14 Mar
2019
14 Mar
'19
1:16 p.m.
https://git.reactos.org/?p=reactos.git;a=commitdiff;h=b91cf860cd04be4bbfcfa…
commit b91cf860cd04be4bbfcfa9cb9a479010554362d2
Author: Thomas Faber <thomas.faber(a)reactos.org>
AuthorDate: Wed Mar 13 12:36:23 2019 +0100
Commit: Thomas Faber <thomas.faber(a)reactos.org>
CommitDate: Thu Mar 14 13:16:43 2019 +0100
[UNIATA] Update to version 46e8. CORE-15843
---
drivers/storage/ide/uniata/atacmd_map.h | 2 +-
drivers/storage/ide/uniata/atapi.h | 1 +
drivers/storage/ide/uniata/bm_devs.h | 12 ++--
drivers/storage/ide/uniata/bsmaster.h | 11 ++-
drivers/storage/ide/uniata/config.h | 2 +
drivers/storage/ide/uniata/id_ata.cpp | 61 +++++++++++-----
drivers/storage/ide/uniata/id_dma.cpp | 19 +----
drivers/storage/ide/uniata/id_init.cpp | 123 ++++++++++++++++++++++++++------
drivers/storage/ide/uniata/id_probe.cpp | 26 +------
drivers/storage/ide/uniata/id_sata.cpp | 4 --
drivers/storage/ide/uniata/uniata_ver.h | 14 ++--
11 files changed, 172 insertions(+), 103 deletions(-)
diff --git a/drivers/storage/ide/uniata/atacmd_map.h
b/drivers/storage/ide/uniata/atacmd_map.h
index 6332feb3c3..9158bc8c5d 100644
--- a/drivers/storage/ide/uniata/atacmd_map.h
+++ b/drivers/storage/ide/uniata/atacmd_map.h
@@ -1,5 +1,5 @@
-// Build Version 0.46e3
+// Build Version 0.46e6
UCHAR const AtaCommands48[256] = {
diff --git a/drivers/storage/ide/uniata/atapi.h b/drivers/storage/ide/uniata/atapi.h
index 405cfb8467..a190e34013 100644
--- a/drivers/storage/ide/uniata/atapi.h
+++ b/drivers/storage/ide/uniata/atapi.h
@@ -253,6 +253,7 @@ typedef union _IDE_REGISTERS_2 {
#define DFLAGS_HIDDEN 0x8000 // Hidden device, available only with
special IOCTLs
// via communication virtual device
#define DFLAGS_MANUAL_CHS 0x10000 // For devices those have no IDENTIFY
commands
+#define DFLAGS_LBA32plus 0x20000 // Device is larger than LBA32
//#define DFLAGS_ 0x10000 //
//
// Used to disable 'advanced' features.
diff --git a/drivers/storage/ide/uniata/bm_devs.h b/drivers/storage/ide/uniata/bm_devs.h
index 89da4f1550..1de82b2f6e 100644
--- a/drivers/storage/ide/uniata/bm_devs.h
+++ b/drivers/storage/ide/uniata/bm_devs.h
@@ -155,7 +155,7 @@ BUSMASTER_CONTROLLER_INFORMATION_BASE const BusMasterAdapters[] = {
PCI_DEV_HW_SPEC_BM( 2920, 8086, 0x00, ATA_SA300, "Intel ICH9" , I6CH
| UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( 2926, 8086, 0x00, ATA_SA300, "Intel ICH9" , I6CH2
| UNIATA_SATA ),
- PCI_DEV_HW_SPEC_BM( 2921, 8086, 0x00, ATA_SA300, "Intel ICH9" ,
UNIATA_SATA | UNIATA_AHCI ),/* ??? */
+ PCI_DEV_HW_SPEC_BM( 2921, 8086, 0x00, ATA_SA300, "Intel ICH9" , I6CH2
| UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( 2922, 8086, 0x00, ATA_SA300, "Intel ICH9" ,
UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 2923, 8086, 0x00, ATA_SA300, "Intel ICH9" ,
UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 2925, 8086, 0x00, ATA_SA300, "Intel ICH9" ,
UNIATA_SATA | UNIATA_AHCI ),
@@ -244,12 +244,12 @@ BUSMASTER_CONTROLLER_INFORMATION_BASE const BusMasterAdapters[] = {
PCI_DEV_HW_SPEC_BM( 23a6, 8086, 0x00, ATA_SA300, "COLETOCRK" , UNIATA_SATA
| UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 2360, 197b, 0x00, ATA_SA300, "JMB360" ,
UNIATA_SATA | UNIATA_AHCI ),
- PCI_DEV_HW_SPEC_BM( 2361, 197b, 0x00, ATA_UDMA6, "JMB361" , 0
),
+ PCI_DEV_HW_SPEC_BM( 2361, 197b, 0x00, ATA_SA300, "JMB361" ,
UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( 2362, 197b, 0x00, ATA_SA300, "JMB362" ,
UNIATA_SATA | UNIATA_AHCI ),
- PCI_DEV_HW_SPEC_BM( 2363, 197b, 0x00, ATA_UDMA6, "JMB363" , 0
),
- PCI_DEV_HW_SPEC_BM( 2365, 197b, 0x00, ATA_UDMA6, "JMB365" , 0
),
- PCI_DEV_HW_SPEC_BM( 2366, 197b, 0x00, ATA_UDMA6, "JMB366" , 0
),
- PCI_DEV_HW_SPEC_BM( 2368, 197b, 0x00, ATA_UDMA6, "JMB368" , 0
),
+ PCI_DEV_HW_SPEC_BM( 2363, 197b, 0x00, ATA_SA300, "JMB363" ,
UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 2365, 197b, 0x00, ATA_SA300, "JMB365" ,
UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 2366, 197b, 0x00, ATA_SA300, "JMB366" ,
UNIATA_SATA ),
+ PCI_DEV_HW_SPEC_BM( 2368, 197b, 0x00, ATA_SA300, "JMB368" ,
UNIATA_SATA ),
/*
PCI_DEV_HW_SPEC_BM( 5040, 11ab, 0x00, ATA_SA150, "Marvell 88SX5040" ,
UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( 5041, 11ab, 0x00, ATA_SA150, "Marvell 88SX5041" ,
UNIATA_SATA ),
diff --git a/drivers/storage/ide/uniata/bsmaster.h
b/drivers/storage/ide/uniata/bsmaster.h
index 1e2332d75e..ac055b3be2 100644
--- a/drivers/storage/ide/uniata/bsmaster.h
+++ b/drivers/storage/ide/uniata/bsmaster.h
@@ -1,6 +1,6 @@
/*++
-Copyright (c) 2002-2014 Alexandr A. Telyatnikov (Alter)
+Copyright (c) 2002-2018 Alexandr A. Telyatnikov (Alter)
Module Name:
bsmaster.h
@@ -94,6 +94,9 @@ Licence:
#define ATA_MAX_IOLBA28 DEF_U64(0x0fffff80)
#define ATA_MAX_LBA28 DEF_U64(0x0fffffff)
+#define ATA_MAX_IOLBA32 DEF_U64(0xffffff80)
+#define ATA_MAX_LBA32 DEF_U64(0xffffffff)
+
#define ATA_DMA_ENTRIES 256 /* PAGESIZE/2/sizeof(BM_DMA_ENTRY)*/
#define ATA_DMA_EOT 0x80000000
@@ -1588,11 +1591,7 @@ AtapiChipInit(
IN ULONG c
);
-#ifdef __REACTOS__
-extern ULONG_PTR
-#else
-extern ULONG
-#endif
+extern ULONGIO_PTR
NTAPI
AtapiGetIoRange(
IN PVOID HwDeviceExtension,
diff --git a/drivers/storage/ide/uniata/config.h b/drivers/storage/ide/uniata/config.h
index b59de06467..0f21a9337e 100644
--- a/drivers/storage/ide/uniata/config.h
+++ b/drivers/storage/ide/uniata/config.h
@@ -103,6 +103,8 @@
#define CRNT_ILK_TYPE (PVOID)
#define CRNT_ILK_PTYPE (PVOID*)
#define REGRTL_STR_PTYPE (PWCHAR)
+ #define UlongToPtr(u) ((PVOID)((ULONG)(u)))
+ #define PtrToUlong(u) ((ULONG)((PVOID)(u)))
#endif //USE_REACTOS_DDK
/* Are we under GNU C (mingw) ??? */
diff --git a/drivers/storage/ide/uniata/id_ata.cpp
b/drivers/storage/ide/uniata/id_ata.cpp
index e8e5d009f2..26d9257ad0 100644
--- a/drivers/storage/ide/uniata/id_ata.cpp
+++ b/drivers/storage/ide/uniata/id_ata.cpp
@@ -1,6 +1,6 @@
/*++
-Copyright (c) 2002-2016 Alexandr A. Telyatnikov (Alter)
+Copyright (c) 2002-2018 Alexandr A. Telyatnikov (Alter)
Module Name:
id_ata.cpp
@@ -282,7 +282,7 @@ AtapiWritePort##sz( \
ASSERT(FALSE); /* We should never get here */ \
} \
if(!res->MemIo) { \
- ScsiPortWritePort##_Type((_type*)(ULONG_PTR)(res->Addr), data); \
+ ScsiPortWritePort##_Type((_type*)(ULONGIO_PTR)(res->Addr), data); \
} else { \
/*KdPrint(("r_mem @ (%x) %x\n", _port, port));*/ \
ScsiPortWriteRegister##_Type((_type*)(ULONG_PTR)(res->Addr), data); \
@@ -319,7 +319,7 @@ AtapiWritePortEx##sz( \
ASSERT(FALSE); /* We should never get here */ \
} \
if(!res->MemIo) { \
- ScsiPortWritePort##_Type((_type*)(ULONG_PTR)(res->Addr+offs), data); \
+ ScsiPortWritePort##_Type((_type*)(ULONGIO_PTR)(res->Addr+offs), data); \
} else { \
/*KdPrint(("r_mem @ (%x) %x\n", _port, port));*/ \
ScsiPortWriteRegister##_Type((_type*)(ULONG_PTR)(res->Addr+offs), data); \
@@ -355,7 +355,7 @@ AtapiReadPort##sz( \
} \
if(!res->MemIo) { \
/*KdPrint(("r_io @ (%x) %x\n", _port, res->Addr));*/ \
- return ScsiPortReadPort##_Type((_type*)(ULONG_PTR)(res->Addr)); \
+ return ScsiPortReadPort##_Type((_type*)(ULONGIO_PTR)(res->Addr)); \
} else { \
/*KdPrint(("r_mem @ (%x) %x\n", _port, res->Addr));*/ \
return ScsiPortReadRegister##_Type((_type*)(ULONG_PTR)(res->Addr)); \
@@ -390,7 +390,7 @@ AtapiReadPortEx##sz( \
ASSERT(FALSE); /* We should never get here */ \
} \
if(!res->MemIo) { \
- return ScsiPortReadPort##_Type((_type*)(ULONG_PTR)(res->Addr+offs)); \
+ return ScsiPortReadPort##_Type((_type*)(ULONGIO_PTR)(res->Addr+offs)); \
} else { \
/*KdPrint(("r_mem @ (%x) %x\n", _port, port));*/ \
return ScsiPortReadRegister##_Type((_type*)(ULONG_PTR)(res->Addr+offs)); \
@@ -435,7 +435,7 @@ AtapiReadBuffer##sz( \
} \
if(!res->MemIo) { \
/*KdPrint(("r_io @ (%x) %x\n", _port, res->Addr));*/ \
- ScsiPortReadPortBuffer##_Type((_type*)(ULONG_PTR)(res->Addr), (_type*)Buffer,
Count); \
+ ScsiPortReadPortBuffer##_Type((_type*)(ULONGIO_PTR)(res->Addr),
(_type*)Buffer, Count); \
return; \
} \
while(Count) { \
@@ -480,7 +480,7 @@ AtapiWriteBuffer##sz( \
} \
if(!res->MemIo) { \
/*KdPrint(("r_io @ (%x) %x\n", _port, res->Addr));*/ \
- ScsiPortWritePortBuffer##_Type((_type*)(ULONG_PTR)(res->Addr), (_type*)Buffer,
Count); \
+ ScsiPortWritePortBuffer##_Type((_type*)(ULONGIO_PTR)(res->Addr),
(_type*)Buffer, Count); \
return; \
} \
while(Count) { \
@@ -2093,6 +2093,10 @@ IssueIdentify(
}
}
+ if(NumOfSectors > ATA_MAX_IOLBA28) {
+ KdPrint2((PRINT_PREFIX "2TB threshold, force LBA64 WRITE
requirement\n"));
+ LunExt->DeviceFlags |= DFLAGS_LBA32plus;
+ }
} // if(LunExt->DeviceFlags & DFLAGS_LBA_ENABLED)
// fill IdentifyData with bogus geometry
@@ -5183,14 +5187,25 @@ ServiceInterrupt:
chan->AhciLastIS & ~(ATA_AHCI_P_IX_DHR | ATA_AHCI_P_IX_PS |
ATA_AHCI_P_IX_DS | ATA_AHCI_P_IX_SDB),
chan->AhciLastSError));
if(chan->AhciLastIS & ~ATA_AHCI_P_IX_OF) {
- //KdPrint3((PRINT_PREFIX "Err mask (%#x)\n",
chan->AhciLastIS & ~ATA_AHCI_P_IX_OF));
- // We have some other error except Overflow
- // Just signal ERROR, operation will be aborted in ERROR branch.
- statusByte |= IDE_STATUS_ERROR;
- AtaReq->ahci.in_serror = chan->AhciLastSError;
- if(chan->AhciLastSError & (ATA_SE_HANDSHAKE_ERR |
ATA_SE_LINKSEQ_ERR | ATA_SE_TRANSPORT_ERR | ATA_SE_UNKNOWN_FIS)) {
- KdPrint2((PRINT_PREFIX "Unrecoverable\n"));
- NoRetry = TRUE;
+
+ if((chan->AhciLastIS == ATA_AHCI_P_IX_INF) &&
+ !(statusByte & IDE_STATUS_ERROR) &&
+ !chan->AhciLastSError &&
+ srb && (srb->SrbFlags & SRB_FLAGS_DATA_IN)
+ ) {
+ KdPrint3((PRINT_PREFIX "ATA_AHCI_P_IX_INF on READ, assume
underflow\n"));
+ // continue processing in regular way
+ } else {
+
+ //KdPrint3((PRINT_PREFIX "Err mask (%#x)\n",
chan->AhciLastIS & ~ATA_AHCI_P_IX_OF));
+ // We have some other error except Overflow
+ // Just signal ERROR, operation will be aborted in ERROR branch.
+ statusByte |= IDE_STATUS_ERROR;
+ AtaReq->ahci.in_serror = chan->AhciLastSError;
+ if(chan->AhciLastSError & (ATA_SE_HANDSHAKE_ERR |
ATA_SE_LINKSEQ_ERR | ATA_SE_TRANSPORT_ERR | ATA_SE_UNKNOWN_FIS)) {
+ KdPrint2((PRINT_PREFIX "Unrecoverable\n"));
+ NoRetry = TRUE;
+ }
}
} else {
// We have only Overflow. Abort operation and continue
@@ -6896,13 +6911,23 @@ IdeReadWrite(
AtaReq->TransferLength = Srb->DataTransferLength;
// Set up 1st block.
switch(Srb->Cdb[0]) {
- case SCSIOP_READ:
case SCSIOP_WRITE:
+ if(LunExt->DeviceFlags & DFLAGS_LBA32plus) {
+ KdPrint2((PRINT_PREFIX "Attention: SCSIOP_WRITE on 2TB\n"));
+ //return SRB_STATUS_ERROR;
+ }
+ // FALLTHROUGH
+ case SCSIOP_READ:
MOV_DD_SWP(startingSector, ((PCDB)Srb->Cdb)->CDB10.LBA);
MOV_SWP_DW2DD(AtaReq->bcount,
((PCDB)Srb->Cdb)->CDB10.TransferBlocks);
break;
- case SCSIOP_READ12:
case SCSIOP_WRITE12:
+ if(LunExt->DeviceFlags & DFLAGS_LBA32plus) {
+ KdPrint2((PRINT_PREFIX "Attention: SCSIOP_WRITE12 on
2TB\n"));
+ //return SRB_STATUS_ERROR;
+ }
+ // FALLTHROUGH
+ case SCSIOP_READ12:
MOV_DD_SWP(startingSector, ((PCDB)Srb->Cdb)->CDB12READWRITE.LBA);
MOV_DD_SWP(AtaReq->bcount,
((PCDB)Srb->Cdb)->CDB12READWRITE.NumOfBlocks);
break;
@@ -10374,7 +10399,7 @@ UniataInitAtaCommands()
case IDE_COMMAND_WRITE_LOG_DMA48:
case IDE_COMMAND_TRUSTED_RCV_DMA:
case IDE_COMMAND_TRUSTED_SEND_DMA:
- case IDE_COMMAND_DATA_SET_MGMT:
+ case IDE_COMMAND_DATA_SET_MGMT: // TRIM
//KdPrint2((PRINT_PREFIX "DMA "));
flags |= ATA_CMD_FLAG_DMA;
}
diff --git a/drivers/storage/ide/uniata/id_dma.cpp
b/drivers/storage/ide/uniata/id_dma.cpp
index 9ce765552b..309e9040fa 100644
--- a/drivers/storage/ide/uniata/id_dma.cpp
+++ b/drivers/storage/ide/uniata/id_dma.cpp
@@ -293,11 +293,7 @@ AtapiDmaSetup(
return FALSE;
}
//KdPrint2((PRINT_PREFIX " checkpoint 3\n" ));
-#ifdef __REACTOS__
if((ULONG_PTR)data & deviceExtension->AlignmentMask) {
-#else
- if((ULONG)data & deviceExtension->AlignmentMask) {
-#endif
KdPrint2((PRINT_PREFIX "AtapiDmaSetup: unaligned data: %#x (%#x)\n",
data, deviceExtension->AlignmentMask));
return FALSE;
}
@@ -345,11 +341,7 @@ retry_DB_IO:
return FALSE;
}
-#ifdef __REACTOS__
dma_count = min(count, (PAGE_SIZE - ((ULONG_PTR)data & PAGE_MASK)));
-#else
- dma_count = min(count, (PAGE_SIZE - ((ULONG)data & PAGE_MASK)));
-#endif
data += dma_count;
count -= dma_count;
i = 0;
@@ -444,11 +436,7 @@ retry_DB_IO:
*((PULONG)&(AtaReq->ahci.ahci_cmd_ptr->prd_tab[i].DBC_ULONG)) =
((dma_count-1) & 0x3fffff);
//AtaReq->ahci.ahci_cmd_ptr->prd_tab[i].I = 1; // interrupt when
ready
KdPrint2((PRINT_PREFIX " ph data[%d]=%x:%x (%x)\n", i, dma_baseu,
dma_base, AtaReq->ahci.ahci_cmd_ptr->prd_tab[i].DBC));
-#ifdef __REACTOS__
if(((ULONG_PTR)&(AtaReq->ahci.ahci_cmd_ptr->prd_tab) & ~PAGE_MASK)
!= ((ULONG_PTR)&(AtaReq->ahci.ahci_cmd_ptr->prd_tab[i]) & ~PAGE_MASK)) {
-#else
- if(((ULONG)&(AtaReq->ahci.ahci_cmd_ptr->prd_tab) & ~PAGE_MASK) !=
((ULONG)&(AtaReq->ahci.ahci_cmd_ptr->prd_tab[i]) & ~PAGE_MASK)) {
-#endif
KdPrint2((PRINT_PREFIX "PRD table crosses page boundary! %x vs
%x\n",
&AtaReq->ahci.ahci_cmd_ptr->prd_tab,
&(AtaReq->ahci.ahci_cmd_ptr->prd_tab[i]) ));
//AtaReq->Flags |= REQ_FLAG_DMA_DBUF_PRD;
@@ -456,11 +444,7 @@ retry_DB_IO:
} else {
AtaReq->dma_tab[i].base = dma_base;
AtaReq->dma_tab[i].count = (dma_count & 0xffff) | ATA_DMA_EOT;
-#ifdef __REACTOS__
if(((ULONG_PTR)&(AtaReq->dma_tab) & ~PAGE_MASK) !=
((ULONG_PTR)&(AtaReq->dma_tab[i]) & ~PAGE_MASK)) {
-#else
- if(((ULONG)&(AtaReq->dma_tab) & ~PAGE_MASK) !=
((ULONG)&(AtaReq->dma_tab[i]) & ~PAGE_MASK)) {
-#endif
KdPrint2((PRINT_PREFIX "DMA table crosses page boundary! %x vs
%x\n",
&AtaReq->dma_tab, &(AtaReq->dma_tab[i]) ));
//AtaReq->Flags |= REQ_FLAG_DMA_DBUF_PRD;
@@ -2276,10 +2260,13 @@ setup_drive_ite:
UCHAR reg40;
GetPciConfig1(0x40, reg40);
+ /*
+ This is done on chip-init phase
if(reg40 & 0x08) {
// 80-pin check
udmamode = min(udmamode, 2);
}
+ */
/* Nothing to do to setup mode, the controller snoop SET_FEATURE cmd. */
if(apiomode >= 4)
apiomode = 4;
diff --git a/drivers/storage/ide/uniata/id_init.cpp
b/drivers/storage/ide/uniata/id_init.cpp
index f27ddc3a2a..2eaa98e696 100644
--- a/drivers/storage/ide/uniata/id_init.cpp
+++ b/drivers/storage/ide/uniata/id_init.cpp
@@ -1,6 +1,6 @@
/*++
-Copyright (c) 2004-2016 Alexandr A. Telyatnikov (Alter)
+Copyright (c) 2004-2018 Alexandr A. Telyatnikov (Alter)
Module Name:
id_init.cpp
@@ -279,19 +279,26 @@ UniataChipDetectChannels(
}
break;
#endif // this code is removed from newer FreeBSD
+#if 0
case ATA_JMICRON_ID:
/* New JMicron PATA controllers */
if(deviceExtension->DevID == ATA_JMB361 ||
deviceExtension->DevID == ATA_JMB363 ||
+ deviceExtension->DevID == ATA_JMB365 ||
+ deviceExtension->DevID == ATA_JMB366 ||
deviceExtension->DevID == ATA_JMB368) {
- if(BMList[deviceExtension->DevIndex].channel) {
- KdPrint2((PRINT_PREFIX "New JMicron has no 2nd chan\n"));
- return FALSE;
- }
- deviceExtension->NumberChannels = 1;
- KdPrint2((PRINT_PREFIX "New JMicron PATA 1 chan\n"));
+
+ ULONG tmp32, port_mask;
+
+ port_mask = BMList[deviceExtension->DevIndex].channel;
+
+ GetPciConfig4(0x40, tmp32);
+
+ deviceExtension->NumberChannels = 2;
+ //KdPrint2((PRINT_PREFIX "New JMicron PATA 1 chan\n"));
}
break;
+#endif // this code is unnecessary since port mapping is implemented
case ATA_CYRIX_ID:
if(ChipType == CYRIX_OLD) {
UCHAR tmp8;
@@ -350,17 +357,10 @@ UniataChipDetect(
ULONG ChipFlags;
ULONG tmp32;
UCHAR tmp8;
-#ifdef __REACTOS__
ULONG_PTR BaseMemAddress;
ULONG_PTR BaseIoAddress1;
ULONG_PTR BaseIoAddress2;
ULONG_PTR BaseIoAddressBM;
-#else
- ULONG BaseMemAddress;
- ULONG BaseIoAddress1;
- ULONG BaseIoAddress2;
- ULONG BaseIoAddressBM;
-#endif
BOOLEAN MemIo = FALSE;
BOOLEAN IsPata = FALSE;
@@ -1210,11 +1210,7 @@ for_ugly_chips:
tmp8 = AtapiReadPortEx1(NULL,
(ULONGIO_PTR)(&deviceExtension->BaseIoAddressBM_0),IDX_BM_Status);
KdPrint2((PRINT_PREFIX "BM status: %x\n", tmp8));
/* cleanup */
-#ifdef __REACTOS__
ScsiPortFreeDeviceBase(HwDeviceExtension,
(PCHAR)(ULONG_PTR)BaseIoAddressBM);
-#else
- ScsiPortFreeDeviceBase(HwDeviceExtension, (PCHAR)BaseIoAddressBM);
-#endif
UniataInitIoResEx(&deviceExtension->BaseIoAddressBM_0, 0, 0,
FALSE);
if(tmp8 == 0xff) {
@@ -1334,7 +1330,7 @@ for_ugly_chips:
}
break;
case ATA_JMICRON_ID:
- /* New JMicron PATA controllers */
+ /* New JMicron PATA/SATA controllers */
GetPciConfig1(0xdf, tmp8);
if(tmp8 & 0x40) {
KdPrint((" Check JMicron AHCI\n"));
@@ -1342,13 +1338,16 @@ for_ugly_chips:
ChipFlags |= UNIATA_AHCI;
deviceExtension->HwFlags |= UNIATA_AHCI;
} else {
- KdPrint((" JMicron PATA\n"));
+ KdPrint((" JMicron PATA/SATA\n"));
}
} else {
+#if 0 // do not touch, see Linux sources
/* set controller configuration to a combined setup we support */
SetPciConfig4(0x40, 0x80c0a131);
SetPciConfig4(0x80, 0x01200000);
- //KdPrint((" JMicron Combined (not supported yet)\n"));
+#endif
+ //GetPciConfig1(0x40, tmp32);
+ KdPrint((" JMicron Combined\n"));
//return STATUS_NOT_FOUND;
}
break;
@@ -2648,6 +2647,85 @@ AtapiChipInit(
}
}
break;
+ case ATA_JMICRON_ID:
+ /* New JMicron PATA controllers */
+ if(deviceExtension->DevID == ATA_JMB361 ||
+ deviceExtension->DevID == ATA_JMB363 ||
+ deviceExtension->DevID == ATA_JMB365 ||
+ deviceExtension->DevID == ATA_JMB366 ||
+ deviceExtension->DevID == ATA_JMB368) {
+ KdPrint2((PRINT_PREFIX "JMicron\n"));
+
+ ULONG c_swp = 0;
+ ULONG reg40, reg80;
+
+ GetPciConfig4(0x40, reg40);
+ KdPrint2((PRINT_PREFIX "reg 40: %x\n", reg40));
+
+ c_swp = (reg40 & (1<<22)) ? 1 : 0; // 1=swap, 0=keep
+ KdPrint2((PRINT_PREFIX "c_swp: %x\n", c_swp));
+
+ GetPciConfig4(0x80, reg80);
+ KdPrint2((PRINT_PREFIX "reg 80: %x\n", reg80));
+
+ if(c == CHAN_NOT_SPECIFIED) {
+ UCHAR P1mode;
+
+ P1mode = (reg80 & (1<<24)) ? ATA_UDMA6 : ATA_SA300;
+ KdPrint2((PRINT_PREFIX "p1 mode: %x\n", P1mode));
+
+ if(reg40 & (1 << 23)) {
+ KdPrint2((PRINT_PREFIX "SATA+PATA0\n"));
+ deviceExtension->chan[0 ^ c_swp].MaxTransferMode = P1mode;
+ deviceExtension->chan[1 ^ c_swp].MaxTransferMode = ATA_UDMA6;
+ deviceExtension->chan[1 ^ c_swp].ChannelCtrlFlags |=
CTRFLAGS_NO_SLAVE;
+
+ } else {
+ KdPrint2((PRINT_PREFIX "SATA+SATA\n"));
+ deviceExtension->chan[0 ^ c_swp].MaxTransferMode = P1mode;
+ //deviceExtension->chan[0 ^ c_swp].ChannelCtrlFlags |=
CTRFLAGS_NO_SLAVE;
+ deviceExtension->chan[1 ^ c_swp].MaxTransferMode = ATA_SA300;
+ deviceExtension->chan[1 ^ c_swp].ChannelCtrlFlags |=
CTRFLAGS_NO_SLAVE;
+ }
+
+ } else {
+ /*
+ deviceExtension->chan[0 ^ c_swp].lun[0]->SATA_lun_map =
+ deviceExtension->chan[0 ^ c_swp].lun[0]->SATA_lun_map = 0;
+ deviceExtension->chan[1 ^ c_swp].lun[0]->SATA_lun_map =
+ deviceExtension->chan[1 ^ c_swp].lun[0]->SATA_lun_map = 1;
+ */
+ KdPrint2((PRINT_PREFIX "chan %d\n", c));
+ chan = &deviceExtension->chan[c];
+
+ UCHAR ph_channel = (UCHAR)(c ^ c_swp);
+ //c_swp = chan->lun[0]->SATA_lun_map;
+ if(chan->MaxTransferMode >= ATA_SA150) {
+ KdPrint2((PRINT_PREFIX "SATA, map -> %x\n",
ph_channel));
+ } else {
+ KdPrint2((PRINT_PREFIX "PATA, map -> %x\n",
ph_channel));
+ if(!ph_channel) {
+ if(!(reg40 & (1<<5))) {
+ KdPrint2((PRINT_PREFIX "disabled\n", ph_channel));
+ } else
+ if(!(reg40 & (1<<3))) {
+ KdPrint2((PRINT_PREFIX "40-pin\n"));
+ chan->MaxTransferMode =
min(deviceExtension->MaxTransferMode, ATA_UDMA2);
+ }
+ } else {
+ if(!(reg80 & (1<<21))) {
+ KdPrint2((PRINT_PREFIX "disabled\n", ph_channel));
+ } else
+ if(!(reg80 & (1<<19))) {
+ KdPrint2((PRINT_PREFIX "40-pin\n"));
+ chan->MaxTransferMode =
min(deviceExtension->MaxTransferMode, ATA_UDMA2);
+ }
+ }
+ }
+ }
+
+ }
+ break;
default:
if(c != CHAN_NOT_SPECIFIED) {
// We don't know how to check for 80-pin cable on unknown controllers.
@@ -2661,7 +2739,8 @@ AtapiChipInit(
// In all places separate channels are inited after common controller init
// The only exception is probe. But there we may need info about 40/80 pin and
MaxTransferRate
- if(CheckCable && !(ChipFlags & (UNIATA_NO80CHK | UNIATA_SATA))) {
+ // Do not check UNIATA_SATA here since we may have controller with mixed ports
+ if(CheckCable && !(ChipFlags & (UNIATA_NO80CHK/* | UNIATA_SATA*/))) {
for(c=0; c<deviceExtension->NumberChannels; c++) {
AtapiChipInit(HwDeviceExtension, DeviceNumber, c);
}
diff --git a/drivers/storage/ide/uniata/id_probe.cpp
b/drivers/storage/ide/uniata/id_probe.cpp
index 57c0aa2eb4..0a36684d7f 100644
--- a/drivers/storage/ide/uniata/id_probe.cpp
+++ b/drivers/storage/ide/uniata/id_probe.cpp
@@ -149,7 +149,7 @@ UniataEnableIoPCI(
Get PCI address by ConfigInfo and RID
*/
#ifdef __REACTOS__
-ULONG_PTR
+ULONGIO_PTR
#else
ULONG
#endif
@@ -936,7 +936,7 @@ UniataFindCompatBusMasterController1(
{
return UniataFindBusMasterController(
HwDeviceExtension,
- (PVOID)0x00000000,
+ UlongToPtr(0x00000000),
BusInformation,
ArgumentString,
ConfigInfo,
@@ -957,11 +957,7 @@ UniataFindCompatBusMasterController2(
{
return UniataFindBusMasterController(
HwDeviceExtension,
-#ifdef __REACTOS__
UlongToPtr(0x80000000),
-#else
- (PVOID)0x80000000,
-#endif
BusInformation,
ArgumentString,
ConfigInfo,
@@ -1079,11 +1075,7 @@ UniataFindBusMasterController(
KdPrint2((PRINT_PREFIX "AdapterInterfaceType: Isa\n"));
}
if(InDriverEntry) {
-#ifdef __REACTOS__
i = PtrToUlong(Context);
-#else
- i = (ULONG)Context;
-#endif
if(i & 0x80000000) {
AltInit = TRUE;
}
@@ -1099,11 +1091,7 @@ UniataFindBusMasterController(
}
if(i >= BMListLen) {
KdPrint2((PRINT_PREFIX "unexpected device arrival\n"));
-#ifdef __REACTOS__
i = PtrToUlong(Context);
-#else
- i = (ULONG)Context;
-#endif
if(FirstMasterOk) {
channel = 1;
}
@@ -2565,22 +2553,14 @@ retryIdentifier:
if(BaseIoAddress2) {
if(hasPCI) {
-#ifdef __REACTOS__
(*ConfigInfo->AccessRanges)[1].RangeStart =
ScsiPortConvertUlongToPhysicalAddress((ULONG_PTR)BaseIoAddress2);
-#else
- (*ConfigInfo->AccessRanges)[1].RangeStart =
ScsiPortConvertUlongToPhysicalAddress((ULONG)BaseIoAddress2);
-#endif
(*ConfigInfo->AccessRanges)[1].RangeLength = ATA_ALTIOSIZE;
(*ConfigInfo->AccessRanges)[1].RangeInMemory = FALSE;
} else {
// NT4 and NT3.51 on ISA-only hardware definitly fail floppy.sys
load
// when this range is claimed by other driver.
// However, floppy should use only 0x3f0-3f5,3f7
-#ifdef __REACTOS__
- if((ULONG_PTR)BaseIoAddress2 >= 0x3f0 &&
(ULONG_PTR)BaseIoAddress2 <= 0x3f7) {
-#else
- if((ULONG)BaseIoAddress2 >= 0x3f0 && (ULONG)BaseIoAddress2
<= 0x3f7) {
-#endif
+ if((ULONGIO_PTR)BaseIoAddress2 >= 0x3f0 &&
(ULONGIO_PTR)BaseIoAddress2 <= 0x3f7) {
KdPrint2((PRINT_PREFIX "!!! Possible AltStatus vs Floppy IO
range interference !!!\n"));
}
KdPrint2((PRINT_PREFIX "Do not expose to OS on old
ISA\n"));
diff --git a/drivers/storage/ide/uniata/id_sata.cpp
b/drivers/storage/ide/uniata/id_sata.cpp
index 25fa089ea8..c39b0a83fa 100644
--- a/drivers/storage/ide/uniata/id_sata.cpp
+++ b/drivers/storage/ide/uniata/id_sata.cpp
@@ -903,11 +903,7 @@ UniataAhciDetect(
ULONG v_Mn, v_Mj;
#endif //_DEBUG
ULONG NumberChannels;
-#ifdef __REACTOS__
ULONG_PTR BaseMemAddress;
-#else
- ULONG BaseMemAddress;
-#endif
BOOLEAN MemIo = FALSE;
BOOLEAN found = FALSE;
diff --git a/drivers/storage/ide/uniata/uniata_ver.h
b/drivers/storage/ide/uniata/uniata_ver.h
index 2a6ad98c70..2dc11c5d90 100644
--- a/drivers/storage/ide/uniata/uniata_ver.h
+++ b/drivers/storage/ide/uniata/uniata_ver.h
@@ -1,10 +1,10 @@
-#define UNIATA_VER_STR "46e5"
-#define UNIATA_VER_DOT 0.46.5.5
+#define UNIATA_VER_STR "46e8"
+#define UNIATA_VER_DOT 0.46.5.8
#define UNIATA_VER_MJ 0
#define UNIATA_VER_MN 46
#define UNIATA_VER_SUB_MJ 5
-#define UNIATA_VER_SUB_MN 5
-#define UNIATA_VER_DOT_COMMA 0,46,5,5
-#define UNIATA_VER_DOT_STR "0.46.5.5"
-#define UNIATA_VER_YEAR 2017
-#define UNIATA_VER_YEAR_STR "2017"
+#define UNIATA_VER_SUB_MN 8
+#define UNIATA_VER_DOT_COMMA 0,46,5,8
+#define UNIATA_VER_DOT_STR "0.46.5.8"
+#define UNIATA_VER_YEAR 2019
+#define UNIATA_VER_YEAR_STR "2019"
2114
days inactive
2114
days old
0 comments
1 participants
participants (1)
-
Thomas Faber