https://git.reactos.org/?p=reactos.git;a=commitdiff;h=1481df94abad5cc75a7f5…
commit 1481df94abad5cc75a7f5bdcd57273700b7c7dd2
Author: Thomas Faber <thomas.faber(a)reactos.org>
AuthorDate: Sat Jun 27 09:27:33 2020 +0200
Commit: Thomas Faber <thomas.faber(a)reactos.org>
CommitDate: Sat Jun 27 10:13:51 2020 +0200
[KMTESTS:EX] Use stricter checks for the UUID returned from ExUuidCreate.
* Check the entire version field
* Check the variant field
* Accept RPC_NT_UUID_LOCAL_ONLY, which is sometimes returned by Windows
* Repeat the test to show that these things happen every time
Based on a patch by Serge Gautherie.
---
modules/rostests/kmtests/ntos_ex/ExUuid.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/modules/rostests/kmtests/ntos_ex/ExUuid.c b/modules/rostests/kmtests/ntos_ex/ExUuid.c
index 2fb0bba8dc8..82bb27b6089 100644
--- a/modules/rostests/kmtests/ntos_ex/ExUuid.c
+++ b/modules/rostests/kmtests/ntos_ex/ExUuid.c
@@ -14,8 +14,14 @@ START_TEST(ExUuid)
{
UUID Uuid;
NTSTATUS Status;
+ ULONG i;
- Status = ExUuidCreate(&Uuid);
- ok(Status == STATUS_SUCCESS, "ExUuidCreate returned unexpected status: %lx\n", Status);
- ok((Uuid.Data3 & 0x1000) == 0x1000, "Invalid UUID version: %x\n", (Uuid.Data3 & 0xF000));
+ for (i = 0; i < 1000; i++)
+ {
+ Status = ExUuidCreate(&Uuid);
+ ok(Status == STATUS_SUCCESS || Status == RPC_NT_UUID_LOCAL_ONLY,
+ "ExUuidCreate returned unexpected status: 0x%lx\n", Status);
+ ok((Uuid.Data3 & 0xF000) == 0x1000, "Invalid UUID version: 0x%x\n", (Uuid.Data3 & 0xF000));
+ ok((Uuid.Data4[0] & 0xC0) == 0x80, "Invalid UUID variant: 0x%x\n", (Uuid.Data4[0] & 0xF0));
+ }
}
https://git.reactos.org/?p=reactos.git;a=commitdiff;h=8983adf967a696d054ccc…
commit 8983adf967a696d054ccca4e118df27e1b5ffa13
Author: Serge Gautherie <32623169+SergeGautherie(a)users.noreply.github.com>
AuthorDate: Fri Jun 26 19:03:01 2020 +0200
Commit: GitHub <noreply(a)github.com>
CommitDate: Fri Jun 26 20:03:01 2020 +0300
[FASTFAT_NEW] Sync to upstream 16022c5 (#2938)
---
drivers/filesystems/fastfat_new/README.md | 53 +++++++++++++++---------------
drivers/filesystems/fastfat_new/close.c | 10 +++---
drivers/filesystems/fastfat_new/devctrl.c | 2 +-
drivers/filesystems/fastfat_new/deviosup.c | 2 +-
drivers/filesystems/fastfat_new/fatinit.c | 4 +--
drivers/filesystems/fastfat_new/fsctrl.c | 44 +++++++++++++++++++------
drivers/filesystems/fastfat_new/volinfo.c | 41 ++++++++++++++---------
media/doc/README.FSD | 2 +-
8 files changed, 96 insertions(+), 62 deletions(-)
diff --git a/drivers/filesystems/fastfat_new/README.md b/drivers/filesystems/fastfat_new/README.md
index 801e3f73657..1c409ac7b6d 100644
--- a/drivers/filesystems/fastfat_new/README.md
+++ b/drivers/filesystems/fastfat_new/README.md
@@ -1,26 +1,24 @@
-<!---
- name: fastfat File System Driver
- platform: WDM
- language: cpp
- category: FileSystem
- description: A file system driver based on the Windows inbox FastFAT file system used as a model for new file systems.
- samplefwlink: http://go.microsoft.com/fwlink/p/?LinkId=620305
---->
-
-
-
-fastfat File System Driver
-==========================
+---
+page_type: sample
+description: "A file system driver based on the Windows inbox FastFAT file system used as a model for new file systems."
+languages:
+- cpp
+products:
+- windows
+- windows-wdk
+---
+
+# fastfat File System Driver
The *fastfat* sample is file system driver that you can use as a model to write new file systems.
*fastfat* is a complete file system that addresses various issues such as storing data on disk, interacting with the cache manager, and handling various I/O operations such as file creation, performing read/writes on a file, setting information on a file, and performing control operations on the file system.
## Universal Windows Driver Compliant
+
This sample builds a Universal Windows Driver. It uses only APIs and DDIs that are included in OneCoreUAP.
-Build the sample
-----------------
+## Build the sample
You can build the sample in two ways: using Microsoft Visual Studio or the command line (*MSBuild*).
@@ -30,25 +28,28 @@ You build a driver the same way you build any project or solution in Visual Stud
The default Solution build configuration is **Debug** and **Win32**.
-**To select a configuration and build a driver**
+#### To select a configuration and build a driver
-1. Open the driver project or solution in Visual Studio (find fastfat.sln or fastfat.vcxproj).
-2. Right-click the solution in the **Solutions Explorer** and select **Configuration Manager**.
-3. From the **Configuration Manager**, select the **Active Solution Configuration** (for example, Debug or Release) and the **Active Solution Platform** (for example, Win32) that correspond to the type of build you are interested in.
-4. From the Build menu, click **Build Solution** (Ctrl+Shift+B).
+1. Open the driver project or solution in Visual Studio (find fastfat.sln or fastfat.vcxproj).
+
+1. Right-click the solution in the **Solutions Explorer** and select **Configuration Manager**.
+
+1. From the **Configuration Manager**, select the **Active Solution Configuration** (for example, Debug or Release) and the **Active Solution Platform** (for example, Win32) that correspond to the type of build you are interested in.
+
+1. From the Build menu, click **Build Solution** (Ctrl+Shift+B).
### Building a Driver Using the Command Line (MSBuild)
You can build a driver from the command line using the Visual Studio Command Prompt window and the Microsoft Build Engine (MSBuild.exe) Previous versions of the WDK used the Windows Build utility (Build.exe) and provided separate build environment windows for each of the supported build configurations. You can now use the Visual Studio Command Prompt window for all build configurations.
-**To select a configuration and build a driver or an application**
+#### To select a configuration and build a driver or an application
+
+1. Open a Visual Studio Command Prompt window at the **Start** screen. From this window you can use MsBuild.exe to build any Visual Studio project by specifying the project (.VcxProj) or solutions (.Sln) file.
-1. Open a Visual Studio Command Prompt window at the **Start** screen. From this window you can use MsBuild.exe to build any Visual Studio project by specifying the project (.VcxProj) or solutions (.Sln) file.
-2. Navigate to the project directory and enter the **MSbuild** command for your target. For example, to perform a clean build of a Visual Studio driver project called *filtername*.vcxproj, navigate to the project directory and enter the following MSBuild command:
+1. Navigate to the project directory and enter the **MSbuild** command for your target. For example, to perform a clean build of a Visual Studio driver project called *filtername*.vcxproj, navigate to the project directory and enter the following MSBuild command:
- **msbuild /t:clean /t:build .\\fastfat.vcxproj**.
+`msbuild /t:clean /t:build .\\fastfat.vcxproj`
-Installation
-------------
+## Installation
No INF file is provided with this sample because the *fastfat* file system driver (fastfat.sys) is already part of the Windows operating system. You can build a private version of this file system and use it as a replacement for the native driver.
diff --git a/drivers/filesystems/fastfat_new/close.c b/drivers/filesystems/fastfat_new/close.c
index 7e9ac2d4ad3..e92aad02285 100644
--- a/drivers/filesystems/fastfat_new/close.c
+++ b/drivers/filesystems/fastfat_new/close.c
@@ -299,7 +299,7 @@ Return Value:
//
// We had some trouble trying to perform the requested
// operation, so we'll abort the I/O request with the
- // error status that we get back from the execption code.
+ // error status that we get back from the exception code.
//
Status = FatProcessException( NULL, Irp, _SEH2_GetExceptionCode() );
@@ -669,7 +669,7 @@ Return Value:
//
// If the queues are above the limits by a significant amount, we have
- // to try hard to pull them down. To do this, we will aggresively try
+ // to try hard to pull them down. To do this, we will aggressively try
// to find closes for the last volume the caller looked at. This will
// make sure we fully utilize the acquisition of the volume, which can
// be a hugely expensive resource to get (create/close/cleanup use it
@@ -884,7 +884,7 @@ Return Value:
DebugTrace(+1, Dbg, "FatCommonClose...\n", 0);
//
- // Initailize the callers variable, if needed.
+ // Initialize the callers variable, if needed.
//
LocalVcbDeleted = FALSE;
@@ -1082,7 +1082,7 @@ Return Value:
//
// Dereference the directory file. This may cause a close
- // Irp to be processed, so we need to do this before we destory
+ // Irp to be processed, so we need to do this before we destroy
// the Fcb.
//
@@ -1210,7 +1210,7 @@ Return Value:
//
// We need the global lock, which must be acquired before the
// VCB. Since we already have the VCB, we have to drop and
- // reaquire here. Note that we always want to wait from this
+ // reacquire here. Note that we always want to wait from this
// point on. Note that the VCB cannot go away, since we have
// biased the open file count.
//
diff --git a/drivers/filesystems/fastfat_new/devctrl.c b/drivers/filesystems/fastfat_new/devctrl.c
index 7cfa954440e..0abbcec6764 100644
--- a/drivers/filesystems/fastfat_new/devctrl.c
+++ b/drivers/filesystems/fastfat_new/devctrl.c
@@ -99,7 +99,7 @@ Return Value:
// We had some trouble trying to perform the requested
// operation, so we'll abort the I/O request with
// the error status that we get back from the
- // execption code
+ // exception code
//
Status = FatProcessException( IrpContext, Irp, _SEH2_GetExceptionCode() );
diff --git a/drivers/filesystems/fastfat_new/deviosup.c b/drivers/filesystems/fastfat_new/deviosup.c
index 17462d8704b..a1712a396a6 100644
--- a/drivers/filesystems/fastfat_new/deviosup.c
+++ b/drivers/filesystems/fastfat_new/deviosup.c
@@ -3814,7 +3814,7 @@ Return Value:
//
// It would be nice if Mm exported a way for us to not have
// to pull the Mdl apart and rebuild it ourselves, but this
- // is so bizzare a purpose as to be tolerable.
+ // is so bizarre a purpose as to be tolerable.
//
SavedByteCount = ZeroMdl->ByteCount;
diff --git a/drivers/filesystems/fastfat_new/fatinit.c b/drivers/filesystems/fastfat_new/fatinit.c
index b09339640d5..09df201769f 100644
--- a/drivers/filesystems/fastfat_new/fatinit.c
+++ b/drivers/filesystems/fastfat_new/fatinit.c
@@ -632,14 +632,14 @@ FatIsFujitsuFMR (
Routine Description:
- This routine tells if is we running on a FujitsuFMR machine.
+ This routine tells us if we are running on a FujitsuFMR machine.
Arguments:
Return Value:
- BOOLEAN - TRUE is we are and FALSE otherwise
+ BOOLEAN - TRUE if we are and FALSE otherwise
--*/
diff --git a/drivers/filesystems/fastfat_new/fsctrl.c b/drivers/filesystems/fastfat_new/fsctrl.c
index 0938dcc63e9..d5ec06b3155 100644
--- a/drivers/filesystems/fastfat_new/fsctrl.c
+++ b/drivers/filesystems/fastfat_new/fsctrl.c
@@ -1422,22 +1422,34 @@ Return Value:
if (Dirent != NULL) {
+ UCHAR OemBuffer[11];
OEM_STRING OemString;
UNICODE_STRING UnicodeString;
+ OemString.Buffer = (PCHAR)&OemBuffer[0];
+ OemString.MaximumLength = 11;
+
+ RtlCopyMemory( OemString.Buffer, Dirent->FileName, 11 );
+
//
- // Compute the length of the volume name
+ // Translate the first character from 0x5 to 0xe5.
//
- OemString.Buffer = (PCHAR)&Dirent->FileName[0];
- OemString.MaximumLength = 11;
+ if (OemString.Buffer[0] == FAT_DIRENT_REALLY_0E5) {
+
+ OemString.Buffer[0] = 0xe5;
+ }
+
+ //
+ // Compute the length of the volume name
+ //
for ( OemString.Length = 11;
OemString.Length > 0;
OemString.Length -= 1) {
- if ( (Dirent->FileName[OemString.Length-1] != 0x00) &&
- (Dirent->FileName[OemString.Length-1] != 0x20) ) { break; }
+ if ( (OemString.Buffer[OemString.Length-1] != 0x00) &&
+ (OemString.Buffer[OemString.Length-1] != 0x20) ) { break; }
}
UnicodeString.MaximumLength = MAXIMUM_VOLUME_LABEL_LENGTH;
@@ -7849,6 +7861,7 @@ Return Value:
PDIRENT Dirent;
PDIRENT TerminationDirent;
ULONG VolumeLabelLength;
+ UCHAR OemBuffer[11];
OEM_STRING OemString;
UNICODE_STRING UnicodeString;
@@ -7895,19 +7908,30 @@ Return Value:
}
+ OemString.Buffer = (PCHAR)&OemBuffer[0];
+ OemString.MaximumLength = 11;
+
+ RtlCopyMemory( OemString.Buffer, Dirent->FileName, 11 );
+
//
- // Compute the length of the volume name
+ // Translate the first character from 0x5 to 0xe5.
//
- OemString.Buffer = (PCHAR)&Dirent->FileName[0];
- OemString.MaximumLength = 11;
+ if (OemString.Buffer[0] == FAT_DIRENT_REALLY_0E5) {
+
+ OemString.Buffer[0] = 0xe5;
+ }
+
+ //
+ // Compute the length of the volume name
+ //
for ( OemString.Length = 11;
OemString.Length > 0;
OemString.Length -= 1) {
- if ( (Dirent->FileName[OemString.Length-1] != 0x00) &&
- (Dirent->FileName[OemString.Length-1] != 0x20) ) { break; }
+ if ( (OemString.Buffer[OemString.Length-1] != 0x00) &&
+ (OemString.Buffer[OemString.Length-1] != 0x20) ) { break; }
}
UnicodeString.MaximumLength = sizeof( UnicodeBuffer );
diff --git a/drivers/filesystems/fastfat_new/volinfo.c b/drivers/filesystems/fastfat_new/volinfo.c
index be38ac9aa94..c9f76aa7625 100644
--- a/drivers/filesystems/fastfat_new/volinfo.c
+++ b/drivers/filesystems/fastfat_new/volinfo.c
@@ -155,7 +155,7 @@ Return Value:
// We had some trouble trying to perform the requested
// operation, so we'll abort the I/O request with
// the error status that we get back from the
- // execption code
+ // exception code
//
Status = FatProcessException( IrpContext, Irp, _SEH2_GetExceptionCode() );
@@ -236,7 +236,7 @@ Return Value:
// We had some trouble trying to perform the requested
// operation, so we'll abort the I/O request with
// the error status that we get back from the
- // execption code
+ // exception code
//
Status = FatProcessException( IrpContext, Irp, _SEH2_GetExceptionCode() );
@@ -331,7 +331,7 @@ Return Value:
//
// Make sure the vcb is in a usable condition. This will raise
- // and error condition if the volume is unusable
+ // an error condition if the volume is unusable
//
// Also verify the Root Dcb since we need info from there.
//
@@ -526,7 +526,7 @@ Return Value:
//
// Make sure the vcb is in a usable condition. This will raise
- // and error condition if the volume is unusable
+ // an error condition if the volume is unusable
//
// Also verify the Root Dcb since we need info from there.
//
@@ -598,8 +598,8 @@ Arguments:
Buffer - Supplies a pointer to the output buffer where the information
is to be returned
- Length - Supplies the length of the buffer in byte. This variable
- upon return recieves the remaining bytes free in the buffer
+ Length - Supplies the length of the buffer in bytes. This variable
+ upon return receives the remaining bytes free in the buffer
Return Value:
@@ -692,8 +692,8 @@ Arguments:
Buffer - Supplies a pointer to the output buffer where the information
is to be returned
- Length - Supplies the length of the buffer in byte. This variable
- upon return recieves the remaining bytes free in the buffer
+ Length - Supplies the length of the buffer in bytes. This variable
+ upon return receives the remaining bytes free in the buffer
Return Value:
@@ -761,8 +761,8 @@ Arguments:
Buffer - Supplies a pointer to the output buffer where the information
is to be returned
- Length - Supplies the length of the buffer in byte. This variable
- upon return recieves the remaining bytes free in the buffer
+ Length - Supplies the length of the buffer in bytes. This variable
+ upon return receives the remaining bytes free in the buffer
Return Value:
@@ -826,8 +826,8 @@ Arguments:
Buffer - Supplies a pointer to the output buffer where the information
is to be returned
- Length - Supplies the length of the buffer in byte. This variable
- upon return recieves the remaining bytes free in the buffer
+ Length - Supplies the length of the buffer in bytes. This variable
+ upon return receives the remaining bytes free in the buffer
Return Value:
@@ -949,8 +949,8 @@ Arguments:
Buffer - Supplies a pointer to the output buffer where the information
is to be returned
- Length - Supplies the length of the buffer in byte. This variable
- upon return recieves the remaining bytes free in the buffer
+ Length - Supplies the length of the buffer in bytes. This variable
+ upon return receives the remaining bytes free in the buffer
Return Value:
@@ -1067,7 +1067,7 @@ Return Value:
//
// Volume label that fits in 11 unicode character length limit
- // is not necessary within 11 characters in OEM character set.
+ // is not necessarily within 11 characters in OEM character set.
//
if (!NT_SUCCESS( Status )) {
@@ -1159,6 +1159,15 @@ Return Value:
if (OemLabel.Length > 0) {
+ //
+ // Translate the first character from 0xe5 to 0x5.
+ //
+
+ if ((UCHAR)OemLabel.Buffer[0] == 0xe5) {
+
+ OemLabel.Buffer[0] = FAT_DIRENT_REALLY_0E5;
+ }
+
//
// Locate the volume label if there already is one
//
@@ -1326,7 +1335,7 @@ Arguments:
Buffer - Supplies a pointer to the output buffer where the information
is to be returned
- Length - Supplies the length of the buffer in byte. This variable
+ Length - Supplies the length of the buffer in bytes. This variable
upon return receives the remaining bytes free in the buffer
Return Value:
diff --git a/media/doc/README.FSD b/media/doc/README.FSD
index 5071e3cc1f5..83137d81a5c 100644
--- a/media/doc/README.FSD
+++ b/media/doc/README.FSD
@@ -19,7 +19,7 @@ drivers/filesystems/reiserfs # Synced to 0.26
The following FSD are shared with: https://github.com/Microsoft/Windows-driver-samples
drivers/filesystems/cdfs # Synced to f73e552
-drivers/filesystems/fastfat_new # Synced to 2817004
+drivers/filesystems/fastfat_new # Synced to 16022c5
drivers/storage/class/disk_new # Forked. (Imported on 2012.01.26 (r55211, from Windows XP DDK), merged to trunk on 2012.02.12 (r55555).)
drivers/storage/floppy_new # Synced to 8fb512a