Re: Re[2]: [ros-general] Booting problem: ROS hangs up after disks check

[Aleksey Bragin]

----- Original Message ----- 
From: "Kyryll A Mirnenko" <mirya(a)ukrpost.net>
To: "jh" <replies(a)mrnobody.uklinux.net>et>; <ros-general(a)reactos.com>
Sent: Monday, February 23, 2004 11:53 PM
Subject: Re[2]: [ros-general] Booting problem: ROS hangs up after disks
check

-= skip =-
>   j> Running ros for the first time is like running
> windows for the first 
time, you have to reboot again before you can use it.
>  
>  Was that normal it hung up in a blue sceen after D: drive check? There
>  were no messages, after hardware reboot everything was the same -
>  hanging up after last FAT32 drive check. 
Certainly it isn't. But actually ROS
doesn't really check drives,
autochk.exe is just a stub for now. So the problem is further - when loading
drivers probably.

>   As I said, I've got UFS (FreeBSD) partition after
> that last drive it
>  checks & hangs up, my version is that it's confused by it. Another
>  version is DMA-less harddisk (although ATAPI v4) 
ReactOS doesn't use DMA to
access HardDisk now at all (correct me if I'm
wrong - I'm not so into harddisk drivers stuff).

>   Hope, somebody'll help,
>  mirya 
You know, you should definately enable debug output (edit your freeldr.ini ,
in [ReactOS] section, in Options=/DEBUG /DEBUGPORT=COM1 /BAUDRATE=115200).
And you can watch debug messages both on the screen and on the COM port.
Then you can tell us more precisely what your problem is, and we can find a
fix for this.


With the best regards,
Aleksey Bragin.