Author: dreimer Date: Fri Nov 28 03:02:24 2008 New Revision: 37700
URL: http://svn.reactos.org/svn/reactos?rev=37700&view=rev Log: Update UniATA to Version 0.39j Credits go to Samuel Serapion
Modified: trunk/reactos/drivers/storage/ide/uniata/atapi.h trunk/reactos/drivers/storage/ide/uniata/bm_devs.h trunk/reactos/drivers/storage/ide/uniata/bsmaster.h trunk/reactos/drivers/storage/ide/uniata/id_ata.cpp trunk/reactos/drivers/storage/ide/uniata/id_dma.cpp trunk/reactos/drivers/storage/ide/uniata/id_init.cpp trunk/reactos/drivers/storage/ide/uniata/id_probe.cpp trunk/reactos/drivers/storage/ide/uniata/id_sata.cpp trunk/reactos/drivers/storage/ide/uniata/idedma.rc trunk/reactos/drivers/storage/ide/uniata/inc/CrossNt.h trunk/reactos/drivers/storage/ide/uniata/ntddk_ex.h trunk/reactos/drivers/storage/ide/uniata/uniata.rbuild trunk/reactos/drivers/storage/ide/uniata/uniata_ver.h
Modified: trunk/reactos/drivers/storage/ide/uniata/atapi.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/atapi.h [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/atapi.h [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -137,10 +137,6 @@ #endif // _DBGNT_
#else // _DEBUG - -#ifdef KdPrint -#undef KdPrint -#endif
#define PRINT_PREFIX "UniATA: "
@@ -944,6 +940,30 @@ ULONG DeviceNumber );
+/*#define IdeHardReset(BaseIoAddress,result) \ +{\ + UCHAR statusByte;\ + ULONG i;\ + SelectDrive(BaseIoAddress,DeviceNumber); \ + AtapiWritePort1(&BaseIoAddress->AltStatus,IDE_DC_DISABLE_INTERRUPTS | IDE_DC_RESET_CONTROLLER );\ + ScsiPortStallExecution(50 * 1000);\ + AtapiWritePort1(&BaseIoAddress->AltStatus,IDE_DC_REENABLE_CONTROLLER);\ + 5 seconds for reset \ + for (i = 0; i < 1000 * (1+11); i++) {\ + statusByte = AtapiReadPort1(&BaseIoAddress->AltStatus);\ + if (statusByte != IDE_STATUS_IDLE && statusByte != IDE_STATUS_SUCCESS) {\ + ScsiPortStallExecution((i<1000) ? 5 : 500);\ + } else {\ + break;\ + }\ + }\ + KdPrint2((PRINT_PREFIX "IdeHardReset: Status %x\n", statusByte)); \ + if (i == 1000*1000) {\ + result = FALSE;\ + }\ + result = TRUE;\ +}*/ + #endif //USER_MODE
#define IS_RDP(OperationCode)\ @@ -1129,7 +1149,7 @@ IN UCHAR command, IN USHORT cylinder, IN UCHAR head, - IN UCHAR sector, + IN UCHAR sector, IN UCHAR count, IN UCHAR feature, IN ULONG flags @@ -1152,8 +1172,7 @@ IN PVOID SystemArgument2 );
- -//#define AtaCommand(de, devn, chan, cmd, cyl, hd, sec, cnt, feat, flg) +//#define AtaCommand(de, devn, chan, cmd, cyl, hd, sec, cnt, feat, flg)
extern LONG AtaPio2Mode(LONG pio);
Modified: trunk/reactos/drivers/storage/ide/uniata/bm_devs.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/bm_devs.h [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/bm_devs.h [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -132,6 +132,7 @@ #define ATA_AMD766 0x74111022 #define ATA_AMD768 0x74411022 #define ATA_AMD8111 0x74691022 +#define ATA_AMD5536 0x209a1022
#define ATA_ACER_LABS_ID 0x10b9 #define ATA_ALI_1533 0x153310b9 @@ -144,10 +145,17 @@ #define ATA_ATI_ID 0x1002 #define ATA_ATI_IXP200 0x43491002 #define ATA_ATI_IXP300 0x43691002 +#define ATA_ATI_IXP300_S1 0x436e1002 #define ATA_ATI_IXP400 0x43761002 -#define ATA_ATI_IXP300_S1 0x436e1002 #define ATA_ATI_IXP400_S1 0x43791002 #define ATA_ATI_IXP400_S2 0x437a1002 +#define ATA_ATI_IXP600 0x438c1002 +#define ATA_ATI_IXP600_S1 0x43801002 +#define ATA_ATI_IXP700 0x439c1002 +#define ATA_ATI_IXP700_S1 0x43901002 + +#define ATA_CENATEK_ID 0x16ca +#define ATA_CENATEK_ROCKET 0x000116ca
#define ATA_CYRIX_ID 0x1078 #define ATA_CYRIX_5530 0x01021078 @@ -187,6 +195,11 @@ #define ATA_I6300ESB 0x25a28086 #define ATA_I6300ESB_1 0x25a38086 #define ATA_I6300ESB_2 0x25b08086 +#define ATA_I63XXESB2 0x269e8086 +#define ATA_I63XXESB2_S1 0x26808086 +#define ATA_I63XXESB2_S2 0x26818086 +#define ATA_I63XXESB2_R1 0x26828086 +#define ATA_I63XXESB2_R2 0x26838086 #define ATA_I82801FB 0x266f8086 #define ATA_I82801FB_S1 0x26518086 #define ATA_I82801FB_R1 0x26528086 @@ -197,6 +210,20 @@ #define ATA_I82801GB_AH 0x27c18086 #define ATA_I82801GB_M 0x27c58086
+#define ATA_MARVELL_ID 0x11ab +#define ATA_M88SX5040 0x504011ab +#define ATA_M88SX5041 0x504111ab +#define ATA_M88SX5080 0x508011ab +#define ATA_M88SX5081 0x508111ab +#define ATA_M88SX6041 0x604111ab +#define ATA_M88SX6081 0x608111ab +#define ATA_M88SX6101 0x610111ab +#define ATA_M88SX6145 0x614511ab + +#define ATA_MICRON_ID 0x1042 +#define ATA_MICRON_RZ1000 0x10001042 +#define ATA_MICRON_RZ1001 0x10011042 + #define ATA_NATIONAL_ID 0x100b #define ATA_SC1100 0x0502100b
@@ -206,17 +233,32 @@ #define ATA_NVIDIA_ID 0x10de #define ATA_NFORCE1 0x01bc10de #define ATA_NFORCE2 0x006510de -#define ATA_NFORCE2_MCP 0x008510de +#define ATA_NFORCE2_PRO 0x008510de +#define ATA_NFORCE2_PRO_S1 0x008e10de #define ATA_NFORCE3 0x00d510de #define ATA_NFORCE3_PRO 0x00e510de #define ATA_NFORCE3_PRO_S1 0x00e310de #define ATA_NFORCE3_PRO_S2 0x00ee10de -#define ATA_NFORCE3_MCP 0x003510de -#define ATA_NFORCE3_MCP_S1 0x003610de -#define ATA_NFORCE3_MCP_S2 0x003e10de -#define ATA_NFORCE4 0x005310de -#define ATA_NFORCE4_S1 0x005410de -#define ATA_NFORCE4_S2 0x005510de +#define ATA_NFORCE_MCP04 0x003510de +#define ATA_NFORCE_MCP04_S1 0x003610de +#define ATA_NFORCE_MCP04_S2 0x003e10de +#define ATA_NFORCE_CK804 0x005310de +#define ATA_NFORCE_CK804_S1 0x005410de +#define ATA_NFORCE_CK804_S2 0x005510de +#define ATA_NFORCE_MCP51 0x026510de +#define ATA_NFORCE_MCP51_S1 0x026610de +#define ATA_NFORCE_MCP51_S2 0x026710de +#define ATA_NFORCE_MCP55 0x036e10de +#define ATA_NFORCE_MCP55_S1 0x037e10de +#define ATA_NFORCE_MCP55_S2 0x037f10de +#define ATA_NFORCE_MCP61 0x03ec10de +#define ATA_NFORCE_MCP61_S1 0x03e710de +#define ATA_NFORCE_MCP61_S2 0x03f610de +#define ATA_NFORCE_MCP61_S3 0x03f710de +#define ATA_NFORCE_MCP65 0x044810de +#define ATA_NFORCE_MCP67 0x056010de +#define ATA_NFORCE_MCP73 0x056c10de +#define ATA_NFORCE_MCP77 0x075910de
#define ATA_PROMISE_ID 0x105a #define ATA_PDC20246 0x4d33105a @@ -326,6 +368,8 @@ #define ATA_VIA8233C 0x31091106 #define ATA_VIA8235 0x31771106 #define ATA_VIA8237 0x32271106 +#define ATA_VIA8237A 0x05911106 +#define ATA_VIA8237S 0x53371106 #define ATA_VIA8251 0x33491106 #define ATA_VIA8361 0x31121106 #define ATA_VIA8363 0x03051106 @@ -466,13 +510,18 @@ PCI_DEV_HW_SPEC_BM( 7411, 1022, 0x00, ATA_UDMA5, "AMD 766" , AMDNVIDIA | AMDBUG ), PCI_DEV_HW_SPEC_BM( 7441, 1022, 0x00, ATA_UDMA5, "AMD 768" , AMDNVIDIA ), PCI_DEV_HW_SPEC_BM( 7469, 1022, 0x00, ATA_UDMA6, "AMD 8111" , AMDNVIDIA ), + PCI_DEV_HW_SPEC_BM( 209a, 1022, 0x00, ATA_UDMA5, "AMD CS5536" , AMDNVIDIA ),
PCI_DEV_HW_SPEC_BM( 4349, 1002, 0x00, ATA_UDMA5, "ATI IXP200" , 0 ), PCI_DEV_HW_SPEC_BM( 4369, 1002, 0x00, ATA_UDMA6, "ATI IXP300" , 0 ), PCI_DEV_HW_SPEC_BM( 4376, 1002, 0x00, ATA_UDMA6, "ATI IXP400" , 0 ), PCI_DEV_HW_SPEC_BM( 436e, 1002, 0x00, ATA_SA150, "ATI IXP300" , SIIMIO | UNIATA_SATA ), PCI_DEV_HW_SPEC_BM( 4379, 1002, 0x00, ATA_SA150, "ATI IXP400" , SIIMIO | SIINOSATAIRQ | UNIATA_SATA ), - PCI_DEV_HW_SPEC_BM( 437a, 1002, 0x00, ATA_SA150, "ATI IXP400" , SIIMIO | SIINOSATAIRQ | UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 437a, 1002, 0x00, ATA_SA300, "ATI IXP400" , SIIMIO | SIINOSATAIRQ | UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 438c, 1002, 0x00, ATA_UDMA6, "ATI IXP600" , 0 ), + PCI_DEV_HW_SPEC_BM( 4380, 1002, 0x00, ATA_SA150, "ATI IXP600" , UNIATA_SATA | UNIATA_AHCI ), + PCI_DEV_HW_SPEC_BM( 439c, 1002, 0x00, ATA_UDMA6, "ATI IXP700" , 0 ), + PCI_DEV_HW_SPEC_BM( 4390, 1002, 0x00, ATA_SA150, "ATI IXP700" , UNIATA_SATA | UNIATA_AHCI ),
PCI_DEV_HW_SPEC_BM( 0004, 1103, 0x05, ATA_UDMA6, "HighPoint HPT372" , HPT372 | 0x00 | UNIATA_RAID_CONTROLLER), PCI_DEV_HW_SPEC_BM( 0004, 1103, 0x03, ATA_UDMA5, "HighPoint HPT370" , HPT370 | 0x00 | UNIATA_RAID_CONTROLLER), @@ -525,13 +574,24 @@ PCI_DEV_HW_SPEC_BM( 2822, 8086, 0x00, ATA_SA300, "Intel ICH8" , UNIATA_SATA | UNIATA_AHCI ), PCI_DEV_HW_SPEC_BM( 2824, 8086, 0x00, ATA_SA300, "Intel ICH8" , UNIATA_SATA | UNIATA_AHCI ), PCI_DEV_HW_SPEC_BM( 2825, 8086, 0x00, ATA_SA300, "Intel ICH8" , UNIATA_SATA | UNIATA_AHCI ), +// PCI_DEV_HW_SPEC_BM( 2828, 8086, 0x00, ATA_SA300, "Intel ICH8M" , UNIATA_SATA | UNIATA_AHCI ), PCI_DEV_HW_SPEC_BM( 2829, 8086, 0x00, ATA_SA300, "Intel ICH8M" , UNIATA_SATA | UNIATA_AHCI ), PCI_DEV_HW_SPEC_BM( 282a, 8086, 0x00, ATA_SA300, "Intel ICH8M" , UNIATA_SATA | UNIATA_AHCI ), +// PCI_DEV_HW_SPEC_BM( 2850, 8086, 0x00, ATA_SA300, "Intel ICH8M" , UNIATA_SATA ), PCI_DEV_HW_SPEC_BM( 2920, 8086, 0x00, ATA_SA300, "Intel ICH9" , UNIATA_SATA | UNIATA_AHCI ), PCI_DEV_HW_SPEC_BM( 2926, 8086, 0x00, ATA_SA300, "Intel ICH9" , UNIATA_SATA | UNIATA_AHCI ), PCI_DEV_HW_SPEC_BM( 2923, 8086, 0x00, ATA_SA300, "Intel ICH9" , UNIATA_SATA | UNIATA_AHCI ), PCI_DEV_HW_SPEC_BM( 2922, 8086, 0x00, ATA_SA300, "Intel ICH9" , UNIATA_SATA | UNIATA_AHCI ), // PCI_DEV_HW_SPEC_BM( 3200, 8086, 0x00, ATA_SA150, "Intel 31244" , UNIATA_SATA ), +/* + PCI_DEV_HW_SPEC_BM( 5040, 11ab, 0x00, ATA_SA150, "Marvell 88SX5040" , UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 5041, 11ab, 0x00, ATA_SA150, "Marvell 88SX5041" , UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 5080, 11ab, 0x00, ATA_SA150, "Marvell 88SX5080" , UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 5081, 11ab, 0x00, ATA_SA150, "Marvell 88SX5081" , UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 6041, 11ab, 0x00, ATA_SA300, "Marvell 88SX6041" , UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 6081, 11ab, 0x00, ATA_SA300, "Marvell 88SX6081" , UNIATA_SATA ),*/ + PCI_DEV_HW_SPEC_BM( 6101, 11ab, 0x00, ATA_UDMA6, "Marvell 88SX6101" , 0 ), + PCI_DEV_HW_SPEC_BM( 6145, 11ab, 0x00, ATA_UDMA6, "Marvell 88SX6145" , 0 ),
PCI_DEV_HW_SPEC_BM( 01bc, 10de, 0x00, ATA_UDMA5, "nVidia nForce" , AMDNVIDIA ), PCI_DEV_HW_SPEC_BM( 0065, 10de, 0x00, ATA_UDMA6, "nVidia nForce2" , AMDNVIDIA ), @@ -553,6 +613,14 @@ PCI_DEV_HW_SPEC_BM( 036e, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP55", AMDNVIDIA ), PCI_DEV_HW_SPEC_BM( 037e, 10de, 0x00, ATA_SA300, "nVidia nForce MCP55 S1",NV4OFF | NVQ | UNIATA_SATA ), PCI_DEV_HW_SPEC_BM( 037f, 10de, 0x00, ATA_SA300, "nVidia nForce MCP55 S2",NV4OFF | NVQ | UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 03ec, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP61", AMDNVIDIA ), + PCI_DEV_HW_SPEC_BM( 03e7, 10de, 0x00, ATA_SA300, "nVidia nForce MCP61 S1",NV4OFF | NVQ | UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 03f6, 10de, 0x00, ATA_SA300, "nVidia nForce MCP61 S2",NV4OFF | NVQ | UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 03f7, 10de, 0x00, ATA_SA300, "nVidia nForce MCP61 S3",NV4OFF | NVQ | UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 0448, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP65", AMDNVIDIA ), + PCI_DEV_HW_SPEC_BM( 0560, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP67", AMDNVIDIA ), + PCI_DEV_HW_SPEC_BM( 056c, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP73", AMDNVIDIA ), + PCI_DEV_HW_SPEC_BM( 0759, 10de, 0x00, ATA_UDMA6, "nVidia nForce MCP77", AMDNVIDIA ),
PCI_DEV_HW_SPEC_BM( 0502, 100b, 0x00, ATA_UDMA2, "National Geode SC1100", 0 ),
@@ -667,11 +735,12 @@ PCI_DEV_HW_SPEC_BM( 3149, 1106, 0x00, ATA_SA150, "VIA 6420" , 0 | UNIATA_SATA ), PCI_DEV_HW_SPEC_BM( 3249, 1106, 0x00, ATA_SA150, "VIA 6421" , VIABAR | UNIATA_SATA ), PCI_DEV_HW_SPEC_BM( 0591, 1106, 0x00, ATA_SA150, "VIA 8237A" , 0 | UNIATA_SATA ), + PCI_DEV_HW_SPEC_BM( 5337, 1106, 0x00, ATA_SA150, "VIA 8237S" , 0 | UNIATA_SATA ), //PCI_DEV_HW_SPEC_BM( 3349, 1106, 0x00, ATA_SA150, "VIA 8251" , VIAAHCI| UNIATA_SATA ),
PCI_DEV_HW_SPEC_BM( c693, 1080, 0x00, ATA_WDMA2, "Cypress 82C693" ,0 ),
-/* +/* PCI_DEV_HW_SPEC_BM( 4d68, 105a, 0, 0, "Promise TX2 ATA-100 controller", UNIATA_RAID_CONTROLLER), PCI_DEV_HW_SPEC_BM( 6268, 105a, 0, 0, "Promise TX2 ATA-100 controller", UNIATA_RAID_CONTROLLER),
Modified: trunk/reactos/drivers/storage/ide/uniata/bsmaster.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/bsmaster.h [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/bsmaster.h [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -1,6 +1,6 @@ /*++
-Copyright (c) 2002-2005 Alexandr A. Telyatnikov (Alter) +Copyright (c) 2002-2008 Alexandr A. Telyatnikov (Alter)
Module Name: bsmaster.h @@ -31,7 +31,7 @@ Revision History:
Code was created by - Alter, Copyright (c) 2002-2007 + Alter, Copyright (c) 2002-2008
Some definitions were taken from FreeBSD 4.3-4.6 ATA driver by Søren Schmidt, Copyright (c) 1998,1999,2000,2001 @@ -520,6 +520,8 @@
} IDE_AHCI_PORT_REGISTERS, *PIDE_AHCI_PORT_REGISTERS;
+#define IDX_AHCI_P_CLB (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, CLB)) +#define IDX_AHCI_P_FB (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, FB)) #define IDX_AHCI_P_IS (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, IS)) #define IDX_AHCI_P_CI (FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, CI))
@@ -544,6 +546,7 @@ } IDE_AHCI_PRD_ENTRY, *PIDE_AHCI_PRD_ENTRY;
#define ATA_AHCI_DMA_ENTRIES (PAGE_SIZE/2/sizeof(IDE_AHCI_PRD_ENTRY)) /* 128 */ +#define ATA_AHCI_MAX_TAGS 32
typedef struct _IDE_AHCI_CMD { UCHAR cfis[64]; @@ -557,7 +560,21 @@ USHORT prd_length; /* PRD entries */ ULONG bytecount; ULONGLONG cmd_table_phys; /* 128byte aligned */ + ULONG Reserved[4]; } IDE_AHCI_CMD_LIST, *PIDE_AHCI_CMD_LIST; + +typedef struct _IDE_AHCI_RCV_FIS { + UCHAR dsfis[28]; + UCHAR Reserved1[4]; + UCHAR psfis[24]; + UCHAR Reserved2[8]; + UCHAR rfis[24]; + UCHAR Reserved3[4]; + ULONG SDBFIS; + UCHAR ufis[64]; + UCHAR Reserved4[96]; +} IDE_AHCI_RCV_FIS, *PIDE_AHCI_RCV_FIS; +
#define IsBusMaster(pciData) \ ( ((pciData)->Command & (PCI_ENABLE_BUS_MASTER/* | PCI_ENABLE_IO_SPACE*/)) == \ @@ -892,7 +909,7 @@ ULONG NumberChannels; ULONG NumberLuns; ULONG FirstChannelToCheck; -#if 1 +#if 0 HW_LU_EXTENSION lun[IDE_MAX_LUN]; HW_CHANNEL chan[AHCI_MAX_PORT/*IDE_MAX_CHAN*/]; #else @@ -1017,6 +1034,14 @@ OUT PBOOLEAN Again );
+#define UNIATA_ALLOCATE_NEW_LUNS 0x00 + +extern BOOLEAN +UniataAllocateLunExt( + PHW_DEVICE_EXTENSION deviceExtension, + ULONG NewNumberChannels + ); + extern ULONG DDKAPI UniataFindBusMasterController( IN PVOID HwDeviceExtension, @@ -1159,6 +1184,14 @@ );
extern PDRIVER_OBJECT SavedDriverObject; + +extern BOOLEAN +UniataChipDetectChannels( + IN PVOID HwDeviceExtension, + IN PPCI_COMMON_CONFIG pciData, // optional + IN ULONG DeviceNumber, + IN PPORT_CONFIGURATION_INFORMATION ConfigInfo + );
extern BOOLEAN UniataChipDetect(
Modified: trunk/reactos/drivers/storage/ide/uniata/id_ata.cpp URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/id_ata.cpp [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/id_ata.cpp [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -1,6 +1,6 @@ /*++
-Copyright (c) 2002-2007 Alexandr A. Telyatnikov (Alter) +Copyright (c) 2002-2008 Alexandr A. Telyatnikov (Alter)
Module Name: id_ata.cpp @@ -174,7 +174,7 @@ IN ULONG MaxLen ) { -#define ITEMS_TO_QUERY 2 // always 1 greater than what is searched +#define ITEMS_TO_QUERY 2 // always 1 greater than what is searched NTSTATUS status; RTL_QUERY_REGISTRY_TABLE parameters[ITEMS_TO_QUERY]; UNICODE_STRING ustr; @@ -4553,7 +4553,7 @@ } } else {
- KdPrint2((PRINT_PREFIX + KdPrint3((PRINT_PREFIX "AtapiInterrupt: Int reason %#x, but srb is for a write %#x.\n", interruptReason, srb)); @@ -5039,12 +5039,12 @@ CHECK_INTR_IDLE);
// Sanity check that there is a current request. - if (srb != NULL) { + if(srb != NULL) { // Set status in SRB. srb->SrbStatus = (UCHAR)status;
// Check for underflow. - if (AtaReq->WordsLeft) { + if(AtaReq->WordsLeft) {
KdPrint2((PRINT_PREFIX "AtapiInterrupt: Check for underflow, AtaReq->WordsLeft %x\n", AtaReq->WordsLeft)); // Subtract out residual words and update if filemark hit, @@ -5424,7 +5424,7 @@ (*max_bcount) = LunExt->IdentifyData.SectorsPerTrack; } else { cylinder = (USHORT)(startingSector / tmp); - drvSelect = (UCHAR)((startingSector % tmp) / LunExt->IdentifyData.SectorsPerTrack); + drvSelect = (UCHAR)((startingSector % tmp) / LunExt->IdentifyData.SectorsPerTrack); sectorNumber = (UCHAR)(startingSector % LunExt->IdentifyData.SectorsPerTrack) + 1; (*max_bcount) = LunExt->IdentifyData.SectorsPerTrack - sectorNumber + 1; KdPrint2((PRINT_PREFIX "UniAtaCalculateLBARegs: C:H:S=%#x:%#x:%#x, max_bc %#x\n", @@ -5642,7 +5642,9 @@ (USHORT)(AtaReq->bcount), // (UCHAR)((wordCount*2 + DEV_BSIZE-1) / DEV_BSIZE), 0, ATA_IMMEDIATE); - GetStatus(chan, statusByte2); + if(statusByte2 != 0xff) { + GetStatus(chan, statusByte2); + } if(statusByte2 & IDE_STATUS_ERROR) { statusByte = AtapiReadPort1(chan, IDX_IO1_i_Error); KdPrint2((PRINT_PREFIX "IdeReadWrite: status %#x, error %#x\n", statusByte2, statusByte)); @@ -5660,11 +5662,18 @@ // (UCHAR)((wordCount*2 + DEV_BSIZE-1) / DEV_BSIZE), 0, ATA_WAIT_INTR);
- if (!(statusByte & IDE_STATUS_DRQ)) { - - KdPrint2((PRINT_PREFIX - "IdeReadWrite: DRQ never asserted (%#x)\n", - statusByte)); + if (!(statusByte & IDE_STATUS_DRQ) || + statusByte == 0xff) { + + if(statusByte == 0xff) { + KdPrint2((PRINT_PREFIX + "IdeReadWrite: error sending command (%#x)\n", + statusByte)); + } else { + KdPrint2((PRINT_PREFIX + "IdeReadWrite: DRQ never asserted (%#x)\n", + statusByte)); + }
AtaReq->WordsLeft = 0;
@@ -5676,7 +5685,7 @@ // Clear current SRB. UniataRemoveRequest(chan, Srb);
- return SRB_STATUS_TIMEOUT; + return (statusByte == 0xff) ? SRB_STATUS_ERROR : SRB_STATUS_TIMEOUT; }
chan->ExpectingInterrupt = TRUE; @@ -5756,7 +5765,7 @@ LunExt->IdentifyData.NumberOfCylinders; }
- KdPrint2((PRINT_PREFIX + KdPrint2((PRINT_PREFIX "IdeVerify: Total sectors %#x\n", sectors));
@@ -5764,21 +5773,21 @@ MOV_DD_SWP(startingSector, ((PCDB)Srb->Cdb)->CDB10.LBA); MOV_DW_SWP(sectorCount, ((PCDB)Srb->Cdb)->CDB10.TransferBlocks);
- KdPrint2((PRINT_PREFIX + KdPrint2((PRINT_PREFIX "IdeVerify: Starting sector %#x. Number of blocks %#x\n", startingSector, sectorCount));
endSector = startingSector + sectorCount;
- KdPrint2((PRINT_PREFIX + KdPrint2((PRINT_PREFIX "IdeVerify: Ending sector %#x\n", endSector));
if (endSector > sectors) {
// Too big, round down. - KdPrint2((PRINT_PREFIX + KdPrint2((PRINT_PREFIX "IdeVerify: Truncating request to %#x blocks\n", sectors - startingSector - 1));
@@ -6138,19 +6147,19 @@
// Make sure command is to ATAPI device. flags = deviceExtension->lun[ldev].DeviceFlags; - if (flags & (DFLAGS_SANYO_ATAPI_CHANGER | DFLAGS_ATAPI_CHANGER)) { - if ((Srb->Lun) > (deviceExtension->lun[ldev].DiscsPresent - 1)) { + if(flags & (DFLAGS_SANYO_ATAPI_CHANGER | DFLAGS_ATAPI_CHANGER)) { + if((Srb->Lun) > (deviceExtension->lun[ldev].DiscsPresent - 1)) {
// Indicate no device found at this address. AtaReq->ReqState = REQ_STATE_TRANSFER_COMPLETE; return SRB_STATUS_SELECTION_TIMEOUT; } - } else if (Srb->Lun > 0) { + } else if(Srb->Lun > 0) { AtaReq->ReqState = REQ_STATE_TRANSFER_COMPLETE; return SRB_STATUS_SELECTION_TIMEOUT; }
- if (!(flags & DFLAGS_ATAPI_DEVICE)) { + if(!(flags & DFLAGS_ATAPI_DEVICE)) { AtaReq->ReqState = REQ_STATE_TRANSFER_COMPLETE; return SRB_STATUS_SELECTION_TIMEOUT; } @@ -6162,11 +6171,11 @@ GetStatus(chan, statusByte); KdPrint3((PRINT_PREFIX "AtapiSendCommand: Entered with status %#x\n", statusByte));
- if (statusByte == 0xff) { + if(statusByte == 0xff) { KdPrint2((PRINT_PREFIX "AtapiSendCommand: bad status 0xff on entry\n")); goto make_reset; } - if (statusByte & IDE_STATUS_BUSY) { + if(statusByte & IDE_STATUS_BUSY) { if(statusByte & IDE_STATUS_DSC) { KdPrint2((PRINT_PREFIX "AtapiSendCommand: DSC on entry (%#x), try exec\n", statusByte)); } else { @@ -6176,7 +6185,7 @@ goto make_reset; } } - if (statusByte & IDE_STATUS_ERROR) { + if(statusByte & IDE_STATUS_ERROR) { if (Srb->Cdb[0] != SCSIOP_REQUEST_SENSE) {
KdPrint3((PRINT_PREFIX "AtapiSendCommand: Error on entry: (%#x)\n", statusByte)); @@ -6189,7 +6198,7 @@ } // If a tape drive doesn't have DSC set and the last command is restrictive, don't send // the next command. See discussion of Restrictive Delayed Process commands in QIC-157. - if ((!(statusByte & IDE_STATUS_DSC)) && + if((!(statusByte & IDE_STATUS_DSC)) && (flags & (DFLAGS_TAPE_DEVICE | DFLAGS_ATAPI_DEVICE)) && chan->RDP) {
AtapiStallExecution(200); @@ -6198,13 +6207,13 @@ return SRB_STATUS_PENDING; }
- if (IS_RDP(Srb->Cdb[0])) { + if(IS_RDP(Srb->Cdb[0])) { chan->RDP = TRUE; KdPrint2((PRINT_PREFIX "AtapiSendCommand: %#x mapped as DSC restrictive\n", Srb->Cdb[0])); } else { chan->RDP = FALSE; } - if (statusByte & IDE_STATUS_DRQ) { + if(statusByte & IDE_STATUS_DRQ) {
KdPrint3((PRINT_PREFIX "AtapiSendCommand: Entered with status (%#x). Attempting to recover.\n", statusByte)); @@ -6213,7 +6222,7 @@ // in production devices. for (i = 0; i < 0x10000; i++) { GetStatus(chan, statusByte); - if (statusByte & IDE_STATUS_DRQ) { + if(statusByte & IDE_STATUS_DRQ) { AtapiReadPort2(chan, IDX_IO1_i_Data); } else { break; @@ -6259,10 +6268,10 @@ } }
- if (flags & (DFLAGS_SANYO_ATAPI_CHANGER | DFLAGS_ATAPI_CHANGER)) { + if(flags & (DFLAGS_SANYO_ATAPI_CHANGER | DFLAGS_ATAPI_CHANGER)) { // As the cdrom driver sets the LUN field in the cdb, it must be removed. Srb->Cdb[1] &= ~0xE0; - if ((Srb->Cdb[0] == SCSIOP_TEST_UNIT_READY) && (flags & DFLAGS_SANYO_ATAPI_CHANGER)) { + if((Srb->Cdb[0] == SCSIOP_TEST_UNIT_READY) && (flags & DFLAGS_SANYO_ATAPI_CHANGER)) { // Torisan changer. TUR's are overloaded to be platter switches. Srb->Cdb[7] = Srb->Lun; } @@ -6487,7 +6496,7 @@ switch (Srb->Cdb[0]) { case SCSIOP_INQUIRY:
- KdPrint2((PRINT_PREFIX + KdPrint2((PRINT_PREFIX "IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = %#x:%#x:%#x\n", Srb->PathId, Srb->Lun, Srb->TargetId)); // Filter out all TIDs but 0 and 1 since this is an IDE interface @@ -6576,7 +6585,7 @@
case SCSIOP_MODE_SENSE:
- KdPrint2((PRINT_PREFIX + KdPrint2((PRINT_PREFIX "IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = %#x:%#x:%#x\n", Srb->PathId, Srb->Lun, Srb->TargetId)); // This is used to determine if the media is write-protected. @@ -7296,7 +7305,7 @@
reject_srb: //if(!CheckDevice(HwDeviceExtension, lChannel, ldev & 1, FALSE)) { - KdPrint2((PRINT_PREFIX + KdPrint3((PRINT_PREFIX "AtapiStartIo: SRB rejected\n")); // Indicate no device found at this address. KdPrint2((PRINT_PREFIX "SRB_STATUS_SELECTION_TIMEOUT\n")); @@ -8160,9 +8169,16 @@ { int i; UCHAR command; - UCHAR flags = 0; - - for(i=0, command=0; i<256; i++, command++) { + UCHAR flags; + + KdPrint2((PRINT_PREFIX "UniataInitAtaCommands:\n")); + + for(i=0; i<256; i++) { + + flags = 0; + command = i; + + KdPrint2((PRINT_PREFIX "cmd %2.2x: ", command));
switch(command) { case IDE_COMMAND_READ_DMA48: @@ -8183,6 +8199,7 @@ case IDE_COMMAND_WRITE_LOG_DMA48: case IDE_COMMAND_TRUSTED_RCV_DMA: case IDE_COMMAND_TRUSTED_SEND_DMA: + KdPrint2((PRINT_PREFIX "DMA ")); flags |= ATA_CMD_FLAG_DMA; }
@@ -8205,6 +8222,7 @@ case IDE_COMMAND_FLUSH_CACHE48: case IDE_COMMAND_VERIFY48:
+ KdPrint2((PRINT_PREFIX "48 ")); flags |= ATA_CMD_FLAG_48; /* FALL THROUGH */
@@ -8219,6 +8237,7 @@ case IDE_COMMAND_FLUSH_CACHE: case IDE_COMMAND_VERIFY:
+ KdPrint2((PRINT_PREFIX "LBA ")); flags |= ATA_CMD_FLAG_LBAIOsupp; }
@@ -8250,9 +8269,11 @@ case IDE_COMMAND_VERIFY: command = IDE_COMMAND_VERIFY48; break; default: + KdPrint2((PRINT_PREFIX "!28->48 ")); flags &= ~ATA_CMD_FLAG_48supp; }
+ KdPrint2((PRINT_PREFIX "\t -> %2.2x (%2.2x)\n", command, flags)); AtaCommands48[i] = command; AtaCommandFlags[i] = flags; } @@ -8593,7 +8614,7 @@
/* KeBugCheckEx(0xc000000e, i, - c, + c, newStatus, statusToReturn);*/
// -------------- @@ -8924,7 +8945,7 @@ IN ULONG Default ) { -#define ITEMS_TO_QUERY 2 // always 1 greater than what is searched +#define ITEMS_TO_QUERY 2 // always 1 greater than what is searched
// PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension; NTSTATUS status; @@ -8944,7 +8965,8 @@ // KdPrint(( "AtapiCheckRegValue: RegistryPath %ws\n", RegistryPath->Buffer));
paramPath.Length = 0; - paramPath.MaximumLength = RegistryPath->Length + (wcslen(PathSuffix)+2)*sizeof(WCHAR); + paramPath.MaximumLength = RegistryPath->Length + + (wcslen(PathSuffix)+2)*sizeof(WCHAR); paramPath.Buffer = (PWCHAR)ExAllocatePool(NonPagedPool, paramPath.MaximumLength); if(!paramPath.Buffer) { KdPrint(("AtapiCheckRegValue: couldn't allocate paramPath\n")); @@ -9051,7 +9073,7 @@ status = UniataConnectIntr2(HwDeviceExtension); for (c = 0; c < numberChannels; c++) { AtapiChipInit(HwDeviceExtension, DEVNUM_NOT_SPECIFIED, c); - FindDevices(HwDeviceExtension, FALSE, c); + FindDevices(HwDeviceExtension, 0, c); AtapiEnableInterrupts(deviceExtension, c); AtapiHwInitialize__(deviceExtension, c); }
Modified: trunk/reactos/drivers/storage/ide/uniata/id_dma.cpp URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/id_dma.cpp [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/id_dma.cpp [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -1,6 +1,6 @@ /*++
-Copyright (c) 2002-2007 Alexander A. Telyatnikov (Alter) +Copyright (c) 2002-2008 Alexander A. Telyatnikov (Alter)
Module Name: id_dma.cpp @@ -31,7 +31,7 @@ Revision History:
This module is a port from FreeBSD 4.3-6.1 ATA driver (ata-dma.c, ata-chipset.c) by - Søren Schmidt, Copyright (c) 1998-2007 + Søren Schmidt, Copyright (c) 1998-2008
Changed defaulting-to-generic-PIO/DMA policy Added PIO settings for VIA @@ -176,24 +176,30 @@ } } #endif //USE_OWN_DMA -/* + if(deviceExtension->HwFlags & UNIATA_AHCI) { - chan->AHCI_CLP = MmAllocateContiguousMemory(sizeof(((PATA_REQ)NULL)->dma_tab), ph4gb); - if(chan->AHCI_CLP) { - chan->DB_PRD_PhAddr = AtapiVirtToPhysAddr(HwDeviceExtension, NULL, (PUCHAR)(chan->DB_PRD), &i, &ph_addru); - if(!chan->DB_PRD_PhAddr || !i || ((LONG)(chan->DB_PRD_PhAddr) == -1)) { - KdPrint2((PRINT_PREFIX "AtapiDmaAlloc: No DB PRD BASE\n" )); - chan->DB_PRD = NULL; - chan->DB_PRD_PhAddr = 0; + if(chan->AHCI_CL) { + return; + } + chan->AHCI_CL = (PIDE_AHCI_CMD_LIST)MmAllocateContiguousMemory(sizeof(IDE_AHCI_CMD_LIST)*ATA_AHCI_MAX_TAGS+sizeof(IDE_AHCI_RCV_FIS), ph4gb); + if(chan->AHCI_CL) { + chan->AHCI_CL_PhAddr = AtapiVirtToPhysAddr(HwDeviceExtension, NULL, (PUCHAR)(chan->AHCI_CL), &i, &ph_addru); + if(!chan->AHCI_CL_PhAddr || !i || ((LONG)(chan->AHCI_CL_PhAddr) == -1)) { + KdPrint2((PRINT_PREFIX "AtapiDmaAlloc: No AHCI CLP BASE\n" )); + chan->AHCI_CL = NULL; + chan->AHCI_CL_PhAddr = 0; return; } if(ph_addru) { - KdPrint2((PRINT_PREFIX "AtapiDmaAlloc: No DB PRD below 4Gb\n" )); - goto err_1; - } - } - } -*/ + KdPrint2((PRINT_PREFIX "AtapiDmaAlloc: No AHCI CLP below 4Gb\n" )); + MmFreeContiguousMemory(chan->AHCI_CL); + chan->AHCI_CL = NULL; + chan->AHCI_CL_PhAddr = 0; + return; + } + } + } + return; } // end AtapiDmaAlloc()
@@ -708,7 +714,7 @@ IN ULONG mode ) { - KdPrint2((PRINT_PREFIX + KdPrint3((PRINT_PREFIX "AtaSetTransferMode: Set %#x on Device %d/%d\n", mode, lChannel, DeviceNumber)); LONG statusByte = 0; CHAR apiomode; @@ -887,7 +893,7 @@ AtaSetTransferMode(deviceExtension, DeviceNumber, lChannel, LunExt, ModeByte); return; } - if (udmamode > 2 && !LunExt->IdentifyData.HwResCableId) { + if(udmamode > 2 && !LunExt->IdentifyData.HwResCableId) { KdPrint2((PRINT_PREFIX "AtapiDmaInit: DMA limited to UDMA33, non-ATA66 compliant cable\n")); udmamode = 2; apiomode = min( apiomode, (CHAR)(LunExt->LimitedTransferMode - ATA_PIO)); @@ -1123,6 +1129,29 @@ } } /* Use GENERIC PIO */ + break; + case ATA_MARVELL_ID: + /***********/ + /* Marvell */ + /***********/ + for(i=udmamode; i>=0; i--) { + if(AtaSetTransferMode(deviceExtension, DeviceNumber, lChannel, LunExt, ATA_UDMA0 + i)) { + return; + } + } + for(i=wdmamode; i>=0; i--) { + if(AtaSetTransferMode(deviceExtension, DeviceNumber, lChannel, LunExt, ATA_WDMA0 + i)) { + return; + } + } + /* try generic DMA, use hpt_timing() */ + if (wdmamode >= 0 && apiomode >= 4) { + if(AtaSetTransferMode(deviceExtension, DeviceNumber, lChannel, LunExt, ATA_DMA)) { + return; + } + } + AtaSetTransferMode(deviceExtension, DeviceNumber, lChannel, LunExt, ATA_PIO0 + apiomode); + return; break; case ATA_NETCELL_ID: /***********/
Modified: trunk/reactos/drivers/storage/ide/uniata/id_init.cpp URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/id_init.cpp [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/id_init.cpp [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -1,6 +1,6 @@ /*++
-Copyright (c) 2004-2007 Alexandr A. Telyatnikov (Alter) +Copyright (c) 2004-2008 Alexandr A. Telyatnikov (Alter)
Module Name: id_init.cpp @@ -42,6 +42,102 @@ --*/
#include "stdafx.h" + +BOOLEAN +UniataChipDetectChannels( + IN PVOID HwDeviceExtension, + IN PPCI_COMMON_CONFIG pciData, // optional + IN ULONG DeviceNumber, + IN PPORT_CONFIGURATION_INFORMATION ConfigInfo + ) +{ + PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension; + ULONG slotNumber = deviceExtension->slotNumber; + ULONG SystemIoBusNumber = deviceExtension->SystemIoBusNumber; + ULONG VendorID = deviceExtension->DevID & 0xffff; + ULONG DeviceID = (deviceExtension->DevID >> 16) & 0xffff; + ULONG RevID = deviceExtension->RevID; + ULONG ChipType = deviceExtension->HwFlags & CHIPTYPE_MASK; + ULONG ChipFlags= deviceExtension->HwFlags & CHIPFLAG_MASK; + + KdPrint2((PRINT_PREFIX "UniataChipDetectChannels:\n" )); + switch(VendorID) { + case ATA_ACER_LABS_ID: + switch(deviceExtension->DevID) { + case 0x528710b9: + case 0x528810b9: + deviceExtension->NumberChannels = 4; + KdPrint2((PRINT_PREFIX "Acer 4 chan\n")); + } + break; + case ATA_PROMISE_ID: + + if(ChipType != PRMIO) { + break; + } + deviceExtension->NumberChannels = 4; + KdPrint2((PRINT_PREFIX "Promise 4 chan\n")); + break; + case ATA_MARVELL_ID: + KdPrint2((PRINT_PREFIX "Marvell\n")); + switch(deviceExtension->DevID) { + case 0x610111ab: + /* 88SX6101 only have 1 PATA channel */ + if(BMList[deviceExtension->DevIndex].channel) { + KdPrint2((PRINT_PREFIX "88SX6101 has no 2nd PATA chan\n")); + return FALSE; + } + deviceExtension->NumberChannels = 1; + KdPrint2((PRINT_PREFIX "88SX6101 PATA 1 chan\n")); + break; + } + break; + case ATA_ATI_ID: + KdPrint2((PRINT_PREFIX "ATI\n")); + switch(deviceExtension->DevID) { + case 0x438c1002: + case 0x439c1002: + /* IXP600 & IXP700 only have 1 PATA channel */ + if(BMList[deviceExtension->DevIndex].channel) { + KdPrint2((PRINT_PREFIX "New ATI no 2nd PATA chan\n")); + return FALSE; + } + deviceExtension->NumberChannels = 1; + KdPrint2((PRINT_PREFIX "New ATI PATA 1 chan\n")); + break; + } + case ATA_SILICON_IMAGE_ID: + + if(ChipFlags & SIIBUG) { + } + if(ChipType != SIIMIO) { + break; + } + if(!pciData) { + break; + } + + if(VendorID == ATA_SILICON_IMAGE_ID) { + KdPrint2((PRINT_PREFIX "New SII\n")); + } else { + KdPrint2((PRINT_PREFIX "ATI SATA\n")); + } + if(deviceExtension->HwFlags & SII4CH) { + deviceExtension->NumberChannels = 4; + KdPrint2((PRINT_PREFIX "4 chan\n")); + } + break; + case ATA_VIA_ID: + if((deviceExtension->DevID == 0x32491106) && + ScsiPortConvertPhysicalAddressToUlong((*ConfigInfo->AccessRanges)[5].RangeStart)) { + deviceExtension->NumberChannels = 3; + KdPrint2((PRINT_PREFIX "VIA 3 chan\n")); + } + break; + } // end switch(VendorID) + return TRUE; + +} // end UniataChipDetectChannels()
BOOLEAN UniataChipDetect( @@ -81,12 +177,27 @@ *simplexOnly = TRUE; }
+ // defaults + BaseIoAddressBM = pciData->u.type0.BaseAddresses[4] & ~0x07; + deviceExtension->MaxTransferMode = BaseIoAddressBM ? ATA_DMA : ATA_PIO4; + ConfigInfo->MaximumTransferLength = DEV_BSIZE*256; + deviceExtension->MaximumDmaTransferLength = ConfigInfo->MaximumTransferLength; + KdPrint2((PRINT_PREFIX "i: %#x\n", i)); if(i != BMLIST_TERMINATOR) { DevTypeInfo = (PBUSMASTER_CONTROLLER_INFORMATION)&BusMasterAdapters[i]; } else { + KdPrint2((PRINT_PREFIX " unknown dev, BM addr %#x", BaseIoAddressBM)); DevTypeInfo = NULL; - deviceExtension->MaxTransferMode = deviceExtension->BaseIoAddressBM_0.Addr ? ATA_DMA : ATA_PIO4; + KdPrint2((PRINT_PREFIX " MaxTransferMode %#x\n", deviceExtension->MaxTransferMode)); + + if(!UniataChipDetectChannels(HwDeviceExtension, pciData, DeviceNumber, ConfigInfo)) { + return FALSE; + } + if(!UniataAllocateLunExt(deviceExtension, UNIATA_ALLOCATE_NEW_LUNS)) { + return FALSE; + } + return FALSE; }
@@ -105,7 +216,7 @@ PCI_DEV_HW_SPEC_BM( 0730, 1039, 0x00, ATA_UDMA5, "SiS 730" , SIS100OLD ),
PCI_DEV_HW_SPEC_BM( 0646, 1039, 0x00, ATA_UDMA6, "SiS 645DX", SIS133NEW ), -/* PCI_DEV_HW_SPEC_BM( 0645, 1039, 0x00, ATA_UDMA6, "SiS 645" , SIS133NEW ),*/ +/* PCI_DEV_HW_SPEC_BM( 0645, 1039, 0x00, ATA_UDMA6, "SiS 645" , SIS133NEW ), /* PCI_DEV_HW_SPEC_BM( 0640, 1039, 0x00, ATA_UDMA4, "SiS 640" , SIS_SOUTH ),*/ PCI_DEV_HW_SPEC_BM( 0635, 1039, 0x00, ATA_UDMA5, "SiS 635" , SIS100NEW ), PCI_DEV_HW_SPEC_BM( 0633, 1039, 0x00, ATA_UDMA5, "SiS 633" , SIS100NEW ), @@ -144,7 +255,8 @@ PCI_DEV_HW_SPEC_BM( 3147, 1106, 0x00, ATA_UDMA6, "VIA 8233A" , VIA133 | VIAAST ), PCI_DEV_HW_SPEC_BM( 3177, 1106, 0x00, ATA_UDMA6, "VIA 8235" , VIA133 | VIAAST ), PCI_DEV_HW_SPEC_BM( 3227, 1106, 0x00, ATA_UDMA6, "VIA 8237" , VIA133 | VIAAST ), - PCI_DEV_HW_SPEC_BM( 3349, 1106, 0x00, ATA_UDMA6, "VIA 8237" , VIA133 | VIAAST ), + PCI_DEV_HW_SPEC_BM( 0591, 1106, 0x00, ATA_UDMA6, "VIA 8237A" , VIA133 | VIAAST ), + PCI_DEV_HW_SPEC_BM( 3349, 1106, 0x00, ATA_UDMA6, "VIA 8251" , VIA133 | VIAAST ), PCI_DEV_HW_SPEC_BM( ffff, ffff, 0xff, BMLIST_TERMINATOR , NULL , BMLIST_TERMINATOR ) };
@@ -163,10 +275,13 @@ case ATA_SIS_ID: KdPrint2((PRINT_PREFIX "ATA_SIS_ID\n")); DevTypeInfo = (BUSMASTER_CONTROLLER_INFORMATION*)&SiSAdapters[0]; - i = AtapiFindListedDev(DevTypeInfo, -1, HwDeviceExtension, SystemIoBusNumber, -1, NULL); + i = AtapiFindListedDev(DevTypeInfo, -1, HwDeviceExtension, SystemIoBusNumber, PCISLOTNUM_NOT_SPECIFIED, NULL); + if(i != BMLIST_TERMINATOR) { + deviceExtension->FullDevName = SiSAdapters[i].FullDevName; + } goto for_ugly_chips;
- case ATA_VIA_ID: + case ATA_VIA_ID: KdPrint2((PRINT_PREFIX "ATA_VIA_ID\n")); // New chips have own DeviceId if(deviceExtension->DevID != ATA_VIA82C571) @@ -175,12 +290,15 @@ // only by SouthBridge DeviceId DevTypeInfo = (BUSMASTER_CONTROLLER_INFORMATION*)&ViaSouthAdapters[0]; i = AtapiFindListedDev(DevTypeInfo, -1, HwDeviceExtension, SystemIoBusNumber, slotNumber, NULL); - if(i != 0xFFFFFFFF) { + if(i != BMLIST_TERMINATOR) { KdPrint2((PRINT_PREFIX "VIASOUTH\n")); deviceExtension->HwFlags |= VIASOUTH; } DevTypeInfo = (BUSMASTER_CONTROLLER_INFORMATION*)&ViaAdapters[0]; i = AtapiFindListedDev(DevTypeInfo, -1, HwDeviceExtension, SystemIoBusNumber, slotNumber, NULL); + if(i != BMLIST_TERMINATOR) { + deviceExtension->FullDevName = SiSAdapters[i].FullDevName; + } goto for_ugly_chips;
default: @@ -211,13 +329,13 @@ deviceExtension->MaxTransferMode = ATA_UDMA2; break;
- case 0x06401095: /* CMD 640 known bad, no DMA */ + case 0x06401039: /* CMD 640 known bad, no DMA */ case 0x06011039: *simplexOnly = TRUE;
/* FALLTHROUGH */
- case 0x10001042: /* RZ 100? known bad, no DMA */ + case 0x10001042: /* RZ 100x known bad, no DMA */ case 0x10011042:
if(deviceExtension->BaseIoAddressBM_0) @@ -276,20 +394,22 @@ if(deviceExtension->MaxTransferMode >= ATA_SA150) { deviceExtension->HwFlags |= UNIATA_SATA; } - +/* ConfigInfo->MaximumTransferLength = DEV_BSIZE*256; deviceExtension->MaximumDmaTransferLength = ConfigInfo->MaximumTransferLength; - +*/ ChipType = deviceExtension->HwFlags & CHIPTYPE_MASK; ChipFlags = deviceExtension->HwFlags & CHIPFLAG_MASK;
+ if(!UniataChipDetectChannels(HwDeviceExtension, pciData, DeviceNumber, ConfigInfo)) { + return FALSE; + } + if(!UniataAllocateLunExt(deviceExtension, UNIATA_ALLOCATE_NEW_LUNS)) { + return FALSE; + } + switch(VendorID) { case ATA_ACER_LABS_ID: - switch(deviceExtension->DevID) { - case 0x528710b9: - case 0x528810b9: - deviceExtension->NumberChannels = 4; - } if(ChipFlags & UNIATA_SATA) { deviceExtension->AltRegMap = TRUE; // inform generic resource allocator BaseIoAddress1 = AtapiGetIoRange(HwDeviceExtension, ConfigInfo, pciData, SystemIoBusNumber, @@ -299,6 +419,7 @@ BaseIoAddressBM = AtapiGetIoRange(HwDeviceExtension, ConfigInfo, pciData, SystemIoBusNumber, 4, 0, deviceExtension->NumberChannels*sizeof(IDE_BUSMASTER_REGISTERS)); for(c=0; c<deviceExtension->NumberChannels; c++) { + ULONG unit01 = (c & 1); ULONG unit10 = (c & 2); chan = &deviceExtension->chan[c];
@@ -353,7 +474,6 @@ if(ChipType != PRMIO) { break; } - deviceExtension->NumberChannels = 4; if(!pciData) { break; } @@ -424,9 +544,6 @@ } deviceExtension->BaseIoAddressSATA_0.Addr = BaseMemAddress; deviceExtension->BaseIoAddressSATA_0.MemIo = MemIo; - if(deviceExtension->HwFlags & SII4CH) { - deviceExtension->NumberChannels = 4; - }
for(c=0; c<deviceExtension->NumberChannels; c++) { ULONG unit01 = (c & 1); @@ -512,9 +629,9 @@ chan->RegTranslation[IDX_BM_PRD_Table].MemIo = MemIo;
chan->RegTranslation[IDX_SATA_SStatus].Addr = BaseMemAddress + offs + 0x40; - chan->RegTranslation[IDX_SATA_SStatus].MemIo = MemIo; + chan->RegTranslation[IDX_SATA_SStatus].MemIo = MemIo; chan->RegTranslation[IDX_SATA_SError].Addr = BaseMemAddress + offs + 0x44; - chan->RegTranslation[IDX_SATA_SError].MemIo = MemIo; + chan->RegTranslation[IDX_SATA_SError].MemIo = MemIo; chan->RegTranslation[IDX_SATA_SControl].Addr = BaseMemAddress + offs + 0x48; chan->RegTranslation[IDX_SATA_SControl].MemIo = MemIo;
@@ -555,14 +672,14 @@ if(tmp32 == ATA_SIS5513 || tmp32 == ATA_SIS5517) { i = AtapiFindListedDev((BUSMASTER_CONTROLLER_INFORMATION*)&SiSSouthAdapters[0], - -1, HwDeviceExtension, SystemIoBusNumber, -1, NULL); + -1, HwDeviceExtension, SystemIoBusNumber, PCISLOTNUM_NOT_SPECIFIED, NULL); if(i != BMLIST_TERMINATOR) { deviceExtension->HwFlags = (deviceExtension->HwFlags & ~CHIPTYPE_MASK) | SIS133OLD; //deviceExtension->MaxTransferMode = ATA_UDMA6; deviceExtension->MaxTransferMode = SiSSouthAdapters[i].MaxTransferMode; if(SiSSouthAdapters[i].RaidFlags & UNIATA_SATA) { deviceExtension->HwFlags |= UNIATA_SATA; - if(SiSSouthAdapters[i].nDeviceId == 0x01182) { + if(SiSSouthAdapters[i].nDeviceId == 0x1182) { SIS_182 = TRUE; } } @@ -617,16 +734,20 @@ if(ChipFlags & UNIATA_SATA) {
ULONG IoSize = 0; + ULONG BaseMemAddress = 0;
switch(DeviceID) { - case 3149: // VIA 6420 + case 0x3149: // VIA 6420 + KdPrint2((PRINT_PREFIX "VIA 6420\n")); IoSize = 0x80; break; - case 3249: // VIA 6421 + case 0x3249: // VIA 6421 + KdPrint2((PRINT_PREFIX "VIA 6421\n")); IoSize = 0x40; break; } if(IoSize) { + KdPrint2((PRINT_PREFIX "IoSize %x\n", IoSize)); /*deviceExtension->*/BaseMemAddress = AtapiGetIoRange(HwDeviceExtension, ConfigInfo, pciData, SystemIoBusNumber, 5, 0, IoSize * deviceExtension->NumberChannels); if((*ConfigInfo->AccessRanges)[5].RangeInMemory) { @@ -663,14 +784,18 @@ for (i=0; i<=IDX_BM_IO_SZ; i++) { chan->RegTranslation[IDX_BM_IO+i].Addr = BaseIoAddressBM_0 + sizeof(IDE_BUSMASTER_REGISTERS)*c + i; } - chan->RegTranslation[IDX_SATA_SStatus].Addr = BaseMemAddress + (c * IoSize); - chan->RegTranslation[IDX_SATA_SStatus].MemIo = MemIo; - chan->RegTranslation[IDX_SATA_SError].Addr = BaseMemAddress + 4 + (c * IoSize); - chan->RegTranslation[IDX_SATA_SError].MemIo = MemIo; - chan->RegTranslation[IDX_SATA_SControl].Addr = BaseMemAddress + 8 + (c * IoSize); - chan->RegTranslation[IDX_SATA_SControl].MemIo = MemIo; - - chan->ChannelCtrlFlags |= CTRFLAGS_NO_SLAVE; + if(c < 2) { + // Do not setup SATA registers for PATA part + chan->RegTranslation[IDX_SATA_SStatus].Addr = BaseMemAddress + (c * IoSize); + chan->RegTranslation[IDX_SATA_SStatus].MemIo = MemIo; + chan->RegTranslation[IDX_SATA_SError].Addr = BaseMemAddress + 4 + (c * IoSize); + chan->RegTranslation[IDX_SATA_SError].MemIo = MemIo; + chan->RegTranslation[IDX_SATA_SControl].Addr = BaseMemAddress + 8 + (c * IoSize); + chan->RegTranslation[IDX_SATA_SControl].MemIo = MemIo; + + chan->ChannelCtrlFlags |= CTRFLAGS_NO_SLAVE; + } + } } } @@ -862,6 +987,7 @@ IN ULONG slotNumber ) { + PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension; PCI_COMMON_CONFIG pciData; ULONG funcNumber; ULONG busDataRead; @@ -913,6 +1039,7 @@ IN ULONG c ) { + PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension; PCI_COMMON_CONFIG pciData; ULONG funcNumber; ULONG busDataRead; @@ -1024,7 +1151,7 @@ res = FALSE; for (j=0; j>=2; i -= 8) { i = (3-(channel*2+j))*8; - if (((reg50 >> (i & 16)) & 8) && + if (((reg50 >> (i & 0x10)) & 8) && ((reg50 >> i) & 0x20) && (((reg50 >> i) & 7) < a)) {
@@ -1034,6 +1161,35 @@ return res;
} // end via_cable80() + +BOOLEAN +generic_cable80( + IN PHW_DEVICE_EXTENSION deviceExtension, + IN ULONG channel, // physical channel number (0-1) + IN ULONG pci_reg, + IN ULONG bit_offs + ) +{ + PVOID HwDeviceExtension = (PVOID)deviceExtension; + ULONG slotNumber = deviceExtension->slotNumber; + ULONG SystemIoBusNumber = deviceExtension->SystemIoBusNumber; + + ULONG ChipType = deviceExtension->HwFlags & CHIPTYPE_MASK; + PHW_CHANNEL chan; + ULONG c; // logical channel (for Compatible Mode controllers) + UCHAR tmp8; + + c = channel - deviceExtension->Channel; // logical channel (for Compatible Mode controllers) + chan = &deviceExtension->chan[c]; + + GetPciConfig1(pci_reg, tmp8); + if(!(tmp8 & (1 << (channel << bit_offs)))) { + chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); + return FALSE; + } + + return TRUE; +} // end generic_cable80()
VOID UniAtaReadLunConfig( @@ -1065,11 +1221,21 @@ tmp32 = AtapiRegCheckDevValue(deviceExtension, channel, ldev, L"PreferedTransferMode", 0xffffffff); LunExt->opt_PreferedTransferMode = tmp32;
+ tmp32 = AtapiRegCheckDevValue(deviceExtension, channel, ldev, L"ReadOnly", 0); + if(tmp32 <= 2) { + LunExt->opt_ReadOnly = (UCHAR)tmp32; + } + tmp32 = AtapiRegCheckDevValue(deviceExtension, channel, ldev, L"GeomType", 0xffffffff); if(tmp32 > 2) { tmp32 = 0xffffffff; } LunExt->opt_GeomType = tmp32; + + tmp32 = AtapiRegCheckDevValue(deviceExtension, channel, ldev, L"Hidden", 0); + if(tmp32) { + LunExt->DeviceFlags |= DFLAGS_HIDDEN; + }
return; } // end UniAtaReadLunConfig() @@ -1108,6 +1274,7 @@ }
if(c == CHAN_NOT_SPECIFIED) { + KdPrint2((PRINT_PREFIX "MaxTransferMode (base): %#x\n", deviceExtension->MaxTransferMode)); for(c=0; c<deviceExtension->NumberChannels; c++) { chan = &deviceExtension->chan[c]; chan->MaxTransferMode = deviceExtension->MaxTransferMode; @@ -1176,12 +1343,18 @@ USHORT tmp16; ULONG tmp32; ULONG c; // logical channel (for Compatible Mode controllers) + BOOLEAN CheckCable = FALSE; //ULONG BaseIoAddress;
- if(channel != CHAN_NOT_SPECIFIED) { + switch(channel) { + case CHAN_NOT_SPECIFIED_CHECK_CABLE: + CheckCable = TRUE; + /* FALLTHROUGH */ + case CHAN_NOT_SPECIFIED: + c = CHAN_NOT_SPECIFIED; + break; + default: c = channel - deviceExtension->Channel; // logical channel (for Compatible Mode controllers) - } else { - c = CHAN_NOT_SPECIFIED; }
KdPrint2((PRINT_PREFIX "AtapiChipInit: dev %#x, ph chan %d\n", DeviceNumber, channel )); @@ -1223,15 +1396,15 @@
/* enable ATAPI UDMA mode */ ChangePciConfig1(0x53, (a | 0x01)); + + } else { + // check 80-pin cable + generic_cable80(deviceExtension, channel, 0x4a, 0); } } else { if(c == CHAN_NOT_SPECIFIED) { /* deactivate the ATAPI FIFO and enable ATAPI UDMA */ ChangePciConfig1(0x53, (a | 0x03)); - // ATAPI DMA R/O - for(c=0; c<deviceExtension->NumberChannels; c++) { - deviceExtension->chan[c].ChannelCtrlFlags |= CTRFLAGS_DMA_RO; - } } else { // ATAPI DMA R/O deviceExtension->chan[c].ChannelCtrlFlags |= CTRFLAGS_DMA_RO; @@ -1250,21 +1423,11 @@ if(deviceExtension->MaxTransferMode < ATA_UDMA2) break; // check 80-pin cable - if(ChipFlags & AMDCABLE) { + if(!(ChipFlags & UNIATA_NO80CHK)) { if(c == CHAN_NOT_SPECIFIED) { - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - GetPciConfig1(0x42, tmp8); - if(!(tmp8 & (1 << channel))) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } + // do nothing } else { - chan = &deviceExtension->chan[c]; - GetPciConfig1(0x42, tmp8); - if(!(tmp8 & (1 << channel))) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } + generic_cable80(deviceExtension, channel, 0x42, 0); } } break; @@ -1289,13 +1452,6 @@ } }
- // check 80-pin cable - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - if(!hpt_cable80(deviceExtension, channel)) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } } else { // check 80-pin cable chan = &deviceExtension->chan[c]; @@ -1337,14 +1493,9 @@ } if(deviceExtension->MaxTransferMode < ATA_UDMA2) break; + // check 80-pin cable if(c == CHAN_NOT_SPECIFIED) { - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - GetPciConfig2(0x54, reg54); - if( ((reg54 >> (channel*2)) & 30) != 30) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } + // do nothing } else { chan = &deviceExtension->chan[c]; GetPciConfig2(0x54, reg54); @@ -1366,7 +1517,7 @@ /* enable device and PHY state change interrupts */ AtapiWritePortEx4(NULL, (ULONG)(&deviceExtension->BaseIoAddressSATA_0),offs+4, 0x000d000d); /* disable NCQ support */ - AtapiWritePortEx4(NULL, (ULONG)(&deviceExtension->BaseIoAddressSATA_0),0x0400, + AtapiWritePortEx4(NULL, (ULONG)(&deviceExtension->BaseIoAddressSATA_0),0x0400, AtapiReadPortEx4(NULL, (ULONG)(&deviceExtension->BaseIoAddressSATA_0),0x0400) & 0xfffffff9); } else { /* clear interrupt status */ @@ -1380,27 +1531,19 @@ //UniataSataPhyEnable(HwDeviceExtension, c); } } else { - UCHAR reg52; - - // check 80-pin cable + //UCHAR reg52; + if(c == CHAN_NOT_SPECIFIED) { - /* set prefetch, postwrite */ ChangePciConfig1(0x51, (a & 0x0f)); - - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - GetPciConfig1(0x52, reg52); - if( !((reg52 >> (channel*2)) & 0x01)) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } } else { - chan = &deviceExtension->chan[c]; + // check 80-pin cable + generic_cable80(deviceExtension, channel, 0x52, 1); +/* chan = &deviceExtension->chan[c]; GetPciConfig1(0x52, reg52); if( !((reg52 >> (channel*2)) & 0x01)) { chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } + }*/ } } break; } @@ -1411,7 +1554,7 @@ /* setup clocks */ if(c == CHAN_NOT_SPECIFIED) { // ATA_OUTB(ctlr->r_res1, 0x11, ATA_INB(ctlr->r_res1, 0x11) | 0x0a); - AtapiWritePortEx1(NULL, (ULONG)(&deviceExtension->BaseIoAddressBM_0),0x11, + AtapiWritePortEx1(NULL, (ULONG)(&deviceExtension->BaseIoAddressBM_0),0x11, AtapiReadPortEx1(NULL, (ULONG)(&deviceExtension->BaseIoAddressBM_0),0x11) | 0x0a ); } /* FALLTHROUGH */ @@ -1419,16 +1562,10 @@ /* enable burst mode */ // ATA_OUTB(ctlr->r_res1, 0x1f, ATA_INB(ctlr->r_res1, 0x1f) | 0x01); if(c == CHAN_NOT_SPECIFIED) { - AtapiWritePortEx1(NULL, (ULONG)(&deviceExtension->BaseIoAddressBM_0),0x1f, + AtapiWritePortEx1(NULL, (ULONG)(&deviceExtension->BaseIoAddressBM_0),0x1f, AtapiReadPortEx1(NULL, (ULONG)(&deviceExtension->BaseIoAddressBM_0),0x1f) | 0x01 ); - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - GetPciConfig2(0x50, Reg50); - if(Reg50 & (1 << (channel+10))) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } } else { + // check 80-pin cable chan = &deviceExtension->chan[c]; GetPciConfig2(0x50, Reg50); if(Reg50 & (1 << (channel+10))) { @@ -1438,14 +1575,9 @@ break; case PRTX: if(c == CHAN_NOT_SPECIFIED) { - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - AtapiWritePort1(chan, IDX_BM_DeviceSpecific0, 0x0b); - if(AtapiReadPort1(chan, IDX_BM_DeviceSpecific1) & 0x04) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } + // do nothing } else { + // check 80-pin cable chan = &deviceExtension->chan[c]; AtapiWritePort1(chan, IDX_BM_DeviceSpecific0, 0x0b); if(AtapiReadPort1(chan, IDX_BM_DeviceSpecific1) & 0x04) { @@ -1458,21 +1590,12 @@ if(ChipFlags & PRSATA) { AtapiWritePortEx4(NULL, (ULONG)(&deviceExtension->BaseIoAddressBM_0),0x6c, 0x000000ff); } - for(c=0; c<4; c++) { - chan = &deviceExtension->chan[c]; - AtapiWritePort4(chan, IDX_BM_Command, - (AtapiReadPort4(chan, IDX_BM_Command) & ~0x00000f8f) | channel ); - AtapiWritePort4(chan, IDX_BM_DeviceSpecific0, 0x00000001); - if(chan->MaxTransferMode < ATA_SA150 && - (AtapiReadPort4(chan, IDX_BM_Command) & 0x01000000)) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } } else { chan = &deviceExtension->chan[c]; - AtapiWritePort4(chan, IDX_BM_Command, + AtapiWritePort4(chan, IDX_BM_Command, (AtapiReadPort4(chan, IDX_BM_Command) & ~0x00000f8f) | channel ); AtapiWritePort4(chan, IDX_BM_DeviceSpecific0, 0x00000001); + // check 80-pin cable if(chan->MaxTransferMode < ATA_SA150 && (AtapiReadPort4(chan, IDX_BM_Command) & 0x01000000)) { chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); @@ -1507,7 +1630,7 @@ case SIIMIO: {
KdPrint2((PRINT_PREFIX "SII\n")); - UCHAR Reg79; + USHORT Reg79;
if(c == CHAN_NOT_SPECIFIED) { if(ChipFlags & SIISETCLK) { @@ -1523,16 +1646,11 @@ } } if(deviceExtension->MaxTransferMode < ATA_SA150) { - KdPrint2((PRINT_PREFIX "Check UDMA66 cable\n")); + // check 80-pin cable if(c == CHAN_NOT_SPECIFIED) { - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - GetPciConfig2(0x79, Reg79); - if(Reg79 & (channel ? 0x02 : 0x01)) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } + // do nothing } else { + KdPrint2((PRINT_PREFIX "Check UDMA66 cable\n")); chan = &deviceExtension->chan[c]; GetPciConfig2(0x79, Reg79); if(Reg79 & (channel ? 0x02 : 0x01)) { @@ -1647,14 +1765,9 @@ } if(ChipType == SIS133NEW) { USHORT tmp16; + // check 80-pin cable if(c == CHAN_NOT_SPECIFIED) { - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - GetPciConfig2(channel ? 0x52 : 0x50, tmp16); - if(tmp16 & 0x8000) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } + // do nothing } else { chan = &deviceExtension->chan[c]; GetPciConfig2(channel ? 0x52 : 0x50, tmp16); @@ -1663,14 +1776,9 @@ } } } else { + // check 80-pin cable if(c == CHAN_NOT_SPECIFIED) { - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - GetPciConfig1(48, tmp8); - if(tmp8 & (0x10 << channel)) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } + // do nothing } else { chan = &deviceExtension->chan[c]; GetPciConfig1(48, tmp8); @@ -1693,23 +1801,7 @@ ChangePciConfig2(/*PCIR_COMMAND*/0x04, (a & ~0x0400)); break; } - } - // check 80-pin cable - if(c == CHAN_NOT_SPECIFIED) { - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - if(!via_cable80(deviceExtension, channel)) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } - } else { - chan = &deviceExtension->chan[c]; - if(!via_cable80(deviceExtension, channel)) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } - - if(c == CHAN_NOT_SPECIFIED) { + /* the southbridge might need the data corruption fix */ if(ChipFlags & VIABUG) { AtapiViaSouthBridgeFixup(HwDeviceExtension, PCIConfiguration, @@ -1732,6 +1824,12 @@ /* set sector size */ SetPciConfig2(0x60, DEV_BSIZE); SetPciConfig2(0x68, DEV_BSIZE); + } else { + // check 80-pin cable + chan = &deviceExtension->chan[c]; + if(!via_cable80(deviceExtension, channel)) { + chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); + } }
break; @@ -1747,18 +1845,9 @@ /* set default active & recover timings */ SetPciConfig1(0x54, 0x31); SetPciConfig1(0x56, 0x31); - } - - GetPciConfig2(0x40, tmp16); - // check 80-pin cable - if(c == CHAN_NOT_SPECIFIED) { - for(c=0; c<deviceExtension->NumberChannels; c++) { - chan = &deviceExtension->chan[c]; - if(!(tmp16 & (channel ? 0x08 : 0x04))) { - chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); - } - } } else { + // check 80-pin cable + GetPciConfig2(0x40, tmp16); chan = &deviceExtension->chan[c]; if(!(tmp16 & (channel ? 0x08 : 0x04))) { chan->MaxTransferMode = min(deviceExtension->MaxTransferMode, ATA_UDMA2); @@ -1766,6 +1855,23 @@ }
break; + default: + if(c != CHAN_NOT_SPECIFIED) { + // We don't know how to check for 80-pin cable on unknown controllers. + // Later we shall check bit in IDENTIFY structure, but it is not reliable way. + // So, leave this flag to use as hint in error recovery procedures + KdPrint2((PRINT_PREFIX "UNIATA_NO80CHK\n")); + deviceExtension->HwFlags |= UNIATA_NO80CHK; + } + break; + } + + // In all places separate channels are inited after common controller init + // The only exception is probe. But there we may need info about 40/80 pin and MaxTransferRate + if(CheckCable && !(ChipFlags & (UNIATA_NO80CHK | UNIATA_SATA))) { + for(c=0; c<deviceExtension->NumberChannels; c++) { + AtapiChipInit(HwDeviceExtension, DeviceNumber, c); + } }
return TRUE;
Modified: trunk/reactos/drivers/storage/ide/uniata/id_probe.cpp URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/id_probe.cpp [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/id_probe.cpp [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -1,6 +1,6 @@ /*++
-Copyright (c) 2002-2007 Alexandr A. Telyatnikov (Alter) +Copyright (c) 2002-2008 Alexandr A. Telyatnikov (Alter)
Module Name: id_probe.cpp @@ -76,7 +76,7 @@ VOID AtapiDoNothing(VOID) { - //ULONG i = 0; + ULONG i = 0; return; } // end AtapiDoNothing()
@@ -504,8 +504,8 @@ /* if(known) { RtlCopyMemory(newBMListPtr, (PVOID)&(BusMasterAdapters[i]), sizeof(BUSMASTER_CONTROLLER_INFORMATION)); } else {*/ - sprintf((PCHAR)vendorStrPtr, "%4.4x", (UINT32)VendorID); - sprintf((PCHAR)deviceStrPtr, "%4.4x", (UINT32)DeviceID); + sprintf((PCHAR)vendorStrPtr, "%4.4x", VendorID); + sprintf((PCHAR)deviceStrPtr, "%4.4x", DeviceID);
RtlCopyMemory(&(newBMListPtr->VendorIdStr), (PCHAR)vendorStrPtr, 4); RtlCopyMemory(&(newBMListPtr->DeviceIdStr), (PCHAR)deviceStrPtr, 4); @@ -767,6 +767,44 @@ Again ); } // end UniataFindCompatBusMasterController2() + +BOOLEAN +UniataAllocateLunExt( + PHW_DEVICE_EXTENSION deviceExtension, + ULONG NewNumberChannels + ) +{ + PHW_LU_EXTENSION old_luns = NULL; + PHW_CHANNEL old_chans = NULL; + + KdPrint2((PRINT_PREFIX "allocate Luns for %d channels\n", deviceExtension->NumberChannels)); + + old_luns = deviceExtension->lun; + old_chans = deviceExtension->chan; + + if(old_luns || old_chans) { + if(NewNumberChannels == UNIATA_ALLOCATE_NEW_LUNS) { + KdPrint2((PRINT_PREFIX "already allocated!\n")); + return FALSE; + } + } + + deviceExtension->lun = (PHW_LU_EXTENSION)ExAllocatePool(NonPagedPool, sizeof(HW_LU_EXTENSION) * (deviceExtension->NumberChannels+1) * IDE_MAX_LUN_PER_CHAN); + if (!deviceExtension->lun) { + KdPrint2((PRINT_PREFIX "!deviceExtension->lun => SP_RETURN_ERROR\n")); + return FALSE; + } + RtlZeroMemory(deviceExtension->lun, sizeof(HW_LU_EXTENSION) * (deviceExtension->NumberChannels+1) * IDE_MAX_LUN_PER_CHAN); + + deviceExtension->chan = (PHW_CHANNEL)ExAllocatePool(NonPagedPool, sizeof(HW_CHANNEL) * (deviceExtension->NumberChannels+1)); + if (!deviceExtension->chan) { + KdPrint2((PRINT_PREFIX "!deviceExtension->chan => SP_RETURN_ERROR\n")); + return FALSE; + } + RtlZeroMemory(deviceExtension->chan, sizeof(HW_CHANNEL) * (deviceExtension->NumberChannels+1)); + return TRUE; +} // end UniataAllocateLunExt() +
/*++
@@ -861,6 +899,8 @@
KdPrint2((PRINT_PREFIX "UniataFindBusMasterController: Context=%x, BMListLen=%d\n", Context, BMListLen));
+ KdPrint2((PRINT_PREFIX "ConfigInfo->Length %x\n", ConfigInfo->Length)); + if(ForceSimplex) { KdPrint2((PRINT_PREFIX "ForceSimplex (1)\n")); simplexOnly = TRUE; @@ -893,7 +933,7 @@ i &= ~0x80000000; if(i >= BMListLen) { KdPrint2((PRINT_PREFIX " => SP_RETURN_NOT_FOUND\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; } } BMList[i].channel = (UCHAR)channel; @@ -933,13 +973,13 @@ #ifndef UNIATA_CORE if (busDataRead < (ULONG)PCI_COMMON_HDR_LENGTH) { KdPrint2((PRINT_PREFIX "busDataRead < PCI_COMMON_HDR_LENGTH => SP_RETURN_ERROR\n")); - return SP_RETURN_ERROR; + goto exit_error; }
KdPrint2((PRINT_PREFIX "busDataRead\n")); if (pciData.VendorID == PCI_INVALID_VENDORID) { KdPrint2((PRINT_PREFIX "PCI_INVALID_VENDORID\n")); - return SP_RETURN_ERROR; + goto exit_error; } #endif //UNIATA_CORE
@@ -964,7 +1004,7 @@
if(BaseClass != PCI_DEV_CLASS_STORAGE) { KdPrint2((PRINT_PREFIX "BaseClass != PCI_DEV_CLASS_STORAGE => SP_RETURN_NOT_FOUND\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
KdPrint2((PRINT_PREFIX "Storage Class\n")); @@ -973,13 +1013,13 @@ if(VendorID != BMList[i].nVendorId || DeviceID != BMList[i].nDeviceId) { KdPrint2((PRINT_PREFIX "device not suitable\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
found = UniataCheckPCISubclass(BMList[i].Known, BMList[i].RaidFlags, SubClass); if(!found) { KdPrint2((PRINT_PREFIX "Subclass not supported\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
ConfigInfo->AlignmentMask = 0x00000003; @@ -1017,7 +1057,7 @@ KdPrint2((PRINT_PREFIX "HwFlags = %x\n (1)", deviceExtension->HwFlags)); if(!found) { KdPrint2((PRINT_PREFIX "!found => SP_RETURN_NOT_FOUND\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
KdPrint2((PRINT_PREFIX "HwFlags = %x\n (2)", deviceExtension->HwFlags)); @@ -1050,11 +1090,11 @@ } else { if((channel==0) && ConfigInfo->AtdiskPrimaryClaimed) { KdPrint2((PRINT_PREFIX "Error: Primary channel already claimed by another driver\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; } if((channel==1) && ConfigInfo->AtdiskSecondaryClaimed) { KdPrint2((PRINT_PREFIX "Error: Secondary channel already claimed by another driver\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; } } } @@ -1274,12 +1314,14 @@
if((WinVer_Id() >= WinVer_NT) || (ConfigInfo->Length >= sizeof(_ConfigInfo->comm) + sizeof(_ConfigInfo->nt4))) { + KdPrint2((PRINT_PREFIX "update ConfigInfo->nt4\n")); _ConfigInfo->nt4.DeviceExtensionSize = sizeof(HW_DEVICE_EXTENSION); _ConfigInfo->nt4.SpecificLuExtensionSize = sizeof(HW_LU_EXTENSION); _ConfigInfo->nt4.SrbExtensionSize = sizeof(ATA_REQ); } if((WinVer_Id() > WinVer_2k) || (ConfigInfo->Length >= sizeof(_ConfigInfo->comm) + sizeof(_ConfigInfo->nt4) + sizeof(_ConfigInfo->w2k))) { + KdPrint2((PRINT_PREFIX "update ConfigInfo->w2k\n")); _ConfigInfo->w2k.Dma64BitAddresses = 0; _ConfigInfo->w2k.ResetTargetSupported = TRUE; _ConfigInfo->w2k.MaximumNumberOfLogicalUnits = 2; @@ -1317,7 +1359,7 @@
if(AltInit) { // I'm sorry, I have to do this - // when Win doesn't + // when Win doesn't
if(ConfigInfo->AdapterInterfaceType == Isa /*&& // InDriverEntry*/) { @@ -1526,7 +1568,7 @@ // Search for devices on this controller. if (!skip_find_dev && FindDevices(HwDeviceExtension, - FALSE, + 0, c)) { KdPrint2((PRINT_PREFIX "Found some devices\n")); found = TRUE; @@ -1592,7 +1634,7 @@ BaseIoAddressBM_0);
KdPrint2((PRINT_PREFIX "return SP_RETURN_NOT_FOUND\n")); - return SP_RETURN_NOT_FOUND; + goto exit_notfound; } else {
KdPrint2((PRINT_PREFIX "exit: init spinlock\n")); @@ -1641,6 +1683,16 @@
ConfigInfo->NumberOfBuses++; // add virtual channel for communication port return SP_RETURN_FOUND; + +exit_error: + if (deviceExtension->lun) ExFreePool(deviceExtension->lun); + if (deviceExtension->chan) ExFreePool(deviceExtension->chan); + return SP_RETURN_ERROR; + +exit_notfound: + ExFreePool(deviceExtension->lun); + ExFreePool(deviceExtension->chan); + return SP_RETURN_NOT_FOUND;
} // end UniataFindBusMasterController()
@@ -1713,7 +1765,7 @@ } if(i >= BMListLen) { KdPrint2((PRINT_PREFIX "unexpected device arrival => SP_RETURN_NOT_FOUND\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; } }
@@ -1747,13 +1799,13 @@
if (busDataRead < PCI_COMMON_HDR_LENGTH) { KdPrint2((PRINT_PREFIX "busDataRead < PCI_COMMON_HDR_LENGTH => SP_RETURN_ERROR\n")); - return SP_RETURN_ERROR; + goto exit_error; }
KdPrint2((PRINT_PREFIX "busDataRead\n")); if (pciData.VendorID == PCI_INVALID_VENDORID) { KdPrint2((PRINT_PREFIX "PCI_INVALID_VENDORID\n")); - return SP_RETURN_ERROR; + goto exit_error; }
VendorID = pciData.VendorID; @@ -1777,7 +1829,7 @@
if(BaseClass != PCI_DEV_CLASS_STORAGE) { KdPrint2((PRINT_PREFIX "BaseClass != PCI_DEV_CLASS_STORAGE => SP_RETURN_NOT_FOUND\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
KdPrint2((PRINT_PREFIX "Storage Class\n")); @@ -1786,13 +1838,13 @@ if(VendorID != BMList[i].nVendorId || DeviceID != BMList[i].nDeviceId) { KdPrint2((PRINT_PREFIX "device not suitable\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
if((BMList[i].RaidFlags & UNIATA_RAID_CONTROLLER) && SkipRaids) { KdPrint2((PRINT_PREFIX "RAID support disabled\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
switch(SubClass) { @@ -1804,7 +1856,7 @@ break; default: KdPrint2((PRINT_PREFIX "Subclass not supported\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
ConfigInfo->AlignmentMask = 0x00000003; @@ -1842,7 +1894,7 @@ KdPrint2((PRINT_PREFIX "HwFlags = %x\n (1)", deviceExtension->HwFlags)); if(!found) { KdPrint2((PRINT_PREFIX "!found => SP_RETURN_NOT_FOUND\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
KdPrint2((PRINT_PREFIX "HwFlags = %x\n (2)", deviceExtension->HwFlags)); @@ -1868,16 +1920,16 @@ deviceExtension->NumberChannels = 1; } else { KdPrint2((PRINT_PREFIX "!MasterDev => SP_RETURN_NOT_FOUND\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
if(deviceExtension->AltRegMap) { KdPrint2((PRINT_PREFIX " Non-standard registers layout => SP_RETURN_NOT_FOUND\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; } if(IsBusMaster(&pciData)) { KdPrint2((PRINT_PREFIX " !BusMaster => SP_RETURN_NOT_FOUND\n")); - return(SP_RETURN_NOT_FOUND); + goto exit_notfound; }
KdPrint2((PRINT_PREFIX "IsBusMaster == TRUE\n")); @@ -1959,6 +2011,16 @@ //PrintNtConsole("return SP_RETURN_FOUND, de %#x, c0.lun0 %#x\n", deviceExtension, deviceExtension->chan[0].lun[0]);
return SP_RETURN_FOUND; + +exit_error: + if (deviceExtension->lun) ExFreePool(deviceExtension->lun); + if (deviceExtension->chan) ExFreePool(deviceExtension->chan); + return SP_RETURN_ERROR; + +exit_notfound: + ExFreePool(deviceExtension->lun); + ExFreePool(deviceExtension->chan); + return SP_RETURN_NOT_FOUND;
} // end UniataFindFakeBusMasterController()
@@ -2143,7 +2205,7 @@ ) { PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension; - PHW_CHANNEL chan = &(deviceExtension->chan[0]); + PHW_CHANNEL chan; PULONG adapterCount = (PULONG)Context; PUCHAR ioSpace; ULONG i; @@ -2176,6 +2238,12 @@ KdPrint2((PRINT_PREFIX " assume max PIO4\n")); deviceExtension->MaxTransferMode = ATA_PIO4; deviceExtension->NumberChannels = 1; + + if(!UniataAllocateLunExt(deviceExtension, UNIATA_ALLOCATE_NEW_LUNS)) { + goto exit_error; + } + + chan = &(deviceExtension->chan[0]);
deviceExtension->AdapterInterfaceType = deviceExtension->OrigAdapterInterfaceType @@ -2531,8 +2599,15 @@
KdPrint2((PRINT_PREFIX "AtapiFindController: return SP_RETURN_NOT_FOUND\n")); + ExFreePool(deviceExtension->lun); + ExFreePool(deviceExtension->chan); return(SP_RETURN_NOT_FOUND);
+exit_error: + if (deviceExtension->lun) ExFreePool(deviceExtension->lun); + if (deviceExtension->chan) ExFreePool(deviceExtension->chan); + return SP_RETURN_ERROR; + } // end AtapiFindController()
BOOLEAN
Modified: trunk/reactos/drivers/storage/ide/uniata/id_sata.cpp URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/id_sata.cpp [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/id_sata.cpp [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -7,7 +7,7 @@ ) { PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension; - //ULONG Channel = deviceExtension->Channel + lChannel; + ULONG Channel = deviceExtension->Channel + lChannel; PHW_CHANNEL chan = &deviceExtension->chan[lChannel]; SATA_SSTATUS_REG SStatus; ULONG i; @@ -126,7 +126,7 @@ { PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension; PHW_CHANNEL chan = &deviceExtension->chan[lChannel]; - //ULONG ChipFlags = deviceExtension->HwFlags & CHIPFLAG_MASK; + ULONG ChipFlags = deviceExtension->HwFlags & CHIPFLAG_MASK; SATA_SSTATUS_REG SStatus; SATA_SERROR_REG SError;
@@ -134,7 +134,7 @@ //if(ChipFlags & UNIATA_SATA) {
SStatus.Reg = AtapiReadPort4(chan, IDX_SATA_SStatus); - SError.Reg = AtapiReadPort4(chan, IDX_SATA_SError); + SError.Reg = AtapiReadPort4(chan, IDX_SATA_SError);
if(SStatus.Reg) { KdPrint2((PRINT_PREFIX " SStatus %x\n", SStatus.Reg)); @@ -203,13 +203,14 @@ { PHW_DEVICE_EXTENSION deviceExtension = (PHW_DEVICE_EXTENSION)HwDeviceExtension; ULONG version; - ULONG c; + ULONG c, i, n; PHW_CHANNEL chan; ULONG offs; ULONG BaseMemAddress; ULONG PI; ULONG CAP; BOOLEAN MemIo; + ULONGLONG base;
/* reset AHCI controller */ AtapiWritePortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, IDX_AHCI_GHC, @@ -225,9 +226,11 @@ AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, IDX_AHCI_GHC) | AHCI_GHC_AE);
CAP = AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, IDX_AHCI_CAP); + PI = AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, IDX_AHCI_PI); /* get the number of HW channels */ + for(i=PI, n=0; i; n++, i=i>>1); deviceExtension->NumberChannels = - (CAP & AHCI_CAP_NOP_MASK)+1; + max((CAP & AHCI_CAP_NOP_MASK)+1, n); if(CAP & AHCI_CAP_S64A) { KdPrint2((PRINT_PREFIX " AHCI 64bit\n")); deviceExtension->Host64 = TRUE; @@ -242,7 +245,6 @@ AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, IDX_AHCI_GHC) | AHCI_GHC_IE);
version = AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, IDX_AHCI_VS); - PI = AtapiReadPortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, IDX_AHCI_PI); KdPrint2((PRINT_PREFIX " AHCI version %x%x.%x%x controller with %d ports (mask %x) detected\n", (version >> 24) & 0xff, (version >> 16) & 0xff, (version >> 8) & 0xff, version & 0xff, deviceExtension->NumberChannels, PI)); @@ -281,6 +283,24 @@ chan->RegTranslation[IDX_SATA_SActive].Addr = BaseMemAddress + offs + FIELD_OFFSET(IDE_AHCI_PORT_REGISTERS, SACT); chan->RegTranslation[IDX_SATA_SActive].MemIo = MemIo;
+ AtapiDmaAlloc(HwDeviceExtension, NULL, c); + + base = chan->AHCI_CL_PhAddr; + if(!base) { + KdPrint2((PRINT_PREFIX " AHCI buffer allocation failed\n")); + return FALSE; + } + AtapiWritePortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, offs + IDX_AHCI_P_CLB, + (ULONG)(base & 0xffffffff)); + AtapiWritePortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, offs + IDX_AHCI_P_CLB + 4, + (ULONG)((base >> 32) & 0xffffffff)); + + base = chan->AHCI_CL_PhAddr + ATA_AHCI_MAX_TAGS; + AtapiWritePortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, offs + IDX_AHCI_P_FB, + (ULONG)(base & 0xffffffff)); + AtapiWritePortEx4(NULL, (ULONG)&deviceExtension->BaseIoAHCI_0, offs + IDX_AHCI_P_FB + 4, + (ULONG)((base >> 32) & 0xffffffff)); + chan->ChannelCtrlFlags |= CTRFLAGS_NO_SLAVE; }
@@ -367,6 +387,13 @@ i = 0; plba = (PUCHAR)&lba;
+ if((AtaCommandFlags[command] & ATA_CMD_FLAG_LBAIOsupp) && + CheckIfBadBlock(&(deviceExtension->lun[ldev]), lba, count)) { + KdPrint3((PRINT_PREFIX ": artificial bad block, lba %#I64x count %#x\n", lba, count)); + return IDE_STATUS_ERROR; + //return SRB_STATUS_ERROR; + } + /* translate command into 48bit version */ if ((lba >= ATA_MAX_LBA28 || count > 256) && deviceExtension->lun[ldev].IdentifyData.FeaturesSupport.Address48) { @@ -378,36 +405,36 @@ } }
- fis[i++] = 0x27; /* host to device */ - fis[i++] = 0x80; /* command FIS (note PM goes here) */ - fis[i++] = command; - fis[i++] = (UCHAR)feature; - - fis[i++] = plba[0]; - fis[i++] = plba[1]; - fis[i++] = plba[2]; - fis[i] = IDE_USE_LBA | (DeviceNumber ? IDE_DRIVE_2 : IDE_DRIVE_1); + fis[0] = 0x27; /* host to device */ + fis[1] = 0x80; /* command FIS (note PM goes here) */ + fis[2] = command; + fis[3] = (UCHAR)feature; + + fis[4] = plba[0]; + fis[5] = plba[1]; + fis[6] = plba[2]; + fis[7] = IDE_USE_LBA | (DeviceNumber ? IDE_DRIVE_2 : IDE_DRIVE_1); if ((lba >= ATA_MAX_LBA28 || count > 256) && deviceExtension->lun[ldev].IdentifyData.FeaturesSupport.Address48) { i++; } else { - fis[i++] |= (plba[3] >> 24) & 0x0f; - } - - fis[i++] = plba[3]; - fis[i++] = plba[4]; - fis[i++] = plba[5]; - fis[i++] = (UCHAR)(feature>>8) & 0xff; - - fis[i++] = (UCHAR)count & 0xff; - fis[i++] = (UCHAR)(count>>8) & 0xff; - fis[i++] = 0x00; - fis[i++] = IDE_DC_A_4BIT; - - fis[i++] = 0x00; - fis[i++] = 0x00; - fis[i++] = 0x00; - fis[i++] = 0x00; - return i; + fis[7] |= (plba[3] >> 24) & 0x0f; + } + + fis[8] = plba[3]; + fis[9] = plba[4]; + fis[10] = plba[5]; + fis[11] = (UCHAR)(feature>>8) & 0xff; + + fis[12] = (UCHAR)count & 0xff; + fis[13] = (UCHAR)(count>>8) & 0xff; + fis[14] = 0x00; + fis[15] = IDE_DC_A_4BIT; + + fis[16] = 0x00; + fis[17] = 0x00; + fis[18] = 0x00; + fis[19] = 0x00; + return 20; } // end UniataAhciSetupFIS()
Modified: trunk/reactos/drivers/storage/ide/uniata/idedma.rc URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/idedma.rc [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/idedma.rc [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -12,7 +12,7 @@ #define REACTOS_STR_FILE_VERSION VERSION_STR #define REACTOS_STR_INTERNAL_NAME "uniata.sys" #define REACTOS_STR_ORIGINAL_FILENAME "uniata.sys" -#define REACTOS_STR_LEGAL_COPYRIGHT "Copyright 1999-2004 AlterWare, Copyright 2007 ReactOS Team" +#define REACTOS_STR_LEGAL_COPYRIGHT "Copyright 1999-2008 AlterWare, Copyright 2007 ReactOS Team" #define REACTOS_STR_PRODUCT_NAME "UniATA Driver for ReactOS" #define REACTOS_STR_PRODUCT_VERSION VERSION_STR
Modified: trunk/reactos/drivers/storage/ide/uniata/inc/CrossNt.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/inc/CrossNt.h [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/inc/CrossNt.h [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -7,7 +7,7 @@
#if !defined(NT_INCLUDED) #include <ntddk.h> // various NT definitions -#endif +#endif
#include <stddef.h> #include <string.h>
Modified: trunk/reactos/drivers/storage/ide/uniata/ntddk_ex.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/ntddk_ex.h [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/ntddk_ex.h [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -8,6 +8,11 @@ #undef ASSERT #define ASSERT //(x) if (!(x)) {RtlAssert("#x",__FILE__,__LINE__, ""); } #endif //__REACTOS__ + + +#ifndef FILE_CHARACTERISTIC_PNP_DEVICE // DDK 2003 + +#define FILE_CHARACTERISTIC_PNP_DEVICE 0x00000800
typedef enum _SYSTEM_INFORMATION_CLASS { SystemBasicInformation, @@ -125,6 +130,8 @@ #endif //__REACTOS__ } SYSTEM_INFORMATION_CLASS;
+#endif // !FILE_CHARACTERISTIC_PNP_DEVICE +
NTSYSAPI NTSTATUS
Modified: trunk/reactos/drivers/storage/ide/uniata/uniata.rbuild URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/uniata.rbuild [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/uniata.rbuild [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -4,6 +4,7 @@ <bootstrap installbase="$(CDOUTPUT)" /> <include base="uniata">.</include> <include base="uniata">inc</include> + <define name="_DEBUG" /> <library>ntoskrnl</library> <library>hal</library> <library>scsiport</library>
Modified: trunk/reactos/drivers/storage/ide/uniata/uniata_ver.h URL: http://svn.reactos.org/svn/reactos/trunk/reactos/drivers/storage/ide/uniata/... ============================================================================== --- trunk/reactos/drivers/storage/ide/uniata/uniata_ver.h [iso-8859-1] (original) +++ trunk/reactos/drivers/storage/ide/uniata/uniata_ver.h [iso-8859-1] Fri Nov 28 03:02:24 2008 @@ -1,6 +1,6 @@ -#define UNIATA_VER_STR "39f" -#define UNIATA_VER_DOT 0.39.6.0 -#define UNIATA_VER_DOT_COMMA 0,39,6,0 -#define UNIATA_VER_DOT_STR "0.39.6.0" -#define UNIATA_VER_YEAR 2007 -#define UNIATA_VER_YEAR_STR "2007" +#define UNIATA_VER_STR "39j" +#define UNIATA_VER_DOT 0.39.10.0 +#define UNIATA_VER_DOT_COMMA 0,39,10,0 +#define UNIATA_VER_DOT_STR "0.39.10.0" +#define UNIATA_VER_YEAR 2008 +#define UNIATA_VER_YEAR_STR "2008"
-
dreimer＠svn.reactos.org