I wrote on ~Feb 24 that has a problem booting ROS (binary dist. v0.2.0). JH
asked me for debug log, so after a small delay here it comes (my own comments
're prepended by dash #):
# running
# > loadros system32\ntoskrnl.exe system32\hal.dll /DEBUGPORT=SCREEN bootc.lst
# Now I'm in a blue screen & receiving next messages
# ...
DriverBase for \SystemRoot\System32\kbdus.dll: ce488000
(ntuser/input.c: 86) Win32K: Failed to open mouse
# although I have Microsoft-compartible mouse on COM1
LdrGetExportByOriginal (Original 167) = 76168223
LdrGetExportByOriginal (Original 71) = 76167600
LdrGetExportByOriginal (Original 151) = 76168a2c
LdrGetExportByOriginal (Original 328) = 7616948e
LdrGetExportByOriginal (Original 386) = 7616a345
LdrGetExportByOriginal (Original 332) = 761696da
LdrGetExportByOriginal (Original 334) = 7616979f
LdrGetExportByOriginal (Original 339) = 76169cc9
LdrGetExportByOriginal (Original 338) = 76169c6f
LdrGetExportByOriginal (Original 154) = 76168af2
LdrGetExportByOriginal (Original 169) = 76167fe6
LdrGetExportByOriginal (Original 73) = 76167b6a
LdrGetExportByOriginal (Original 152) = 76167ede
(NTDLL: ldr/utils.c: 2041) Failed to create or open dll section of
'wineoss.drv' (Status c0000135)
(NTDLL: ldr/utils.c: 1191) LdrGetExportByName(): failed to find
GetModuleHandle16
(NTDLL: ldr/utils.c: 1191) LdrGetExportByName(): failed to find LoadLibrary16
(NTDLL: ldr/utils.c: 2041) Failed to create or open dll section of
'msacm.drv' (Status c0000135)
(NTDLL: ldr/utils.c: 2041) Failed to create or open dll section of
'midimap.drv' (Status c0000135)
# after this point it hangs up
Can anybody deal with this? ROS is unpacked into c:\reactos (as should be),
loaded from clear DOS (which is itself booted from floppy). If you need more
info, ask.
One more problem: this log is handwritten from screen, I've no machine near
me to write a log to it through COMx, so how do I make ROS loader write log
to a file (you see, those errors appear after drives're detected)?
>The following programmes have failed to install:
Not all programs can currently run on RectOS.
But what me more wunder: ReactOS 0.2.0 runs Solitaire (with its own
cards.dll) perfect.
But ReactOS 0.2.1 fails to run it. It ends with kernel panic. (blue screen)
>Bug detected (code 1e param 0 0 0 0)
> KMODE_EXCEPTION_NOT_HANDLED
>
>Page Fault Exception: 14(0)
>Processor: 0 CS:EIP 8:cde8a020 <win32k: 34020>
>cr2 3 cr3 2a63000 Proc: c156d938 Pid: a <gvim61> Thrd: c156dbe0 Tid: 33
>DS 10 ES 10 FS 30 GS 10
>EAX: 00000000 EBX: 00000010 ECX: cdeb5460
>EDX: 00000000 EBP: ce577f04 ESI: 005274cc
>EDI: ce577f84 EFLAGS: 00010206 kESP ce577e70 kernel stack base ce575000
>ESP ce577e70
>Frames: <win32k: 34222> <win32k: 3385c> <ntoskrnl.exe: 32f7> Page fault at
>high IRQL was 2
>ExceptionRecord->ExceptionAddress = 0xc0001cf5
>KeBugCheckWithTf at ke/catch.c:168
>Bug detected (code 1e param 0 0 0 0)
> KMODE_EXCEPTION_NOT_HANDLED
>
>Recursive bug check halting now
Yes, something like this comes after starting Solitair on ROS 0.2.1. Only
the values are different.
An other point what me wonder is the standard-driver of ReactOS.
It seems, that ReactOS itself runs with the standard-driver (and I don't
have installed any other one) in 16 or 32 colors. And the resolution is very
low.
But at starting, the starting-picture with the ReactOS-logo seams to have a
lot of more colors then ReactOS, when it runs. And it seems that the logo
have a better resolution, then the running ReactOS.
Btw: To an other point: I think it would be nice, if you change cmd.exe so,
that an "dir" can - with or without an option, thats unimportant - show it
like an Win95/Win98 "dir".
On my computer ReactOS runs on the Win98-partition. And all file-names
existing so, in twi versions: In the long names version (VFat) and in 8+3
(DOS-FAT) version.
But after typing in "dir" it shows only the long versions.
And after typing in the option "dir /w" it shows only the 8+3 versions.
Would be nice, if there existing an option (or as default) where the long
version and 8+3 version are _both_ shown.
Is possible, that the NFS don't have a 8+3 part. So, then it would be nice,
that only on DOS/Win95/Win98 partitions the 8+3 files will be shown. And on
NFS filesystems only the long versins like yet.
Greatings
theuserbl
_________________________________________________________________
MSN Messenger - sehen, welche Freunde online sind!
http://www.msn.de/messenger Jetzt kostenlos downloaden und mitmachen!
Pentium 3 450Mhz 64mb ram Reactos 0.2.1
The following programmes have failed to install:
VIM 6.1
verifies - installer window (full screen) little window, click on yes button, then ros's command prompt window
comes up with the message " 460 error number: 2 press enter key to continue " . Hit enter, then installer screen comes
to front and then license window (Nullsoft Install System v1.95), click on agree and ros dies with the following
error messages:
Bug detected (code 1e param 0 0 0 0)
KMODE_EXCEPTION_NOT_HANDLED
Page Fault Exception: 14(0)
Processor: 0 CS:EIP 8:cde8a020 <win32k: 34020>
cr2 3 cr3 2a63000 Proc: c156d938 Pid: a <gvim61> Thrd: c156dbe0 Tid: 33
DS 10 ES 10 FS 30 GS 10
EAX: 00000000 EBX: 00000010 ECX: cdeb5460
EDX: 00000000 EBP: ce577f04 ESI: 005274cc
EDI: ce577f84 EFLAGS: 00010206 kESP ce577e70 kernel stack base ce575000
ESP ce577e70
Frames: <win32k: 34222> <win32k: 3385c> <ntoskrnl.exe: 32f7> Page fault at high IRQL was 2
ExceptionRecord->ExceptionAddress = 0xc0001cf5
KeBugCheckWithTf at ke/catch.c:168
Bug detected (code 1e param 0 0 0 0)
KMODE_EXCEPTION_NOT_HANDLED
Recursive bug check halting now
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CDex
installation screen (Nullsoft Install System v1.43) click on next button, then it crashes with the following error messages:
Bug detected (code 1e param 0 0 0 0)
KMODE_EXCEPTION_NOT_HANDLED
Page Fault Exception: 14(0)
Processor: 0 CS:EIP 8:cde8a020 <win32k: 34020>
cr2 3 cr3 25b8000 Proc: c1574110 Pid: c <cdex_140> Thrd: c15857a8 Tid: 37
DS 10 ES 10 FS 30 GS 10
EAX: 00000000 EBX: 00000010 ECX: cdeb5460
EDX: 00000000 EBP: ce199f04 ESI: 00519490
EDI: ce199f84 EFLAGS: 00010206 kESP ce199e70 kernel stack base ce197000
ESP ce199e70
Frames: <win32k: 34222> <win32k: 3385c> <ntoskrnl.exe: 32f7> Page fault at high IRQL was 2
ExceptionRecord->ExceptionAddress = 0xc0001cf5
KeBugCheckWithTf at ke/catch.c:168
Bug detected (code 1e param 0 0 0 0)
KMODE_EXCEPTION_NOT_HANDLED
Recursive bug check halting now
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The following progs also crash after one or two windows, with similar error messages, as above:
Crack Attack (nullsoft in v1.96) crashes
dia (nullsoft in v1.93) crashes
Ethereal (nullsoft in v1.98) crashes
Exodus (nullsoft in v1.98) crashes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have noticed that self extracting installers do not work in ros
I think that I have sent enough error messages in for installation failures on ros 0.2.1 ,
so I will not send any more for this release.
Regards,
jh
Pentium 3 450Mhz 64mb ram Reactos 0.2.1
I have successfully installed the following programmes from cd. I did not alter the suggested file path,
which was the normal C:\program files
tuxpaint:
This runs in ros, but as with some other programmes such as abiword, the buttons are not fully developed, also ' save ' does not work.
This installation failed in ros 0.2.0.
FileZilla 2.1.2:
This installed ok but rendered ros useless (but not locked up) after finishing installation.
It runs in ros, but I have not used it beyond the profile window.
These and other programmes can be found here: http://gnuwin.epfl.ch/apps/en/index.html
Regards,
jh
Dear ReactOs-Team,
first of all i have to tell you that you make a great job. Go on with it.
Unfortunately i have no skills in programming, but in computergraphics.
Of course the programming is now more important than the design. So i think that you
dont pay the design much attention now. But in this point i can help you - if
you want.
I started to make a new icon set for ReactOs (click on the link). I tried to
make it different from
Windows, but not too different. Just enough to see a difference, but also to
understand immediately
what the icons stand for, if you know Windows. They look very serious and have
not that
"colorful-mainstream-children-windows-xp" design... :-)
Notice: The icon for the unknown file types are changed right now by me. As you
can see in the forum on the website, there were advices for a better icon. I´ll
follow them.
http://www.rene.boyke.de/newicons.jpg
If you want, take a look. There are just three on the website. If you dont like
them, i will stop
designing more. If you do like them, i will go on with the work.
Of course they are all for free. Here is my eMail, if you are interested:
boyke-jura(a)stud-mailer.uni-marburg.de
greetings
>Hi,
>I have an old 486 DX2 66Mhz computer with 32MB memory 261MB hard drive
>which I have unzipped the ros binaries onto, they are in C:\reactos. When I
>run ros it prints info to screen up to checking drive ' C: ok ', the drive
>light continues flashing away for about 15 to 20 seconds, then ros dies
>with no error message and falls back to bios. No initialization screen is
>ever shown.
Have a look at
http://reactos.com:8080/archives/public/ros-general/2004-March/000824.html
Let your installation in C:\reactos and creating additionaly an floppy-disk
with freeloader.
Greatings
theuserbl
_________________________________________________________________
Wußten Sie, daß Sie Ihren Hotmail-Posteingang auch über den MSN Messenger
abrufen können? http://www.msn.de/messenger Jetzt kostenlos downloaden und
einfach testen!
Hi,
When I load abiword in ros, it displays most of the menus in german, with the exception of the words ' default EN_US '.
Is the ros explorer getting entangled with abiword ? If I run the very same abiword in win95, it displays in english.
I have tried the latest version from http://abiword.pchasm.org/builds/periodic/ and a older version that I have already got installed, both behave the same.
Regards,
jh
For your information , with this last patch , The display card "Matrox
mystique" is supported successfully by Reactos in real hardware.
(Pentium 233)
The Desktop has been displayed on the screen and I was able to select
start menu bar as a first basic test..
Thanks to filip and all others to have made this possible.
Regards
Gearrd
Hi!
Michael Fritscher, the owner of reactos.de.vu have published a screenshot of
ReactOS 0.2.1.
Have a look at:
http://fritscher.net/reactos/images/reactos.jpg
I think, it is nice to see, that after new versions of RectOS there comes
new screenshots to see the new features and more.
Greatings
theuserbl
_________________________________________________________________
MSN Messenger - sehen, welche Freunde online sind!
http://www.msn.de/messenger Jetzt kostenlos downloaden und mitmachen!
Hi,
I have an old 486 DX2 66Mhz computer with 32MB memory 261MB hard drive which I have unzipped the ros binaries onto, they are in C:\reactos. When I run ros it prints info to screen up to checking drive ' C: ok ', the drive light continues flashing away for about 15 to 20 seconds, then ros dies with no error message and falls back to bios. No initialization screen is ever shown.
regards,
jh