[dgorbachev] 54130: [UNIATA] Nathan Lineback <~lineback~AT~toastytech~DOT~com~>: - Apply the Linux fix to UniATA. Bug #6500.

Author: dgorbachev
Date: Fri Oct 14 05:33:49 2011
New Revision: 54130

URL: http://svn.reactos.org/svn/reactos?rev=54130&view=rev
Log:
[UNIATA]
Nathan Lineback <~lineback~AT~toastytech~DOT~com~>:
- Apply the Linux fix to UniATA. Bug #6500.

Modified:
    trunk/reactos/drivers/storage/ide/uniata/id_init.cpp

Modified: trunk/reactos/drivers/storage/ide/uniata/id_init.cpp
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata…
==============================================================================
--- trunk/reactos/drivers/storage/ide/uniata/id_init.cpp [iso-8859-1] (original)
+++ trunk/reactos/drivers/storage/ide/uniata/id_init.cpp [iso-8859-1] Fri Oct 14 05:33:49
2011
@@ -854,6 +854,32 @@
 
             ULONG IoSize = 0;
             ULONG BaseMemAddress = 0;
+
+            /*
+             * vt6420/1 has problems talking to some drives.  The following
+             * is based on the fix from Joseph Chan &lt;JosephChan(a)via.com.tw&gt;tw>.
+             *
+             * When host issues HOLD, device may send up to 20DW of data
+             * before acknowledging it with HOLDA and the host should be
+             * able to buffer them in FIFO.  Unfortunately, some WD drives
+             * send upto 40DW before acknowledging HOLD and, in the
+             * default configuration, this ends up overflowing vt6421's
+             * FIFO, making the controller abort the transaction with
+             * R_ERR.
+             *
+             * Rx52[2] is the internal 128DW FIFO Flow control watermark
+             * adjusting mechanism enable bit and the default value 0
+             * means host will issue HOLD to device when the left FIFO
+             * size goes below 32DW.  Setting it to 1 makes the watermark
+             * 64DW.
+             *
+             * http://www.reactos.org/bugzilla/show_bug.cgi?id=6500
+             */
+
+            if(DeviceID == 0x3149 || DeviceID == 0x3249) {    //vt6420 or vt6421
+                KdPrint2((PRINT_PREFIX "VIA 642x FIFO\n"));
+                ChangePciConfig1(0x52, a | (1 << 2));
+            }
 
             switch(DeviceID) {
             case 0x3149: // VIA 6420