber].DmaBaseCount,
-			(UCHAR)((*Length) - 1) >> 8);
+			(UCHAR)(((*Length >> LengthShift) - 1) >> 8));
 			
 	/* Unmask the Channel */
 	WRITE_PORT_UCHAR(&DmaControl1->SingleMask,
AdapterObject->ChannelNumber | DMA_CLEARMASK);
     } else {
         PDMA2_CONTROL DmaControl2 = AdapterObject->AdapterBaseVa; /*
For Writing Less Code */
     	
+	/* Mask the Channel */
+	WRITE_PORT_UCHAR(&DmaControl2->SingleMask,
AdapterObject->ChannelNumber | DMA_SETMASK);
+
 	/* Reset Register */
 	WRITE_PORT_UCHAR(&DmaControl2->ClearBytePointer, 0);
 	
 	/* Set the Mode */
-	WRITE_PORT_UCHAR(&DmaControl2->Mode, (UCHAR)(Mode));
+	WRITE_PORT_UCHAR(&DmaControl2->Mode,
AdapterObject->AdapterModeByte);
 	
-	/* Set the Page Register (apparently always 0 for us if I trust
the previous comment) */
+	/* Set the Page Register */
+	WRITE_PORT_UCHAR(AdapterObject->PagePort,
(UCHAR)(Address.u.LowPart >> 16));
+
+	/* Set the Offset Register (apparently always 0 for us if I
trust the previous comment) */
 
WRITE_PORT_UCHAR(&DmaControl2->DmaAddressCount[AdapterObject->ChannelNum
ber].DmaBaseAddress, 0);
 
WRITE_PORT_UCHAR(&DmaControl2->DmaAddressCount[AdapterObject->ChannelNum
ber].DmaBaseAddress, 0);
 	
 	/* Set the Length */
 
WRITE_PORT_UCHAR(&DmaControl2->DmaAddressCount[AdapterObject->ChannelNum
ber].DmaBaseCount,
-			(UCHAR)((*Length) - 1));
+			(UCHAR)((*Length >> LengthShift) - 1));
 
WRITE_PORT_UCHAR(&DmaControl2->DmaAddressCount[AdapterObject->ChannelNum
ber].DmaBaseCount,
-			(UCHAR)((*Length) - 1) >> 8);
+			(UCHAR)(((*Length >> LengthShift) - 1) >> 8));
 			
 	/* Unmask the Channel */
 	WRITE_PORT_UCHAR(&DmaControl2->SingleMask,
AdapterObject->ChannelNumber | DMA_CLEARMASK);
  _____  

Modified: trunk/reactos/hal/halx86/generic/dma.c
--- trunk/reactos/hal/halx86/generic/dma.c	2005-01-09 11:38:07 UTC
(rev 12905)
+++ trunk/reactos/hal/halx86/generic/dma.c	2005-01-09 14:11:25 UTC
(rev 12906)
@@ -122,6 +122,7 @@

 	DWORD Controller;
 	ULONG MaximumLength;
 	BOOLEAN ChannelSetup;
+	DMA_MODE DmaMode;	
 
 	DPRINT("Entered Function\n");
   
@@ -254,16 +255,20 @@
 		switch (ChannelSelect) {
 		
 		case 0:
-			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel0));
+			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel0) +
+
FIELD_OFFSET(EISA_CONTROL, DmaController1Pages));
 			break;
 		case 1:
-			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel1));
+			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel1) +
+
FIELD_OFFSET(EISA_CONTROL, DmaController1Pages));
 			break;
 		case 2:
-			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel2));
+			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel2) +
+
FIELD_OFFSET(EISA_CONTROL, DmaController1Pages));
 			break;
 		case 3:
-			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel3));
+			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel3) +
+
FIELD_OFFSET(EISA_CONTROL, DmaController1Pages));
 			break;
 		}
 	
@@ -273,13 +278,16 @@
 		switch (ChannelSelect) {
 		
 		case 1:
-			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel5));
+			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel5) +
+
FIELD_OFFSET(EISA_CONTROL, DmaController1Pages));
 			break;
 		case 2:
-			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel6));
+			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel6) +
+
FIELD_OFFSET(EISA_CONTROL, DmaController1Pages));
 			break;
 		case 3:
-			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel7));
+			AdapterObject->PagePort =
(PUCHAR)(FIELD_OFFSET(DMA_PAGE, Channel7) +
+
FIELD_OFFSET(EISA_CONTROL, DmaController1Pages));
 			break;
 		}
 		
@@ -341,7 +349,8 @@
 				    	*((PUCHAR)&ExtendedMode));
 		}
 	}
-			/* Do 8/16-bit validation */
+
+	/* Do 8/16-bit validation */
 	DPRINT("Validating an Adapter Object\n");
 	if (!DeviceDescription->Master) {
 		if ((DeviceDescription->DmaWidth == Width8Bits) &&
(Controller != 1)) {
@@ -354,18 +363,19 @@
 			}
 		}
 	}
-		UCHAR DmaMode;	
-			DPRINT("Final DMA Request Mode Setting of the
Adapter Object\n");
+
+	DPRINT("Final DMA Request Mode Setting of the Adapter
Object\n");
+
 	/* Set the DMA Request Modes */
 	if (DeviceDescription->Master) {
 		/* This is a cascade request */
-		((PDMA_MODE)&DmaMode)->RequestMode =
CASCADE_REQUEST_MODE;
+		DmaMode.RequestMode = CASCADE_REQUEST_MODE;
 		
 		/* Send the request */
 		if (AdapterObject->AdapterNumber == 1) {
 			/* Set the Request Data */
 
WRITE_PORT_UCHAR(&((PDMA1_CONTROL)AdapterObject->AdapterBaseVa)->Mode,
-				  	AdapterObject->AdapterMode);
+				  	AdapterObject->AdapterModeByte);
 					  
 			/* Unmask DMA Channel */
 
WRITE_PORT_UCHAR(&((PDMA1_CONTROL)AdapterObject->AdapterBaseVa)->SingleM
ask,
@@ -373,7 +383,7 @@
 		} else {
 			/* Set the Request Data */
 
WRITE_PORT_UCHAR(&((PDMA2_CONTROL)AdapterObject->AdapterBaseVa)->Mode,
-				  	AdapterObject->AdapterMode);
+				  	AdapterObject->AdapterModeByte);
 				  
 			/* Unmask DMA Channel */
 
WRITE_PORT_UCHAR(&((PDMA2_CONTROL)AdapterObject->AdapterBaseVa)->SingleM
ask,
@@ -381,14 +391,14 @@
 		}
 	} else if (DeviceDescription->DemandMode) {
 		/* This is a Demand request */
-		((PDMA_MODE)&DmaMode)->RequestMode =
DEMAND_REQUEST_MODE;
+		DmaMode.RequestMode = DEMAND_REQUEST_MODE;
 	} else {
 		/* Normal Request */
-		((PDMA_MODE)&DmaMode)->RequestMode =
SINGLE_REQUEST_MODE;
+		DmaMode.RequestMode = SINGLE_REQUEST_MODE;
 	}
 	
 	/* Auto Initialize Enabled or Not*/
-	((PDMA_MODE)&DmaMode)->AutoInitialize =
DeviceDescription->AutoInitialize;
+	DmaMode.AutoInitialize = DeviceDescription->AutoInitialize;
 	AdapterObject->AdapterMode = DmaMode;
 	return AdapterObject;
 }
  _____  

Modified: trunk/reactos/hal/halx86/include/hal.h
--- trunk/reactos/hal/halx86/include/hal.h	2005-01-09 11:38:07 UTC
(rev 12905)
+++ trunk/reactos/hal/halx86/include/hal.h	2005-01-09 14:11:25 UTC
(rev 12906)
@@ -354,8 +354,11 @@

   UCHAR ChannelNumber;
   UCHAR AdapterNumber;
   USHORT DmaPortAddress;
-  UCHAR AdapterMode;
-  BOOLEAN  NeedsMapRegisters;
+  union {
+    DMA_MODE AdapterMode;
+    UCHAR AdapterModeByte;
+  };
+  BOOLEAN NeedsMapRegisters;
   BOOLEAN MasterDevice;
   UCHAR Width16Bits;
   UCHAR ScatterGather;