[sedwards] 15108: remove whitespace from end of lines

remove whitespace from end of lines
Modified: trunk/reactos/drivers/bus/acpi/ospm/acpisys.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/bn.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bm.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmnotify.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmpm.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmpower.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmrequest.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmsearch.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmutils.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmxface.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/fdo.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/include/bm.h
Modified: trunk/reactos/drivers/bus/acpi/ospm/include/bn.h
Modified: trunk/reactos/drivers/bus/acpi/ospm/osl.c
Modified: trunk/reactos/drivers/bus/acpi/ospm/pdo.c
Modified: trunk/reactos/drivers/bus/isapnp/isapnp.c
Modified: trunk/reactos/drivers/bus/pci/fdo.c
Modified: trunk/reactos/drivers/bus/pci/pci.c
Modified: trunk/reactos/drivers/bus/pci/pcidef.h
Modified: trunk/reactos/drivers/bus/pci/pdo.c
Modified: trunk/reactos/drivers/bus/serenum/detect.c
Modified: trunk/reactos/drivers/bus/serenum/fdo.c
Modified: trunk/reactos/drivers/bus/serenum/misc.c
Modified: trunk/reactos/drivers/bus/serenum/pdo.c
Modified: trunk/reactos/drivers/bus/serenum/serenum.c
Modified: trunk/reactos/drivers/bus/serenum/serenum.h
Modified: trunk/reactos/drivers/dd/blue/blue.c
Modified: trunk/reactos/drivers/dd/bootvid/bootvid.c
Modified: trunk/reactos/drivers/dd/bootvid/bootvid.h
Modified: trunk/reactos/drivers/dd/debugout/debugout.c
Modified: trunk/reactos/drivers/dd/green/createclose.c
Modified: trunk/reactos/drivers/dd/green/dispatch.c
Modified: trunk/reactos/drivers/dd/green/green.c
Modified: trunk/reactos/drivers/dd/green/green.h
Modified: trunk/reactos/drivers/dd/green/keyboard.c
Modified: trunk/reactos/drivers/dd/green/misc.c
Modified: trunk/reactos/drivers/dd/green/pnp.c
Modified: trunk/reactos/drivers/dd/green/screen.c
Modified: trunk/reactos/drivers/dd/mpu401/mpu401.c
Modified: trunk/reactos/drivers/dd/mpu401/portio.c
Modified: trunk/reactos/drivers/dd/null/null.c
Modified: trunk/reactos/drivers/dd/parallel/parallel.c
Modified: trunk/reactos/drivers/dd/parallel/parallel.h
Modified: trunk/reactos/drivers/dd/ramdrv/ramdrv.c
Modified: trunk/reactos/drivers/dd/serial/circularbuffer.c
Modified: trunk/reactos/drivers/dd/serial/cleanup.c
Modified: trunk/reactos/drivers/dd/serial/close.c
Modified: trunk/reactos/drivers/dd/serial/create.c
Modified: trunk/reactos/drivers/dd/serial/devctrl.c
Modified: trunk/reactos/drivers/dd/serial/info.c
Modified: trunk/reactos/drivers/dd/serial/legacy.c
Modified: trunk/reactos/drivers/dd/serial/misc.c
Modified: trunk/reactos/drivers/dd/serial/pnp.c
Modified: trunk/reactos/drivers/dd/serial/power.c
Modified: trunk/reactos/drivers/dd/serial/rw.c
Modified: trunk/reactos/drivers/dd/serial/serial.c
Modified: trunk/reactos/drivers/dd/serial/serial.h
Modified: trunk/reactos/drivers/dd/sndblst/portio.c
Modified: trunk/reactos/drivers/dd/sndblst/sndblst.c
Modified: trunk/reactos/drivers/dd/sound/dsp.c
Modified: trunk/reactos/drivers/dd/sound/mixer.c
Modified: trunk/reactos/drivers/dd/sound/sb16.c
Modified: trunk/reactos/drivers/dd/sound/sb16.h
Modified: trunk/reactos/drivers/dd/sound/sound.c
Modified: trunk/reactos/drivers/dd/sound/wave.c
Modified: trunk/reactos/drivers/dd/sound/wave.h
Modified: trunk/reactos/drivers/dd/test/test.c
Modified: trunk/reactos/drivers/fs/cdfs/cdfs.c
Modified: trunk/reactos/drivers/fs/cdfs/cleanup.c
Modified: trunk/reactos/drivers/fs/cdfs/close.c
Modified: trunk/reactos/drivers/fs/cdfs/common.c
Modified: trunk/reactos/drivers/fs/cdfs/create.c
Modified: trunk/reactos/drivers/fs/cdfs/dirctl.c
Modified: trunk/reactos/drivers/fs/cdfs/fcb.c
Modified: trunk/reactos/drivers/fs/cdfs/finfo.c
Modified: trunk/reactos/drivers/fs/cdfs/fsctl.c
Modified: trunk/reactos/drivers/fs/cdfs/misc.c
Modified: trunk/reactos/drivers/fs/cdfs/rw.c
Modified: trunk/reactos/drivers/fs/ext2/attr.c
Modified: trunk/reactos/drivers/fs/ext2/blockdev.c
Modified: trunk/reactos/drivers/fs/ext2/dir.c
Modified: trunk/reactos/drivers/fs/ext2/ext2fs.h
Modified: trunk/reactos/drivers/fs/ext2/file.c
Modified: trunk/reactos/drivers/fs/ext2/inode.c
Modified: trunk/reactos/drivers/fs/ext2/quota.c
Modified: trunk/reactos/drivers/fs/ext2/rw.c
Modified: trunk/reactos/drivers/fs/ext2/security.c
Modified: trunk/reactos/drivers/fs/ext2/super.c
Modified: trunk/reactos/drivers/fs/fs_rec/fat.c
Modified: trunk/reactos/drivers/fs/minix/bitops.c
Modified: trunk/reactos/drivers/fs/minix/block.c
Modified: trunk/reactos/drivers/fs/minix/blockdev.c
Modified: trunk/reactos/drivers/fs/minix/cache.c
Modified: trunk/reactos/drivers/fs/minix/dir.c
Modified: trunk/reactos/drivers/fs/minix/inode.c
Modified: trunk/reactos/drivers/fs/minix/minix.h
Modified: trunk/reactos/drivers/fs/minix/mount.c
Modified: trunk/reactos/drivers/fs/minix/rw.c
Modified: trunk/reactos/drivers/fs/ms/create.c
Modified: trunk/reactos/drivers/fs/ms/finfo.c
[truncated at 100 lines; 288 more skipped] 
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/acpisys.c
--- trunk/reactos/drivers/bus/acpi/ospm/acpisys.c	2005-05-08
02:15:21 UTC (rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/acpisys.c	2005-05-08
02:16:32 UTC (rev 15108)
@@ -16,7 +16,7 @@

 
 #ifdef  ALLOC_PRAGMA
 
-// Make the initialization routines discardable, so that they 
+// Make the initialization routines discardable, so that they
 // don't waste space
 
 #pragma  alloc_text(init, DriverEntry)
@@ -27,8 +27,8 @@
 NTSTATUS
 STDCALL
 ACPIDispatchDeviceControl(
-  IN PDEVICE_OBJECT DeviceObject, 
-  IN PIRP Irp) 
+  IN PDEVICE_OBJECT DeviceObject,
+  IN PIRP Irp)
 {
   PIO_STACK_LOCATION IrpSp;
   NTSTATUS Status;
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/bn.c
--- trunk/reactos/drivers/bus/acpi/ospm/bn.c	2005-05-08 02:15:21 UTC
(rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/bn.c	2005-05-08 02:16:32 UTC
(rev 15108)
@@ -176,7 +176,7 @@

 	 * -------------
 	 * Either fixed-feature or generic (namespace) types.
 	 */
-	if (strncmp(device->id.hid, BN_HID_POWER_BUTTON, 
+	if (strncmp(device->id.hid, BN_HID_POWER_BUTTON,
 		sizeof(BM_DEVICE_HID)) == 0) {
 
 		if (device->id.type == BM_TYPE_FIXED_BUTTON) {
@@ -185,7 +185,7 @@
 
 			/* Register for fixed-feature events. */
 			status = acpi_install_fixed_event_handler(
-				ACPI_EVENT_POWER_BUTTON,
bn_notify_fixed, 
+				ACPI_EVENT_POWER_BUTTON,
bn_notify_fixed,
 				(void*)button);
 		}
 		else {
@@ -201,7 +201,7 @@
 	 * -------------
 	 * Either fixed-feature or generic (namespace) types.
 	 */
-	else if (strncmp( device->id.hid, BN_HID_SLEEP_BUTTON, 
+	else if (strncmp( device->id.hid, BN_HID_SLEEP_BUTTON,
 		sizeof(BM_DEVICE_HID)) == 0) {
 
 		if (device->id.type == BM_TYPE_FIXED_BUTTON) {
@@ -210,7 +210,7 @@
 
 			/* Register for fixed-feature events. */
 			status = acpi_install_fixed_event_handler(
-				ACPI_EVENT_SLEEP_BUTTON,
bn_notify_fixed, 
+				ACPI_EVENT_SLEEP_BUTTON,
bn_notify_fixed,
 				(void*)button);
 		}
 		else {
@@ -224,7 +224,7 @@
 	 * LID Switch?
 	 * -----------
 	 */
-	else if (strncmp( device->id.hid, BN_HID_LID_SWITCH, 
+	else if (strncmp( device->id.hid, BN_HID_LID_SWITCH,
 		sizeof(BM_DEVICE_HID)) == 0) {
 
 		button->type = BN_TYPE_LID_SWITCH;
@@ -360,7 +360,7 @@
 	 */
 	MEMCPY(criteria.hid, BN_HID_LID_SWITCH,
sizeof(BN_HID_LID_SWITCH));
 	status = bm_register_driver(&criteria, &driver);
-	
+
 	if (status == AE_NOT_FOUND)
 		status = AE_OK;
 
@@ -457,13 +457,13 @@
 
 	case BN_TYPE_POWER_BUTTON_FIXED:
 		DEBUG_PRINT(ACPI_INFO, ("Fixed-feature button status
change event detected.\n"));
-		/*bm_generate_event(button->device_handle, BN_PROC_ROOT,
+		/*bm_generate_event(button->device_handle, BN_PROC_ROOT,
 			BN_PROC_POWER_BUTTON, BN_NOTIFY_STATUS_CHANGE,
0);*/
 		break;
 
 	case BN_TYPE_SLEEP_BUTTON_FIXED:
 		DEBUG_PRINT(ACPI_INFO, ("Fixed-feature button status
change event detected.\n"));
-		/*bm_generate_event(button->device_handle, BN_PROC_ROOT,
+		/*bm_generate_event(button->device_handle, BN_PROC_ROOT,
 			BN_PROC_SLEEP_BUTTON, BN_NOTIFY_STATUS_CHANGE,
0);*/
 		break;
 
@@ -507,11 +507,11 @@
 	case BM_NOTIFY_DEVICE_ADDED:
 		status = bn_add_device(device_handle, context);
 		break;
-		
+
 	case BM_NOTIFY_DEVICE_REMOVED:
 		status = bn_remove_device(context);
 		break;
-		
+
 	case BN_NOTIFY_STATUS_CHANGE:
 		DEBUG_PRINT(ACPI_INFO, ("Button status change event
detected.\n"));
 
@@ -525,7 +525,7 @@
 
 		case BN_TYPE_POWER_BUTTON:
 		case BN_TYPE_POWER_BUTTON_FIXED:
-			/*bm_generate_event(device_handle, BN_PROC_ROOT,
+			/*bm_generate_event(device_handle, BN_PROC_ROOT,
 				BN_PROC_POWER_BUTTON, notify_type, 0);*/
 			break;
 
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bm.c
--- trunk/reactos/drivers/bus/acpi/ospm/busmgr/bm.c	2005-05-08
02:15:21 UTC (rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/busmgr/bm.c	2005-05-08
02:16:32 UTC (rev 15108)
@@ -214,7 +214,7 @@

 	 * Evaluate _STA:
 	 * --------------
 	 */
-	status = bm_evaluate_simple_integer(device->acpi_handle, "_STA",
+	status = bm_evaluate_simple_integer(device->acpi_handle, "_STA",
 		&(device->status));
 
 	return status;
@@ -263,12 +263,12 @@
 	}
 
 	if (info.valid & ACPI_VALID_UID) {
-		MEMCPY((void*)device->id.uid, (void*)info.unique_id, 
+		MEMCPY((void*)device->id.uid, (void*)info.unique_id,
 			sizeof(BM_DEVICE_UID));
 	}
 
 	if (info.valid & ACPI_VALID_HID) {
-		MEMCPY((void*)device->id.hid, (void*)info.hardware_id, 
+		MEMCPY((void*)device->id.hid, (void*)info.hardware_id,
 			sizeof(BM_DEVICE_HID));
 	}
 
@@ -311,7 +311,7 @@
 		/*
 		 * Presence of _DCK indicates a docking station.
 		 */
-		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, 
+		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
 			"_DCK", &acpi_handle))) {
 			device->flags |= BM_FLAGS_DOCKING_STATION;
 		}
@@ -320,7 +320,7 @@
 		 * Presence of _EJD and/or _EJx indicates 'ejectable'.
 		 * TODO: _EJx...
 		 */
-		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, 
+		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
 			"_EJD", &acpi_handle))) {
 			device->flags |= BM_FLAGS_EJECTABLE;
 		}
@@ -328,9 +328,9 @@
 		/*
 		 * Presence of _PR0 or _PS0 indicates 'power
manageable'.
 		 */
-		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, 
+		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
 			"_PR0", &acpi_handle)) ||
-
ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, 
+
ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
 			"_PS0", &acpi_handle))) {
 			device->flags |= BM_FLAGS_POWER_CONTROL;
 		}
@@ -338,7 +338,7 @@
 		/*
 		 * Presence of _CRS indicates 'configurable'.
 		 */
-		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, 
+		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
 			"_CRS", &acpi_handle))) {
 			device->flags |= BM_FLAGS_CONFIGURABLE;
 		}
@@ -351,9 +351,9 @@
 		/*
 		 * Presence of _HID or _ADR indicates 'identifiable'.
 		 */
-		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, 
+		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
 			"_HID", &acpi_handle)) ||
-		   ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, 
+		   ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
 		   "_ADR", &acpi_handle))) {
 			device->flags |= BM_FLAGS_IDENTIFIABLE;
 		}
@@ -361,7 +361,7 @@
 		/*
 		 * Presence of _STA indicates 'dynamic status'.
 		 */
-		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, 
+		if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
 			"_STA", &acpi_handle))) {
 			device->flags |= BM_FLAGS_DYNAMIC_STATUS;
 		}
@@ -428,7 +428,7 @@
 	/*
 	 * Device Type:
 	 * ------------
-	 */ 
+	 */
 	switch (acpi_type) {
 	case INTERNAL_TYPE_SCOPE:
 		device->id.type = BM_TYPE_SCOPE;
@@ -481,7 +481,7 @@
 		/*
 		 * Power Management:
 		 * -----------------
-		 * If this node doesn't provide direct power control  
+		 * If this node doesn't provide direct power control
 		 * then we inherit PM capabilities from its parent.
 		 *
 		 * TODO: Inherit!
@@ -572,8 +572,8 @@
 		if (ACPI_SUCCESS(status)) {
 
 			/*
-			 * TODO: This is a hack to get around the
problem 
-			 *       identifying scope objects.  Scopes 
+			 * TODO: This is a hack to get around the
problem
+			 *       identifying scope objects.  Scopes
 			 *       somehow need to be uniquely identified.
 			 */
 			status = acpi_get_type(child_handle,
&acpi_type);
@@ -621,7 +621,7 @@
 		else {
 			level--;
 			child_handle = parent_handle;
-			acpi_get_parent(parent_handle, 
+			acpi_get_parent(parent_handle,
 				&parent_handle);
 
 			if (parent) {
@@ -683,7 +683,7 @@
 	node->device.acpi_handle = ACPI_ROOT_OBJECT;
 	node->device.id.type = BM_TYPE_FIXED_BUTTON;
 	if (device_hid) {
-		MEMCPY((void*)node->device.id.hid, device_hid, 
+		MEMCPY((void*)node->device.id.hid, device_hid,
 			sizeof(node->device.id.hid));
 	}
 	node->device.flags = BM_FLAGS_FIXED_FEATURE;
@@ -950,14 +950,14 @@
 	 */
 	DEBUG_PRINT(ACPI_INFO, ("Registering for all device
notifications.\n"));
 
-	status = acpi_install_notify_handler(ACPI_ROOT_OBJECT, 
+	status = acpi_install_notify_handler(ACPI_ROOT_OBJECT,
 		ACPI_SYSTEM_NOTIFY, &bm_notify, NULL);
 	if (ACPI_FAILURE(status)) {
 		DEBUG_PRINT(ACPI_ERROR, ("Unable to register for
standard notifications.\n"));
 		return_ACPI_STATUS(status);
 	}
 
-	status = acpi_install_notify_handler(ACPI_ROOT_OBJECT, 
+	status = acpi_install_notify_handler(ACPI_ROOT_OBJECT,
 		ACPI_DEVICE_NOTIFY, &bm_notify, NULL);
 	if (ACPI_FAILURE(status)) {
 		DEBUG_PRINT(ACPI_ERROR, ("Unable to register for
device-specific notifications.\n"));
@@ -1019,13 +1019,13 @@
 
 	DEBUG_PRINT(ACPI_INFO, ("Unregistering for device
notifications.\n"));
 
-	status = acpi_remove_notify_handler(ACPI_ROOT_OBJECT, 
+	status = acpi_remove_notify_handler(ACPI_ROOT_OBJECT,
 		ACPI_SYSTEM_NOTIFY, &bm_notify);
 	if (ACPI_FAILURE(status)) {
 		DEBUG_PRINT(ACPI_ERROR, ("Unable to un-register for
standard notifications.\n"));
 	}
 
-	status = acpi_remove_notify_handler(ACPI_ROOT_OBJECT, 
+	status = acpi_remove_notify_handler(ACPI_ROOT_OBJECT,
 		ACPI_DEVICE_NOTIFY, &bm_notify);
 	if (ACPI_FAILURE(status)) {
 		DEBUG_PRINT(ACPI_ERROR, ("Unable to un-register for
device-specific notifications.\n"));
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmnotify.c
--- trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmnotify.c
2005-05-08 02:15:21 UTC (rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmnotify.c
2005-05-08 02:16:32 UTC (rev 15108)
@@ -63,13 +63,13 @@

 
 	DEBUG_PRINT(ACPI_INFO, ("Sending notify [0x%02x] to device
[0x%02x].\n", notify_type, node->device.handle));
 
-	if (!(node->device.flags & BM_FLAGS_DRIVER_CONTROL) || 
+	if (!(node->device.flags & BM_FLAGS_DRIVER_CONTROL) ||
 		!(node->driver.notify)) {
 		DEBUG_PRINT(ACPI_WARN, ("No driver installed for device
[0x%02x].\n", node->device.handle));
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
 
-	status = node->driver.notify(notify_type, node->device.handle, 
+	status = node->driver.notify(notify_type, node->device.handle,
 		&(node->driver.context));
 
 	return_ACPI_STATUS(status);
@@ -130,7 +130,7 @@
 	if (ACPI_FAILURE(status)) {
 		return_ACPI_STATUS(status);
 	}
-	
+
 	if (old_status == node->device.status) {
 		return_ACPI_STATUS(AE_OK);
 	}
@@ -138,12 +138,12 @@
 	if (status_change) {
 		*status_change = TRUE;
 	}
-	
+
 	/*
 	 * Device Insertion?
 	 * -----------------
 	 */
-	if ((device->status & BM_STATUS_PRESENT) && 
+	if ((device->status & BM_STATUS_PRESENT) &&
 		!(old_status & BM_STATUS_PRESENT)) {
 		/* TODO: Make sure driver is loaded, and if not, load.
*/
 		status = bm_generate_notify(node,
BM_NOTIFY_DEVICE_ADDED);
@@ -153,7 +153,7 @@
 	 * Device Removal?
 	 * ---------------
 	 */
-	else if (!(device->status & BM_STATUS_PRESENT) && 
+	else if (!(device->status & BM_STATUS_PRESENT) &&
 		(old_status & BM_STATUS_PRESENT)) {
 		/* TODO: Unload driver if last device instance. */
 		status = bm_generate_notify(node,
BM_NOTIFY_DEVICE_REMOVED);
@@ -247,7 +247,7 @@
 	/*
 	 * Device-Specific or Standard?
 	 * ----------------------------
-	 * Device-specific notifies are forwarded to the control
module's 
+	 * Device-specific notifies are forwarded to the control
module's
 	 * notify() function for processing.  Standard notifies are
handled
 	 * internally.
 	 */
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmpm.c
--- trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmpm.c	2005-05-08
02:15:21 UTC (rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmpm.c	2005-05-08
02:16:32 UTC (rev 15108)
@@ -72,21 +72,21 @@

 	/*
 	 * Calculate Power State:
 	 * ----------------------
-	 * Try to infer the devices's power state by checking the state
of 
-	 * the devices's power resources.  We start by evaluating _PR0 
-	 * (resource requirements at D0) and work through _PR1 and _PR2.
-	 * We know the current devices power state when all resources
(for 
-	 * a give Dx state) are ON.  If no power resources are on then
the 
+	 * Try to infer the devices's power state by checking the state
of
+	 * the devices's power resources.  We start by evaluating _PR0
+	 * (resource requirements at D0) and work through _PR1 and _PR2.
+	 * We know the current devices power state when all resources
(for
+	 * a give Dx state) are ON.  If no power resources are on then
the
 	 * device is assumed to be off (D3).
 	 */
 	for (i=ACPI_STATE_D0; i<ACPI_STATE_D3; i++) {
 
-		status = bm_evaluate_reference_list(device->acpi_handle,
+		status = bm_evaluate_reference_list(device->acpi_handle,
 			object_name, &pr_list);
 
 		if (ACPI_SUCCESS(status)) {
 
-			status = bm_pr_list_get_state(&pr_list, 
+			status = bm_pr_list_get_state(&pr_list,
 				&list_state);
 
 			if (ACPI_SUCCESS(status)) {
@@ -137,7 +137,7 @@
 	device->power.state = ACPI_STATE_UNKNOWN;
 
 	if (device->flags & BM_FLAGS_POWER_STATE) {
-		status = bm_evaluate_simple_integer(device->acpi_handle,
+		status = bm_evaluate_simple_integer(device->acpi_handle,
 			"_PSC", &(device->power.state));
 	}
 	else {
@@ -204,24 +204,24 @@
 	/*
 	 * Get Resources:
 	 * --------------
-	 * Get the power resources associated with the device's current 
+	 * Get the power resources associated with the device's current
 	 * and target power states.
 	 */
 	if (device->power.state != ACPI_STATE_UNKNOWN) {
 		object_name[3] = '0' + device->power.state;
-		bm_evaluate_reference_list(device->acpi_handle, 
+		bm_evaluate_reference_list(device->acpi_handle,
 			object_name, &current_list);
 	}
 
 	object_name[3] = '0' + state;
-	bm_evaluate_reference_list(device->acpi_handle, object_name, 
+	bm_evaluate_reference_list(device->acpi_handle, object_name,
 		&target_list);
 
 	/*
 	 * Transition Resources:
 	 * ---------------------
-	 * Transition all power resources referenced by this device to 
-	 * the correct power state (taking into consideration sequencing
+	 * Transition all power resources referenced by this device to
+	 * the correct power state (taking into consideration sequencing
 	 * and dependencies to other devices).
 	 */
 	if (current_list.count || target_list.count) {
@@ -234,7 +234,7 @@
 	/*
 	 * Execute _PSx:
 	 * -------------
-	 * Execute the _PSx method corresponding to the target Dx state,
+	 * Execute the _PSx method corresponding to the target Dx state,
 	 * if it exists.
 	 */
 	object_name[2] = 'S';
@@ -287,17 +287,17 @@
 	 * Power Management Flags:
 	 * -----------------------
 	 */
-	if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, "_PSC", 
+	if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, "_PSC",
 		&acpi_handle))) {
 		device->power.flags |= BM_FLAGS_POWER_STATE;
 	}
 
-	if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, "_IRC", 
+	if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, "_IRC",
 		&acpi_handle))) {
 		device->power.flags |= BM_FLAGS_INRUSH_CURRENT;
 	}
 
-	if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, "_PRW", 
+	if (ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, "_PRW",
 		&acpi_handle))) {
 		device->power.flags |= BM_FLAGS_WAKE_CAPABLE;
 	}
@@ -317,22 +317,22 @@
 	 * Figure out which Dx states are supported by this device for
the
 	 * S0 (working) state.  Note that D0 and D3 are required
(assumed).
 	 */
-	device->power.dx_supported[ACPI_STATE_S0] = BM_FLAGS_D0_SUPPORT
| 
+	device->power.dx_supported[ACPI_STATE_S0] = BM_FLAGS_D0_SUPPORT
|
 		BM_FLAGS_D3_SUPPORT;
 
-	if ((ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, "_PR1", 
-		&acpi_handle))) || 
-		(ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
"_PS1", 
+	if ((ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, "_PR1",
+		&acpi_handle))) ||
+		(ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
"_PS1",
 		&acpi_handle)))) {
-		device->power.dx_supported[ACPI_STATE_S0] |= 
+		device->power.dx_supported[ACPI_STATE_S0] |=
 			BM_FLAGS_D1_SUPPORT;
 	}
 
-	if ((ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, "_PR2", 
-		&acpi_handle))) || 
-		(ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
"_PS2", 
+	if ((ACPI_SUCCESS(acpi_get_handle(device->acpi_handle, "_PR2",
+		&acpi_handle))) ||
+		(ACPI_SUCCESS(acpi_get_handle(device->acpi_handle,
"_PS2",
 		&acpi_handle)))) {
-		device->power.dx_supported[ACPI_STATE_S0] |= 
+		device->power.dx_supported[ACPI_STATE_S0] |=
 			BM_FLAGS_D2_SUPPORT;
 	}
 
@@ -352,28 +352,28 @@
 		/*
 		 * Evalute _SxD:
 		 * -------------
-		 * Which returns the highest (power) Dx state supported
in 
-		 * this system (Sx) state.  We convert this value to a
bit 
+		 * Which returns the highest (power) Dx state supported
in
+		 * this system (Sx) state.  We convert this value to a
bit
 		 * mask of supported states (conceptually simpler).
 		 */
-		status = bm_evaluate_simple_integer(device->acpi_handle,
+		status = bm_evaluate_simple_integer(device->acpi_handle,
 			object_name, &dx_supported);
 		if (ACPI_SUCCESS(status)) {
 			switch (dx_supported) {
 			case 0:
-				device->power.dx_supported[i] |= 
+				device->power.dx_supported[i] |=
 					BM_FLAGS_D0_SUPPORT;
 				/* fall through */
 			case 1:
-				device->power.dx_supported[i] |= 
+				device->power.dx_supported[i] |=
 					BM_FLAGS_D1_SUPPORT;
 				/* fall through */
 			case 2:
-				device->power.dx_supported[i] |= 
+				device->power.dx_supported[i] |=
 					BM_FLAGS_D2_SUPPORT;
 				/* fall through */
 			case 3:
-				device->power.dx_supported[i] |= 
+				device->power.dx_supported[i] |=
 					BM_FLAGS_D3_SUPPORT;
 				break;
 			}
@@ -381,12 +381,12 @@
 			/*
 			 * Validate:
 			 * ---------
-			 * Mask of any states that _Sx_d falsely
advertises 
-			 * (e.g.claims D1 support but neither _PR2 or
_PS2 
-			 * exist).  In other words, S1-S5 can't offer a
Dx 
+			 * Mask of any states that _Sx_d falsely
advertises
+			 * (e.g.claims D1 support but neither _PR2 or
_PS2
+			 * exist).  In other words, S1-S5 can't offer a
Dx
 			 * state that isn't supported by S0.
 			 */
-			device->power.dx_supported[i] &= 
+			device->power.dx_supported[i] &=
 
device->power.dx_supported[ACPI_STATE_S0];
 		}
 
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmpower.c
--- trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmpower.c
2005-05-08 02:15:21 UTC (rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmpower.c
2005-05-08 02:16:32 UTC (rev 15108)
@@ -27,7 +27,7 @@

  * TODO:
  * -----
  *	1. Sequencing of power resource list transitions.
- *	2. Global serialization of power resource transtions (see ACPI 
+ *	2. Global serialization of power resource transtions (see ACPI
  *         spec section 7.1.2/7.1.3).
  *      3. Better error handling.
  */
@@ -51,13 +51,13 @@
 	BM_NOTIFY               notify_type,
 	BM_HANDLE               device_handle,
 	void                    **context);
-	
+
 ACPI_STATUS
 bm_pr_request (
 	BM_REQUEST		*request,
 	void                    *context);
 
-	
+
 
/***********************************************************************
*****
  *                             Internal Functions
 
************************************************************************
****/
@@ -133,7 +133,7 @@
 
 	pr->state = ACPI_STATE_UNKNOWN;
 
-	/* 
+	/*
 	 * Evaluate _STA:
 	 * --------------
 	 * Evalute _STA to determine whether the power resource is ON or
OFF.
@@ -151,7 +151,7 @@
 	}
 
 	/*
-	 * Mask off all bits but the first as some systems return
non-standard 
+	 * Mask off all bits but the first as some systems return
non-standard
 	 * values (e.g. 0x51).
 	 */
 	switch (device_status & 0x01) {
@@ -269,7 +269,7 @@
 	 * -----------------------------
 	 * The current state of a list of power resources is ON if all
 	 * power resources are currently in the ON state.  In other
words,
-	 * if any power resource in the list is OFF then the collection 
+	 * if any power resource in the list is OFF then the collection
 	 * isn't fully ON.
 	 */
 	for (i = 0; i < pr_list->count; i++) {
@@ -328,13 +328,13 @@
 	/*
 	 * Reference Target:
 	 * -----------------
-	 * Reference all resources for the target power state first (so 
-	 * the device doesn't get turned off while transitioning).
Power 
+	 * Reference all resources for the target power state first (so
+	 * the device doesn't get turned off while transitioning).
Power
 	 * resources that aren't on (new reference count of 1) are
turned on.
 	 */
 	for (i = 0; i < target_list->count; i++) {
 
-		status = bm_get_device_context(target_list->handles[i], 
+		status = bm_get_device_context(target_list->handles[i],
 			(BM_DRIVER_CONTEXT*)(&pr));
 		if (ACPI_FAILURE(status)) {
 			DEBUG_PRINT(ACPI_WARN, ("Invalid reference to
power resource [0x%02X].\n", target_list->handles[i]));
@@ -355,12 +355,12 @@
 	 * Dereference Current:
 	 * --------------------
 	 * Dereference all resources for the current power state.  Power
-	 * resources no longer referenced (new reference count of 0) are
+	 * resources no longer referenced (new reference count of 0) are
 	 * turned off.
 	 */
 	for (i = 0; i < current_list->count; i++) {
 
-		status = bm_get_device_context(current_list->handles[i],
+		status = bm_get_device_context(current_list->handles[i],
 			(BM_DRIVER_CONTEXT*)(&pr));
 		if (ACPI_FAILURE(status)) {
 			DEBUG_PRINT(ACPI_WARN, ("Invalid reference to
power resource [0x%02X].\n", target_list->handles[i]));
@@ -434,7 +434,7 @@
 	pr->device_handle = device->handle;
 	pr->acpi_handle = device->acpi_handle;
 
-	/* 
+	/*
 	 * Get information on this power resource.
 	 */
 	status = acpi_evaluate_object(pr->acpi_handle, NULL, NULL,
&buffer);
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmrequest.c
--- trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmrequest.c
2005-05-08 02:15:21 UTC (rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmrequest.c
2005-05-08 02:16:32 UTC (rev 15108)
@@ -62,7 +62,7 @@

 
 	DEBUG_PRINT(ACPI_INFO, ("Sending request [0x%02x] to device
[0x%02x].\n", request->command, node->device.handle));
 
-	if (!(node->device.flags & BM_FLAGS_DRIVER_CONTROL) || 
+	if (!(node->device.flags & BM_FLAGS_DRIVER_CONTROL) ||
 		!(node->driver.request)) {
 		DEBUG_PRINT(ACPI_WARN, ("No driver installed for device
[0x%02x].\n", node->device.handle));
 		return_ACPI_STATUS(AE_NOT_EXIST);
@@ -137,7 +137,7 @@
 		if (ACPI_FAILURE(status)) {
 			break;
 		}
-		status = bm_copy_to_buffer(&(request->buffer), 
+		status = bm_copy_to_buffer(&(request->buffer),
 			&(device->power.state), sizeof(BM_POWER_STATE));
 		break;
 
@@ -145,7 +145,7 @@
 	{
 		BM_POWER_STATE *power_state = NULL;
 
-		status = bm_cast_buffer(&(request->buffer), 
+		status = bm_cast_buffer(&(request->buffer),
 			(void**)&power_state, sizeof(BM_POWER_STATE));
 		if (ACPI_FAILURE(status)) {
 			break;
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmsearch.c
--- trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmsearch.c
2005-05-08 02:15:21 UTC (rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmsearch.c
2005-05-08 02:16:32 UTC (rev 15108)
@@ -57,7 +57,7 @@

 		return AE_BAD_PARAMETER;
 	}
 
-	/* 
+	/*
 	 * Present?
 	 * --------
 	 * We're only going to match on devices that are present.
@@ -67,22 +67,22 @@
 		return AE_NOT_FOUND;
 	}
 
-	/* 
+	/*
 	 * type?
 	 */
 	if (criteria->type && !(criteria->type & device->id.type)) {
 		return AE_NOT_FOUND;
 	}
 
-	/* 
+	/*
 	 * hid?
 	 */
-	if ((criteria->hid[0]) && (0 != STRNCMP(criteria->hid, 
+	if ((criteria->hid[0]) && (0 != STRNCMP(criteria->hid,
 		device->id.hid, sizeof(BM_DEVICE_HID)))) {
 		return AE_NOT_FOUND;
 	}
 
-	/* 
+	/*
 	 * adr?
 	 */
 	if ((criteria->adr) && (criteria->adr != device->id.adr)) {
@@ -149,7 +149,7 @@
 		if (node->scope.head) {
 			status = bm_compare(&(node->device), criteria);
 			if (ACPI_SUCCESS(status)) {
-				results->handles[results->count++] = 
+				results->handles[results->count++] =
 					node->device.handle;
 			}
 			node = node->scope.head;
@@ -163,16 +163,16 @@
 		else {
 			status = bm_compare(&(node->device), criteria);
 			if (ACPI_SUCCESS(status)) {
-				results->handles[results->count++] = 
+				results->handles[results->count++] =
 					node->device.handle;
 			}
 
 			/*
 			 * Locate Next Device:
 			 * -------------------
-			 * The next node is either a peer at this level 
-			 * (node->next is valid), or we work are way
back 
-			 * up the tree until we either find a non-parsed
+			 * The next node is either a peer at this level
+			 * (node->next is valid), or we work are way
back
+			 * up the tree until we either find a non-parsed
 			 * peer or hit the top (node->parent is NULL).
 			 */
 			while (!node->next && node->parent) {
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmutils.c
--- trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmutils.c
2005-05-08 02:15:21 UTC (rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmutils.c
2005-05-08 02:16:32 UTC (rev 15108)
@@ -199,7 +199,7 @@

 
 	if (!package || (package->type != ACPI_TYPE_PACKAGE) ||
 		(package->package.count == 0) || !package_format ||
-		(package_format->length < 1) || 
+		(package_format->length < 1) ||
 		(!package_format->pointer) || !buffer) {
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
@@ -228,7 +228,7 @@
 				tail_offset += sizeof(ACPI_INTEGER);
 				break;
 			case 'S':
-				size_required += sizeof(u8*) + 
+				size_required += sizeof(u8*) +
 					sizeof(ACPI_INTEGER) + 1;
 				tail_offset += sizeof(ACPI_INTEGER);
 				break;
@@ -243,12 +243,12 @@
 		case ACPI_TYPE_BUFFER:
 			switch (format[i]) {
 			case 'S':
-				size_required += sizeof(u8*) + 
+				size_required += sizeof(u8*) +
 					element->string.length + 1;
 				tail_offset += sizeof(u8*);
 				break;
 			case 'B':
-				size_required += sizeof(u8*) + 
+				size_required += sizeof(u8*) +
 					element->buffer.length;
 				tail_offset += sizeof(u8*);
 				break;
@@ -293,14 +293,14 @@
 		case ACPI_TYPE_INTEGER:
 			switch (format[i]) {
 			case 'N':
-				*((ACPI_INTEGER*)head) = 
+				*((ACPI_INTEGER*)head) =
 					element->integer.value;
 				head += sizeof(ACPI_INTEGER);
 				break;
 			case 'S':
 				pointer = (u8**)head;
 				*pointer = tail;
-				*((ACPI_INTEGER*)tail) = 
+				*((ACPI_INTEGER*)tail) =
 					element->integer.value;
 				head += sizeof(ACPI_INTEGER*);
 				tail += sizeof(ACPI_INTEGER);
@@ -320,7 +320,7 @@
 			case 'S':
 				pointer = (u8**)head;
 				*pointer = tail;
-				memcpy(tail, element->string.pointer, 
+				memcpy(tail, element->string.pointer,
 					element->string.length);
 				head += sizeof(u8*);
 				tail += element->string.length;
@@ -331,7 +331,7 @@
 			case 'B':
 				pointer = (u8**)head;
 				*pointer = tail;
-				memcpy(tail, element->buffer.pointer, 
+				memcpy(tail, element->buffer.pointer,
 					element->buffer.length);
 				head += sizeof(u8*);
 				tail += element->buffer.length;
@@ -361,11 +361,11 @@
  * PARAMETERS:  <TBD>
  *
  * RETURN:      AE_OK
- *              AE_BUFFER_OVERFLOW  Evaluated object returned data, but
+ *              AE_BUFFER_OVERFLOW  Evaluated object returned data, but
  *                                  caller did not provide buffer.
  *
  * DESCRIPTION: Helper for acpi_evaluate_object that handles buffer
- *              allocation.  Note that the caller is responsible for 
+ *              allocation.  Note that the caller is responsible for
  *              freeing buffer->pointer!
  *
 
************************************************************************
****/
@@ -389,8 +389,8 @@
 	/*
 	 * Evalute Object:
 	 * ---------------
-	 * The first attempt is just to get the size of the object data 
-	 * (that is unless there's no return data, e.g. _INI); the
second 
+	 * The first attempt is just to get the size of the object data
+	 * (that is unless there's no return data, e.g. _INI); the
second
 	 * gets the data.
 	 */
 	status = acpi_evaluate_object(acpi_handle, pathname, arguments,
buffer);
@@ -407,14 +407,14 @@
 		}
 
 		/* Re-evaluate -- this time it should work */
-		status = acpi_evaluate_object(acpi_handle, pathname, 
+		status = acpi_evaluate_object(acpi_handle, pathname,
 			arguments, buffer);
 	}
 
 	if (ACPI_FAILURE(status)) {
 		DEBUG_EVAL_ERROR(ACPI_WARN, acpi_handle, pathname,
status);
 		if (buffer && buffer->pointer) {
-			acpi_os_free(buffer->pointer); 
+			acpi_os_free(buffer->pointer);
 			buffer->pointer = NULL;
 			buffer->length = 0;
 		}
@@ -467,7 +467,7 @@
 	 * Validate Data:
 	 * --------------
 	 */
-	status = bm_cast_buffer(&buffer, (void**)&element, 
+	status = bm_cast_buffer(&buffer, (void**)&element,
 		sizeof(ACPI_OBJECT));
 	if (ACPI_FAILURE(status)) {
 		DEBUG_EVAL_ERROR(ACPI_WARN, acpi_handle, pathname,
status);
@@ -535,7 +535,7 @@
 	 * Validate Package:
 	 * -----------------
 	 */
-	status = bm_cast_buffer(&buffer, (void**)&package, 
+	status = bm_cast_buffer(&buffer, (void**)&package,
 		sizeof(ACPI_OBJECT));
 	if (ACPI_FAILURE(status)) {
 		DEBUG_EVAL_ERROR(ACPI_WARN, acpi_handle, pathname,
status);
@@ -571,7 +571,7 @@
 		 * Resolve reference string (e.g. "\_PR_.CPU_") to an
 		 * ACPI_HANDLE.
 		 */
-		status = acpi_get_handle(acpi_handle, 
+		status = acpi_get_handle(acpi_handle,
 			element->string.pointer, &reference_handle);
 		if (ACPI_FAILURE(status)) {
 			status = AE_BAD_DATA;
@@ -583,7 +583,7 @@
 		/*
 		 * Resolve ACPI_HANDLE to BM_HANDLE.
 		 */
-		status = bm_get_handle(reference_handle, 
+		status = bm_get_handle(reference_handle,
 			&(reference_list->handles[i]));
 		if (ACPI_FAILURE(status)) {
 			status = AE_BAD_DATA;
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmxface.c
--- trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmxface.c
2005-05-08 02:15:21 UTC (rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/busmgr/bmxface.c
2005-05-08 02:16:32 UTC (rev 15108)
@@ -79,7 +79,7 @@

 	if (!BM_NODE_PRESENT(node->parent)) {
 		return_ACPI_STATUS(AE_OK);
 	}
-	
+
 	/*
 	 * Dynamic Status?
 	 * ---------------
@@ -94,7 +94,7 @@
 	 * Evaluate _STA:
 	 * --------------
 	 */
-	status = bm_evaluate_simple_integer(node->device.acpi_handle,
"_STA", 
+	status = bm_evaluate_simple_integer(node->device.acpi_handle,
"_STA",
 		&(node->device.status));
 	if (ACPI_SUCCESS(status)) {
 		*device_status = node->device.status;
@@ -232,7 +232,7 @@
 	/*
 	 * Install driver:
 	 * ----------------
-	 * For each match, record the driver information and execute the
+	 * For each match, record the driver information and execute the
 	 * driver's Notify() funciton (if present) to notify the driver
 	 * of the device's presence.
 	 */
@@ -247,7 +247,7 @@
 		DEBUG_PRINT(ACPI_INFO, ("Registering driver for device
[0x%02x].\n", node->device.handle));
 
 		/* Notify driver of new device. */
-		status = driver->notify(BM_NOTIFY_DEVICE_ADDED, 
+		status = driver->notify(BM_NOTIFY_DEVICE_ADDED,
 			node->device.handle, &(node->driver.context));
 		if (ACPI_SUCCESS(status)) {
 			node->driver.notify = driver->notify;
@@ -319,7 +319,7 @@
 		DEBUG_PRINT(ACPI_INFO, ("Unregistering driver for device
[0x%02x].\n", node->device.handle));
 
 		/* Notify driver of device removal. */
-		status = node->driver.notify(BM_NOTIFY_DEVICE_REMOVED, 
+		status = node->driver.notify(BM_NOTIFY_DEVICE_REMOVED,
 			node->device.handle, &(node->driver.context));
 
 		node->device.flags &= ~BM_FLAGS_DRIVER_CONTROL;
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/fdo.c
--- trunk/reactos/drivers/bus/acpi/ospm/fdo.c	2005-05-08 02:15:21 UTC
(rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/fdo.c	2005-05-08 02:16:32 UTC
(rev 15108)
@@ -128,7 +128,7 @@

   RESOURCE* resource;
   ULONG i;
   KIRQL Dirql;
-  
+
   /* Count number of resources */
   Done = FALSE;
   resource = resources;
@@ -161,7 +161,7 @@
     }
     resource = (RESOURCE *) ((NATIVE_UINT) resource + (NATIVE_UINT)
resource->length);
   }
-  
+
   /* Allocate memory */
   *ResourceListSize = sizeof(CM_RESOURCE_LIST) +
sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR) * (NumberOfResources - 1);
   ResourceList = (PCM_RESOURCE_LIST)ExAllocatePool(PagedPool,
*ResourceListSize);
@@ -175,7 +175,7 @@
   ResourceList->List[0].PartialResourceList.Revision = 1;
   ResourceList->List[0].PartialResourceList.Count = NumberOfResources;
   ResourceDescriptor =
ResourceList->List[0].PartialResourceList.PartialDescriptors;
-  
+
   /* Fill resources list structure */
   Done = FALSE;
   resource = resources;
@@ -189,7 +189,7 @@
         for (i = 0; i < irq_data->number_of_interrupts; i++)
         {
           ResourceDescriptor->Type = CmResourceTypeInterrupt;
-          
+
           ResourceDescriptor->ShareDisposition =
             (irq_data->shared_exclusive == SHARED ?
CmResourceShareShared : CmResourceShareDeviceExclusive);
           ResourceDescriptor->Flags =
@@ -253,7 +253,7 @@
     }
     resource = (RESOURCE *) ((NATIVE_UINT) resource + (NATIVE_UINT)
resource->length);
   }
-  
+
   acpi_rs_dump_resource_list(resource);
   return TRUE;
 }
  _____  

Modified: trunk/reactos/drivers/bus/acpi/ospm/include/bm.h
--- trunk/reactos/drivers/bus/acpi/ospm/include/bm.h	2005-05-08
02:15:21 UTC (rev 15107)
+++ trunk/reactos/drivers/bus/acpi/ospm/include/bm.h	2005-05-08
02:16:32 UTC (rev 15108)
@@ -158,7 +158,7 @@

 #define BM_HID_SLEEP_BUTTON		"PNP0C0E"
 
 /*
- * BM_DEVICE_CID: 
+ * BM_DEVICE_CID:
  *     The compatibility ID can be a string with 44 characters
  *     The extra pad is in case there is a change.  It also
  *     provides 8 byte alignment for the BM_DEVICE_ID structure.
@@ -564,7 +564,7 @@
 
 ACPI_STATUS
[truncated at 1000 lines; 39227 more skipped]