[hbelusca] 70837: [USETUP] - bootsup.c/.h, usetup.c: Save the old MBR sector in the system partition (this makes easier to restore the old one). - fslist.c/.h, usetup.h: Fix header inclusion order....
1 Mar
2016
1 Mar
'16
3 p.m.
Author: hbelusca
Date: Tue Mar 1 15:00:56 2016
New Revision: 70837
URL: http://svn.reactos.org/svn/reactos?rev=70837&view=rev
Log:
[USETUP]
- bootsup.c/.h, usetup.c: Save the old MBR sector in the system partition (this makes
easier to restore the old one).
- fslist.c/.h, usetup.h: Fix header inclusion order.
- partlist.c/.h, usetup.c: On BIOS-PC architectures, the system partition can be formatted
in any FS as long as it is the active partition (on the contrary, on architectures where
such system partition is required, it is formatted in FAT). We currently do not have write
support for all FSes out there (apart for FAT until now), so do a "clever"
"trick" to work around this problem: on initialized disks, find the active
partition and check its FS. If we support write access to this FS then we're OK,
otherwise we change the (active) system partition for the one on which we are going to
install ReactOS (which is, by construction, formatted with a FS on which we support write
access).
The MBR (resp. the VBR) of the disk (resp. of the system partition) are always saved into
files, making easy for people to boot on them (using FreeLdr) or restoring them.
CORE-10898
Modified:
trunk/reactos/base/setup/usetup/bootsup.c
trunk/reactos/base/setup/usetup/bootsup.h
trunk/reactos/base/setup/usetup/fslist.c
trunk/reactos/base/setup/usetup/fslist.h
trunk/reactos/base/setup/usetup/interface/usetup.c
trunk/reactos/base/setup/usetup/partlist.c
trunk/reactos/base/setup/usetup/partlist.h
trunk/reactos/base/setup/usetup/usetup.h
Modified: trunk/reactos/base/setup/usetup/bootsup.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/base/setup/usetup/bootsup.…
==============================================================================
--- trunk/reactos/base/setup/usetup/bootsup.c [iso-8859-1] (original)
+++ trunk/reactos/base/setup/usetup/bootsup.c [iso-8859-1] Tue Mar 1 15:00:56 2016
@@ -626,7 +626,6 @@
return STATUS_SUCCESS;
}
-static
BOOLEAN
IsThereAValidBootSector(PWSTR RootPath)
{
@@ -695,9 +694,8 @@
return (Instruction != 0x00000000);
}
-static
NTSTATUS
-SaveCurrentBootSector(
+SaveBootSector(
PWSTR RootPath,
PWSTR DstPath,
ULONG Length)
@@ -1210,7 +1208,7 @@
NULL,
&IoStatusBlock,
OrigBootSector,
- SECTORSIZE,
+ sizeof(PARTITION_SECTOR),
&FileOffset,
NULL);
NtClose(FileHandle);
@@ -1306,7 +1304,7 @@
NULL,
&IoStatusBlock,
NewBootSector,
- SECTORSIZE,
+ sizeof(PARTITION_SECTOR),
&FileOffset,
NULL);
NtClose(FileHandle);
@@ -2447,10 +2445,10 @@
wcscat(DstPath, BootSectorFileName);
DPRINT1("Save bootsector: %S ==> %S\n",
SystemRootPath->Buffer, DstPath);
- Status = SaveCurrentBootSector(SystemRootPath->Buffer, DstPath,
SECTORSIZE);
+ Status = SaveBootSector(SystemRootPath->Buffer, DstPath, SECTORSIZE);
if (!NT_SUCCESS(Status))
{
- DPRINT1("SaveCurrentBootSector() failed (Status %lx)\n",
Status);
+ DPRINT1("SaveBootSector() failed (Status %lx)\n", Status);
return Status;
}
}
@@ -2582,10 +2580,10 @@
wcscat(DstPath, L"\\bootsect.old");
DPRINT1("Save bootsector: %S ==> %S\n",
SystemRootPath->Buffer, DstPath);
- Status = SaveCurrentBootSector(SystemRootPath->Buffer, DstPath,
sizeof(EXT2_BOOTSECTOR));
+ Status = SaveBootSector(SystemRootPath->Buffer, DstPath,
sizeof(EXT2_BOOTSECTOR));
if (!NT_SUCCESS(Status))
{
- DPRINT1("SaveCurrentBootSector() failed (Status %lx)\n",
Status);
+ DPRINT1("SaveBootSector() failed (Status %lx)\n", Status);
return Status;
}
}
Modified: trunk/reactos/base/setup/usetup/bootsup.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/base/setup/usetup/bootsup.…
==============================================================================
--- trunk/reactos/base/setup/usetup/bootsup.h [iso-8859-1] (original)
+++ trunk/reactos/base/setup/usetup/bootsup.h [iso-8859-1] Tue Mar 1 15:00:56 2016
@@ -26,6 +26,15 @@
#pragma once
+BOOLEAN
+IsThereAValidBootSector(PWSTR RootPath);
+
+NTSTATUS
+SaveBootSector(
+ PWSTR RootPath,
+ PWSTR DstPath,
+ ULONG Length);
+
NTSTATUS
InstallMbrBootCodeToDisk(
PWSTR SrcPath,
Modified: trunk/reactos/base/setup/usetup/fslist.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/base/setup/usetup/fslist.c…
==============================================================================
--- trunk/reactos/base/setup/usetup/fslist.c [iso-8859-1] (original)
+++ trunk/reactos/base/setup/usetup/fslist.c [iso-8859-1] Tue Mar 1 15:00:56 2016
@@ -91,7 +91,7 @@
PFILE_SYSTEM_ITEM
GetFileSystem(
IN PFILE_SYSTEM_LIST FileSystemList,
- IN PPARTENTRY PartEntry)
+ IN struct _PARTENTRY* PartEntry)
{
PFILE_SYSTEM_ITEM CurrentFileSystem;
LPWSTR FileSystemName = NULL;
@@ -101,6 +101,8 @@
/* We have a file system, return it */
if (CurrentFileSystem != NULL && CurrentFileSystem->FileSystemName !=
NULL)
return CurrentFileSystem;
+
+ DPRINT1("File system not found, try to guess one...\n");
CurrentFileSystem = NULL;
@@ -121,9 +123,9 @@
*/
if ((PartEntry->PartitionType == PARTITION_FAT_12) ||
(PartEntry->PartitionType == PARTITION_FAT_16) ||
- (PartEntry->PartitionType == PARTITION_HUGE) ||
+ (PartEntry->PartitionType == PARTITION_HUGE ) ||
(PartEntry->PartitionType == PARTITION_XINT13) ||
- (PartEntry->PartitionType == PARTITION_FAT32) ||
+ (PartEntry->PartitionType == PARTITION_FAT32 ) ||
(PartEntry->PartitionType == PARTITION_FAT32_XINT13))
{
FileSystemName = L"FAT";
@@ -139,9 +141,9 @@
FileSystemName = L"NTFS"; /* FIXME: Not quite correct! */
}
- // WARNING: We cannot write on this FS yet!
+ // HACK: WARNING: We cannot write on this FS yet!
if (PartEntry->PartitionType == PARTITION_EXT2 || PartEntry->PartitionType ==
PARTITION_IFS)
- DPRINT1("Recognized FileSystem %S that doesn't support write support
yet!\n", FileSystemName);
+ DPRINT1("Recognized file system %S that doesn't support write support
yet!\n", FileSystemName);
DPRINT1("GetFileSystem -- PartitionType: 0x%02X ; FileSystemName (guessed):
%S\n",
PartEntry->PartitionType, FileSystemName);
Modified: trunk/reactos/base/setup/usetup/fslist.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/base/setup/usetup/fslist.h…
==============================================================================
--- trunk/reactos/base/setup/usetup/fslist.h [iso-8859-1] (original)
+++ trunk/reactos/base/setup/usetup/fslist.h [iso-8859-1] Tue Mar 1 15:00:56 2016
@@ -57,10 +57,11 @@
IN PFILE_SYSTEM_LIST List,
IN LPWSTR FileSystemName);
+struct _PARTENTRY; // Defined in partlist.h
PFILE_SYSTEM_ITEM
GetFileSystem(
IN PFILE_SYSTEM_LIST FileSystemList,
- IN PPARTENTRY PartEntry);
+ IN struct _PARTENTRY* PartEntry);
PFILE_SYSTEM_LIST
CreateFileSystemList(
Modified: trunk/reactos/base/setup/usetup/interface/usetup.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/base/setup/usetup/interfac…
==============================================================================
--- trunk/reactos/base/setup/usetup/interface/usetup.c [iso-8859-1] (original)
+++ trunk/reactos/base/setup/usetup/interface/usetup.c [iso-8859-1] Tue Mar 1 15:00:56
2016
@@ -1731,8 +1731,11 @@
return SELECT_PARTITION_PAGE;
}
- if (PartitionList->CurrentPartition->BootIndicator)
+ if (PartitionList->CurrentPartition->BootIndicator ||
+ PartitionList->CurrentPartition == PartitionList->SystemPartition)
+ {
return CONFIRM_DELETE_SYSTEM_PARTITION_PAGE;
+ }
return DELETE_PARTITION_PAGE;
}
@@ -2553,8 +2556,21 @@
return QUIT_PAGE;
}
+ /*** HACK! ***/
+ if (FileSystemList == NULL)
+ {
+ FileSystemList = CreateFileSystemList(6, 26,
PartitionList->CurrentPartition->New, L"FAT");
+ if (FileSystemList == NULL)
+ {
+ /* FIXME: show an error dialog */
+ return QUIT_PAGE;
+ }
+
+ /* FIXME: Add file systems to list */
+ }
+
/* Find or set the active system partition */
- CheckActiveSystemPartition(PartitionList);
+ CheckActiveSystemPartition(PartitionList, FileSystemList);
if (PartitionList->SystemDisk == NULL ||
PartitionList->SystemPartition == NULL)
@@ -4130,7 +4146,7 @@
PartitionList->SystemDisk->DiskNumber,
PartitionList->SystemPartition->PartitionNumber);
RtlCreateUnicodeString(&SystemRootPath, PathBuffer);
- DPRINT("SystemRootPath: %wZ\n", &SystemRootPath);
+ DPRINT1("SystemRootPath: %wZ\n", &SystemRootPath);
PartitionType = PartitionList->SystemPartition->PartitionType;
@@ -4382,6 +4398,7 @@
NTSTATUS Status;
WCHAR DestinationDevicePathBuffer[MAX_PATH];
WCHAR SourceMbrPathBuffer[MAX_PATH];
+ WCHAR DstPath[MAX_PATH];
/* Step 1: Write the VBR */
PartitionType = PartitionList->SystemPartition->PartitionType;
@@ -4404,8 +4421,23 @@
wcscpy(SourceMbrPathBuffer, SourceRootPath.Buffer);
wcscat(SourceMbrPathBuffer, L"\\loader\\dosmbr.bin");
- DPRINT("Install MBR bootcode: %S ==> %S\n",
+ DPRINT1("Install MBR bootcode: %S ==> %S\n",
SourceMbrPathBuffer, DestinationDevicePathBuffer);
+
+ if (IsThereAValidBootSector(DestinationDevicePathBuffer))
+ {
+ /* Save current MBR */
+ wcscpy(DstPath, SystemRootPath.Buffer);
+ wcscat(DstPath, L"\\mbr.old");
+
+ DPRINT1("Save MBR: %S ==> %S\n", DestinationDevicePathBuffer,
DstPath);
+ Status = SaveBootSector(DestinationDevicePathBuffer, DstPath,
sizeof(PARTITION_SECTOR));
+ if (!NT_SUCCESS(Status))
+ {
+ DPRINT1("SaveBootSector() failed (Status %lx)\n", Status);
+ // Don't care if we succeeded or not saving the old MBR, just go ahead.
+ }
+ }
Status = InstallMbrBootCodeToDisk(SourceMbrPathBuffer,
DestinationDevicePathBuffer);
Modified: trunk/reactos/base/setup/usetup/partlist.c
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/base/setup/usetup/partlist…
==============================================================================
--- trunk/reactos/base/setup/usetup/partlist.c [iso-8859-1] (original)
+++ trunk/reactos/base/setup/usetup/partlist.c [iso-8859-1] Tue Mar 1 15:00:56 2016
@@ -1430,6 +1430,8 @@
List->SystemDisk = NULL;
List->SystemPartition = NULL;
+ List->OriginalSystemDisk = NULL;
+ List->OriginalSystemPartition = NULL;
List->TempDisk = NULL;
List->TempPartition = NULL;
@@ -3111,28 +3113,25 @@
VOID
CheckActiveSystemPartition(
- PPARTLIST List)
+ IN PPARTLIST List,
+ IN PFILE_SYSTEM_LIST FileSystemList /* Needed for checking the FS of the candidate
system partition */
+ )
{
PDISKENTRY DiskEntry;
PPARTENTRY PartEntry;
PLIST_ENTRY ListEntry;
+ PFILE_SYSTEM_ITEM FileSystem;
+
/* Check for empty disk list */
if (IsListEmpty(&List->DiskListHead))
{
List->SystemDisk = NULL;
List->SystemPartition = NULL;
+ List->OriginalSystemDisk = NULL;
+ List->OriginalSystemPartition = NULL;
return;
}
-
-#if 0
- if (List->SystemDisk != NULL &&
- List->SystemPartition != NULL)
- {
- /* We already have an active system partition */
- return;
- }
-#endif
/* Choose the currently selected disk */
DiskEntry = List->CurrentDisk;
@@ -3142,64 +3141,226 @@
{
List->SystemDisk = NULL;
List->SystemPartition = NULL;
+ List->OriginalSystemDisk = NULL;
+ List->OriginalSystemPartition = NULL;
return;
}
- /*
- * Check the first partition of the disk in case it is fresh new,
- * and if so, use it as the system partition.
- */
-
+ if (List->SystemDisk != NULL && List->SystemPartition != NULL)
+ {
+ /* We already have an active system partition */
+ DPRINT1("Use the current system partition %lu in disk %lu, drive letter
%c\n",
+ List->SystemPartition->PartitionNumber,
+ List->SystemDisk->DiskNumber,
+ (List->SystemPartition->DriveLetter == 0) ? '-' :
List->SystemPartition->DriveLetter);
+ return;
+ }
+
+ DPRINT1("We are here (1)!\n");
+
+ List->SystemDisk = NULL;
+ List->SystemPartition = NULL;
+ List->OriginalSystemDisk = NULL;
+ List->OriginalSystemPartition = NULL;
+
+ /* Retrieve the first partition of the disk */
PartEntry = CONTAINING_RECORD(DiskEntry->PrimaryPartListHead.Flink,
PARTENTRY,
ListEntry);
-
- /* Set active system partition */
- if ((DiskEntry->NewDisk == TRUE) ||
- (PartEntry->BootIndicator == FALSE))
- {
- PartEntry->BootIndicator = TRUE;
-
DiskEntry->LayoutBuffer->PartitionEntry[PartEntry->PartitionIndex].BootIndicator
= TRUE;
-
DiskEntry->LayoutBuffer->PartitionEntry[PartEntry->PartitionIndex].RewritePartition
= TRUE;
- DiskEntry->Dirty = TRUE;
-
- /* FIXME: Might be incorrect if partitions were created by Linux FDISK */
- List->SystemDisk = DiskEntry;
- List->SystemPartition = PartEntry;
-
- return;
- }
-
- /* Disk is not new, scan all partitions to find a bootable one */
- List->SystemDisk = NULL;
- List->SystemPartition = NULL;
-
+ List->SystemDisk = DiskEntry;
+ List->SystemPartition = PartEntry;
+
+ //
+ // See:
https://svn.reactos.org/svn/reactos/trunk/reactos/base/setup/usetup/partlis…
+ //
+
+ /* Check if the disk is new and if so, use its first partition as the active system
partition */
+ if (DiskEntry->NewDisk)
+ {
+ if (PartEntry->PartitionType == PARTITION_ENTRY_UNUSED ||
PartEntry->BootIndicator == FALSE)
+ {
+ /* FIXME: Might be incorrect if partitions were created by Linux FDISK */
+ List->SystemDisk = DiskEntry;
+ List->SystemPartition = PartEntry;
+
+ List->OriginalSystemDisk = List->SystemDisk;
+ List->OriginalSystemPartition = List->SystemPartition;
+
+ DPRINT1("Use new first active system partition %lu in disk %lu, drive
letter %c\n",
+ List->SystemPartition->PartitionNumber,
+ List->SystemDisk->DiskNumber,
+ (List->SystemPartition->DriveLetter == 0) ? '-' :
List->SystemPartition->DriveLetter);
+
+ goto SetSystemPartition;
+ }
+
+ // FIXME: What to do??
+ DPRINT1("NewDisk TRUE but first partition is used?\n");
+ }
+
+ DPRINT1("We are here (2)!\n");
+
+ /*
+ * The disk is not new, check if any partition is initialized;
+ * if not, the first one becomes the system partition.
+ */
ListEntry = DiskEntry->PrimaryPartListHead.Flink;
while (ListEntry != &DiskEntry->PrimaryPartListHead)
{
+ /* Retrieve the partition and go to the next one */
PartEntry = CONTAINING_RECORD(ListEntry,
PARTENTRY,
ListEntry);
- /* Check if it is partitioned */
- if (PartEntry->IsPartitioned)
- {
- if (PartEntry->PartitionType != PARTITION_ENTRY_UNUSED &&
- PartEntry->BootIndicator)
+ /* Check if the partition is partitioned and is used */
+ if (PartEntry->PartitionType != PARTITION_ENTRY_UNUSED ||
PartEntry->BootIndicator != FALSE)
+ {
+ break;
+ }
+
+ /* Go to the next one */
+ ListEntry = ListEntry->Flink;
+ }
+ if (ListEntry == &DiskEntry->PrimaryPartListHead)
+ {
+ /*
+ * OK we haven't encountered any used and active partition,
+ * so use the first one as the system partition.
+ */
+
+ /* FIXME: Might be incorrect if partitions were created by Linux FDISK */
+ List->OriginalSystemDisk = List->SystemDisk; // DiskEntry
+ List->OriginalSystemPartition = List->SystemPartition; // First PartEntry
+
+ DPRINT1("Use first active system partition %lu in disk %lu, drive letter
%c\n",
+ List->SystemPartition->PartitionNumber,
+ List->SystemDisk->DiskNumber,
+ (List->SystemPartition->DriveLetter == 0) ? '-' :
List->SystemPartition->DriveLetter);
+
+ goto SetSystemPartition;
+ }
+
+ List->SystemDisk = NULL;
+ List->SystemPartition = NULL;
+ List->OriginalSystemDisk = NULL;
+ List->OriginalSystemPartition = NULL;
+
+ DPRINT1("We are here (3)!\n");
+
+ /* The disk is not new, scan all partitions to find the (active) system partition */
+ ListEntry = DiskEntry->PrimaryPartListHead.Flink;
+ while (ListEntry != &DiskEntry->PrimaryPartListHead)
+ {
+ /* Retrieve the partition and go to the next one */
+ PartEntry = CONTAINING_RECORD(ListEntry,
+ PARTENTRY,
+ ListEntry);
+ ListEntry = ListEntry->Flink;
+
+ /* Check if the partition is partitioned and used */
+ if (PartEntry->IsPartitioned &&
+ PartEntry->PartitionType != PARTITION_ENTRY_UNUSED)
+ {
+ /* Check if the partition is active */
+ if (PartEntry->BootIndicator)
{
/* Yes, we found it */
List->SystemDisk = DiskEntry;
List->SystemPartition = PartEntry;
- DPRINT("Found bootable partition disk %d, drive letter %c\n",
- DiskEntry->DiskNumber, PartEntry->DriveLetter);
+ DPRINT1("Found active system partition %lu in disk %lu, drive letter
%c\n",
+ PartEntry->PartitionNumber,
+ DiskEntry->DiskNumber,
+ (PartEntry->DriveLetter == 0) ? '-' :
PartEntry->DriveLetter);
break;
}
}
-
- /* Go to the next one */
- ListEntry = ListEntry->Flink;
- }
+ }
+
+ /* Check if we have found the system partition */
+ if (List->SystemDisk == NULL || List->SystemPartition == NULL)
+ {
+ /* Nothing, use the alternative system partition */
+ DPRINT1("No system partition found, use the alternative
partition!\n");
+ goto UseAlternativeSystemPartition;
+ }
+
+ /* Save them */
+ List->OriginalSystemDisk = List->SystemDisk;
+ List->OriginalSystemPartition = List->SystemPartition;
+
+ /*
+ * ADDITIONAL CHECKS / BIG HACK:
+ *
+ * Retrieve its file system and check whether we have
+ * write support for it. If that is the case we are fine
+ * and we can use it directly. However if we don't have
+ * write support we will need to change the active system
+ * partition.
+ *
+ * NOTE that this is completely useless on architectures
+ * where a real system partition is required, as on these
+ * architectures the partition uses the FAT FS, for which
+ * we do have write support.
+ * NOTE also that for those architectures looking for a
+ * partition boot indicator is insufficient.
+ */
+ FileSystem = GetFileSystem(FileSystemList, List->OriginalSystemPartition);
+ if (FileSystem == NULL)
+ {
+ DPRINT1("System partition %lu in disk %lu with no FS?!\n",
+ List->OriginalSystemPartition->PartitionNumber,
+ List->OriginalSystemDisk->DiskNumber);
+ goto FindAndUseAlternativeSystemPartition;
+ }
+ // HACK: WARNING: We cannot write on this FS yet!
+ // See fslist.c:GetFileSystem()
+ if (List->OriginalSystemPartition->PartitionType == PARTITION_EXT2 ||
+ List->OriginalSystemPartition->PartitionType == PARTITION_IFS)
+ {
+ DPRINT1("Recognized file system %S that doesn't support write support
yet!\n",
+ FileSystem->FileSystemName);
+ goto FindAndUseAlternativeSystemPartition;
+ }
+
+ DPRINT1("Use existing active system partition %lu in disk %lu, drive letter
%c\n",
+ List->SystemPartition->PartitionNumber,
+ List->SystemDisk->DiskNumber,
+ (List->SystemPartition->DriveLetter == 0) ? '-' :
List->SystemPartition->DriveLetter);
+
+ return;
+
+FindAndUseAlternativeSystemPartition:
+ /*
+ * We are here because we have not found any (active) candidate
+ * system partition that we know how to support. What we are going
+ * to do is to change the existing system partition and use the
+ * partition on which we install ReactOS as the new system partition,
+ * and then we will need to add in FreeLdr's entry a boot entry to boot
+ * from the original system partition.
+ */
+
+ /* Unset the old system partition */
+ List->SystemPartition->BootIndicator = FALSE;
+
List->SystemDisk->LayoutBuffer->PartitionEntry[List->SystemPartition->PartitionIndex].BootIndicator
= FALSE;
+
List->SystemDisk->LayoutBuffer->PartitionEntry[List->SystemPartition->PartitionIndex].RewritePartition
= TRUE;
+ List->SystemDisk->Dirty = TRUE;
+
+UseAlternativeSystemPartition:
+ List->SystemDisk = List->CurrentDisk;
+ List->SystemPartition = List->CurrentPartition;
+
+ DPRINT1("Use alternative active system partition %lu in disk %lu, drive letter
%c\n",
+ List->SystemPartition->PartitionNumber,
+ List->SystemDisk->DiskNumber,
+ (List->SystemPartition->DriveLetter == 0) ? '-' :
List->SystemPartition->DriveLetter);
+
+SetSystemPartition:
+ /* Set the new active system partition */
+ List->SystemPartition->BootIndicator = TRUE;
+
List->SystemDisk->LayoutBuffer->PartitionEntry[List->SystemPartition->PartitionIndex].BootIndicator
= TRUE;
+
List->SystemDisk->LayoutBuffer->PartitionEntry[List->SystemPartition->PartitionIndex].RewritePartition
= TRUE;
+ List->SystemDisk->Dirty = TRUE;
}
Modified: trunk/reactos/base/setup/usetup/partlist.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/base/setup/usetup/partlist…
==============================================================================
--- trunk/reactos/base/setup/usetup/partlist.h [iso-8859-1] (original)
+++ trunk/reactos/base/setup/usetup/partlist.h [iso-8859-1] Tue Mar 1 15:00:56 2016
@@ -155,6 +155,15 @@
/* The system disk and partition where the boot manager resides */
PDISKENTRY SystemDisk;
PPARTENTRY SystemPartition;
+ /*
+ * The original system disk and partition in case we are redefining them
+ * because we do not have write support on them.
+ * Please not that this is partly a HACK and MUST NEVER happen on
+ * architectures where real system partitions are mandatory (because then
+ * they are formatted in FAT FS and we support write operation on them).
+ */
+ PDISKENTRY OriginalSystemDisk;
+ PPARTENTRY OriginalSystemPartition;
PDISKENTRY TempDisk;
PPARTENTRY TempPartition;
@@ -258,7 +267,8 @@
VOID
CheckActiveSystemPartition(
- PPARTLIST List);
+ IN PPARTLIST List,
+ IN PFILE_SYSTEM_LIST FileSystemList);
BOOLEAN
WritePartitionsToDisk(
Modified: trunk/reactos/base/setup/usetup/usetup.h
URL:
http://svn.reactos.org/svn/reactos/trunk/reactos/base/setup/usetup/usetup.h…
==============================================================================
--- trunk/reactos/base/setup/usetup/usetup.h [iso-8859-1] (original)
+++ trunk/reactos/base/setup/usetup/usetup.h [iso-8859-1] Tue Mar 1 15:00:56 2016
@@ -60,7 +60,6 @@
/* Internal Headers */
#include "interface/consup.h"
-#include "partlist.h"
#include "inffile.h"
#include "inicache.h"
#include "progress.h"
@@ -70,6 +69,7 @@
#endif
#include "registry.h"
#include "fslist.h"
+#include "partlist.h"
#include "cabinet.h"
#include "filesup.h"
#include "genlist.h"
3221
days inactive
3221
days old
0 comments
1 participants
participants (1)
-
hbelusca＠svn.reactos.org